期刊文献+
共找到572篇文章
< 1 2 29 >
每页显示 20 50 100
Finishing Effect on Warmth Property of Cotton/Kapok Blended Knitted Fabric 被引量:2
1
作者 苏美儿 赵俐 《Journal of Donghua University(English Edition)》 EI CAS 2015年第4期620-625,共6页
Nowadays,more and more natural or functional fibers are being investigated due to their utilization in thermal underwear.Kapok fiber is one of the natural cellulosic fibers whose source is the kapok plant. It has holl... Nowadays,more and more natural or functional fibers are being investigated due to their utilization in thermal underwear.Kapok fiber is one of the natural cellulosic fibers whose source is the kapok plant. It has hollow body and sealed tail,which exhibits desirable features required for functional textiles of this nature. In this study,cotton / kapok( 80 /20 by mass) blended yarn with two types of yarn size 18. 5 and 14. 8 tex,respectively are knitted into plain stitches. The fabrics are undergone with an optimal preparation plan according to orthogonal design. Then,after dyeing and softening,fabric properties including thermal and water-vapour resistances, wicking property, pilling behaviour, and surface morphology,are tested and scrutinized for their candidacy for thermal underwear. The results showed that cotton / kapok blended fabrics have good thermal resistance which is significantly higher than those of cotton / modal blended fabrics,and the same water vapour resistance compared with cotton / modal blended fabrics which are normally used as underwear. Cotton / modal blended knitted fabrics has better pilling grade than cotton / kapok blended fabrics. Meanwhile, the cotton / kapok blends fabrics have good wicking property. Collectively,it was concluded that cotton / kapok blended fabric was appropriate for thermal underwear. However,the main limitation of these fabrics is their pilling properties. 展开更多
关键词 cotton / kapok blended yarn knitted fabric orthogonal design performance thermal underwear
下载PDF
Bioscouring Knitted Cotton Fabric with an Experimental Pectate Lyase
2
作者 D K Appiah 毛志平 吕家华 《Journal of Donghua University(English Edition)》 EI CAS 2007年第6期771-773,780,共4页
An experimental pectate lyase enzyme was used to scour knitted cotton fabric and the emphasis was on pectin removal.Using an enzyme dosage of 0.2 g/L at temperature 55℃ and pH 6.35 for 30 min,good scouring properties... An experimental pectate lyase enzyme was used to scour knitted cotton fabric and the emphasis was on pectin removal.Using an enzyme dosage of 0.2 g/L at temperature 55℃ and pH 6.35 for 30 min,good scouring properties were obtained.When appropriate concentrations of 1-Hydroxy Ethylidene-1,1-Diphosphonic Acid(HEDP)and CaCl2 were added,the percentage pectin removal improved significantly. 展开更多
