EXPERIMENTAL INVESTIGATION ON R134A AIRBORNE VAPOR-COMPRESSION REFRIGERATION SYSTEM

The airborne high power electrical equipments have been widely used in modern aircrafts , which consequently causes the dramatic increase of heating load up to dozens of kilowatts.Accordingly , vapor-compression refrigeration system ( VCRS ) with lower engine bleed air and larger refrigeration capacity has been paid much attention in recent years.Therefore , based on the analysis of the characteristics of VCRS , an experiment system of VCRS using R134ais set up to simulate operation performances.The influences of different parameters including evaporation pressure , condensing pressure , refrigerant mass flow rate and compressor rotation speed are also investigated.The impacts of different parameters on the system performance are various.This work can help to establish the specific control law under different work conditions.

Entropy Analysis of Vapor-Compression Refrigeration System by Using the Second Law of Thermodynamics

By means of the Second Law of Thermodynamics,thispaper gives out the entropy analysis method for vapor-comperession refrigeration system.The thermal irrevers-ibility of the system charged with R12 and its hopeful al-ternative refrlgerant R134a have been studied respective-ly.On the basis of all the research results of this paper,the measure used to save energy for vapor-compressionrefrigeration system has been put out.

Effect of an Internal Heat Exchanger on the Performances of a Double Evaporator Ejector Refrigeration Cycle

A theoretical investigation is presented about a double evaporator ejector refrigeration cycle(DEERC).Special attention is paid to take into account the influence of the sub-cooling and superheating effects induced by an internal heat exchanger(IHX).The ejector is introduced into the baseline cycle in order to mitigate the throttling process losses and increase the compressor suction pressure.Moreover,the IHX has the structure of a concentric counter-flow type heat exchanger and is intentionally used to ensure that the fluid at the compressor inlet is vapor.To assess accurately the influence of the IHX on the DEERC performance,a mathematical model is derived in the frame of the dominant one-dimensional theory for ejectors.The model also accounts for the friction effect in the ejector mixing section.The equations of this model are solved using an Engineering Equation Solver(EES)for different fluids.These are:R134a as baseline fluid and other environment friendly refrigerants used for comparison,namely,R1234yf,R1234ze,R600,R600a,R290,R717 and R1270.The simulation results show that the DEERC with an IHX can achieve COP(the coefficient of performance)improvements from 5.2 until 10%.

Performance Analysis of a Solar Continuous Adsorption Refrigeration System

A study is conducted on the performances of a solar powered continuous-adsorption refrigerator considering two particular days as references cases,namely,the summer solstice(June 21st)and the autumn equinox(September 21st).The cooling capacity,system performance coefficient and the daily rate of available cooling energy are assessed.The main goal is to compare the performances of a solar adsorption chiller equipped with a hot water tank(HWT)with an equivalent system relying on solar collectors with no heat storage module.The daily cooling rates for the solar refrigerator are found to be 102.4 kWh and 74.3 kWh,respectively,on June 21st and on September 21st,using a total collector’s area of 43.47 m2.The corresponding values for the adsorption chiller equipped with a hot water tank of 2 m3(and using a total collector’s area of 72.45 m2),are 127.1 kWh and 106.13 kWh,respectively.

Experimental Study of Air Conditioning Unit of Evaporative Cooling Assisted Mechanical Refrigeration

The evaporative cooling,which assists the refrigeration machinery air-conditioning systems test-rig,has been designed.Its structure and working principle were described,and the performance test was conducted and analyzed.The test shows that making full use of the evaporative cooling "free cooling" in Spring and Autumn seasons can fully meet the requirements of air-conditioned comfort through the switch of the function in different seasons.Taking into account the evaporative cooling fan and pump energy consumption,compared with the traditional mechanical refrigeration system,more than 80 percent of energy can be saved,and the energy efficiency ratio of the Unit(EER)is as high as 7.63.Using the two stages of indirect evaporative cooling to pre-cool the new wind in summer,under the conditions of the same air supply temperature requirements,0.83 kg/s chilled water saved can be equivalent to the traditional mechanical refrigeration system,and when the new wind ratio up to 50 percent,more than 10 percent load was reduced in mechanical refrigeration system.The overall EER increased about 35 percent.

