This white paper explores three popular development methodologies for network softwarization: DevOps, NetOps, and Verification. The paper compares and contrasts the strengths and weaknesses of each approach and provid...This white paper explores three popular development methodologies for network softwarization: DevOps, NetOps, and Verification. The paper compares and contrasts the strengths and weaknesses of each approach and provides recommendations for organizations looking to adopt network softwarization.展开更多
The mathematical model used to describe the detonation multi-physics phenomenon is usually given by highly coupled nonlinear partial differential equations. Numerical simulation and the computer aided engineering (CAE...The mathematical model used to describe the detonation multi-physics phenomenon is usually given by highly coupled nonlinear partial differential equations. Numerical simulation and the computer aided engineering (CAE) technique has become the third pillar of detonation research, along with theory and experiment, due to the detonation phenomenon is difficult to explain by the theoretical analysis, and the cost required to accredit the reliability of detonation products is very high, even some physical experiments of detonation are impossible. The numerical simulation technique can solve these complex problems in the real situation repeatedly and reduce the design cost and time stunningly. But the reliability of numerical simulation software and the serviceability of the computational result seriously hinders the extension, application and the self-restoration of the simulation software, restricts its independently innovational ability. This article deals with the physical modeling, numerical simulation, and software development of detonation in a unified way. Verification and validation and uncertainty quantification (V&V&UQ) is an important approach in ensuring the credibility of the modeling and simulation of detonation. V&V of detonation is based on our independently developed detonation multiphysics software-LAD2D. We propose the verification method based on mathematical theory and program function as well as availability of its program execution. Validation is executed by comparing with the experiment data. At last, we propose the future prospect of numerical simulation software and the CAE technique, and we also pay attention to the research direction of V&V&UQ.展开更多
IEEE 1012 [1] describes the SDLC phase activities for software independent verification and validation (IV & V) for nuclear power plant in truly general and conceptual manner, which requires the upward and/or down...IEEE 1012 [1] describes the SDLC phase activities for software independent verification and validation (IV & V) for nuclear power plant in truly general and conceptual manner, which requires the upward and/or downward tailoring on its interpretation for practical IV & V. It contains crucial and encompassing check points and guidelines to analyze the design integrity, without addressing the formalized and the specific criteria for IV & V activities confirming the technical integrity. It is necessary to list up the inspection viewpoint via interpretation of the standard that is practical review points checking design consistency. For fruitful IV & V of Control Element Driving Mechanism Control System (CEDMCS) software for Yonggwang Nuclear Power Plant unit 3 & 4, the specific viewpoints and approach are necessary based on the guidelines of IEEE 1012 to enhance the system quality by considering the level of implementation of the theoretical and the practical IV & V. Additionally IV & V guideline of IEEE 1012 does not specifically provide the concrete measure considering the system characteristics of CEDMCS. This paper provides the seven (7) characteristic criteria for CEDMCS IV & V, and by applying these viewpoints, the design analysis such as function, performance, interface and exception, backward and forward requirement traceability analysis has been conducted. The requirement, design, implementation, and test phase were only considered for IV & V in this project. This article also provides the translation of code to map theoretical verification and validation into practical verification and validation. This paper emphasizes the necessity of the intensive design inspection and walkthrough for requirement phase to resolve the design faults because the IV & V of early phase of SDLC obviously contributes to find out most of critical design inconsistency. Especially for test phase IV & V, it is strongly recommended to prepare the test plan document which is going to be the basis for the test coverage selection and test strategy. This test plan document should be based on the critical characteristics of function and performance of CEDMCS. Also to guarantee the independency of V & V organization participating in this project, and to acquire the full package of design details for IV & V, the systematic approach and efforts with an aspect of management is highlighted among the participants.展开更多
