ROBUST STABILIZATING FOR A OLASS OF UNOERTAIN NONLINEAR INTEROONNECTED SYSTEMS USING VARIABLE STRUCTURE CONTROL

The robust stabilizating control problem for a class of uncertain nonlinear large-scale systems is discussed. Based on the theory of both input/output (I/O) linearization and decentralized variable structure control (VSC),two-level and decentralized variable structure control laws for this kind of systems are presented respectively,which achieve asymptotically stabilization despite the uncertainties and disturbances. At last,sirnulation of the disturbed two-pendulum system is given to illustrate the feasibility of proposed technique.

Robust control of spacecraft variable structures during approach for docking

The robust control of spacecraft during approach for docking is studied by first giving the relative motion equations for trajectory and attitude coupling of two spacecraft and then accomplishing the control design of the tracking vehicle using the feedback linearization method and the variable structure theory. Both theoretical analysis and simulation results indicate the robust controller proposed can guarantee non impact docking of two spacecraft even when the object vehicle is subjected to an external interference.

Adaptive Variable Structure Control of MIMO Nonlinear Systems with Time-varying Delays and Unknown Dead-zones

In this paper, adaptive variable structure neural control is presented for a class of uncertain multi-input multi-output （MIMO） nonlinear systems with state time-varying delays and unknown nonlinear dead-zones. The unknown time-varying delay uncer- tainties are compensated for using appropriate Lyapunov-Krasovskii functionals in the design. The approach removes the assumption of linear function outside the deadband without necessarily constructing a dead-zone inverse as an added contribution. By utilizing the integral-type Lyapunov function and introducing an adaptive compensation term for the upper bound of the residual and optimal approximation error as well as the dead-zone disturbance, the closed-loop control system is proved to be semi-globally uniformly ultimately bounded. In addition, a modified adaptive control algorithm is given in order to avoid the high-frequency chattering phenomenon. Simulation results demonstrate the effectiveness of the approach.

Approximation law for discrete-time variable structure control systems

Two approximation laws of sliding mode for discrete-time variable structure control systems are proposed to overcome the limitations of the exponential approximation law and the variable rate approximation law. By applying the proposed approximation laws of sliding mode to discrete-time variable structure control systems, the stability of origin can be guaranteed, and the chattering along the switching surface caused by discrete-time variable structure control can be restrained effectively. In designing of approximation laws, the problem that the system control input is restricted is also considered, which is very important in practical systems. Finally a simulation example shows the effectiveness of the two approximation laws proposed.

Sliding Mode Variable Structure Control for Visual Servoing System

A visual servoing tracking controller is proposed based on the sliding mode control theory in order to achieve strong robustness against parameter variations and external disturbances. A sliding plane with time delay compensation is presented by the pre-estimate of states. To reduce the chattering of the sliding mode controller, a modified exponential reaching law and hyperbolic tangent function are applied to the design of visual controller and robot joint controller. Simulation results show that the visual servoing control scheme is robust and has good tracking performance.

Optimal variable structure control with sliding modes for unstable processes

In this work,a variable structure control(VSC)technique is proposed to achieve satisfactory robustness for unstable processes.Optimal values of unknown parameters of VSC are obtained using Whale optimization algorithm which was recently reported in literature.Stability analysis has been done to verify the suitability of the proposed structure for industrial processes.The proposed control strategy is applied to three different types of unstable processes including non-minimum phase and nonlinear systems.A comparative study ensures that the proposed scheme gives superior performance over the recently reported VSC system.Furthermore,the proposed method gives satisfactory results for a cart inverted pendulum system in the presence of external disturbance and noise.

An Approach to Polynomial NARX/NARMAX Systems Identification in a Closed-loop with Variable Structure Control

Many physical processes have nonlinear behavior which can be well represented by a polynomial NARX or NARMAX model. The identification of such models has been widely explored in literature. The majority of these approaches are for the open-loop identification. However, for reasons such as safety and production restrictions, open-loop identification cannot always be done. In such cases, closed-loop identification is necessary. This paper presents a two-step approach to closed-loop identification of the polynomial NARX/NARMAX systems with variable structure control （VSC）. First, a genetic algorithm （GA） is used to maximize the similarity of VSC signal to white noise by tuning the switching function parameters. Second, the system is simulated again and its parameters are estimated by an algorithm of the least square （LS） family. Finally, simulation examples are given to show the validity of the proposed approach.