关键词 pectate lyase SCOUR knitted cotton fabric pectin removal
下载PDF
Studying the Effect of Polyester Fiber Blend Ratio and Pilling Cycle on Blended Knit Fabrics
3
作者 Kazi Md. Elias Mohammad Obaidur Rahman H. M. Zakir Hossain 《Journal of Textile Science and Technology》 2023年第4期227-243,共17页
Pilling is a severe concern for blended fabrics. The aesthetic look and smoothness are the buyers’ prime requirements. The main focus of the study was to see the pilling behavior from various percentages of polyester... Pilling is a severe concern for blended fabrics. The aesthetic look and smoothness are the buyers’ prime requirements. The main focus of the study was to see the pilling behavior from various percentages of polyester fiber blend ratio as well as the different pilling cycles on blended fabrics. The cotton, polyester, and elastane prepared the study fabrics. These fabrics are (90% Cotton/5% Polyester/5% Elastane, 90% Cotton/6% Polyester/4% Elastane, 90% Cotton/7% Polyester/3% Elastane, 90% Cotton/8% Polyester/2% Elastane, and 90% Cotton/9% Polyester/1% Elastane, 85% Cotton/10% Polyester/5% Elastane, 85% Cotton/11% Polyester/4% Elastane, 85% Cotton/12% Polyester/3% Elastane, 85% Cotton/13% Polyester/2% Elastane, and 85% Cotton/ 14% Polyester/1% Elastane, 80% Cotton/15% Polyester/5% Elastane, 80% Cotton/16% Polyester/4% Elastane, 80% Cotton/17% Polyester/3% Elastane, 80% Cotton/18% Polyester/2% Elastane, and 80% Cotton/19% Polyester/1% Elastane). The selected polyester blend ratios were 5%, 6%, 7%, 8%, 9%, 10%, 11%, 12%, 13%, 14%, 15%, 16%, 17%, 18% and 19% respectively. The study used the Martindale pilling tester with 2000, 5000, and 7000 cycles, respectively. The evaluation followed the ISO 12945-2:2000. The study findings are that the polyester fiber blend ratio did not influence the pilling grade on blended fabrics for pilling cycles 2000, and the pilling grade remained constant at 4 - 5. The pilling grade started to deteriorate in pilling cycle 5000 for the fabrics 85%C/10%P/5%E, 85%C/11%P/4%E, 85%C/12%P/3%E, 85%C/ 13%P/2%E, 85%C/14%P/1%E showed the pilling grade 4, and the fabrics made from 80%C/15%P/5%E, 80%C/16%P/4%E, 80%C/17%P/3%E, 80%C/ 18%P/2%E, 80%C/19%P/1%E showed the pilling grade 4, 3, 3, 3, and 3 respectively. For the pilling cycles 7000, the pilling grade further deteriorated for the fabrics 80%C/15%P/5%E, 80%C/16%P/4%E, 80%C/17%P/3%E, 80%C/ 18%P/2%E, 80%C/19%P/1%E showed the pilling grade 3, 3, 2, 2, and 2 respectively. The study finds the dominance of polyester fiber throughout the experiment. The author hopes this study’s outcome will help new researchers, advanced researchers, and the textile industry’s sustainable development research and development team. 展开更多