Breakdown characteristics of CF4 and CF4/N2 hybrid gas in refrigeration temperature range

Common insulation gas cannot normally work in refrigeration temperature range(153-243 K), especially in extremely cold regions. To solve this problem, this essay uses cubic equation combined with two-parameter model in theorem of corresponding states to estimate dew-point of hybrid gas. The influence of temperature on mixing ratio is studied by using van der Waals equation. The result shows that the mixing ratio is stable during temperature-fall period. Insulation property of CF_4 and CF_4/N_2 in refrigeration temperature range is studied through self-designed low-temperature test system. The result shows when the density of hybrid gas is invariable, temperature changing has less influence on breakdown voltage, and when the mixing ratio is 20%, CF_4/N_2 is the greatest potential hybrid gas.

Research of refrigeration system for a new type of constant temperature hydraulic tank

Different from the traditional hydraulic oil cooling method,a new type of constant temperature oil tank cooling system based on semiconductor refrigeration technology is designed. This paper studies the principle of semiconductor refrigeration and establishes a heat transfer model. Semiconductor cooler on piping refrigeration is simulated,and influence of the parameters on the outlet temperature,such as pipe pressure difference of inlet and outlet,pipe length,pipe radius,are gotten,and then hydraulic tank semiconductor refrigeration system is proposed. The semiconductor refrigeration system can control temperature at 37 ± 1°C.

Exergy Analysis of a Double-Effect Solar Absorption Refrigeration System in Ngaoundere

Solar energy is replacing more and more traditional sources of energy because of the fact that it’s also fighting about global warming. This study is based on exergy analysis of a double-effect series flow absorption refrigeration system powered by solar energy in Ngaoundere. The simulation is done on the basis of a half hourly analysis for the first time, from 6.30 AM to 6.30 PM, using water-lithium bromide as working pair. The main parameters for the performance of an absorption cycle, which are the COP and the ECOP, have been analyzed and the results show that this two parameters increase while increasing the temperature of the main generator. The exergy loss of each component of the system and the total exergy loss of the system have been analyzed and their effectiveness calculated, using the first and second law of thermodynamics. The highest exergy loss occurs in the main generator GI and in the absorber, making these components more important in an absorption cycle. This analysis is based on a mathematical model using FORTRAN?language. The results obtained may be useful for the optimization of solar absorption refrigeration systems.

Experimental Analysis of the Performances of Unit Refrigeration Systems Based on Parallel Compressors with Consideration of the Volumetric and Isentropic Efficiency

The performances of a refrigeration unit relying on compressors working in parallel have been investigated considering the influence of the compressor volumetric efficiency and isentropic efficiency on the compression ratio.Moreover,the following influential factors have been taken into account:evaporation temperature,condensation temperature and compressor suction-exhaust pressure ratio for different opening conditions of the compressor.The following quantities have been selected as the unit performance measurement indicators:refrigeration capacity,energy efficiency ratio(COP),compressor power consumption,and refrigerant flow rate.The experimental results indicate that the system refrigeration capacity and COP decrease with a decrease in evaporation temperature,increase of condensation temperature,and increase in pressure ratio.The refrigerant flow rate increases with the increase in evaporation temperature,decrease in condensing temperature and increase in pressure ratio.The compressor power consumption increases with the increase in condensing temperature and increase in pressure ratio,but is not significantly affected by the evaporation temperature.

Design of structure and control system of semiconductor refrigeration box

In order to create low temperature environment for the valve testing,a new type of semiconductor refrigeration box based on semiconductor refrigeration chip and programmable logic controller(PLC)control system is designed.The power of the semiconductor refrigeration chip is determined by calculating the heat dissipation characteristics of the semiconductor refrigeration box.Combining natural convection heat dissipation with forced air cooling,the heat sink of semiconductor refrigeration chip is designed.In the control strategy,switch control is combined with an intelligent control strategy.Adaptive single neuron optimization algorithm based on quadratic optimization is adopted to adjust and optimize the parameters of the proportional-integral-derivative(PID)controllers in real time.Taking into account the limited hardware capabilities of the PLC,the Jacobian information in parameter adjustment is redesigned into a simplified form of identification.The actual test results of refrigeration box show good control performance.

