Vapor-liquid equilibrium modeling for binary system of R152a/R1234ze(E)

At present,the environment impact of refrigerants has been given attention.The binary mixture R152a/R1234ze(E)is an environmentally friendly refrigerant,which solves problems of poor cooling performance of the R1234ze(E)cycle and flammability of R152a.In order to obtain its basic thermal and physical parameters,it is necessary to carry out vapor-liquid equilibrium(VLE)research,and the cubic equation of states(EOS)is often used in the calculation of the thermodynamic properties of mixtures.In this paper,the VLE predicted models for R152a/R1234ze(E)in the temperature range of 298.15-328.15 K were constructed using Soave-Redlich-Kwong(SRK),Peng-Robinson(PR)equations of state(EOS)combined with van der Waals(vd W),Huron-Vidal(HV)mixing rules,respectively.The equilibrium pressures and vapor-phase mole fractions of the models were obtained by calculation,and all four models presented an extreme correlation with the experimental data.And it can be concluded that the calculated results of the PR+HV model are closer to the experimental data than those of the other three models,with the average absolute deviation of 0.0027 for vapor-phase mole fraction(AAD(ycal))and the average absolute relative deviation of 0.243%for equilibrium pressure(AARD(pcal)),which provides a basis for accurately calculating the thermophysical properties of the mixture R152a/R1234ze(E).

VAPOR-LIQUID EQUILIBRIA FOR PROPYLENE -METHANOL-WATER SYSTEM

In this article VLE data for a ternary system (propylene-methanol-water) under 30～60 C,0. 3～0. 9 MPa with a mass ratio of methanol to water of 9:1, 8: 2, 7: 3 were determined with a static equilibrium still, and were correlated by using Peng-Robinson model. The average relative error ofpropylene concentration in liquid phase is 1. 46 %. The results indicate that the models are very suitablefor the ternary system and the data are reliable.

Modeling analysis of cobalt-based Fischer-Tropsch catalyst particles

The influences of particle size,shape,and catalyst distribution on the reactivity and hydrocarbon product selectivity of a cobalt-based catalyst for Fischer-Tropsch synthesis were investigated in the present work.A self-consistent kinetic model for Fischer-Tropsch reaction proposed here was found to correlate experimental data well and hence was used to describe the consumption rates of reactants and formation rates of hydrocarbon products.The perturbed-chain statistical associating fluid theory equation of state was used to describe vapor-liquid equilibrium behavior associated with Fischer-Tropsch reaction.Local interaction between intraparticle diffusion and Fischer-Tropsch reaction was investigated in detail.Results showed that in order to avoid the adverse influence of intraparticle diffusional limitations on catalyst reactivity and product selectivity,the use of small particles is necessary.Large eggshell spherical particles are shown to keep the original catalyst reactivity and enhance the selectivity of heavy hydrocarbon products.The suitable layer thickness for a spherical particle with a diameter of 2 mm is nearly 0.15 mm.With the same outer diameter of 2 mm,the catalyst reactivity and heavy product selectivity of hollow cylindrical particles with a layer thickness of 0.25 mm are found to be larger than eggshell spherical particles.From the viewpoint of catalytic performance,hollow cylindrical particles are a better choice for industrial applications.

Vapor-Liquid Equilibrium Data of Carbon Dioxide＋Methyl Propionate and Carbon Dioxide＋Propyl Propionate Systems

High-pressure vapor-liquid equilibrium data for the binary systems of methyl propionate＋carbon dioxide and propyl propionate＋carbon dioxide were measured at pressure from 1.00 MPa to 12.00 MPa and temperature in the range from 313 K to 373 K. Experimental results were correlated with the Peng-Robinson equation of state with the two-parameter van der Waals mixing rule. At the same time, the Henry＇s coefficient, partial molar enthalpy change and partial molar entropy change of CO2 during dissolution at different temperature were also calculated.

Isobaric Vapor-Liquid Equilibrium for Methyldichlorosi-lane+Methylvinyldichlorosilane+Toluene and Constituent Binary Systems

Vapor-liquid equilibrium (VLE) for a ternary system of methyldichlorosilane + methylvinyldichlorosi-lane + toluene and constituent binary systems were measured at 101.3kPa using a new type of magnetical pump-ebulliometer. The equilibrium compositions of the vapor phase of binary systems were calculated indirectly from the total pressure-temperature-liquid composition (pTx). The experimental data were correlated with the Wilson and NRTL(non-random two liquid) equations. The parameters of the Wilson model were employed to predict the ternary VLE data. The calculated boiling points were in good agreement with the experimental ones.

