A three-dimensional electrical-thermal coupling model based on the finite element method is applied to study thermal properties of implant-defined vertical cavity surface emitting laser （VCSEL） arrays. Several param...A three-dimensional electrical-thermal coupling model based on the finite element method is applied to study thermal properties of implant-defined vertical cavity surface emitting laser （VCSEL） arrays. Several parameters including inter-element spacing, scales, injected current density and substrate temperature are considered. The actual temperatures obtained through experiment are in excellent agreement with the calculated results, which proves the accuracy of the model. Due to the serious thermal problem, it is essential to design arrays of low self-heating. The analysis can provide a foundation for designing VCSEL arrays in the future.展开更多
Based on Biot＇s dynamic consolidation equations, by means of Laplace-Hankel transform technology, the integral solutions of stress and displacement in saturated soil with subjacent rock-stratum under axisymmetric arb...Based on Biot＇s dynamic consolidation equations, by means of Laplace-Hankel transform technology, the integral solutions of stress and displacement in saturated soil with subjacent rock-stratum under axisymmetric arbitrary excitations were derived. Influence of the reflected wave generated by the boundary was revealed. Numerical results indicate that the vibration frequency has some effect on the vertical displacement of satu rated soil. The vertical displacement at the surface of saturated soil lags in phase with the load. Furthermore, the dynamic permeability coefficient of saturated soil has significant effect on the vertical displacement at the initial stage of load applied, but when the load becomes stable, the effect is inapparent.展开更多
Beam steering in implant defined coherently coupled vertical cavity surface emitting laser （VCSEL） arrays is simulated using the FDTD solution software. Angular deflection dependent on relative phase differences amo...Beam steering in implant defined coherently coupled vertical cavity surface emitting laser （VCSEL） arrays is simulated using the FDTD solution software. Angular deflection dependent on relative phase differences among elements, inter-element spacing, element size and emitted wavelength is analyzed detailedly and systematically. We design and fabricate 1×2 implant defined VCSEL arrays for optimum beam steering performance. Electroni- cally controlled beam steering with a maximum deflection angle of 1.6° is successfully achieved in the 1 × 2 VCSEL arrays. The percentage of the power in the central lobe is above 39% when steering. The results show that the steering is controllable. Compared with other beam steering methods, the fabrication process is simple and of low cost.展开更多
During summer Monex-79, a variety of observing systems viz. research ships, research aircrafts, constant pressure balloons and geostationary satellite etc. were deployed, besides the regular conventional observations....During summer Monex-79, a variety of observing systems viz. research ships, research aircrafts, constant pressure balloons and geostationary satellite etc. were deployed, besides the regular conventional observations. The purpose of these additional systems was to make the best possible data for the studies on various aspects of monsoon circulation. The present study is aimed at the construction of vertical wind profile using cloud motion vectors obtained from GOES (I-O) satellite and to examine whether the constructed wind profiles improves the representation of the monsoon system, flow pattern etc. in the objective analysis. For this purpose, climatological normals of the wind field are considered as the initial guess and the objective analyses of the wind field are made with, first using only data from conventional observations over land areas, subsequently including the constructed winds from cloud motion vectors. These analyses are then compared with the standard analyses of wind field obtained from Quick Look Atlas by T. N. Krishnamurti et al. (1979).It is inferred that satellite estimated mean wind profiles show good agreement with the mean wind profiles of the research ships with RMS errors less than 5 mps below 500 hPa and less than 8 mps above 500 hPa. It is further inferred that the inclusion of constructed winds shows a positive impact on the objective analysis and improvement is seen to be more marked in the data-sparse region of the Arabian sea. Analyses which include the constructed winds show better agreement with the standard analysis, than the analyses obtained using only conventional winds. Thus, results of our study suggest that the wind profiles constructed using cloud motion vectors are of potential use in objective analysis to depict the major circulation features over the Indian region.展开更多
The purpose of this paper is to find some better methods for calculating in-line forces on a vertical circular cylinder and for analysing the hydrodynamic coefficients C_D and C_M in wave-current co-existing field. In...The purpose of this paper is to find some better methods for calculating in-line forces on a vertical circular cylinder and for analysing the hydrodynamic coefficients C_D and C_M in wave-current co-existing field. In this pa- per, in order to calculate hydrodynamic forces, the authors try to find a way of applying a great number of the re- sults about C_D and C_M for wave-only field in the case of wave-current co-existing field, and the results about C_D and C_M obtained in regular waves in the ease of irregular waves. Such a way may be of significance in engineering and further research.展开更多
基金Supported by the National Natural Science Foundation of China under Grant Nos 61376049,61076044,61107026,61204011and U1037602the Natural Science Foundation of Beijing under Grant Nos 4132006,4102003,and 4112006+1 种基金the Scientific Research Fund Project of Municipal Education Commission of Beijing under Grant No KM201210005004the Specialized Research Fund for the Doctoral Program of Higher Education under Grant No 20121103110018
文摘A three-dimensional electrical-thermal coupling model based on the finite element method is applied to study thermal properties of implant-defined vertical cavity surface emitting laser （VCSEL） arrays. Several parameters including inter-element spacing, scales, injected current density and substrate temperature are considered. The actual temperatures obtained through experiment are in excellent agreement with the calculated results, which proves the accuracy of the model. Due to the serious thermal problem, it is essential to design arrays of low self-heating. The analysis can provide a foundation for designing VCSEL arrays in the future.