关键词 PILLING cotton POLYESTER Elastane BLENDED knit fabric
下载PDF
Dyeing of S/J Cotton Knit Fabric with Natural Dye Extracts from Green Walnut Shells: Assessment of Mordanting Effect on Fastness Properties 被引量:1
4
作者 Zakaria   Md. Eanamul Haque Nizam +4 位作者 Md. Hasan Al Mamun Md. Abu Yousuf Ramjan Ali Lutfor Rahman Md. Raza Miah 《Journal of Textile Science and Technology》 2017年第2期17-30,共14页
In this study, aqueous extraction method is used because of its high extraction ratio, light fastness and also functional properties. In 1st phase, for dyeing S/J cotton knit fabric with green walnut power ferrous sul... In this study, aqueous extraction method is used because of its high extraction ratio, light fastness and also functional properties. In 1st phase, for dyeing S/J cotton knit fabric with green walnut power ferrous sulfate is considered as a mordant. In this study, three different mordanting methods such as pre-, meta-, and post-mordanting are conveyed the dyeing process with the state of metallic mordant and without metallic salt mordants. In 2nd phase, in dyeing for fixation ferrous sulfate was considered as mordants. Furthermore, the analysis and evaluation of each colour dyed material was done through following two terms for instance CIELAB (L*, a*, and b*) and K/S values. According to AATCC test methods, colour fastness to washing, crocking, perspiration of the dyed samples is determined whereas according to the ISO standard, the colour fastness to light was estimated and tested. When dyeing was carried out on S/J cotton knit fabric through considering optimum parameter like at 80&degC for 60 min and at pH 4 which showed optimum results. From the results we can see, very good wash fastness was obtained while there is no fading of the colour, whereas the outstanding and moderate level of colour fastness to light and crocking is achieved. 展开更多
关键词 Green WALNUT Shell Dye Extraction S/J cotton knit fabric Colour Strength FASTNESS
下载PDF
Effect of Elastane on Physical Properties of 1×1 Knit Rib Fabrics
5
作者 MOHAMMAD Abu Nasir Rakib LI Wei +1 位作者 SYED Rashedul Islam MD Obaidul Islam 《Journal of Donghua University(English Edition)》 EI CAS 2020年第3期207-210,共4页