ADAPTIVE VARIABLE STRUCTURE CONTROLLERS AND APPLICATION TO ENGINE IDLE SPEED CONTROL SIMULATION

A neural-network-based adaptive variable structure control methodology isproposed for the tracking problem of nonlinear discrete-time input-output systems. The unknowndynamics of the system are approximated via radial basis function neural networks. The control lawis based on sliding modes and simple to implement. The discrete-time adaptive law for tuning theweight of neural networks is presented using the adaptive filtering algorithm with residueupper-bound compensation. The application of the proposed controller to engine idle speed controldesign is discussed. The results indicate the validation and effectiveness of this approach.

Adaptive variable structure control based on backstepping for spacecraft with reaction wheels during attitude maneuver

An adaptive variable structure control method based on backstepping is proposed for the attitude maneuver problem of rigid spacecraft with reaction wheel dynamics in the presence of uncertain inertia matrix and external disturbances. The proposed control approach is a combination of the backstepping and the adaptive variable structure control. The cascaded structure of the attitude maneuver control system with reaction wheel dynamics gives the advantage for applying the backstepping method to construct Lyapunov functions. The robust stability to external disturbances and parametric uncertainty is guaranteed by the adaptive variable structure control. To validate the proposed control algorithm, numerical simulations using the proposed approach are performed for the attitude maneuver mission of rigid spacecraft with a configuration consisting of four reaction wheels for actuator and three magnetorquers for momentum unloading. Simulation results verify the effectiveness of the proposed control algorithm.

Variable structure control with sliding mode prediction for discrete-time nonlinear systems

A new variable structure control algorithm based on sliding mode prediction for a class of discrete-time nonlinear systems is presented. By employing a special model to predict future sliding mode value, and combining feedback correction and receding horizon optimization methods which are extensively applied on predictive control strategy, a discrete-time variable structure control law is constructed. The closed-loop systems are proved to have robustness to uncertainties with unspecified boundaries. Numerical simulation and pendulum experiment results illustrate that the closed-loop systems possess desired performance, such as strong robustness, fast convergence and chattering elimination.

Fault detection and accommodation via neural network and variable structure control

This paper proposes a novel idea that classifies faults into two different kinds： serious faults and small faults, and treats them with different strategies respectively. A kind of artificial neural network （ANN） is proposed for detecting serious faults, and variable structure （VS） model-following control is constructed for accommodating small faults. The proposed framework takes both advantages of qualitative way and quantitative way of fault detection and accommodation. Moreover, the uncertainty case is investigated and the VS controller is modified. Simulation results of a remotely piloted aircraft with control actuator failures illustrate the performance of the developed algorithm.

Compensation for secondary uncertainty in electro-hydraulic servo system by gain adaptive sliding mode variable structure control

Based on consideration of the differential relations between the immeasurable variables and measurable variables in electro-hydraulic servo system,adaptive dynamic recurrent fuzzy neural networks(ADRFNNs) were employed to identify the primary uncertainty and the mathematic model of the system was turned into an equivalent linear model with terms of secondary uncertainty.At the same time,gain adaptive sliding mode variable structure control(GASMVSC) was employed to synthesize the control effort.The results show that the unrealization problem caused by some system's immeasurable state variables in traditional fuzzy neural networks(TFNN) taking all state variables as its inputs is overcome.On the other hand,the identification by the ADRFNNs online with high accuracy and the adaptive function of the correction term's gain in the GASMVSC make the system possess strong robustness and improved steady accuracy,and the chattering phenomenon of the control effort is also suppressed effectively.

A Novel Genetic Algorithm and Its Application in Variable Structure Control of Robot

A novel genetic algorithm (NGA) is proposed, which possesses micro-regulation and renascence operation. The optimized variable searching interval is regulated gradually according to the sub-group of excellent individuals. The NGA is used to optimize the parameters of the variable structure control (VSC), which satisfies the new reaching law and sliding mode. It is used in robot control systems. Simulation results are given.

