Making use of the method of obtaining regional vertical strain rate from regional preciseleveling data and gaining dynamic pattern combining with deformation data on spanningfaults, the regional vertical strain dynami...Making use of the method of obtaining regional vertical strain rate from regional preciseleveling data and gaining dynamic pattern combining with deformation data on spanningfaults, the regional vertical strain dynamic evolution characteristics of several moderatelystrong earthquakes such as Lijiang (M_s 7.0) and Menyuan (M_s 6.4) earthquakes occurredin crustal deformation monitoring areas located in the western Yunnan and Qilianshan-Hexiregion. Based on the above-mentioned facts, by studying the time-space nonhomogeneity andstrain energy accumulation status, some criteria for judging the medium. and short-termstrong seismic risk regions according to the regional vertical strain rate dynamic informationare proposed.展开更多
A low-threshold and high-power oxide-confined 850-nm AlInGaAs strained quantum-well （QW） vertical-cavity surface-emitting laser （VCSEL） based on an intra-cavity contacted structure is fabricated. A threshold curre...A low-threshold and high-power oxide-confined 850-nm AlInGaAs strained quantum-well （QW） vertical-cavity surface-emitting laser （VCSEL） based on an intra-cavity contacted structure is fabricated. A threshold current of 1.5 mA for a 22 μm oxide aperture device is achieved, which corresponds to a threshold current density of 0.395 kA/cm2. The peak output optical power reaches 17.5 mW at an injection current of 30 mA at room temperature under pulsed opera- tion. While under continuous-wave （CW） operation, the maximum power attains 10.5 mW. Such a device demonstrates a high characteristic temperature of 327 K within a temperature range from -12°C to 96 °C and good reliability under a lifetime test. There is almost no decrease of the optical power when the device operates at a current of 5 mA at room temperature under the CW injection current.展开更多
Based on the orthotropic elastic theory of rock masses, the X-ray method was used to measure the distribution of macro-residual strain energy density along a depth profile,using core samples taken from 47 large-apertu...Based on the orthotropic elastic theory of rock masses, the X-ray method was used to measure the distribution of macro-residual strain energy density along a depth profile,using core samples taken from 47 large-aperture deep boreholes in four regions of Southwest China： the Longmenshan, Anninghe, Honghe, and Xianshuihe fault zones.Then, the vertical gradients of the macro-residual strain energy density and the macroresidual strain energy contained in high-energy cuboid block segments along each fault zone were determined. The results demonstrate that the macro-residual strain energy stored at shallow levels in the rock mass in these fault zones may be partly responsible for generating many large earthquakes and may explain why the large earthquakes in this region are typically shallow.展开更多
基金This research was sponsored by the National Key Basic Research Project (G1998040703) and China Seismological Burear (95-04-04-01-01).
文摘Making use of the method of obtaining regional vertical strain rate from regional preciseleveling data and gaining dynamic pattern combining with deformation data on spanningfaults, the regional vertical strain dynamic evolution characteristics of several moderatelystrong earthquakes such as Lijiang (M_s 7.0) and Menyuan (M_s 6.4) earthquakes occurredin crustal deformation monitoring areas located in the western Yunnan and Qilianshan-Hexiregion. Based on the above-mentioned facts, by studying the time-space nonhomogeneity andstrain energy accumulation status, some criteria for judging the medium. and short-termstrong seismic risk regions according to the regional vertical strain rate dynamic informationare proposed.
基金Project supported by the National Natural Science Foundation of China (Grant Nos.60908012 and 61076148)the Foundation of Beijing Municipal Education Commission,China (Grant No.KM201010005030)
文摘A low-threshold and high-power oxide-confined 850-nm AlInGaAs strained quantum-well （QW） vertical-cavity surface-emitting laser （VCSEL） based on an intra-cavity contacted structure is fabricated. A threshold current of 1.5 mA for a 22 μm oxide aperture device is achieved, which corresponds to a threshold current density of 0.395 kA/cm2. The peak output optical power reaches 17.5 mW at an injection current of 30 mA at room temperature under pulsed opera- tion. While under continuous-wave （CW） operation, the maximum power attains 10.5 mW. Such a device demonstrates a high characteristic temperature of 327 K within a temperature range from -12°C to 96 °C and good reliability under a lifetime test. There is almost no decrease of the optical power when the device operates at a current of 5 mA at room temperature under the CW injection current.
基金supported by the Joint Seismology Science Foundation(85012,850708,863017,88138,91046)Old Professor Science Foundation(201041)
文摘Based on the orthotropic elastic theory of rock masses, the X-ray method was used to measure the distribution of macro-residual strain energy density along a depth profile,using core samples taken from 47 large-aperture deep boreholes in four regions of Southwest China： the Longmenshan, Anninghe, Honghe, and Xianshuihe fault zones.Then, the vertical gradients of the macro-residual strain energy density and the macroresidual strain energy contained in high-energy cuboid block segments along each fault zone were determined. The results demonstrate that the macro-residual strain energy stored at shallow levels in the rock mass in these fault zones may be partly responsible for generating many large earthquakes and may explain why the large earthquakes in this region are typically shallow.
