Virtual instrument is playing the important role in automatic test system. This paper introduces a composition of a virtual instrument automatic test system and takes the VXIbus based a test software platform which is...Virtual instrument is playing the important role in automatic test system. This paper introduces a composition of a virtual instrument automatic test system and takes the VXIbus based a test software platform which is developed by CAT lab of the UESTC as an example. Then a method to model this system based on Petri net is proposed. Through this method, we can analyze the test task scheduling to prevent the deadlock or resources conflict. At last, this paper analyzes the feasibility of this method.展开更多
On account of the multiformity of MEMS devices, it is necessary to integrate with some optical measurement techniques for meeting static and dynamic unit test requirements. In this paper, an automated MEMS test system...On account of the multiformity of MEMS devices, it is necessary to integrate with some optical measurement techniques for meeting static and dynamic unit test requirements. In this paper, an automated MEMS test system is built of some commercially available components and instruments based on virtual instrument technology. The system is integrated with stroboscopic imaging, computer micro-vision, microscopic Mirau phase shifting interferometry, and laser Doppler vibrometer, and is used for the measurement of full-view in-plane and out-of-plane geometric parameters and periodical motions and single spot out-of-plane transient motion. The system configuration and measurement methods are analyzed, and some applications of the measurement of in-plane and out-of-plane dimensions and motions were described. The measurement accuracy of in-plane dimensions and out-of-plane dimensional is better than 0.2 um and 5 nm respectively. The resolution of measuring in-plane and out-of-plane motions is better than 15 nm and 2 nm respectively.展开更多
Readout integrated circuit(ROIC) is one of the most important components for hybrid-integrated infrared focal plane array(IRFPA). And it should be tested to ensure the product yield before bonding. This paper presents...Readout integrated circuit(ROIC) is one of the most important components for hybrid-integrated infrared focal plane array(IRFPA). And it should be tested to ensure the product yield before bonding. This paper presents an on-wafer testing system based on Labview for ROIC of IRFPA. The quantitative measurement can be conducted after determining whether there is row crosstalk or not in this system. This low-cost system has the benefits of easy expansion, upgrading, and flexibility, and it has been employed in the testing of several kinds of IRFPA ROICs to measure the parameters of saturated output voltage, non-uniformity, dark noise and dynamic range, etc.展开更多
This paper adopts American National Instruments (NI) Company’s LabVIEW and LabVIEW RT virtual instrument softwareplatform and lots of things for this engine performance LabVIEW virtual instrument test system, such as...This paper adopts American National Instruments (NI) Company’s LabVIEW and LabVIEW RT virtual instrument softwareplatform and lots of things for this engine performance LabVIEW virtual instrument test system, such as the matched NI PCI dataCollection Card, NI SCXI signal-adjusting instrument and NI compact FieldPoint (cFP) distributed I/O real time system hardware.This system has realized multi performances’parallel test; and it can complete load, torsional moment, rotate speed, power, pressureand temperature’s real time monitoring automatically according to user’s setting; and finally through TCP/IP protocol it realizes testdata’s teleshare and telecontrol that user put on the test system. This system has such character as short development period, highuse efficiency and low cost, at the same time it has strong extensibility and reusability, so it has very high applied cost.展开更多
After analyzing and comparing the traditional automobile instrument,the onboard instrument based on virtual instrument technology is designed in this paper.The PC/104 computer was employed as the core processing unit ...After analyzing and comparing the traditional automobile instrument,the onboard instrument based on virtual instrument technology is designed in this paper.The PC/104 computer was employed as the core processing unit of the onbaard in- strument,and the several intelligent data acquisition nodes are set and connected by the CAN bus,through which the nodes can com- municate with the core processing unit.The information of the vehicle’s working condition can be displayed synthetically by adopt- ing virtual instrument technology.When the working condition goes beyond its limit,the system can emit an alarm,record and storage the abnormal condition automatically,and suggest how to deal with the abnormity urgently.The development background and design idea of onboard information system were elaborated in the paper.The software,the hardware architecture and the principle of onboard information system were introduced in detail.展开更多