Isobaric Vapor-Liquid Equilibrium of Binary Systems： p-Xylene ＋ （Acetic Acid, Methyl Acetate and n-Propyl Acetate） and Methyl Acetate ＋ n-Propyl Acetate in an Acetic Acid Dehydration Process

The vapor-liquid equilibrium data of four binary systems (acetic acid +p-xylene, methyl acetate +n-propyl acetate, n-propyl acetate +p-xylene and methyl acetate +p-xylene) are measured at 101.33 kPa with Ellis equilibrium still, and then both the NRTL and UNIQUAC models are used in combination with the HOC model for correlating and estimating the vapor-liquid equilibrium of these four binary systems. The estimated binary VLE results using correlated parameters agree well with the measured data except the methyl acetate +p-xylene system which easily causes bumping and liquid rushing out of the sampling tap due to their dramatically different boiling points. The correlation results by NRTL and UNIQUAC models have little difference on the average absolute deviations of temperature and composition of vapor phase, and the results by NRTL model are slightly better than those by UNIQUAC model except for the methyl acetate +n-propyl acetate system, for which the latter gives more accurate correlations.

Vapor-Liquid Equilibrium Prediction of Ammonia-Ionic Liquid Working Pairs of Absorption Cycle Using UNIFAC Model

On the basis of reported experimental vapor-liquid equilibrium （VLE） data of NH3-1-ethyl-3-methylimidazolium acetate （NH3-[Emim]Ac）, NH3-1-butyl-3-methylimidazolium tetrafluoroborate （NH3-[Bmim][BF4]）, NH3-1,3-dimethylimidazolium dimethyl phosphate （NH3-[Mmim]DMP） and NH3-1-ethyl-3-methylimidazolium ethylsulfate （NH3-[Emim]EtOSO3） binary systems, the interaction parameters of 14 new groups have been regressed by means of the UNIFAC model. To validate the reliability of the method, these parameters have been used to calculate the VLE data with the average relative deviation of pressures of less than 9.35%. The infinite dilution activity coefficient （ γ1∞ ） and the absorption potential （ φ1 ） are important evaluation criterions of the affinity between working pair species of the absorption cycle. The UNIFAC model is implemented to predict the values of and φ1 of t6 sets of NH3-ionic liquid （1L） systems. The work found that the φ1 gradually increases following the impact order： φ1（[Cnmim][BF4]）〈φ1（[Cnmim]EtOSO3）〈φ1（[Cnmim]DMP）〈φ1（[Cnmim]Ac） （n= 1, 2, 3, … ） at a given cation of IL species and constant temperature, and φ1（[Mmim]X）〈φ1（[Emim]X）〈φ1（[Pmim]X）〈 φ1（[Bmim]X）（X= Ac, [BF4], DMP or EtOSO3） at a given anion of IL species and constant temperature. Furthermore, the φ1 gradually increases with increasing temperature. Then, it could be concluded that the working pair NH3-[BmimlAc has the best potential research value relatively.

Vapor-Liquid Equilibrium Measurements and Modeling for Ternary System Water ＋ Ethanol ＋ 1-Butyl-3-methylimidazolium Acetate

Vapor-liquid equilibrium(VLE) data were measured for ternary system water + ethanol + 1-butyl-3methylimidazolium acetate([bmim][OAc]),in a relatively wide range of ionic liquid(IL) mass fractions up to 0.8.Six sets of complete T-x-y data were obtained,in which the mole fraction of ethanol on IL-free basis was fixed separately at 0.1,0.2,0.4,0.6,0.8,and approximate 0.98.The non-random-two-liquid(NRTL) and electrolyte non-random-two-liquid(eNRTL) equations were used for correlation,showing similar deviations.The ternary VLE was also modeled with the correlation from two data sets,with the mole fractions of ethanol on IL-free basis being 0.1 and approximate 0.98.The VLE data were also reproduced satisfactorily.With the eNRTL model,the root-mean-square deviation for temperature is 0.79 K and that for vapor-phase mole fraction is 0.0094.The calculations are in good agreement with experimental data.The effect of the IL on the VLE behavior of the volatile components is also illustrated.

Vapor-Liquid Equilibria for Dimethyl Carbonate-n-Butyl Acetate Binary System at 101.325kPa

The vapor-liquid equilibrium (VLE) data for the dimethyl carbonate-n-butyl acetate binary system were measured by an Ellis equilibrated distillator. The experimental data were checked for their thermodynamic consistency through statistical methods. The VLE data was correlated with Wilson and NRTL activity coefficient models and also with the calculation of the vapor phase fugacity coefficient by the modified Peng-Robinson equation of state.