Study on Application of Mixed-Refrigerant Refrigeration in Ethylene Plant

这份报纸集中于在采用顺序分离进程流动和 lowpressure demethanization 系统的 120 kt/a 乙烯植物上在乙烯 plant.Based 的低温实验法的分离节被使用的混合致冷的制冷进程流动，三制冷进程的精力消费流动(典型串联制冷，二进制制冷和第三级的制冷)借助于 ASPEN 正模拟 software.An

Recent Progress of Magnetic Refrigeration Technique Near Room Temperature

The recent progress of magnetic refrigeration technique at room temperature, especially in magnetic refrigerant materials with respect to Gd-Si-Ge, La-Fe-Si, Mn-Fe-P-As which has GMCE was reported. Also the recent progress in magnetic refrigerator design was reviewed.

Study on Gd-Al-Dy System Magnetic Refrigeration Materials

ＳｔｕｄｙｏｎＧｄＡｌＤｙＳｙｓｔｅｍＭａｇｎｅｔｉｃＲｅｆｒｉｇｅｒａｔｉｏｎＭａｔｅｒｉａｌｓＣｈａｎｇＸｉｕｍｉｎ，ＹａｎＪｕｎｌｉａｎ（常秀敏）（闫俊联）ＢｅｉｊｉｎｇＧｅｎｅｒａｌＲｅｓｅａｒｃｈＩｎｓｔｉｔｕｔｅｆｏｒＮｏｎｆｅｒｒ...

A DYNAMIC MODEL OF THE SOLAR-POWERED SOLID ABSORPTION REFRIGERATION SYSTEM

A dynamic model is established for the solar-powered solid-absorptionrefrigeration system using CaCl2 and NH3 as working pair. The reaction front assump-tion is taken to calculate the heat transfer process in this model. This assumption as-sumes that des

Development of magnetocaloric materials in room temperature magnetic refrigeration application in recent six years

Some magnetocaloric materials were used successfully in magnetic refrigeration application and became one of the critical parts of magnetic refrigeration technology whose delightful progresses were made worldwide in the past 30 years. At the same time, the research on giant magnetocaloric materials will accelerate the development of room temperature magnetic refrigeration. In this paper, the new theoretical and experimental investigations on magnetic materials in room temperature application were described, including Gd and its binary and ternary intermetallic compounds, Mn-based compounds, La(Fe13-xMx)-based compounds and manganites. Based on the analysis of hysteresis, corrosion, cost and heat process, the comparison between different families of magnetic materials was discussed. Further research of room temperature magnetic refrigerant was suggested.

Experiments on an Open-Loop Cycle Carbon Dioxide Refrigeration System

An open loop cycle carbon dioxide(CO2)refrigeration system is established,and the cooling performances of high-pressure CO2 under different storage conditions(25℃,30℃,and 35℃)are investigated.Moreover,the experimental mass flow rates of CO2 are compared with the theoretical values at different conditions and refrigeration capacities.The results indicate that the storage condition of CO2 has a significant impact on the refrigeration performance,and the mass flow rate of CO2 increases with the increasing storage temperature in a given refrigeration capacity.

The mass and heat transfer process through the door seal of refrigeration

As one of the main reasons causing leakage heat load in a refrigerator,mass and heat transfer through refrigerator door seal is of great importance to be studied.In this paper,a model is presented for numerical simulation of mass and heat transfer process through refrigerator door seal,and an experiment apparatus is designed and set up as well for comparison.A two-dimensional model and tracer gas method are used in simulation and experiment,respectively.It can be found that the relative deviations of air infiltration rate between the simulated results and experimental results were less than 1%,and the temperature difference errors at two special points of the door seal were less than 2.03℃.In conclusion,the simulated results are in good agreement with the experimental results.This paper initially sets up a model that can accurately simulate the heat and mass transfer through the refrigerator door seal,and the model can be used in refrigerator door seal optimization research in the follow-up study.

