Ice-Induced Vibrational Response of Single-Pile Offshore Wind-Turbine Foundations

Important challenges must be addressed to make wind turbines sustainable renewable energy sources.A typical problem concerns the design of the foundation.If the pile diameter is larger than that of the jacket platform,traditional mechanical models cannot be used.In this study,relying on the seabed soil data of an offshore wind farm,the m-method and the equivalent embedded method are used to address the single-pile wind turbine foundation problem for different pile diameters.An approach to determine the equivalent pile length is also proposed accordingly.The results provide evidence for the effectiveness and reliability of the model based on the equivalent embedded method.

Dynamic Response of Two-Degree-of-Freedom Riserless Drill String for Vortex-Induced Vibration Suppression and Enhancement

The mechanical behavior,dynamic evolution,and flow-field distribution of a two-degree-of-freedom riserless drill string were simulated numerically by using FLUENT fluid simulation software with the user-defined function embedded.The rotation angular velocities before and after the critical rotation angular velocity were used as independent variables,and the reduced velocity range was 3-14.Fluid-structure coupling was realized based on the dynamic overset grid and the SST k-ωturbulence model.Results reveal that the dynamic response of the riserless drill string was considerably affected by rotation and flow velocity,which are coupled with each other.The cross-flow average dimensionless displacement increased with the rotation angular velocity,and rotation considerably enhanced the in-line maximum average dimensionless displacement.However,the cross-flow amplitude caused by vortex-induced vibration was suppressed when the rotation angular velocity reached a certain value.The in-line and cross-flow frequencies were the same,thereby causing the trajectory to deviate from the standard'figure-eight'shape and become a closed circle shape.The vortex did not fall behind the cylinder at low reduced velocity with high-rotation angular velocity,and the structure of the near-wake vortex remained U-shaped.The wake of the cylinder was deflected along the cross-flow direction,thereby leading to vibration asymmetry and resulting in increased vibration instability and disordered vibration trajectories,especially at high-rotation angular velocities.

Random vortex induced vibration response of suspended flexible cable to fluctuating wind

A popular dynamical model for the vortex induced vibration(VIV)of a suspended flexible cable consists of two coupled equations.The first equation is a partial differential equation governing the cable vibration.The second equation is a wake oscillator that models the lift coefficient acting on the cable.The incoming wind acting on the cable is usually assumed as the uniform wind with a constant velocity,which makes the VIV model be a deterministic one.In the real world,however,the wind velocity is randomly fluctuant and makes the VIV of a suspended flexible cable be treated as a random vibration.In the present paper,the deterministic VIV model of a suspended flexible cable is modified to a random one by introducing the fluctuating wind.Using the normal mode approach,the random VIV system is transformed into an infinite-dimensional modal vibration system.Depending on whether a modal frequency is close to the aeolian frequency or not,the corresponding modal vibration is characterized as a resonant vibration or a non-resonant vibration.By applying the stochastic averaging method of quasi Hamiltonian systems,the response of modal vibrations in the case of resonance or non-resonance can be analytically predicted.Then,the random VIV response of the whole cable can be approximately calculated by superimposing the response of the most influential modal vibrations.Some numerical simulation results confirm the obtained analytical results.It is found that the intensity of the resonant modal vibration is much higher than that of the non-resonant modal vibration.Thus,the analytical results of the resonant modal vibration can be used as a rough estimation for the whole response of a cable.

The Effect of Internal Fluid on the Response of Vortex-Induced Vibration of Marine Risers

Based on Iwan′s wake oscillator model developed with the classical van der Pol equation, the differential equation for the response of the vortex-induced vibration (VIV) of the riser considering the effect of the internal flowing fluid and the external marine environmental condition is derived. The effect of the internal flowing fluid on the response of VIV of the riser is studied by means of the Finite Element Method. The results show that the effect of the internal fluid velocity on the VIV of the riser is strong when the natural frequency of the riser is close to the vortex shedding frequency. In addition, the increase of the top tension can decrease the sensitivity of the riser to the internal fluid velocity.