VARIABLE STRUCTURE CONTROL APPLIED IN ELECTRO-HYDRAULIC SERVO SYSTEM WITH ANN

The variable structure control （VSC） theory is applied to the electro-hydraulic servo system here. The VSC control law is achieved using Lyapunov method and pole placement. To eliminate the chattering phenomena, a saturation function is adopted. The proposed VSC approach is fairly robust to load disturbance and system parameter variation. Since the distortion. including phase lag and amplitude attenuation occurs in the system sinusoid response, the amplitude and phase control （APC） algorithm, based on Adaline neural network and using LMS algorithm, is developed for distortion cancellation. The APC controller is simple and can on-line adjust, thus it gives accurate tracking.

Adaptive variable structure control for large-scale time-delayed systems with unknown nonlinear dead-zone

The problem of adaptive fuzzy control for a class of large-scale, time-delayed systems with unknown nonlinear dead-zone is discussed here. Based on the principle of variable structure control, a design scheme of adaptive, decentralized, variable structure control is proposed. The approach removes the conditions that the dead-zone slopes and boundaries are equal and symmetric, respectively. In addition, it does not require that the assumptions that all parameters of the nonlinear dead-zone model and the lumped uncertainty are known constants. The adaptive compensation terms of the approximation errors axe adopted to minimize the influence of modeling errors and parameter estimation errors. By theoretical analysis, the closed-loop control system is proved to be semiglobally uniformly ultimately bounded, with tracking errors converging to zero. Simulation results demonstrate the effectiveness of the approach.

Design of variable structure controller for uncertain time-delay singular system

To study the approximation theory of real sliding mode and the design of variable structure controller for time-invariant linear uncertain time-delay singular system,the approximation theory of real sliding mode was developed to provide foundation for obtaining sliding mode by equivalent control,and switching functions with integral dynamic compensators and variable structure controllers were designed respectively under two circumstances that the system without uncertain part was stabilized by delay-dependent and delay-independent linear state feedback. The design guarantees the asymptotical stablity of switching manifolds,and the variable structure controllers can force solution trajectory of the system to arrive at the switching manifolds in limited time. A numerical example is given to demonstrate the feasibility and simplicity of the design method.

Design of Model Following Variable Structure Controller for Three-axle Vehicle

An optimal control procedure is developed for the front and rear wheels of a three-axle vehicle moving on a complex typical road based on model following variable structure control strategy. The actual vehicle may be considered as an uncertain system. Cornering stiffness of front and rear wheels and external disturbances are varied in a limited range. The model-following variable structure control method is used to control both front and rear wheels steering operations of the vehicle, so that steering responses of the vehicle follow from those of the reference model. By numerical results obtained from computer simulation, it is demonstrated that the control system model can cope with the effects of parameter perturbations and outside disturbances.

A Novel Sliding Mode Variable Structure Controller Based on a Genetic Algorithm

A novel control method has been proposed by using the genetic algorithm （GA） for nonlinear and complex plants. The proposed control strategy is based on a variable structure control, it overcomes the defects of other adaptive methods such as strong dependence to the system. A GA is used to learn to optimally select integral coefficient C. Simulation results verified the effectiveness of the controller. For position control of Direct Current （DC） motor in practice, this method has good performance and strong robustness, and both dynamic and steady performances were improved.

Binary ABR flow control over ATM networks with uncertainty using discrete-time variable structure controller

A binary available bit rate （ABR） scheme based on discrete-time variable structure control （DVSC） theory is proposed to solve the problem of asynchronous transfer mode （ATM） networks congestion in this paper. A discrete-time system model with uncertainty is introduced to depict the time-varying ATM networks. Based on the system model, an asymptotically stable sliding surface is designed by linear matrix inequality （LMI）. In addition, a novel discrete-time reaching law that can obviously reduce chatter is also put forward. The proposed discrete-time variable structure controller can effectively constrain the oscillation of allowed cell rate （ACR） and the queue length in a router. Moreover, the controller is self-adaptive against the uncertainty in the system. Simulations are done in different scenarios. The results demonstrate that the controller has better stability and robustness than the traditional binary flow controller, so it is good for adequately exerting the simplicity of binary flow control mechanisms.

Remote Control Guidance Law Design Using Variable Structure Control

A method of sliding mode variable structure control for the missile body being a time varying system is presented. A remote control guidance law is designed. The method has strong robustness to target＇ s maneuver. To reduce the chattering phenomena, quasi-sliding mode variable structure control method is used. Simulation results show that the proposed method has small miss distance for any kind of maneuvering targets and requires small control energy.