期刊文献+
共找到3篇文章
< 1 >
每页显示 20 50 100
变模温注塑冷热交替循环流体系统设计 被引量:1
1
作者 郭幼丹 程晓农 《工程塑料应用》 CAS CSCD 北大核心 2011年第12期85-88,共4页
通过对冷热交替循环系统冷热介质的流动过程及传热过程的分析,构建冷热介质流动与传热数学模型,提出冷热交替循环系统设计的方法,同时提出通过水流速度变化来控制注塑温度的方法,为高精度、高品质塑料件的生产提供依据。
关键词 变模温 注塑 冷热交替循环 传热过程 最佳水流速度
下载PDF
低渗透油藏CO2变周期气水交替注入气水比理论设计 被引量:3
2
作者 侯刚刚 杨勇 +3 位作者 王伟 蔡国新 刘同敬 侯吉瑞 《科学技术与工程》 北大核心 2020年第17期6857-6864,共8页
基于开发过程中饱和度、渗透率、分流率不断变化的特点,提出变周期水气交替注入(water alternating gas,WAG)气水比理论设计的概念。从油、气、水三相渗流力学原理出发,借助三相相对渗透率表征模型,建立各相饱和度与相对渗透率间的函数... 基于开发过程中饱和度、渗透率、分流率不断变化的特点,提出变周期水气交替注入(water alternating gas,WAG)气水比理论设计的概念。从油、气、水三相渗流力学原理出发,借助三相相对渗透率表征模型,建立各相饱和度与相对渗透率间的函数关系,得到各相饱和度与流度、气水比、流度偏离系数等相关参数的函数关系。流度偏离系数为引入的新参数,用于考察气水两相流动能力偏离水的流动能力幅度。采用枚举法,得到三相饱和度与气水比和流度偏离系数的关系图版,初步确定三相流动范围内气水比和流度偏离系数的取值范围。根据流度偏离系数和气水比关系曲线的特征点与含水饱和度之间的相互关系,最终确定变周期WAG气水比理论取值的合理范围。通过对实际区块气水比理论设计研究表明:合理气水比与含水饱和度是幂指数的函数关系;目标区块气水比的取值范围为0~34,流度偏离系数的取值范围为0~518。在中低含水阶段,建议WAG气水比理论设计数值为2;在中含水阶段,建议WAG气水比理论设计数值为1;在中高含水阶段,建议WAG气水比理论设计数值为0.5。该方法得到的变周期WAG气水比数值与数值模拟方法得到的结论相同,填补了变周期WAG气水比理论设计空白,对于完善变周期WAG其他参数的理论设计具有启发和借鉴作用。 展开更多
关键词 低渗透油藏 变周期水气交替注入(wag) 气水比 流度偏离系数 理论设计
下载PDF
The Application of CO2-EOR in Ultra-Low Permeability Reservoir
3
作者 Bo Chi Min Li Xue Wang Zhaoyong Li Lifang Wu Shuyan Sun Jiankai Wang Yangxin Su Guinan Yang 《Journal of Earth Science and Engineering》 2014年第5期264-270,共7页
CO2 flooding is a process whereby carbon dioxide is injected into an oil reservoir in order to increase output when extracting oil. Since 1952, Wharton obtained the patent concern CO2 flooding, CO2-EOR (CO2 flooding ... CO2 flooding is a process whereby carbon dioxide is injected into an oil reservoir in order to increase output when extracting oil. Since 1952, Wharton obtained the patent concern CO2 flooding, CO2-EOR (CO2 flooding enhance oil recovery) has been one of research hot-spot around the world. According to the statistical data of 2006, there are total of 94 global CO2-EOR projects, including 65 low permeability oilfield projects (79% of the total). Daqing Oilfield is the largest one of China, after more than 50 years of continuous development, oilfield comprehensive water cut has reached over 90%, and the difficulty of oilfield development has been gradually increasing. In recent years, low and ultra-low permeability reservoirs development have played a more and more important role accompany with low permeability reserves in proportion of the total reserves have been increasing year by year. But water-flooding recovery of low permeability reservoir is very low under the influence of reservoir poor properties and heterogeneity. As a kind of greenhouse gas, CO2 flooding can obtain good results for the low permeability reservoir in which the water flooding has proven ineffective. CO2 flooding Pilot Test was conducted under such background since Dec. 2002, over 10 years of practice has proved that CO2 flooding is an effective method to improve the development effect of low permeability reservoir, all experience during the mechanism study and field test should present important references for further larger-scale CO2 flooding projects. 展开更多
关键词 CO2-EOR low-permeability reservoir start-up pressure miscible-pressure MMP (minimum miscible pressure) wagwater alternating gas injection).
下载PDF
上一页 1 下一页 到第
使用帮助 返回顶部