A new concept called intelligent virtual control (IVC), which can be drivenby measuring functions, is put forward. This small 'intelligent measurement instrument unit (IMIU)',carrying with functions of instrum...A new concept called intelligent virtual control (IVC), which can be drivenby measuring functions, is put forward. This small 'intelligent measurement instrument unit (IMIU)',carrying with functions of instrument, consists of different types of intelligent virtualinstrument (IVI) through individual components together as building blocks and can be displayeddirectly on the computer screen. This is a new concept of measuring instrument, and also animportant breakthrough after virtual instrument (VI). Virtual control makes instrument resourcesobtain further exploitation. It brings about a fundamental change to the design and manufacturingmode. The instrument therefore, can not only be produced directly inside a PC, but the product isinvolved in the 'green product' system. So far, all the present digital instruments will grow to bereplaced by intelligent control with green characteristics.展开更多
Based on the recently quick-developing time-frequency analysis (TFA)technique and virtual instrument (VI) technique, a virtual instrument in characteristic analysis ofrotating machinery is researched and developed suc...Based on the recently quick-developing time-frequency analysis (TFA)technique and virtual instrument (VI) technique, a virtual instrument in characteristic analysis ofrotating machinery is researched and developed successfully. By utilizing instantaneous frequencyestimation (IFE) theoretics of TFA technique, and based on IFE of peak searching on thetime-frequency spectrum, order analysis (OA) functions is put forward and implemented, such as orderspectrum, order spectrum matrix, order tracking, order tracking filtering, and order componentextraction, etc. Unlike the home and abroad existing popular characteristic analyzers, which needkey phasing devices such as shaft encoder, phase-locked loop (PLL), phase-locked multiple frequency,tachometer, etc, to implement constant angle sampling directly or indirectly, whereas thisinstrument only uses the vibration signal of rotating machinery to carry out OA. This instrumentmakes up the shortage of these traditional instruments in analyzing the non-stationary signal ofrun-up and run-down process of rotating machinery. Therefore, it is a great breakthrough for theexisting order analyzers.展开更多
After analyzing and comparing the traditional automobile instrument,the onboard instrument based on virtual instrument technology is designed in this paper.The PC/104 computer was employed as the core processing unit ...After analyzing and comparing the traditional automobile instrument,the onboard instrument based on virtual instrument technology is designed in this paper.The PC/104 computer was employed as the core processing unit of the onbaard in- strument,and the several intelligent data acquisition nodes are set and connected by the CAN bus,through which the nodes can com- municate with the core processing unit.The information of the vehicle’s working condition can be displayed synthetically by adopt- ing virtual instrument technology.When the working condition goes beyond its limit,the system can emit an alarm,record and storage the abnormal condition automatically,and suggest how to deal with the abnormity urgently.The development background and design idea of onboard information system were elaborated in the paper.The software,the hardware architecture and the principle of onboard information system were introduced in detail.展开更多
A novel three-dimensional（3D） imaging lidar system which is based on a virtual instrument technique is introduced in this paper. The main characteristics of the system include： the capability of modeling a 3D objec...A novel three-dimensional（3D） imaging lidar system which is based on a virtual instrument technique is introduced in this paper. The main characteristics of the system include： the capability of modeling a 3D object in accordance with the actual one by connecting to a geographic information system（GIS）, and building the scene for the lidar experiment including the simulation environment. The simulation environment consists of four parts： laser pulse, atmospheric transport,target interaction, and receiving unit. Besides, the system provides an interface for the on-site experiment. In order to process the full waveform, we adopt the combination of pulse accumulation and wavelet denoising for signal enhancement.We also propose an optimized algorithm for data decomposition： the V-L decomposition method, which combines Vondrak smoothing and laser-template based fitting. Compared with conventional Gaussian decomposition, the new method brings an improvement in both precision and resolution of data decomposition. After applying V-L decomposition to the lidar system, we present the 3D reconstructed model to demonstrate the decomposition method.展开更多
Through investigating intelligent diagnosis method of Computational Intelligence (CI) and studying its application in fault feature extraction, a gear fault detection and Virtual Instrument Diagnostic System is develo...Through investigating intelligent diagnosis method of Computational Intelligence (CI) and studying its application in fault feature extraction, a gear fault detection and Virtual Instrument Diagnostic System is developed by using the two hybrid programming method which combines both advantages of VC++ and MATLAB. The interface is designed by VC++ and the calculation of test data, signal processing and graphical display are completed by MATLAB. The pro-gram converted from M-file to VC++ is completed by interface software, and a various multi-functional gear fault di-agnosis software system is successfully obtained. The software system, which has many functions including the intro-duction of gear vibration signals, signal processing, graphical display, fault detection and diagnosis, monitoring and so on, especially, the ability of diagnosing gear faults. The method has an important application in the field of mechanical fault diagnosis.展开更多
