Dynamics Modeling and Simulation of Autonomous Underwater Vehicles with Appendages

To provide a simulation system platform for designing and debugging a small autonomous underwater vehicle＇s （AUV） motion controller, a six-degree of freedom （6-DOF） dynamic model for AUV controlled by thruster and fins with appendages is examined. Based on the dynamic model, a simulation system for the AUV＇s motion is established. The different kinds of typical motions are simulated to analyze the motion performance and the maneuverability of the AUV. In order to evaluate the influences of appendages on the motion performance of the AUV, simulations of the AUV with and without appendages are performed and compared. The results demonstrate the AUV has good maneuverability with and without appendages.

MODELING AND IMPLEMENTATION OF SPEED GOVERNOR FOR THE HYBRID ELECTRIC VEHICLE ENGINE

A speed control analysis for an in-line gasoline fueled internal combustion （IC） engine is presented for the purpose of alleviation of high frequency oscillations in engine revolutions. A dynamic cylinder-by-cylinder model is proposed, base on slider-crank mechanism, which is extended to develop a digital governor providing a high fidelity estimation of rotary speed oscillation for hybrid vehicle engines. A modified PID controller that P and I gain is placed in feedback path is also described for hybrid electric vehicle （HEV） engine speed regulation, By comparison between measured and estimated signals, it is demonstrated that a good agreement has been achieved and the governor behaves an excellent damping speed ripple.

Vehicle Dynamic State Estimation： State of the Art Schemes and Perspectives

Next-generation vehicle control and future autonomous driving require further advances in vehicle dynamic state estimation. This article provides a concise review, along with the perspectives, of the recent developments in the estimation of vehicle dynamic states. The definitions used in vehicle dynamic state estimation are first introduced, and alternative estimation structures are presented. Then, the sensor configuration schemes used to estimate vehicle velocity, sideslip angle, yaw rate and roll angle are presented. The vehicle models used for vehicle dynamic state estimation are further summarized, and representative estimation approaches are discussed. Future concerns and perspectives for vehicle dynamic state estimation are also discussed.

Effect of the off-road terrains on the ride comfort of construction vehicles

In order to evaluate the impact of off-road terrains on the ride comfort of construction vehicles,a nonlinear dynamic model of the construction vehicles interacting with the terrain deformations is established based on Matlab/Simulink software.The weighted root mean square(RMS)acceleration responses and the power spectral density(PSD)acceleration responses of the driver s seat heave,the pitch and roll angle of the cab in the low-frequency region are chosen as objective functions under different operation conditions of the vehicle.The results show that the impact of off-road terrains on the driver s ride comfort and health is clear under various conditions of deformable terrains and range of vehicle velocities.In particular,the driver s ride comfort is greatly affected by a soil terrain while the comfortable shake of the driver is strongly affected by a sand terrain.In addition,when the vehicle travels on a poor soil terrain in the frequency range below 4 Hz,more resonance peaks of acceleration PSD responses occurred than that on a rigid road of ISO 2631-1 level C.Thus,the driver s health is significantly affected by the deformable terrain in a low-frequency range.

Dynamics analysis of planar armored cable motion in deep-sea ROV system

The armored cable used in a deep-sea remotely operated vehicle(ROV) may undergo large displacement motion when subjected to dynamic actions of ship heave motion and ocean current. A novel geometrically exact finite element model for two-dimensional dynamic analysis of armored cable is presented. This model accounts for the geometric nonlinearities of large displacement of the armored cable, and effects of axial load and bending stiffness. The governing equations are derived by consistent linearization and finite element discretization of the total weak form of the armored cable system, and solved by the Newmark time integration method. To make the solution procedure avoid falling into the local extreme points, a simple adaptive stepping strategy is proposed. The presented model is validated via actual measured data. Results for dynamic configurations, motion and tension of both ends of the armored cable, and resonance-zone are presented for two numerical cases, including the dynamic analysis under the case of only ship heave motion and the case of joint action of ship heave motion and ocean current. The dynamics analysis can provide important reference for the design or product selection of the armored cable in a deep-sea ROV system so as to improve the safety of its marine operation under the sea state of 4 or above.

Collision mitigation and vehicle transportation safety using integrated vehicle dynamics control systems

The aim of this paper is to investigate the effect of vehicle dynamics control systems （VDCS） on both the collision of the vehicle body and the kinematic behaviour of the ve- hicle＇s occupant in case of offset frontal vehicle-to-vehicle collision. A unique 6-degree-of- freedom （6-DOF） vehicle dynamics/crash mathematical model and a simplified lumped mass occupant model are developed. The first model is used to define the vehicle body crash parameters and it integrates a vehicle dynamics model with a vehicle front-end structure model. The second model aims to predict the effect of VDCS on the kinematics of the occupant. It is shown from the numerical simulations that the vehicle dynamics/crash response and occupant behaviour can be captured and analysed quickly and accurately. Yurthermore, it is shown that the VDCS can affect the crash characteristics positively and the occupant behaviour is improved.

Extended model predictive control scheme for smooth path following of autonomous vehicles

This paper presents an extended model predictive control(MPC)scheme for implementing optimal path following of autonomous vehicles,which has multiple constraints and an integrated model of vehicle and road dynamics.Road curvature and inclination factors are used in the construction of the vehicle dynamic model to describe its lateral and roll dynamics accurately.Sideslip,rollover,and vehicle envelopes are used as multiple constraints in the MPC controller formulation.Then,an extended MPC method solved by differential evolution optimization algorithm is proposed to realize optimal smooth path following based on driving path features.Finally,simulation and real experiments are carried out to evaluate the feasibility and the effectiveness of the extended MPC scheme.Results indicate that the proposed method can obtain the smooth transition to follow the optimal drivable path and satisfy the lateral dynamic stability and environmental constraints,which can improve the path following quality for better ride comfort and road availability of autonomous vehicles.