Cold Model Study and Commercial Test on Novel Vapor-Liquid Distributor of Hydroprocessing Reactor

A novel vapor-liquid distributor was developed on the basis of sufficient study on the existing distributors applied in hydroprocessing reactors. The cold model test data showed that the fluid distribution performance of the novel vapor-liquid distributor was evidently better than the traditional one. Com- mercial tests of the new distributor were carded out in the 300 kt/a gas oil hydrotreating reactor at SINOPEC Changling Branch Company, showing that the new vapor-liquid distributor could improve the fluid distribution, promote the hydrotreating efficiency and lead to better performance than the traditional one.

Isobaric Vapor-Liquid Equilibrium of Binary System 2-Cyclohexen-l-one and 1,2-Epoxycyclohexane

Green oxidation of cyclohexene using dioxygen as oxidizing agent is highly desirable because of its environmental compatibility and economic impact. Separation of its oxidation products depends on the reliable vaporliquid equilibrium （VLE） data of relevant components, which are still lacking. The VLE data of binary system 1,2-epoxycyclohexane and 2-cyclohexen-l-one under ambient pressure were obtained using an improved VLE equipment EC-2 still in this work. The results showed that this binary system has no azeotropic point. Furthermore, the experimental VLE data were correlated with the Wilson thermodynamic model and the corresponding binary interaction parameters of the model were obtained. The results showed that the VLE data agreed well with the model and passed the thermodynamic consistency test of Herrington.

VAPOR-LIQUID EQUILIBRIA FOR MIXTURES OF TOLUENE AND POLYSTYRENE WITH DIFFERENT MOLECULAR WEIGHTS

An experimental system for measuring the VLE of polymer solutions based on the staticvapor-pressure method has been established,VLE data for mixtures of toluene and polystyrene withdifferent molecular weight covering a wide range from 2.98×10~3 to 3.84×10~6 were obtained at 35℃.The reduced pressure p/p°versus weight fraction W plot is found to be independent on the molecularweight of the polymer within the experimental error.Calculated activity coefficients are also independenton the molecular weight.However,for the Flory-Huggins interaction parameter x,not only a strongconcentration dependence is observed,but also the molecular weight of the polymer exerts definiteinfluence.Generally,the parameter x slightly increases as the molecular weight of the polymer decreasesespecially when the molecular weight is low.The dependence of the parameter x on the molecularweight can be neglected when the molecular weight of polymer is greater than 1.00×10~4.

Vapor-Liquid Equilibria for Water+Hydrochloric Acid+Magnesium Chloride and Water+Hydrochloric Acid+Calcium Chloride Systems at Atmospheric Pressure

Vapor-liquid equilibria for water+hydrochloric acid+magnesium chloride and water+hydrochloric acid+calcium chloride systems at atmospheric pressure were measured using a Othmer-type equilibrium still. The experimental data are correlated using a modified Meissner’s method. Satisfactory agreements are obtained between the experimental and the calculated results.

VAPOR-LIQUID EQUILIBRIA OF N METHYLPYRROLIDONE(1)-WATER(2) BINARY SYSTEM BY AN EBULLIOMETER

1 INTRODUCTIONVapor-liquid equilibrium（VLE）data are useful for the study of solution properties ofnon-ideal mixtures as well as for the design of the separation equipment.Then-methylpyrrolidone（NMP）is a new-type and excellent solvent which can be used in somechemical engineering separation processes.The NMP sucks up moisture so easily that it isnecessary to study the VLE relations of the NMP-H2O binary system,

Isobaric Vapor-Liquid Equilibrium for Toluene, 3-Methylthiophene and N-formylmorpholine at 101.33 kPa

Isobaric vapor-liquid equilibrium (VLE) data were measured for binary mixtures of toluene+N- formylmorpholine, toluene+3-methylthiophene and 3-methylthiophene+N-formylmorpholine at 101.33 kPa. The VLE data of the binary systems were found to be thermodynamically consistent. The saturated vapor pressure calculated by CSGC-PR equation of the pure component had higher accuracy than that calculated by Antoine equation. The liquid- phase activity coefficients of the binary systems were calculated by the Wilson, NRTL and UNIFAC models, and the binary interaction parameters of the three models were determined by the VLE data. The Wilson model was selected as the most suitable model to predict the VLE data of the ternary system of toluene+3-methylthiophene+N- formylmorpholine. The relative volatility between toluene and 3-methylthiophene was also calculated. Moreover, the effect of N-formylmorpholine as solvent was studied. When the molar ratio of solvent to feed (S/F) was 7, the relative volatility reached 1.904, which is almost twice the relative volatility without solvent. Therefore, N-formylmorpholine can be considered as an effective extracting agent for the separation of the close-boiling mixture of toluene+3- methylthiophene by extractive distillation.