A virtual instrument(Ⅵ) was developed to monitor the technological parameters in the process of brush plating, including coating thickness, brush-plating current, current density, deposition rate, and brush plating v...A virtual instrument(Ⅵ) was developed to monitor the technological parameters in the process of brush plating, including coating thickness, brush-plating current, current density, deposition rate, and brush plating voltage. Meanwhile two approaches were presented to improve the measurement accuracy of coating thickness. One of them aims at eliminating the random interferences by moving average filtering; while the other manages to calculate the quantity of electricity consumed accurately with rectangular integration. With these two approaches, the coating thickness can be measured in real time with higher accuracy than the voltage-frequency conversion method. During the process of plating all the technological parameters are displayed visually on the front panel of the Ⅵ. Once brush current or current density overruns the limited values, or when the coating thickness reaches the objective value, the virtual will alarm. With this Ⅵ, the solution consumption can be decreased and the operating efficiency is improved.展开更多
In order to achieve the auto-timing counts measurement of nuclear radiation using ORTEC 974 Counter/Timer, an auto-timing counts virtual instrument system based on the LabVIEW virtual instrument development platform a...In order to achieve the auto-timing counts measurement of nuclear radiation using ORTEC 974 Counter/Timer, an auto-timing counts virtual instrument system based on the LabVIEW virtual instrument development platform and GPIB instrument control and transmission bus protocol is designed in this paper. By introducing software timing technique, the minimum time base of factory setting improves from 0.1 s to 0.03 s. The timing counts performance and longtime stability are also discussed in detail. The automatic data recording and saving facilitates data analysis and processing. Its real-time display and statistic function is very convenient for monitoring the nuclear radiation.展开更多
The Shanghai Synchrotron Radiation Facility (SSRF) needs extremely precise power supplies for their various magnets. A digital controller is being developed for the power converters of the SSRF power supply (PS). In t...The Shanghai Synchrotron Radiation Facility (SSRF) needs extremely precise power supplies for their various magnets. A digital controller is being developed for the power converters of the SSRF power supply (PS). In the digital controller, a fully digital pulse-width modulator (PWM) directly controls the power unit insulated gate bipolar transistor (IGBT) of the PS. A program in LabVIEW language has been developed to control and monitor the digital PS via serial communication (RS232) from a PC and to modify its parameters as well. In this article, the software design of the virtual instrument for controlling and monitoring digitalized PS and its associated functions are described, and the essential elements of the program graphical main-VI and sub-VI source code are presented and explained. The com- munication protocol and the structure of the developed system are also included in this article.展开更多
Virtual instrument is playing the important role in automatic test system. This paper introduces a composition of a virtual instrument automatic test system and takes the VXIbus based a test software platform which is...Virtual instrument is playing the important role in automatic test system. This paper introduces a composition of a virtual instrument automatic test system and takes the VXIbus based a test software platform which is developed by CAT lab of the UESTC as an example. Then a method to model this system based on Petri net is proposed. Through this method, we can analyze the test task scheduling to prevent the deadlock or resources conflict. At last, this paper analyzes the feasibility of this method.展开更多
Virtual Instruments, which have the most brilliant prospect in the domain of instruments, are the combination of the computers and traditional instruments. According to the constructions and the characters of the Teac...Virtual Instruments, which have the most brilliant prospect in the domain of instruments, are the combination of the computers and traditional instruments. According to the constructions and the characters of the Teaching Lab Instruments, the paper introduces the principle and design of Virtual Instrument System. Meanwhile, a practical application is indicated.展开更多
To measure the working band of a digital attenuator automatically,a program based on virtual instrument was carried out,using Agilent E8362B network analyzer as its measuring tool.In the program,the attenuation values...To measure the working band of a digital attenuator automatically,a program based on virtual instrument was carried out,using Agilent E8362B network analyzer as its measuring tool.In the program,the attenuation values can be automatically written into Excel table to form the frequency-attenuation curve.Finally,through analyzing the attenuation in different frequency,the best working band of the digital attenuator can be determined easily,and the whole process is automated.Compared with the traditional way of changing the measured parameters manually and recording the measured data one by one,the developed method in the paper can avoid the cumbersome manual operation and its possible errors to improve the measurement accuracy and efficiency.展开更多
基金This project is supported by National Natural Science Foundation of China(No.50135050).
