Elasto-plastic finite element method is used for the welding residual stress calculation in butt welded joint of carbon steel and stainless steel, fluctuating pressure on the ship hull induced by a propeller is calcul...Elasto-plastic finite element method is used for the welding residual stress calculation in butt welded joint of carbon steel and stainless steel, fluctuating pressure on the ship hull induced by a propeller is calculated from the actual measurement data. As the result of the superposition of vibration load and welding residual stress, the stress amplitude is reduced slightly in high stress area near the welding line, while the value of stress reduction becomes larger when the welding current increases. On the contrary, the stress amplitude is increased clearly far from the welding line. The welding residual stress obviously reduced the fatigue life of ship structure with the vibration load. The fatigue lives of ship structures under vibration are - 1.75 × 105 （ 110 000 ton product carrier） and - 2.43 × 105 （52 000 ton all-purpose cargo ship） without welding residual stress, while the residual stress exists, the fatigue life is down to - 3 × 104.展开更多
A finite element model is developed for the simulation of vibration stress relief （VSR） after welding. For the nonresonant vibration, the reduction in stress strongly depends on the amplitude of vibration. For the r...A finite element model is developed for the simulation of vibration stress relief （VSR） after welding. For the nonresonant vibration, the reduction in stress strongly depends on the amplitude of vibration. For the resonant vibration, the vibration frequency is the key for stress relief. The vibration frequency should be close to the structure natural frequency for the desired vibration mode. Only small vibration amplitude is required, which will be amplified during vibration. Vibration time does not have a major impact on vibration stress relief. When the amplitude of vibration stress relief is large, the treatment will be more effective.展开更多
The transverse free vibration of nanobeams subjected to an initial axial tension based on nonlocal stress theory is presented. It considers the effects of nonlocal stress field on the natural frequencies and vibration...The transverse free vibration of nanobeams subjected to an initial axial tension based on nonlocal stress theory is presented. It considers the effects of nonlocal stress field on the natural frequencies and vibration modes. The effects of a small scale parameter at molecular level unavailable in classical macro-beams are investigated for three different types of boundary conditions:simple supports,clamped supports and elastically-constrained supports. Analytical solutions for transverse deforma-tion and vibration modes are derived. Through numerical examples,effects of the dimensionless nanoscale parameter and pre-tension on natural frequencies are presented and discussed.展开更多
The integration of ultrasonic vibration into sheet forming process can significantly reduce the forming force and bring benefits including the enhancement of surface quality,the enhancement of formability and the redu...The integration of ultrasonic vibration into sheet forming process can significantly reduce the forming force and bring benefits including the enhancement of surface quality,the enhancement of formability and the reduction of spring-back.However,the influencing mechanisms of the high-frequency vibration on parts properties during the incremental sheet forming(ISF)process are not well known,preventing a more efficient forming system.This paper comprehensively investigates the effects of different process parameters(vibration amplitude,step-down size,rotation speed and forming angle)on the micro-hardness,minimum thickness,forming limit and residual stress of the formed parts.First,a series of truncated pyramids were formed with an experimental platform designed for the ultrasonic-assisted incremental sheet forming.Then,microhardness tests,minimum thickness measurements and residual stress tests were performed for the formed parts.The results showed that the surface micro-hardness of the formed part was reduced since the vibration stress induced by the ultrasonic vibration within the material which eliminated the original internal stress.The superimposed University,Beijing 100083,People’s Republic of China ultrasonic vibration can effectively uniform the residual stress and thickness distribution,arid improve the forming limit in the case of the small deformation rate.In addition,through the tensile fracture analysis of the formed part,it is shown that the elongation of material is improved and the elastic modulus and hardening index are decreased.The findings of the present work lay the foundation for a better integration of the ultrasonic vibration system into the incremental sheet forming process.展开更多
文摘Elasto-plastic finite element method is used for the welding residual stress calculation in butt welded joint of carbon steel and stainless steel, fluctuating pressure on the ship hull induced by a propeller is calculated from the actual measurement data. As the result of the superposition of vibration load and welding residual stress, the stress amplitude is reduced slightly in high stress area near the welding line, while the value of stress reduction becomes larger when the welding current increases. On the contrary, the stress amplitude is increased clearly far from the welding line. The welding residual stress obviously reduced the fatigue life of ship structure with the vibration load. The fatigue lives of ship structures under vibration are - 1.75 × 105 （ 110 000 ton product carrier） and - 2.43 × 105 （52 000 ton all-purpose cargo ship） without welding residual stress, while the residual stress exists, the fatigue life is down to - 3 × 104.
基金the National Defence Basic Research and Development Programme of China(No.59975008).
文摘A finite element model is developed for the simulation of vibration stress relief （VSR） after welding. For the nonresonant vibration, the reduction in stress strongly depends on the amplitude of vibration. For the resonant vibration, the vibration frequency is the key for stress relief. The vibration frequency should be close to the structure natural frequency for the desired vibration mode. Only small vibration amplitude is required, which will be amplified during vibration. Vibration time does not have a major impact on vibration stress relief. When the amplitude of vibration stress relief is large, the treatment will be more effective.
基金supported by the Collaboration Scheme from University of Science and Technology of China and City University of Hong Kong Joint Advanced Research Institute, and City University of Hong Kong (No. 7002357 (BC))
文摘The transverse free vibration of nanobeams subjected to an initial axial tension based on nonlocal stress theory is presented. It considers the effects of nonlocal stress field on the natural frequencies and vibration modes. The effects of a small scale parameter at molecular level unavailable in classical macro-beams are investigated for three different types of boundary conditions:simple supports,clamped supports and elastically-constrained supports. Analytical solutions for transverse deforma-tion and vibration modes are derived. Through numerical examples,effects of the dimensionless nanoscale parameter and pre-tension on natural frequencies are presented and discussed.
基金supported by the National Natural Science Foundation of China(Grant Nos.51975328,51605258)the Postdoctoral Innovation Project of Shandong Province(Grant No.201701011)Young Scholars Program of Shandong University(Grant No.2018WLJH55).
文摘The integration of ultrasonic vibration into sheet forming process can significantly reduce the forming force and bring benefits including the enhancement of surface quality,the enhancement of formability and the reduction of spring-back.However,the influencing mechanisms of the high-frequency vibration on parts properties during the incremental sheet forming(ISF)process are not well known,preventing a more efficient forming system.This paper comprehensively investigates the effects of different process parameters(vibration amplitude,step-down size,rotation speed and forming angle)on the micro-hardness,minimum thickness,forming limit and residual stress of the formed parts.First,a series of truncated pyramids were formed with an experimental platform designed for the ultrasonic-assisted incremental sheet forming.Then,microhardness tests,minimum thickness measurements and residual stress tests were performed for the formed parts.The results showed that the surface micro-hardness of the formed part was reduced since the vibration stress induced by the ultrasonic vibration within the material which eliminated the original internal stress.The superimposed University,Beijing 100083,People’s Republic of China ultrasonic vibration can effectively uniform the residual stress and thickness distribution,arid improve the forming limit in the case of the small deformation rate.In addition,through the tensile fracture analysis of the formed part,it is shown that the elongation of material is improved and the elastic modulus and hardening index are decreased.The findings of the present work lay the foundation for a better integration of the ultrasonic vibration system into the incremental sheet forming process.