Because of wearing and washing the knit rib fabrics are highly vulnerable to lose their dimensional stability.The work investigated the physical properties of 1×1 knit rib fabrics with or without elastane.The fab... Because of wearing and washing the knit rib fabrics are highly vulnerable to lose their dimensional stability.The work investigated the physical properties of 1×1 knit rib fabrics with or without elastane.The fabrics made from 100%cotton yarn were compared with the fabrics made from cotton/elastane(95%/5%)blended yarns by Lisky circular knitting machine.Pilling,shrinkage,spirality,and bursting strength were tested by the ICI pilling test box,Wascator,and TruBurst machine to demonstrate the effect of elastane on fabric properties.Experimental results showed that elastane has a noteworthy impact on the physical properties of 1×1 knit rib fabrics which can make the fabrics more durable and dimensionally stable in practice. 展开更多
关键词 1×1 knit rib fabrics elastane cotton PILLING spirality bursting strength shrinkage test
下载PDF
速练剂在棉针织物冷轧堆前处理中的应用
6
作者 李伟勇 唐启昌 +1 位作者 刘昊 杨绍基 《针织工业》 北大核心 2024年第6期51-54,共4页
探讨速练剂KR-9组合在棉针织物冷轧堆前处理加工中的应用,针对棉针织物冷轧堆前处理加工进行相关产品的性能检测试验,研究棉针织物冷轧堆前处理加工配套助剂的相关技术指标要求。结果表明,在棉针织物冷轧堆加工中使用速练剂KR-9组合后... 探讨速练剂KR-9组合在棉针织物冷轧堆前处理加工中的应用,针对棉针织物冷轧堆前处理加工进行相关产品的性能检测试验,研究棉针织物冷轧堆前处理加工配套助剂的相关技术指标要求。结果表明,在棉针织物冷轧堆加工中使用速练剂KR-9组合后直接水洗,其白度达到78.8%,瞬时毛效值为5.20cm,保证了前处理半成品的匀透效果,为提高成品的一次成功率提供了有力保障。 展开更多
关键词 速练剂KR-9 棉针织物 冷轧堆前处理 性能测试
下载PDF
BCI棉/再生涤混纺针织织物染整工艺 被引量:2
7
作者 罗明智 《印染助剂》 CAS 2024年第4期36-41,共6页
采用活性染料/分散染料对BCI棉/再生涤混纺针织织物进行染色,比较不同染色工艺的得色效果、耐汗渍色牢度、耐皂洗色牢度、耐摩擦色牢度以及耐光色牢度等指标,筛选BCI棉/再生涤混纺针织织物的大生产工艺,从而减少实际大生产时染色带来废... 采用活性染料/分散染料对BCI棉/再生涤混纺针织织物进行染色,比较不同染色工艺的得色效果、耐汗渍色牢度、耐皂洗色牢度、耐摩擦色牢度以及耐光色牢度等指标,筛选BCI棉/再生涤混纺针织织物的大生产工艺,从而减少实际大生产时染色带来废水对环境造成的污染,以优化染色质量与成本。实验结果表明:选择方案4#进行印染加工更加节约用水成本、时间成本、用电成本。染色织物耐干摩擦色牢度可达4~5级,耐湿摩擦色牢度可达3~4级,耐皂洗色牢度可达4~5级,耐汗渍色牢度达到4~5级,具有生产可行性。 展开更多
关键词 混纺针织织物 BCI棉 再生涤
下载PDF
腈纶、棉、胶原蛋白与黏胶混纺针织面料的开发
8
作者 丁春燕 夏建明 许衡渊 《针织工业》 北大核心 2024年第4期57-60,共4页
选用腈纶纤维、棉纤维、胶原蛋白纤维、黏胶纤维为原料,以30∶30∶20∶20比例进行混纺,开发一款含胶原蛋白的双面组织起毛绒面料。介绍了面料的织造工艺、染整工艺以及技术要点,并对面料的理化性能、弹性性能、保暖性能、回潮率和抗菌... 选用腈纶纤维、棉纤维、胶原蛋白纤维、黏胶纤维为原料,以30∶30∶20∶20比例进行混纺,开发一款含胶原蛋白的双面组织起毛绒面料。介绍了面料的织造工艺、染整工艺以及技术要点,并对面料的理化性能、弹性性能、保暖性能、回潮率和抗菌性能进行测试。结果表明:面料的各项物理和化学测试均能满足客户要求,弹性回复性、保暖性、吸湿性和抗菌性均优良,是新一代的保暖、亲肤、环保型面料。 展开更多
关键词 胶原蛋白 腈纶 黏胶 针织 环保 多功能
下载PDF
涤棉针织物练染一浴工艺 被引量:1
9
作者 张京彬 刘淑云 +2 位作者 陈华毅 张樱花 宁慧 《印染助剂》 CAS 2024年第3期38-42,共5页
针对涤棉针织物染整工艺流程长、耗水耗能高、生产效率低等问题,采用RY236对涤棉针织物进行练染一浴加工,分别讨论了双氧水用量、练染浴pH、保温时间及RY236用量对纯棉针织物前处理效果以及纯涤针织物染色性能的影响。优化后的练染一浴... 针对涤棉针织物染整工艺流程长、耗水耗能高、生产效率低等问题,采用RY236对涤棉针织物进行练染一浴加工,分别讨论了双氧水用量、练染浴pH、保温时间及RY236用量对纯棉针织物前处理效果以及纯涤针织物染色性能的影响。优化后的练染一浴工艺:双氧水用量为8 g/L,pH为5.5,RY236用量为1 g/L,染色温度为130℃,保温30 min。与传统工艺相比,该工艺能够降低生产成本,提高生产效率。 展开更多
关键词 涤棉针织物 一浴 前处理 染色 RY236
下载PDF
棉针织物铜或锰金属配合物漂白机理
10
作者 李荣健 温淑娟 +3 位作者 毛志平 陈八斤 金鲜花 纪柏林 《印染》 CAS 北大核心 2024年第6期13-17,共5页