CNC machine have a fast development and is widely used in China. Generally, CNC machine tool, includs CNC lathes and CNC milling machine. CNC machine tool is a necessary tool for machining. It plays an important role ...CNC machine have a fast development and is widely used in China. Generally, CNC machine tool, includs CNC lathes and CNC milling machine. CNC machine tool is a necessary tool for machining. It plays an important role in the mechanical design and machining fields. CNC machine tool is mainly composed of two parts of the machine body and the computer control system. Mechanical equipment failures usually related information such as vibration, sound, pressure, temperature performance. CNC machine tool vibration monitoring system with piezoelectric accelerometer, the eddy current displacement sensor, signal amplifier, signal conditioning modules. We can take an advantage of the CNC machine tool vibration monitoring system for vibration monitoring and fault diagnosis of CNC machine tools.展开更多
A simple,stable and reliable virtual logic analyzer is presented. The logic analyzer had two modules:one was the test pattern generation module,the other was the logic monitoring module. Combining the two modules,one ...A simple,stable and reliable virtual logic analyzer is presented. The logic analyzer had two modules:one was the test pattern generation module,the other was the logic monitoring module. Combining the two modules,one is able to test a digital circuit automatically. The user interface of the logic analyzer was programmed with LabVIEW. Two Arduino UNO boards were used as the hardware targets to input and output the logic signals. The maximum pattern update rate was set to be 20 Hz. The maximum logic sampling rate was set to be 200 Hz. After twelve thousand cycles of exhaustive tests,the logic analyzer had a 100% accuracy. As a tutorial showing how to build virtual instruments with Arduino,the software detail is also explained in this article.展开更多
为降低设备故障对模拟电子技术实验教学效率的影响,基于虚拟仪器技术设计了一种集成运放自动测试教学辅助平台。利用集成化虚拟仪器实验平台NI ELVIS II进行数据传输,设计了测试电路板卡;利用Lab-VIEW软件设计了仪器面板和平台软件部分...为降低设备故障对模拟电子技术实验教学效率的影响,基于虚拟仪器技术设计了一种集成运放自动测试教学辅助平台。利用集成化虚拟仪器实验平台NI ELVIS II进行数据传输,设计了测试电路板卡;利用Lab-VIEW软件设计了仪器面板和平台软件部分。使用集成运放μA714芯片对平台进行了测试,并在模拟电子技术的实际教学中进行了效果验证。测试和实际使用结果表明,该平台可以准确检测出故障芯片,正确率>95%;相比于未使用本平台时,师生使用本平台进行实验的准确率提升超过20%,耗时降低超过20%。展开更多
基金Supported by the Ministry of Education for Ph. D (20030614006)
文摘Virtual instrument is playing the important role in automatic test system. This paper introduces a composition of a virtual instrument automatic test system and takes the VXIbus based a test software platform which is developed by CAT lab of the UESTC as an example. Then a method to model this system based on Petri net is proposed. Through this method, we can analyze the test task scheduling to prevent the deadlock or resources conflict. At last, this paper analyzes the feasibility of this method.
基金Supported by National Natural Science Foundation of China (No.50505031)Tianjin Municipal Science and Technology Commission(No.043185911)Programfor NewCentury Excellent Talents in University
文摘On account of the multiformity of MEMS devices, it is necessary to integrate with some optical measurement techniques for meeting static and dynamic unit test requirements. In this paper, an automated MEMS test system is built of some commercially available components and instruments based on virtual instrument technology. The system is integrated with stroboscopic imaging, computer micro-vision, microscopic Mirau phase shifting interferometry, and laser Doppler vibrometer, and is used for the measurement of full-view in-plane and out-of-plane geometric parameters and periodical motions and single spot out-of-plane transient motion. The system configuration and measurement methods are analyzed, and some applications of the measurement of in-plane and out-of-plane dimensions and motions were described. The measurement accuracy of in-plane dimensions and out-of-plane dimensional is better than 0.2 um and 5 nm respectively. The resolution of measuring in-plane and out-of-plane motions is better than 15 nm and 2 nm respectively.