Computer Simulation of an Ammonia-Water Absorption Cycle for Refrigeration: Using a Distillation Tower to Replace the Generator

By using a distillation tower as the regenerator, the coefficient of performance (COP) of the ammonia-water absorption refrigeration cycle is calculated in this work. Two types of distillation towers, namely an equilibrium-stage tower with a total condenser and a packed-bed tower with a partial condenser, are used in the cycle. From the simulation results, it is found that both types of distillation towers can successfully increase the COP of the cycle due to increased ammonia concentration in the vapor phase of the ammonia-water refrigerant. It was also found that the tower equipped with a partial condenser provides higher COP than that of the tower equipped with a total condenser. The value of COP can be further increased when the generator is replaced by the packed-bed tower in this water-ammonia absorption cycle. The effects of the mass flow rate ratio of NH3/H2O, stage number, reflux ratio and energy duty of the tower on the COP of the cycle are also studied in the present paper.

Novel Cascade Refrigeration Cycle for Cold Supply Chain of COVID-19 Vaccines at Ultra-Low Temperature -80°C Using Ethane (R170) Based Hydrocarbon Pair

Several media report highlight on that the pharmaceutical companies require ultra-low temperatures -80°C to transport and store its COVID-19 vaccines. This research presents the thermodynamic analysis on cascade refrigeration system (CRS) with several refrigerant pairs which are R32/R170, R123/R170, R134a/R170, R404A/R170, R407c/R170, R410/R170, and the hydrocarbon (HC) refrigerant pair Propane/Ethane, namely R290/R170. Besides, the results of R22/R170 pair, which is not recommended to be used due to phase out of R22 as per Montréal Protocol, are included as base case to compare the novel hydrocarbon pairs in CRS and the old trend of refrigerant pairs. Thermodynamic properties of all these pairs were investigated and compared under different intermediate temperature used in CRS heat exchanger, which thermally connected both the Low and High temperature cycles (LTC) and (HTC). By applying the first law of thermodynamics, the coefficients of performance (COPs) and the specific power consumptions (SPC) in kW/TR are presented and compared. In addition, by applying the second law of thermodynamics the exergetic efficiencies were estimated. The results reveal the promising opportunity of using the HC pair (R290/R170). The minimum SPC in kW/TR is recorded for the pair R123/R170. One the other hand, the highest exegetic efficiency values are observed to be 40%, 38%, and 35% for the pairs R123/R170, R290/R170, and R134/R170, respectively. This research concludes that the HC pair (R290/R170) is highly recommended for CRS applications either to transport the COVID-19 or store it in cold storage rooms in hospitals and clinics. All precautionary measures should be carefully applied in design and operation of HC pair (R290/R170) due to its flammability hazard.

Exergy Analysis of a Solar Absorption Refrigeration System in Ngaoundere

In this study, the first and second laws of thermodynamics are used to analyze the performance of a single-stage absorption refrigeration system powered by solar energy. The working pair used in this study is LiBr-H2O where water (H2O) is the refrigerant and the lithium bromide (LiBr) is the absorbent. A mathematical model based on exergy analysis is applied to analyse the system performance. Temperature, enthalpy, entropy, mass flow rate and exergy loss of each component including evacuated tube solar collector are evaluated. Furthermore, the overall coefficient of performance (COPcooling) and the overall exergetic coefficient of performance (ECOPcooling) of the solar absorption system (absorption system coupled to an evacuated tube solar collector) for cooling purpose are calculated from the thermodynamic properties of the working fluids under weather conditions of Ngaoundere city, Cameroon. The calculations were done on the basis of a half hourly analysis from 6:30 AM to 6:30 PM. The results were compared and they show that the exergy destruction highly occurs in the generator and the solar collector. The simulation results can be used for the thermodynamics optimization of solar absorption refrigeration systems.