为了阐明金属配合物对棉针织物的漂白机理及性能,研究了多吡啶类铜配合物(CAT-3)与大环多胺类锰配合物(JK500)对棉针织物白度和双氧水(H_(2)O_(2))分解率的影响。结果表明:CAT-3作催化剂时,优化的漂白工艺为NaOH 1.0 g/L、H_(2)O_(2)13 ... 为了阐明金属配合物对棉针织物的漂白机理及性能,研究了多吡啶类铜配合物(CAT-3)与大环多胺类锰配合物(JK500)对棉针织物白度和双氧水(H_(2)O_(2))分解率的影响。结果表明:CAT-3作催化剂时,优化的漂白工艺为NaOH 1.0 g/L、H_(2)O_(2)13 g/L、CAT-32.0 g/L,织物白度为68.97%;JK500作催化剂时,漂白优化工艺为NaOH 2.0 g/L、H_(2)O_(2)13 g/L、JK5002.5 g/L,织物白度为65.92%。75℃处理60 min后,CAT-3/H_(2)O_(2)体系中H_(2)O_(2)分解率达到60.93%,远高于无CAT-3时的12.31%;JK500/H_(2)O_(2)体系中H_(2)O_(2)分解率为19.25%,未加JK500时的分解率为18.18%。CAT-3/H_(2)O_(2)体系的羟基自由基(HO·)荧光检测强度远高于对照组C_(0);JK500/H_(2)O_(2)及其对照组J0体系的HO·荧光强度均较小;超氧自由基(O_(2)^(-)·)是两种催化体系有效的漂白活性成分,而单线态氧(1O2)对织物白度基本无影响。 展开更多
关键词 金属配合物 低温漂白 棉针织物 羟基自由基 超氧自由基
下载PDF
羊毛针织物活性染料少水介质染色工艺探究
11
作者 罗雨霓 王际平 蔡再生 《针织工业》 北大核心 2024年第9期48-53,共6页
介绍活性染料染液性质对羊毛针织物染色程度的影响,尤其是少水介质染色体系。探究3种不同活性基活性染料在少水介质染色体系中的工艺条件,探讨加酸量、加碱量、染色温度以及染液黏度在染色过程中与染料上染率和固色率间的关系。结果表明... 介绍活性染料染液性质对羊毛针织物染色程度的影响,尤其是少水介质染色体系。探究3种不同活性基活性染料在少水介质染色体系中的工艺条件,探讨加酸量、加碱量、染色温度以及染液黏度在染色过程中与染料上染率和固色率间的关系。结果表明:少水介质染色可实现羊毛针织物的无酸低碱低温染色;染液黏度主要影响初始上染率,染液黏度低上染快;少水介质染色可获得比传统水浴染色更高的上染率、固色率和色牢度。 展开更多
关键词 羊毛针织物 活性染料 少水介质 黏度 染色工艺
下载PDF
针织一体成形电容传感器设计及其性能
12
作者 李露红 罗天 丛洪莲 《纺织学报》 EI CAS CSCD 北大核心 2024年第10期80-88,共9页
针对柔性电容传感器的电极易暴露于外界环境和穿着舒适性差等问题,提出一种表面绝缘电极与介质层一体成形的针织电容传感器设计方法。进一步对传感器的力学性能、表面绝缘性能和传感性能进行探究,揭示了织物厚度与间隔丝直径对其性能的... 针对柔性电容传感器的电极易暴露于外界环境和穿着舒适性差等问题,提出一种表面绝缘电极与介质层一体成形的针织电容传感器设计方法。进一步对传感器的力学性能、表面绝缘性能和传感性能进行探究,揭示了织物厚度与间隔丝直径对其性能的影响。研究发现,织物厚度越大,间隔丝直径越小的传感器综合性能越好,其中厚度为8.0 mm、间隔丝直径为0.15 mm的传感器表现最佳,其灵敏度为0.033 kPa^(-1),并且具有较低的迟滞性和快速响应时间,对不同性质输入信号(不同压缩距离和不同压缩频率)均具有良好的分辨响应能力,且具有2 000次循环内的重复稳定性,在手部动作识别及液体称重场景展现出较好的压力传感能力。该传感器降低了生产成本,且应用过程中信号稳定,在可穿戴、医疗监测及人机交互界面展现出巨大的应用潜力。 展开更多
关键词 针织 柔性电极 间隔织物 电容式传感器 传感性能 可穿戴柔性设备 棉纱 锦纶
下载PDF
索罗娜混纺针织织物染色工艺的应用
13
作者 丁泽杰 孙志强 +1 位作者 罗明智 梁树文 《染整技术》 CAS 2024年第9期38-42,共5页
为了解决索罗娜混纺针织织物传统染色工艺耗水量大、工艺时间长、生产效率低的问题,改进了索罗娜混纺针织织物分散/活性染料染色工艺。新改进的工艺为:(1)135℃分散染料染色工序;(2)将温度降至98℃进行前处理工序,将温度降至95℃进行还... 为了解决索罗娜混纺针织织物传统染色工艺耗水量大、工艺时间长、生产效率低的问题,改进了索罗娜混纺针织织物分散/活性染料染色工艺。新改进的工艺为:(1)135℃分散染料染色工序;(2)将温度降至98℃进行前处理工序,将温度降至95℃进行还原清洗工序,再进行3次55℃洗水与1次85℃酸中和工序,剩余的残液排出;(3)常温进水,60℃活性染料染色工序;(4)将活性染料染色剩余的残液排入食毛工序;(5)2次55℃洗水与1次60℃酸中和工序,1次85℃皂煮工序,55℃固色工序,最后进行55℃制软工序。新工艺缩短了传统分散/活性染料染色的工艺流程。结果表明,新改进分散/活性染料染色工艺制得的织物色牢度可以达到传统工艺的水平,同时降低能源消耗,减少生产成本。 展开更多
关键词 索罗娜纤维 棉纤维 针织面料 阶段染色
下载PDF
涤/棉混纺针织物高效漂染一浴两步工艺
14
作者 陈光 王孟泽 +2 位作者 王飞 毛安琪 兰淑仙 《印染助剂》 CAS 2024年第9期48-52,共5页
高效漂染一浴两步工艺代替常规漂染工艺处理涤/棉混纺针织物,具有良好的棉精练及涤染色效果。工艺条件为:TF-213HL 0.5%(omf),分散染料0.5%(omf),浴比1∶10,130℃处理30 min,不排液降温至85℃处理30 min,并加入TF-1291K 1.0%(omf),NaOH ... 高效漂染一浴两步工艺代替常规漂染工艺处理涤/棉混纺针织物,具有良好的棉精练及涤染色效果。工艺条件为:TF-213HL 0.5%(omf),分散染料0.5%(omf),浴比1∶10,130℃处理30 min,不排液降温至85℃处理30 min,并加入TF-1291K 1.0%(omf),NaOH 0.6%(omf),H_(2)O_(2)8.0%(omf)。 展开更多