基金Project supported by the National Natural Science Foundation of China(No.50478081)
文摘Based on Biot＇s dynamic consolidation equations, by means of Laplace-Hankel transform technology, the integral solutions of stress and displacement in saturated soil with subjacent rock-stratum under axisymmetric arbitrary excitations were derived. Influence of the reflected wave generated by the boundary was revealed. Numerical results indicate that the vibration frequency has some effect on the vertical displacement of satu rated soil. The vertical displacement at the surface of saturated soil lags in phase with the load. Furthermore, the dynamic permeability coefficient of saturated soil has significant effect on the vertical displacement at the initial stage of load applied, but when the load becomes stable, the effect is inapparent.
基金Supported by the‘Supporting First Action’Joint Foundation for Outstanding Postdoctoral Program under Grant Nos Y7YBSH0001 and Y7BSH14001the National Natural Science Foundation of China under Grant No 61434006the National Key Basic Research Program of China under Grant No 2017YFB0102302
文摘Beam steering in implant defined coherently coupled vertical cavity surface emitting laser （VCSEL） arrays is simulated using the FDTD solution software. Angular deflection dependent on relative phase differences among elements, inter-element spacing, element size and emitted wavelength is analyzed detailedly and systematically. We design and fabricate 1×2 implant defined VCSEL arrays for optimum beam steering performance. Electroni- cally controlled beam steering with a maximum deflection angle of 1.6° is successfully achieved in the 1 × 2 VCSEL arrays. The percentage of the power in the central lobe is above 39% when steering. The results show that the steering is controllable. Compared with other beam steering methods, the fabrication process is simple and of low cost.
文摘During summer Monex-79, a variety of observing systems viz. research ships, research aircrafts, constant pressure balloons and geostationary satellite etc. were deployed, besides the regular conventional observations. The purpose of these additional systems was to make the best possible data for the studies on various aspects of monsoon circulation. The present study is aimed at the construction of vertical wind profile using cloud motion vectors obtained from GOES (I-O) satellite and to examine whether the constructed wind profiles improves the representation of the monsoon system, flow pattern etc. in the objective analysis. For this purpose, climatological normals of the wind field are considered as the initial guess and the objective analyses of the wind field are made with, first using only data from conventional observations over land areas, subsequently including the constructed winds from cloud motion vectors. These analyses are then compared with the standard analyses of wind field obtained from Quick Look Atlas by T. N. Krishnamurti et al. (1979).It is inferred that satellite estimated mean wind profiles show good agreement with the mean wind profiles of the research ships with RMS errors less than 5 mps below 500 hPa and less than 8 mps above 500 hPa. It is further inferred that the inclusion of constructed winds shows a positive impact on the objective analysis and improvement is seen to be more marked in the data-sparse region of the Arabian sea. Analyses which include the constructed winds show better agreement with the standard analysis, than the analyses obtained using only conventional winds. Thus, results of our study suggest that the wind profiles constructed using cloud motion vectors are of potential use in objective analysis to depict the major circulation features over the Indian region.
文摘The purpose of this paper is to find some better methods for calculating in-line forces on a vertical circular cylinder and for analysing the hydrodynamic coefficients C_D and C_M in wave-current co-existing field. In this pa- per, in order to calculate hydrodynamic forces, the authors try to find a way of applying a great number of the re- sults about C_D and C_M for wave-only field in the case of wave-current co-existing field, and the results about C_D and C_M obtained in regular waves in the ease of irregular waves. Such a way may be of significance in engineering and further research.