文摘Readout integrated circuit(ROIC) is one of the most important components for hybrid-integrated infrared focal plane array(IRFPA). And it should be tested to ensure the product yield before bonding. This paper presents an on-wafer testing system based on Labview for ROIC of IRFPA. The quantitative measurement can be conducted after determining whether there is row crosstalk or not in this system. This low-cost system has the benefits of easy expansion, upgrading, and flexibility, and it has been employed in the testing of several kinds of IRFPA ROICs to measure the parameters of saturated output voltage, non-uniformity, dark noise and dynamic range, etc.
文摘This paper adopts American National Instruments (NI) Company’s LabVIEW and LabVIEW RT virtual instrument softwareplatform and lots of things for this engine performance LabVIEW virtual instrument test system, such as the matched NI PCI dataCollection Card, NI SCXI signal-adjusting instrument and NI compact FieldPoint (cFP) distributed I/O real time system hardware.This system has realized multi performances’parallel test; and it can complete load, torsional moment, rotate speed, power, pressureand temperature’s real time monitoring automatically according to user’s setting; and finally through TCP/IP protocol it realizes testdata’s teleshare and telecontrol that user put on the test system. This system has such character as short development period, highuse efficiency and low cost, at the same time it has strong extensibility and reusability, so it has very high applied cost.
文摘After analyzing and comparing the traditional automobile instrument,the onboard instrument based on virtual instrument technology is designed in this paper.The PC/104 computer was employed as the core processing unit of the onbaard in- strument,and the several intelligent data acquisition nodes are set and connected by the CAN bus,through which the nodes can com- municate with the core processing unit.The information of the vehicle’s working condition can be displayed synthetically by adopt- ing virtual instrument technology.When the working condition goes beyond its limit,the system can emit an alarm,record and storage the abnormal condition automatically,and suggest how to deal with the abnormity urgently.The development background and design idea of onboard information system were elaborated in the paper.The software,the hardware architecture and the principle of onboard information system were introduced in detail.
基金supported by 2017 Jieyang Science and Technology Innovation and Development Special Fund Project(2017xm014)2018 Key Scientific Research Platform and Project of Guangdong Universities(2018GkQNCX079)
文摘CNC machine have a fast development and is widely used in China. Generally, CNC machine tool, includs CNC lathes and CNC milling machine. CNC machine tool is a necessary tool for machining. It plays an important role in the mechanical design and machining fields. CNC machine tool is mainly composed of two parts of the machine body and the computer control system. Mechanical equipment failures usually related information such as vibration, sound, pressure, temperature performance. CNC machine tool vibration monitoring system with piezoelectric accelerometer, the eddy current displacement sensor, signal amplifier, signal conditioning modules. We can take an advantage of the CNC machine tool vibration monitoring system for vibration monitoring and fault diagnosis of CNC machine tools.
文摘A simple,stable and reliable virtual logic analyzer is presented. The logic analyzer had two modules:one was the test pattern generation module,the other was the logic monitoring module. Combining the two modules,one is able to test a digital circuit automatically. The user interface of the logic analyzer was programmed with LabVIEW. Two Arduino UNO boards were used as the hardware targets to input and output the logic signals. The maximum pattern update rate was set to be 20 Hz. The maximum logic sampling rate was set to be 200 Hz. After twelve thousand cycles of exhaustive tests,the logic analyzer had a 100% accuracy. As a tutorial showing how to build virtual instruments with Arduino,the software detail is also explained in this article.
文摘为降低设备故障对模拟电子技术实验教学效率的影响,基于虚拟仪器技术设计了一种集成运放自动测试教学辅助平台。利用集成化虚拟仪器实验平台NI ELVIS II进行数据传输,设计了测试电路板卡;利用Lab-VIEW软件设计了仪器面板和平台软件部分。使用集成运放μA714芯片对平台进行了测试,并在模拟电子技术的实际教学中进行了效果验证。测试和实际使用结果表明,该平台可以准确检测出故障芯片,正确率>95%;相比于未使用本平台时,师生使用本平台进行实验的准确率提升超过20%,耗时降低超过20%。