As the complexity of autonomous vehicles(AVs)continues to increase and artificial intelligence algorithms are becoming increasingly ubiquitous,a novel safety concern known as the safety of the intended functionality(S...As the complexity of autonomous vehicles(AVs)continues to increase and artificial intelligence algorithms are becoming increasingly ubiquitous,a novel safety concern known as the safety of the intended functionality(SOTIF)has emerged,presenting significant challenges to the widespread deployment of AVs.SOTIF focuses on issues arising from the functional insufficiencies of the AVs’intended functionality or its implementation,apart from conventional safety considerations.From the systems engineering standpoint,this study offers a comprehensive exploration of the SOTIF landscape by reviewing academic research,practical activities,challenges,and perspectives across the development,verification,validation,and operation phases.Academic research encompasses system-level SOTIF studies and algorithm-related SOTIF issues and solutions.Moreover,it encapsulates practical SOTIF activities undertaken by corporations,government entities,and academic institutions spanning international and Chinese contexts,focusing on the overarching methodologies and practices in different phases.Finally,the paper presents future challenges and outlook pertaining to the development,verification,validation,and operation phases,motivating stakeholders to address the remaining obstacles and challenges.展开更多
Tropical cyclones (TCs) and storms (TSs) are among the devastating events in the world and southwestern Indian Ocean (SWIO) in particular. The seasonal forecasting TCs and TSs for December to March (DJFM) and November...Tropical cyclones (TCs) and storms (TSs) are among the devastating events in the world and southwestern Indian Ocean (SWIO) in particular. The seasonal forecasting TCs and TSs for December to March (DJFM) and November to May (NM) over SWIO were conducted. Dynamic parameters including vertical wind shear, mean zonal steering wind and vorticity at 850 mb were derived from NOAA (NCEP-NCAR) reanalysis 1 wind fields. Thermodynamic parameters including monthly and daily mean Sea Surface Temperature (SST), Outgoing Longwave Radiation (OLR) and equatorial Standard Oscillation Index (SOI) were used. Three types of Poison regression models (i.e. dynamic, thermodynamic and combined models) were developed and validated using the Leave One Out Cross Validation (LOOCV). Moreover, 2 × 2 square matrix contingency tables for model verification were used. The results revealed that, the observed and cross validated DJFM and NM TCs and TSs strongly correlated with each other (p ≤ 0.02) for all model types, with correlations (r) ranging from 0.62 - 0.86 for TCs and 0.52 - 0.87 for TSs, indicating great association between these variables. Assessment of the model skill for all model types of DJFM and NM TCs and TSs frequency revealed high skill scores ranging from 38% - 70% for TCs and 26% - 72% for TSs frequency, respectively. Moreover, results indicated that the dynamic and combined models had higher skill scores than the thermodynamic models. The DJFM and NM selected predictors explained the TCs and TSs variability by the range of 0.45 - 0.65 and 0.37 - 0.66, respectively. However, verification analysis revealed that all models were adequate for predicting the seasonal TCs and TSs, with high bias values ranging from 0.85 - 0.94. Conclusively, the study calls for more studies in TCs and TSs frequency and strengths for enhancing the performance of the March to May (MAM) and December to October (OND) seasonal rainfalls in the East African (EA) and Tanzania in particular.展开更多
In silico methods to study biodegradable implants have recently received increasing attention due to their potential in reducing experimental time and cost. An important application case for in silico methods are magn...In silico methods to study biodegradable implants have recently received increasing attention due to their potential in reducing experimental time and cost. An important application case for in silico methods are magnesium(Mg)-based biodegradable implants, as they represent a powerful alternative to traditional materials used for temporary orthopaedic applications. Controlling Mg alloy degradation is critical to designing an implant that supports the bone healing process. To simulate different aspects of this biodegradation process, several mathematical models have been proposed with the ultimate aim of replacing laboratory experiments with computational modeling. In this review, we provide a comprehensive and critical discussion of the published models and their performance with respect to capturing the complexity of the biodegradation process. This complexity is presented initially. Additionally, the present review discusses the different approaches of optimizing and quantifying the different sources of errors and uncertainties within the proposed models.展开更多