Effect of cross-wind on spatial vibration responses of train and track system

By taking cross-wind forces acting on trains into consideration, a dynamic analysis method of the cross-wind and high-speed train and slab track system was proposed on the basis of the analysis theory of spatial vibration of high-speed train and slab track system. The corresponding computer program was written by FORTRAN language. The dynamic responses of the high-speed train and slab track under cross-wind action were calculated. Meanwhile, the effects of the cross-wind on the dynamic responses of the system were also analyzed. The results show that the cross-wind has a significant influence on the lateral and vertical displacement responses of the car body, load reduction factor and overturning factor. For example, the maximum lateral displacement responses of the car body of the first trailer with and without cross-wind forces are 32.10 and 1.60 mm, respectively. The maximum vertical displacement responses of the car body of the first trailer with and without cross-wind forces are 6.60 and 3.29 mm, respectively. The maximum wheel load reduction factors of the first trailer with and without cross-wind forces are 0.43 and 0.22, respectively. The maximum overturning factors of the first trailer with and without cross-wind forces are 0.28 and 0.08, respectively. The cross-wind affects the derailment factor and lateral Sperling factor of the moving train to a certain extent. However, the lateral and vertical displacement responses of rails with the crnss-wind are almost the same as those without the cross-wind. The method presented and the corresponding computer program can be used to calculate the interaction between trains and track in cross-wind.

Nonlinear Modeling and Identification of Structural Joint by Response Control Vibration Test

Components of mechanical product are assembled by structural joints,such as bolting,riveting,welding,etc.Structural joints introduce nonlinearity to some engineering structures,and the nonlinearity need to be modeled precisely.To meet serious quality requirements,it is necessary to detect and identify nonlinearity of mechanical products for structural optimization.Modal test to acquire a dynamic response has been applied for decades,which provides reliable results for finite element(FE)model updating.Here response control vibration test for identification of nonlinearity is presented.A nonlinear system can be regarded as linearity for particular steady state response,and classical linear analysis tool is applicable to extract modal data for particular response.First,its applicability is illustrated by some numerical simulations.Subsequently,it is implemented on experimental setup with structural joints by shaking table.The stiffness and damping function dependent of relative displacement are fitted to describe its inherent nonlinearity.The spring and damping forces are identified by harmonic balance method(HBM)to predict output response.Based on the identified results,the procedure is recommended that it allows a reliable measurement of nonlinearity with a certain accuracy.

An alternative approach to predict human response to blast induced ground vibration

The aim of this study is to create alternative approaches to predict human response to ground vibration.Site measurements were conducted in an urban quarry.The multiple discriminant analysis technique was used to develop classification models.The measured ground vibration values were grouped based on the limit values appearing in the literature.Two classification models were created to predict human response to ground vibration.In addition,classical predictor equations were developed to compare to the classification models.The best equations were chosen considering several error measures.All the models were tested on the independent data.The prediction accuracy of the discriminant analysis models is quite promising.Nearly eighty-nine percent of the test data were correctly classified.The classification models have a combined structure.The results of the models can be directly presented to the neighbors of the studied quarry.The models are not complex.They do not require additional software or information to practice and can be easily used by site engineers.

STEADY-STATE RESPONSES AND THEIR STABILITY OF NONLINEAR VIBRATION OF AN AXIALLY ACCELERATING STRING

The steady-state transverse vibration of an axially moving string with geometric nonlinearity was investigated. The transport speed was assumed to be a constant mean speed with small harmonic variations. The nonlinear partial-differential equation that governs the transverse vibration of the string was derived by use of the Hamilton principle. The method of multiple scales was applied directly to the equation. The solvability condition of eliminating the secular terms was established. Closed form solutions for the amplitude and the existence conditions of nontrivial steady-state response of the two-to-one parametric resonance were obtained. Some numerical examples showing effects of the mean transport speed, the amplitude and the frequency of speed variation were presented. The Liapunov linearized stability theory was employed to derive the instability conditions of the trivial solution and the nontrivial solutions for the two-to-one parametric resonance. Some numerical examples highlighting influences of the related parameters on the instability conditions were presented.