文摘A new concept called intelligent virtual control (IVC), which can be drivenby measuring functions, is put forward. This small 'intelligent measurement instrument unit (IMIU)',carrying with functions of instrument, consists of different types of intelligent virtualinstrument (IVI) through individual components together as building blocks and can be displayeddirectly on the computer screen. This is a new concept of measuring instrument, and also animportant breakthrough after virtual instrument (VI). Virtual control makes instrument resourcesobtain further exploitation. It brings about a fundamental change to the design and manufacturingmode. The instrument therefore, can not only be produced directly inside a PC, but the product isinvolved in the 'green product' system. So far, all the present digital instruments will grow to bereplaced by intelligent control with green characteristics.
文摘Based on the recently quick-developing time-frequency analysis (TFA)technique and virtual instrument (VI) technique, a virtual instrument in characteristic analysis ofrotating machinery is researched and developed successfully. By utilizing instantaneous frequencyestimation (IFE) theoretics of TFA technique, and based on IFE of peak searching on thetime-frequency spectrum, order analysis (OA) functions is put forward and implemented, such as orderspectrum, order spectrum matrix, order tracking, order tracking filtering, and order componentextraction, etc. Unlike the home and abroad existing popular characteristic analyzers, which needkey phasing devices such as shaft encoder, phase-locked loop (PLL), phase-locked multiple frequency,tachometer, etc, to implement constant angle sampling directly or indirectly, whereas thisinstrument only uses the vibration signal of rotating machinery to carry out OA. This instrumentmakes up the shortage of these traditional instruments in analyzing the non-stationary signal ofrun-up and run-down process of rotating machinery. Therefore, it is a great breakthrough for theexisting order analyzers.
文摘After analyzing and comparing the traditional automobile instrument,the onboard instrument based on virtual instrument technology is designed in this paper.The PC/104 computer was employed as the core processing unit of the onbaard in- strument,and the several intelligent data acquisition nodes are set and connected by the CAN bus,through which the nodes can com- municate with the core processing unit.The information of the vehicle’s working condition can be displayed synthetically by adopt- ing virtual instrument technology.When the working condition goes beyond its limit,the system can emit an alarm,record and storage the abnormal condition automatically,and suggest how to deal with the abnormity urgently.The development background and design idea of onboard information system were elaborated in the paper.The software,the hardware architecture and the principle of onboard information system were introduced in detail.
基金Project supported by the National Natural Science Foundation of China(Grant No.608320036)
文摘A novel three-dimensional（3D） imaging lidar system which is based on a virtual instrument technique is introduced in this paper. The main characteristics of the system include： the capability of modeling a 3D object in accordance with the actual one by connecting to a geographic information system（GIS）, and building the scene for the lidar experiment including the simulation environment. The simulation environment consists of four parts： laser pulse, atmospheric transport,target interaction, and receiving unit. Besides, the system provides an interface for the on-site experiment. In order to process the full waveform, we adopt the combination of pulse accumulation and wavelet denoising for signal enhancement.We also propose an optimized algorithm for data decomposition： the V-L decomposition method, which combines Vondrak smoothing and laser-template based fitting. Compared with conventional Gaussian decomposition, the new method brings an improvement in both precision and resolution of data decomposition. After applying V-L decomposition to the lidar system, we present the 3D reconstructed model to demonstrate the decomposition method.