Automata theory has played an important role in theoretical computer science since last couple of decades. The alge-braic automaton has emerged with several modern applications, for example, optimization of programs, ...Automata theory has played an important role in theoretical computer science since last couple of decades. The alge-braic automaton has emerged with several modern applications, for example, optimization of programs, design of model checkers, development of theorem provers because of having certain interesting properties and structures from algebraic theory of mathematics. Design of a complex system requires functionality and also needs to model its control behavior. Z notation has proved to be an effective tool for describing state space of a system and then defining operations over it. Consequently, an integration of algebraic automata and Z will be a useful computer tool which can be used for modeling of complex systems. In this paper, we have linked algebraic automata and Z defining a relationship between fundamentals of these approaches which is refinement of our previous work. At first, we have described strongly connected algebraic automata. Then homomorphism and its variants over strongly connected automata are specified. Next, monoid endomorphisms and group automorphisms are formalized. Finally, equivalence of endomorphisms and automorphisms under certain assumptions are described. The specification is analyzed and validated using Z/Eves toolset.展开更多
The present paper investigates the turbulent cavitating flow around the Clark-Y hydrofoil with special emphasis on the influence of cavitation models by verification and validation(V&V)method.RANS solver coupled w...The present paper investigates the turbulent cavitating flow around the Clark-Y hydrofoil with special emphasis on the influence of cavitation models by verification and validation(V&V)method.RANS solver coupled with the three major cavitation models(i.e.,Zwart-Gerber-Belamri,Schnerr and Sauer and full cavitation model,which are abbreviated to ZGB model,SS model and FC model respectively)is employed in this paper.The results indicate that the three cavitation models can properly reproduce the cavitation evolutions.ZGB model and SS model give better prediction in the overall cavitation patterns.FC model exhibits an obvious under-estimation for the sheet cavity,and the predicted volume fraction is closely related to the turbulent flow.The verification and validation procedure is involved to quantitatively assess the accuracy of these three cavitation models.It is indicated that the V&V procedure is suitable for the unsteady cavitating flow.The errors estimate is robust and conservative within the cavitation region,while gets closer to zero in the no-cavitation region.In addition,ZGB model exhibits the highest overall accuracy among the three models,which further verifies its wide applicability.展开更多
文摘This white paper explores three popular development methodologies for network softwarization: DevOps, NetOps, and Verification. The paper compares and contrasts the strengths and weaknesses of each approach and provides recommendations for organizations looking to adopt network softwarization.
基金supported by Science Challenge Project [No TZ2018001]Shandong Provincial Natural Science Foundation [No ZR2017BA014]+1 种基金National Natural Science Foundation of China [No91630312]the Development Program for Defense Ministry of China [No.C1520110002]
文摘The mathematical model used to describe the detonation multi-physics phenomenon is usually given by highly coupled nonlinear partial differential equations. Numerical simulation and the computer aided engineering (CAE) technique has become the third pillar of detonation research, along with theory and experiment, due to the detonation phenomenon is difficult to explain by the theoretical analysis, and the cost required to accredit the reliability of detonation products is very high, even some physical experiments of detonation are impossible. The numerical simulation technique can solve these complex problems in the real situation repeatedly and reduce the design cost and time stunningly. But the reliability of numerical simulation software and the serviceability of the computational result seriously hinders the extension, application and the self-restoration of the simulation software, restricts its independently innovational ability. This article deals with the physical modeling, numerical simulation, and software development of detonation in a unified way. Verification and validation and uncertainty quantification (V&V&UQ) is an important approach in ensuring the credibility of the modeling and simulation of detonation. V&V of detonation is based on our independently developed detonation multiphysics software-LAD2D. We propose the verification method based on mathematical theory and program function as well as availability of its program execution. Validation is executed by comparing with the experiment data. At last, we propose the future prospect of numerical simulation software and the CAE technique, and we also pay attention to the research direction of V&V&UQ.