Vibration response analysis of 2-DOF locally nonlinear systems based on the theory of modal superposition

Many important vibration phenomena which simultaneously contain quadratic nonlinear stiffness and damping exist in the complicated vibrating systems under practical circumstances. In this paper, we established a 2-degree-of-freedom (DOF) nonlinear vibration model for such a system, deduced the differential equations of motion which govern its dynamics, and worked out the solutions for the governing equations by the principle of superposition of nonlinear normal modes (NLNM) based on Shaw’s theory of invariant manifolds. We conducted numerical simulations with the established model, using superposition of nonlinear normal modes and direct numerical methods, respectively. The obtained results demonstrate the feasibility of the proposed method in that its calculated data varies in a similar tendency to that of the direct numerical solutions.

The bending vibration response and approximate calculation of elastic cylindrical shell

Useful structure characteristics of elastic cylindrical shells have led them to being widely applied in virtual projects,so it is important to conduct vibration research on the shells and find it’s a simpler corresponding compact calculation method. Utilising the input and transfer point mobility of a thin plate structure, a theoretical expression of the cylindrical shell’s bending vibration responsewas deduced and numerical simulations were done to simplify the theoretical expression within an acceptable error margin, greatly reducing the amount of computations. Furthermore, whole vibration response distributions of the cylindrical shell were analyzed. It was found thathe vibration energy propagates in helical form under mono-frequency excitation, while under bandwidth frequency excitation, it attenuates around in term of fluctuation.The axial attenuation rate of the vibration energy is larger than the circumferential attenuation rate.

Experimental study of suppressing the unbalanced response vibration of rotor system with a G-type integral squeeze film damper

Conventional squeeze film dampers have numerous challenges including lock up,bistable response and incoordinate precession.In order to resolve these nonlinear problems,a novel G-type integral squeeze film damper(GISFD)is proposed in this research.The experimental test rig is provided to investigate the rotor system with an unbalanced single disk.Numerical simulation results show that the structural design of GISFD is reasonable,which can ensure its safe and stable operation.The influence of different support stiffnesses on the first-order speed of the rotor system is analyzed.Experimental results show that GISFD can effectively suppress the unbalanced response vibration of the rotor.In a certain range,it is found that the suppression effect of GISFD increases with the increase in the kinematic viscosity of the damping fluid.When the silicone oil with kinematic viscosity coefficients v=30.0 cm^(2)/s is employed,the vibration reduction of GISFD is approximately 71.51%.Furthermore,the experimental results show that with the increase of the unbalance,there is a linear relationship between the unbalance and the corresponding amplitude of the unbalanced response.It is concluded that GISFD has excellent linear damping characteristics and reduces the sensitivity of the rotor system to the unbalanced mass.

Parametric characteristic of the random vibration response of nonlinear systems

Volterra series is a powerful mathematical tool for nonlinear system analysis,and there is a wide range of nonlinear engineering systems and structures that can be represented by a Volterra series model.In the present study,the random vibration of nonlinear systems is investigated using Volterra series.Analytical expressions were derived for the calculation of the output power spectral density（PSD） and input-output cross-PSD for nonlinear systems subjected to Gaussian excitation.Based on these expressions,it was revealed that both the output PSD and the input-output crossPSD can be expressed as polynomial functions of the nonlinear characteristic parameters or the input intensity.Numerical studies were carried out to verify the theoretical analysis result and to demonstrate the effectiveness of the derived relationship.The results reached in this study are of significance to the analysis and design of the nonlinear engineering systems and structures which can be represented by a Volterra series model.

DYNAMIC RESPONSE OF SHAPE MEMORY ALLOY SYSTEM AND ITS VIBRATION CONTROL

A hysteric model is represented to describe the dependence of restoring force on deformation of pseudoelastic SMA.The dynamic response of the system is investigated by means of mathematical models.The result shows that this kind of vibration absorbing system can suppress vibration with large amplitude effectively.Furthermore,the vibration absorbing system can work in optimum state by adjusting temperature and using piezoelectric sensors and actuators.