Vacuum residue coking process simulation using molecular-level kinetic model coupled with vapor-liquid phase separation

In this work,a molecular-level kinetic model was built to simulate the vacuum residue(VR)coking process in a semi-batch laboratory-scale reaction kettle.A series of reaction rules for heavy oil coking were summarized and formulated based on the free radical reaction mechanism.Then,a large-scale molecularlevel reaction network was automatically generated by applying the reaction rules on the vacuum residue molecules.In order to accurately describe the physical change of each molecule in the reactor,we coupled the molecular-level kinetic model with a vapor–liquid phase separation model.The vapor–liquid phase separation model adopted the Peng-Robinson equation of state to calculate vapor–liquid equilibrium.A separation efficiency coefficient was introduced to represent the mass transfer during the phase separation.We used six sets of experimental data under various reaction conditions to regress the model parameters.The tuned model showed that there was an excellent agreement between the calculated values and experimental data.Moreover,we investigated the effect of reaction temperature and reaction time on the product yields.After a comprehensive evaluation of the reaction temperature and reaction time,the optimal reaction condition for the vacuum residue coking was also obtained.

Vapor-Liquid Equilibrium of Toluene-Polycyclic Aromatic Hydrocarbon System in Sub- and Supercritical State

The phase behaviors of toluene/polycyclic aromatic hydrocarbon mixture systems were investigated with a continuous-flow type apparatus at 573.2, 598.2, 623.2 and 648.2 K, while the pressure changed from 1 to 5MPa. The pseudo-binary phase behaviors were predicted with the Peng-Robinson equation of state with interaction parameters between toluene and pseudo-components considered. The phase diagrams of the system have been classified following the category of phase boundary diagram models. The extraction selectivity and efficiency of tolu-ene as a solvent was discussed by comparing with that of hexane. The prediction model for selectivity was also suggested.

Prediction of Vapor-Liquid Equilibria of Alcohol-Hydrocarbon Systems by ^1H NMR and Azeotropic Point

With the energy parameters obtained from1H nuclear magnetic resonance(NMR)chemical shifts data by local composition model and coupled with azeotropic point,the low-pressure vapor-liquid equilibrium is satisfactorily predicted for alcohol+hexane,alcohol+cyclohexane,and alcohol+benzene binary systems at different temperatures.The relationship between the spectroscopic information and thermodynamic property is presented.

Experimental Measurements and Correlations Isobaric Vapor-Liquid Equilibria for Water ＋ Acetic Acid ＋ Sec-butyl Acetate at 101.3 kPa

Isobaric vapor-liquid equilibrium(VLE) data for acetic acid + sec-butyl acetate and water+acetic acid + sec-butyl acetate systems were determined at 101.3 kPa using a modified Rose type.The nonideality of the vapor phase caused by the association of the acetic acid was corrected by the chemical theory and Hayden-O'Connell method.Thermodynamic consistency was tested for the binary VLE data.The experimental data were correlated successfully with the Non-Random Two Liquids(NRTL) model.The Root Mean Square Deviation(RMSD) of the ternary system was 0.0038.The saturation vapor pressure of sec-butyl acetate at 329 to 385 K was measured by means of two connected equilibrium cells.The vapor pressures of water and sec-butyl acetate were correlated with the Antoine equation.The binary interaction parameters and the ternary VLE data were obtained from this work.

A Modified Mixing Rule for PSRK Model and Application for the Prediction of Vapor-Liquid Equilibria of Polymer Solutions

To extend the PSRK (predictive Soave-Redlich-Kwong equation of state) model to vapor-liquid equilibria of polymer solutions, a new EOS-gE mixing rule is applied in which the term ∑ xi ln(b/bi) in the PSRK mixing rule for the parameter a, and the combinatorial part in the original universal functional activity coefficient (UNIFAC) model are cancelled. To take into account the free volume contribution to the excess Gibbs energy in polymer solution, a quadratic mixing rule for the cross co-volume bij with an exponent equals to 1/2 is applied[bij1/2= 1/2(bi1/2+bj1/2)]. The literature reported Soave-Redlich-Kwong equation of state (SRK EOS) parameters ofpure polymer are employed. The PSRK model with the modified mixing rule is used to predict the vapor-liquid equilibrium (VLE) of 37 solvent-polymer systems over a large range of temperature and pressure with satisfactory results.