文摘IEEE 1012 [1] describes the SDLC phase activities for software independent verification and validation (IV & V) for nuclear power plant in truly general and conceptual manner, which requires the upward and/or downward tailoring on its interpretation for practical IV & V. It contains crucial and encompassing check points and guidelines to analyze the design integrity, without addressing the formalized and the specific criteria for IV & V activities confirming the technical integrity. It is necessary to list up the inspection viewpoint via interpretation of the standard that is practical review points checking design consistency. For fruitful IV & V of Control Element Driving Mechanism Control System (CEDMCS) software for Yonggwang Nuclear Power Plant unit 3 & 4, the specific viewpoints and approach are necessary based on the guidelines of IEEE 1012 to enhance the system quality by considering the level of implementation of the theoretical and the practical IV & V. Additionally IV & V guideline of IEEE 1012 does not specifically provide the concrete measure considering the system characteristics of CEDMCS. This paper provides the seven (7) characteristic criteria for CEDMCS IV & V, and by applying these viewpoints, the design analysis such as function, performance, interface and exception, backward and forward requirement traceability analysis has been conducted. The requirement, design, implementation, and test phase were only considered for IV & V in this project. This article also provides the translation of code to map theoretical verification and validation into practical verification and validation. This paper emphasizes the necessity of the intensive design inspection and walkthrough for requirement phase to resolve the design faults because the IV & V of early phase of SDLC obviously contributes to find out most of critical design inconsistency. Especially for test phase IV & V, it is strongly recommended to prepare the test plan document which is going to be the basis for the test coverage selection and test strategy. This test plan document should be based on the critical characteristics of function and performance of CEDMCS. Also to guarantee the independency of V & V organization participating in this project, and to acquire the full package of design details for IV & V, the systematic approach and efforts with an aspect of management is highlighted among the participants.
基金supported by the National Science Foundation of China Project(52072215,U1964203,52242213,and 52221005)National Key Research and Development(R&D)Program of China(2022YFB2503003)State Key Laboratory of Intelligent Green Vehicle and Mobility。
文摘As the complexity of autonomous vehicles(AVs)continues to increase and artificial intelligence algorithms are becoming increasingly ubiquitous,a novel safety concern known as the safety of the intended functionality(SOTIF)has emerged,presenting significant challenges to the widespread deployment of AVs.SOTIF focuses on issues arising from the functional insufficiencies of the AVs’intended functionality or its implementation,apart from conventional safety considerations.From the systems engineering standpoint,this study offers a comprehensive exploration of the SOTIF landscape by reviewing academic research,practical activities,challenges,and perspectives across the development,verification,validation,and operation phases.Academic research encompasses system-level SOTIF studies and algorithm-related SOTIF issues and solutions.Moreover,it encapsulates practical SOTIF activities undertaken by corporations,government entities,and academic institutions spanning international and Chinese contexts,focusing on the overarching methodologies and practices in different phases.Finally,the paper presents future challenges and outlook pertaining to the development,verification,validation,and operation phases,motivating stakeholders to address the remaining obstacles and challenges.