NONLINEAR DYNAMIC RESPONSE AND ACTIVE VIBRATION CONTROL OF THE VISCOELASTIC CABLE WITH SMALL SAG

The problem considered is an initially stressed viscoelastic cable with small sag. The cable material is assumed to be constituted by the hereditary differential type. The partial differential equations of motion is derived first. Then by applying Galerkin's method, the governing equations are reduced to a set of third order nonlinear ordinary differential equations which are solved by Runge-Kutta numerical integration procedures. Only after the transverse vibration of the plane is considered and the nonlinear terms are neglected, can the nonlinear ordinary differential equations be expressed as a continuous state equation in the state space. The matrix of state transition is approximated stepwise by the matrix exponential; in addition, the state equation is discretized to a difference equation to improve the computing efficiency. Furthermore, an optimal control of procedure system based on the minimization of a quadratic performance index for state vector and control forces is developed. Finally, the effect of dynamic response of the cable, which is produced by viscoelastic parameters, is testified by the research of digital simulation.

Vibration reliability analysis for aeroengine compressor blade based on support vector machine response surface method

To ameliorate reliability analysis efficiency for aeroengine components, such as compressor blade, support vector machine response surface method(SRSM) is proposed. SRSM integrates the advantages of support vector machine(SVM) and traditional response surface method(RSM), and utilizes experimental samples to construct a suitable response surface function(RSF) to replace the complicated and abstract finite element model. Moreover, the randomness of material parameters, structural dimension and operating condition are considered during extracting data so that the response surface function is more agreeable to the practical model. The results indicate that based on the same experimental data, SRSM has come closer than RSM reliability to approximating Monte Carlo method(MCM); while SRSM(17.296 s) needs far less running time than MCM(10958 s) and RSM(9840 s). Therefore,under the same simulation conditions, SRSM has the largest analysis efficiency, and can be considered a feasible and valid method to analyze structural reliability.

Dynamic modeling of ultra-precision fly cutting machine tool and the effect of ambient vibration on its tool tip response

The dynamic performances of an ultra-precision fly cutting machine tool(UFCMT)has a dramatic impact on the quality of ultra-precision machining.In this study,the dynamic model of an UFCMT was established based on the transfer matrix method for multibody systems.In particular,the large-span scale flow field mesh model was created;and the variation in linear and angular stiffness of journal and thrust bearings with respect to film thickness was investigated by adopting the dynamic mesh technique.The dynamic model was proven to be valid by comparing the dynamic characteristics of the machine tool obtained by numerical simulation with the experimental results.In addition,the power spectrum density estimation method was adopted to simulate the statistical ambient vibration excitation by processing the ambient vibration signal measured over a long period of time.Applying it to the dynamic model,the dynamic response of the tool tip under ambient vibration was investigated.The results elucidated that the tool tip response was significantly affected by ambient vibration,and the isolation foundation had a good effect on vibration isolation.

Vibration Response and Stress Analysis of Planar Elastic Tube Bundle Induced by Fluid Flow

Flow?induced vibration plays a positive role on heat transfer enhancement. Meanwhile, it is also a negative factor for fatigue strength. Satisfying the fatigue strength is the primary prerequisite for heat transfer enhancement. This paper numerically studied the flow?induced vibration of planar elastic tube bundle based on a two?way fluid–structure interaction(FSI) calculation. The numerical calculation involved the unsteady, three?dimensional incompressible governing equations solved with finite volume approach and the dynamic balance equation of planar elastic tube bundle solved with finite element method combined with dynamic mesh scheme. The numerical approach was verified by comparing with the published experimental results. Then the vibration trajectory, deformation and stress contour of planar elastic tube bundle were all studied. Results show that the combined movement of planar elastic tube bundle represents the agitation from inside to outside. The vibration of out?of?plane is the main vibration form with the typically sinusoidal behavior because the magnitude of displacement along the out?of?plane direction is the 100 times than the value of in?plane direction. The dangerous point locates in the innermost tube where the equivalent stress can be utilized to study the multiaxial fatigue of planar elastic tube bundle due to the alternating stress concentration. In the velocity range of 0.2-3 m/s, it is inferred that the vibration amplitude plays a role on the stress response and the stress amplitude is susceptible to the fluid velocity. This research paves a way for studying the fatigue strength of planar elastic tube bundle by flow?induced vibration.