文摘Through investigating intelligent diagnosis method of Computational Intelligence (CI) and studying its application in fault feature extraction, a gear fault detection and Virtual Instrument Diagnostic System is developed by using the two hybrid programming method which combines both advantages of VC++ and MATLAB. The interface is designed by VC++ and the calculation of test data, signal processing and graphical display are completed by MATLAB. The pro-gram converted from M-file to VC++ is completed by interface software, and a various multi-functional gear fault di-agnosis software system is successfully obtained. The software system, which has many functions including the intro-duction of gear vibration signals, signal processing, graphical display, fault detection and diagnosis, monitoring and so on, especially, the ability of diagnosing gear faults. The method has an important application in the field of mechanical fault diagnosis.
基金Project (50235030) supported by the National Natural Science Foundation of China
文摘A virtual instrument(Ⅵ) was developed to monitor the technological parameters in the process of brush plating, including coating thickness, brush-plating current, current density, deposition rate, and brush plating voltage. Meanwhile two approaches were presented to improve the measurement accuracy of coating thickness. One of them aims at eliminating the random interferences by moving average filtering; while the other manages to calculate the quantity of electricity consumed accurately with rectangular integration. With these two approaches, the coating thickness can be measured in real time with higher accuracy than the voltage-frequency conversion method. During the process of plating all the technological parameters are displayed visually on the front panel of the Ⅵ. Once brush current or current density overruns the limited values, or when the coating thickness reaches the objective value, the virtual will alarm. With this Ⅵ, the solution consumption can be decreased and the operating efficiency is improved.
文摘In order to achieve the auto-timing counts measurement of nuclear radiation using ORTEC 974 Counter/Timer, an auto-timing counts virtual instrument system based on the LabVIEW virtual instrument development platform and GPIB instrument control and transmission bus protocol is designed in this paper. By introducing software timing technique, the minimum time base of factory setting improves from 0.1 s to 0.03 s. The timing counts performance and longtime stability are also discussed in detail. The automatic data recording and saving facilitates data analysis and processing. Its real-time display and statistic function is very convenient for monitoring the nuclear radiation.
文摘The Shanghai Synchrotron Radiation Facility (SSRF) needs extremely precise power supplies for their various magnets. A digital controller is being developed for the power converters of the SSRF power supply (PS). In the digital controller, a fully digital pulse-width modulator (PWM) directly controls the power unit insulated gate bipolar transistor (IGBT) of the PS. A program in LabVIEW language has been developed to control and monitor the digital PS via serial communication (RS232) from a PC and to modify its parameters as well. In this article, the software design of the virtual instrument for controlling and monitoring digitalized PS and its associated functions are described, and the essential elements of the program graphical main-VI and sub-VI source code are presented and explained. The com- munication protocol and the structure of the developed system are also included in this article.
基金Supported by the Ministry of Education for Ph. D (20030614006)
文摘Virtual instrument is playing the important role in automatic test system. This paper introduces a composition of a virtual instrument automatic test system and takes the VXIbus based a test software platform which is developed by CAT lab of the UESTC as an example. Then a method to model this system based on Petri net is proposed. Through this method, we can analyze the test task scheduling to prevent the deadlock or resources conflict. At last, this paper analyzes the feasibility of this method.
文摘Virtual Instruments, which have the most brilliant prospect in the domain of instruments, are the combination of the computers and traditional instruments. According to the constructions and the characters of the Teaching Lab Instruments, the paper introduces the principle and design of Virtual Instrument System. Meanwhile, a practical application is indicated.
基金Fujian Province Key Technology Projects Fund(No.2006H0092)
文摘To measure the working band of a digital attenuator automatically,a program based on virtual instrument was carried out,using Agilent E8362B network analyzer as its measuring tool.In the program,the attenuation values can be automatically written into Excel table to form the frequency-attenuation curve.Finally,through analyzing the attenuation in different frequency,the best working band of the digital attenuator can be determined easily,and the whole process is automated.Compared with the traditional way of changing the measured parameters manually and recording the measured data one by one,the developed method in the paper can avoid the cumbersome manual operation and its possible errors to improve the measurement accuracy and efficiency.
