The load transfer analytical method is applied to study the bearing mechanism of piles with vertical load in this paper. According to the different hardening rules of soil or rock around the pile shaft, such as work-s...The load transfer analytical method is applied to study the bearing mechanism of piles with vertical load in this paper. According to the different hardening rules of soil or rock around the pile shaft, such as work-softening, ideal elasto-plastic and work-hardening, a universal tri-linear load transfer model is suggested for the development of side and tip resistance by various types of soil (rock) with the consideration of sediment at the bottom of the pile. Based on the model, a formula is derived for the relationship between the settlement and load on the pile top to determine the vertical bearing capacity, taking into account such factors as the characteristics of the stratum, the side resistance along the shaft, and tip resistance under the pile tip. A close agreement of the calculated results with the measured data from a field test pile lends confidence to the future application of the present approach in engineering practice.展开更多
In order to analyze the influence of wave scouring on the vertical bearing behavior of the pile foundation, the finite element software ABAQUS was used to simulate the force of the pile foundation under the action of ...In order to analyze the influence of wave scouring on the vertical bearing behavior of the pile foundation, the finite element software ABAQUS was used to simulate the force of the pile foundation under the action of wave scouring. A three-dimensional finite element calculation model of the pile foundation was established according to the actual working conditions, and the calculation results were compared with the field test results to verify the correctness of the built model. Then, the influence of wave scouring depth and pile embedding depth on the vertical bearing behavior of pile foundation was analyzed through calculation examples. The analysis results showed that the greater the depth of wave erosion, the greater the impact on the vertical bearing behavior of the pile foundation. Meanwhile, the smaller the buried depth of the pile body, the greater the impact on the vertical bearing capacity of the pile. Thus, the reduction rate of the vertical bearing capacity under different scouring depths was obtained.展开更多
By studying the pile-formula and stress-wave methods (e.g., CASE method), the authors propose a new method for testing piles using the single-impact energy and P-S curves. The vibration and wave figures are recorded,...By studying the pile-formula and stress-wave methods (e.g., CASE method), the authors propose a new method for testing piles using the single-impact energy and P-S curves. The vibration and wave figures are recorded, and the dynamic and static displacements are measured by different transducers near the top of piles when the pile is im- pacted by a heavy hammer or micro-rocket. By observing the transformation coefficient of driving energy (total energy), the consumed energy of wave motion and vibration and so on, the vertical bearing capacity for single pile is measured and calculated. Then, using the vibration wave diagram, the dynamic relation curves between the force (P) and the displacement (S) is calculated and the yield points are determined. Using the static-loading test, the dynamic results are checked and the relative constants of dynamic-static P-S curves are determined. Then the sub- sidence quantity corresponding to the bearing capacity is determined. Moreover, the shaped quality of the pile body can be judged from the formation of P-S curves.展开更多
人工神经网络已应用在岩土工程的各个方面。针对常用的 BP 网络的不足之处,建立了基于自适应神经模糊推理系统(ANFIS)的单桩竖向极限承载力预测模型。利用文献中桩的载荷试验数据来训练 ANFIS 网络,确定了网络参数。研究结果表明。同常...人工神经网络已应用在岩土工程的各个方面。针对常用的 BP 网络的不足之处,建立了基于自适应神经模糊推理系统(ANFIS)的单桩竖向极限承载力预测模型。利用文献中桩的载荷试验数据来训练 ANFIS 网络,确定了网络参数。研究结果表明。同常用的 BP 网络相比,ANFIS 预测模型具有学习速度快。拟合能力较好,训练结果唯一等优点,该方法是一种有效地预测单桩极限承载力的方法。展开更多
文摘The load transfer analytical method is applied to study the bearing mechanism of piles with vertical load in this paper. According to the different hardening rules of soil or rock around the pile shaft, such as work-softening, ideal elasto-plastic and work-hardening, a universal tri-linear load transfer model is suggested for the development of side and tip resistance by various types of soil (rock) with the consideration of sediment at the bottom of the pile. Based on the model, a formula is derived for the relationship between the settlement and load on the pile top to determine the vertical bearing capacity, taking into account such factors as the characteristics of the stratum, the side resistance along the shaft, and tip resistance under the pile tip. A close agreement of the calculated results with the measured data from a field test pile lends confidence to the future application of the present approach in engineering practice.
文摘In order to analyze the influence of wave scouring on the vertical bearing behavior of the pile foundation, the finite element software ABAQUS was used to simulate the force of the pile foundation under the action of wave scouring. A three-dimensional finite element calculation model of the pile foundation was established according to the actual working conditions, and the calculation results were compared with the field test results to verify the correctness of the built model. Then, the influence of wave scouring depth and pile embedding depth on the vertical bearing behavior of pile foundation was analyzed through calculation examples. The analysis results showed that the greater the depth of wave erosion, the greater the impact on the vertical bearing behavior of the pile foundation. Meanwhile, the smaller the buried depth of the pile body, the greater the impact on the vertical bearing capacity of the pile. Thus, the reduction rate of the vertical bearing capacity under different scouring depths was obtained.
基金Key Projects of Tenth Five-year Plan of Yunnan Province (54-02-02).
文摘By studying the pile-formula and stress-wave methods (e.g., CASE method), the authors propose a new method for testing piles using the single-impact energy and P-S curves. The vibration and wave figures are recorded, and the dynamic and static displacements are measured by different transducers near the top of piles when the pile is im- pacted by a heavy hammer or micro-rocket. By observing the transformation coefficient of driving energy (total energy), the consumed energy of wave motion and vibration and so on, the vertical bearing capacity for single pile is measured and calculated. Then, using the vibration wave diagram, the dynamic relation curves between the force (P) and the displacement (S) is calculated and the yield points are determined. Using the static-loading test, the dynamic results are checked and the relative constants of dynamic-static P-S curves are determined. Then the sub- sidence quantity corresponding to the bearing capacity is determined. Moreover, the shaped quality of the pile body can be judged from the formation of P-S curves.
文摘人工神经网络已应用在岩土工程的各个方面。针对常用的 BP 网络的不足之处,建立了基于自适应神经模糊推理系统(ANFIS)的单桩竖向极限承载力预测模型。利用文献中桩的载荷试验数据来训练 ANFIS 网络,确定了网络参数。研究结果表明。同常用的 BP 网络相比,ANFIS 预测模型具有学习速度快。拟合能力较好,训练结果唯一等优点,该方法是一种有效地预测单桩极限承载力的方法。