Numerical simulation of vibrational response characteristics of railway subgrades with insulation boards

This study presents a numerical method based on the surface temperature data and the ground temperature increase in Daqing for predicting temperature field distribution in the Binzhou Railway subgrade and analyzing the temporal and spatial distribution of freeze−thaw status of railway subgrade.The calibrated numerical method is applied to simulate the temperature field distribution and roadbed vibrational response of the railway subgrade with a thermal insulation layer at different seasons.The results show the following:(1)The thermal insulation layer can remarkably increase the soil temperature below it and maximum frost depth in the subgrade.(2)Thermal insulation can effectively reduce the subgrade vibration and protect it from frost damage.(3)Given that the strength requirements are met,the insulation layer should be buried as shallow as possible to effectively reduce the subgrade vibration response.The research findings provide theoretical support for the frost damage prevention of railway subgrades in seasonally frozen regions.

Dynamic Response Analysis of A 5 MW NREL Wind Turbine Blade under Flap-Wise and Edge-Wise Vibrations

A wind turbine is subjected to a regime of varying loads.For example,each rotor revolution causes a complete gravity stress reversal in the low-speed shaft,and there are varying stresses from the out-of-plane loading cycle due to fluctuating wind load.Consequently,wind turbine blade design is governed by fatigue rather than ultimate load considerations.Previous studies have adopted many different beam theories,using different techniques and codes,to model the National Renewable Energy Laboratory(NREL)5MWoffshore wind turbine blade.There are differences,from study to study,in the free vibration results and the dynamic response.The contribution of this study is to apply the code written by the authors to the different beam theories used with the aim of comparing the different beam theories presented in the literature and that developed by the authors.This paper reports the investigation of the effects of deformation parameters on the dynamic characteristics of the NREL 5 MW offshore wind turbine blades predicted by the different beam theories.The investigation of free vibrations is a fundamental step in the analysis of structural dynamics,and this study compares different computational structural methods and investigates their effect on the predicted dynamic response.The modal characteristics of every model examined have been combined with strip theory to determine the dynamic response of the blade.

Nonreciprocity of energy transfer in a nonlinear asymmetric oscillator system with various vibration states

The nonreciprocity of energy transfer is constructed in a nonlinear asymmetric oscillator system that comprises two nonlinear oscillators with different parameters placed between two identical linear oscillators.The slow-flow equation of the system is derived by the complexification-averaging method.The semi-analytical solutions to this equation are obtained by the least squares method,which are compared with the numerical solutions obtained by the Runge-Kutta method.The distribution of the average energy in the system is studied under periodic and chaotic vibration states,and the energy transfer along two opposite directions is compared.The effect of the excitation amplitude on the nonreciprocity of the system producing the periodic responses is analyzed,where a three-stage energy transfer phenomenon is observed.In the first stage,the energy transfer along the two opposite directions is approximately equal,whereas in the second stage,the asymmetric energy transfer is observed.The energy transfer is also asymmetric in the third stage,but the direction is reversed compared with the second stage.Moreover,the excitation amplitude for exciting the bifurcation also shows an asymmetric characteristic.Chaotic vibrations are generated around the resonant frequency,irrespective of which linear oscillator is excited.The excitation threshold of these chaotic vibrations is dependent on the linear oscillator that is being excited.In addition,the difference between the energy transfer in the two opposite directions is used to further analyze the nonreciprocity in the system.The results show that the nonreciprocity significantly depends on the excitation frequency and the excitation amplitude.