文摘Tropical cyclones (TCs) and storms (TSs) are among the devastating events in the world and southwestern Indian Ocean (SWIO) in particular. The seasonal forecasting TCs and TSs for December to March (DJFM) and November to May (NM) over SWIO were conducted. Dynamic parameters including vertical wind shear, mean zonal steering wind and vorticity at 850 mb were derived from NOAA (NCEP-NCAR) reanalysis 1 wind fields. Thermodynamic parameters including monthly and daily mean Sea Surface Temperature (SST), Outgoing Longwave Radiation (OLR) and equatorial Standard Oscillation Index (SOI) were used. Three types of Poison regression models (i.e. dynamic, thermodynamic and combined models) were developed and validated using the Leave One Out Cross Validation (LOOCV). Moreover, 2 × 2 square matrix contingency tables for model verification were used. The results revealed that, the observed and cross validated DJFM and NM TCs and TSs strongly correlated with each other (p ≤ 0.02) for all model types, with correlations (r) ranging from 0.62 - 0.86 for TCs and 0.52 - 0.87 for TSs, indicating great association between these variables. Assessment of the model skill for all model types of DJFM and NM TCs and TSs frequency revealed high skill scores ranging from 38% - 70% for TCs and 26% - 72% for TSs frequency, respectively. Moreover, results indicated that the dynamic and combined models had higher skill scores than the thermodynamic models. The DJFM and NM selected predictors explained the TCs and TSs variability by the range of 0.45 - 0.65 and 0.37 - 0.66, respectively. However, verification analysis revealed that all models were adequate for predicting the seasonal TCs and TSs, with high bias values ranging from 0.85 - 0.94. Conclusively, the study calls for more studies in TCs and TSs frequency and strengths for enhancing the performance of the March to May (MAM) and December to October (OND) seasonal rainfalls in the East African (EA) and Tanzania in particular.
基金funding from the Helmholtz-Incubator project Uncertainty Quantification。
文摘In silico methods to study biodegradable implants have recently received increasing attention due to their potential in reducing experimental time and cost. An important application case for in silico methods are magnesium(Mg)-based biodegradable implants, as they represent a powerful alternative to traditional materials used for temporary orthopaedic applications. Controlling Mg alloy degradation is critical to designing an implant that supports the bone healing process. To simulate different aspects of this biodegradation process, several mathematical models have been proposed with the ultimate aim of replacing laboratory experiments with computational modeling. In this review, we provide a comprehensive and critical discussion of the published models and their performance with respect to capturing the complexity of the biodegradation process. This complexity is presented initially. Additionally, the present review discusses the different approaches of optimizing and quantifying the different sources of errors and uncertainties within the proposed models.
文摘Automata theory has played an important role in theoretical computer science since last couple of decades. The alge-braic automaton has emerged with several modern applications, for example, optimization of programs, design of model checkers, development of theorem provers because of having certain interesting properties and structures from algebraic theory of mathematics. Design of a complex system requires functionality and also needs to model its control behavior. Z notation has proved to be an effective tool for describing state space of a system and then defining operations over it. Consequently, an integration of algebraic automata and Z will be a useful computer tool which can be used for modeling of complex systems. In this paper, we have linked algebraic automata and Z defining a relationship between fundamentals of these approaches which is refinement of our previous work. At first, we have described strongly connected algebraic automata. Then homomorphism and its variants over strongly connected automata are specified. Next, monoid endomorphisms and group automorphisms are formalized. Finally, equivalence of endomorphisms and automorphisms under certain assumptions are described. The specification is analyzed and validated using Z/Eves toolset.
基金supported by the National Natural Science Foundation of China (Grant No. 52176041).
文摘The present paper investigates the turbulent cavitating flow around the Clark-Y hydrofoil with special emphasis on the influence of cavitation models by verification and validation(V&V)method.RANS solver coupled with the three major cavitation models(i.e.,Zwart-Gerber-Belamri,Schnerr and Sauer and full cavitation model,which are abbreviated to ZGB model,SS model and FC model respectively)is employed in this paper.The results indicate that the three cavitation models can properly reproduce the cavitation evolutions.ZGB model and SS model give better prediction in the overall cavitation patterns.FC model exhibits an obvious under-estimation for the sheet cavity,and the predicted volume fraction is closely related to the turbulent flow.The verification and validation procedure is involved to quantitatively assess the accuracy of these three cavitation models.It is indicated that the V&V procedure is suitable for the unsteady cavitating flow.The errors estimate is robust and conservative within the cavitation region,while gets closer to zero in the no-cavitation region.In addition,ZGB model exhibits the highest overall accuracy among the three models,which further verifies its wide applicability.