关键词 涤/棉 针织物 漂染 一浴两步
下载PDF
无氟防水防油剂X-8801在纯棉针织上的异面整理研究
15
作者 赵凯 涂伟文 《染整技术》 CAS 2024年第6期19-22,共4页
选用具有防水防植物油性质的无氟整理剂X-8801、缔合型聚氨酯增稠剂AX-230和交联剂AX-101P,采用丝网印花的方法对纯棉针织物进行单面防水防污整理。探讨增稠剂用量、整理剂用量、焙烘温度和交联剂用量对整理效果的影响,测试了整理织物... 选用具有防水防植物油性质的无氟整理剂X-8801、缔合型聚氨酯增稠剂AX-230和交联剂AX-101P,采用丝网印花的方法对纯棉针织物进行单面防水防污整理。探讨增稠剂用量、整理剂用量、焙烘温度和交联剂用量对整理效果的影响,测试了整理织物的手感和色变性能。结果表明,整理织物的防水防污面抗湿性可以达到4级,对老抽和玉米油的耐沾污性可以达到5级,同时织物的未处理面仍可保持本身的亲水性,润湿时间为1 s,且织物的手感和色变较小。结合交联剂AX-101P使用,可以提升整理效果的耐洗性,水洗5次后,抗湿性为3级,对老抽和玉米油的耐沾污性为5级。优化整理工艺为:无氟整理剂X-880170 g/L,交联剂AX-101P 10 g/L,增稠剂AX-23015%,150~170℃焙烘90 s。 展开更多
关键词 无氟 防水防污 异面整理 植物油 纯棉针织
下载PDF
NMMO法用于棉与黏纤混纺织物定量分析的探讨
16
作者 袁颖 龚婕 黄怡婧 《针织工业》 北大核心 2024年第4期85-88,共4页
为了筛选出适用于棉与黏纤混纺产品的简便环保的定量分析方法,选取市场上常见的棉与黏纤混纺产品,用不同的化学方法和物理方法进行对比试验。结果表明:显微镜物理法准确性较高,但对试验人员要求较高且耗时长;59.5%硫酸法对黏纤溶解不充... 为了筛选出适用于棉与黏纤混纺产品的简便环保的定量分析方法,选取市场上常见的棉与黏纤混纺产品,用不同的化学方法和物理方法进行对比试验。结果表明:显微镜物理法准确性较高,但对试验人员要求较高且耗时长;59.5%硫酸法对黏纤溶解不充分,定量准确性低;甲酸-氯化锌法对棉纤维质量损失较大,且甲酸挥发性强;37.0%盐酸法试剂为强酸且挥发性强,对设备有腐蚀、对试验人员有危害;综合比较得出,NMMO法定量准确性高、操作简便,溶剂无异味、无毒性、环保安全。 展开更多
关键词 棉与黏纤混纺织物 NMMO法 定量分析 纤维含量检测
下载PDF
Development of Longer-Lasting Insect Repellence Cellulosic Based Curtain Fabrics 被引量:2
17
作者 Shahba Afaf Farag Halawa Osama +1 位作者 Ragaei Mohamed Hashem Mohamed 《Materials Sciences and Applications》 2011年第3期200-208,共9页
Long lasting insect repellent curtain fabrics were developed and characterized. Different types of fabrics which are generally used in manufacture of curtain fabrics were functionalized with monochlorotriazenyl β-cyc... Long lasting insect repellent curtain fabrics were developed and characterized. Different types of fabrics which are generally used in manufacture of curtain fabrics were functionalized with monochlorotriazenyl β-cyclodextrin (MCT-β-CD) then treated with different concentration from permethrin to impart the fabric insect repellent properties. These fabrics were 100% cotton, cotton/viscose, cotton/linen, polyester/cotton, polyester/linen and polyester/viscose blend fabrics. The treated curtain fabrics were evaluated for insect repellent retention capacity against mosquitoes. The repellent efficacy comprises the determination of percent mosquitoes repelled, knockdown and killed (mortality) resulting from exposed mosquitoes to the treated fabric. Results obtained shows that, the insect repellent retention capacity of curtain fabrics functionalized with R-β-CD then treated with permethrin depends on the amount of β-CD moieties on the curtain fabrics, type of fabric and permethrin concentration. Higher action is obtained when the fabric was functionalized with 100 g/L, MCT-β-CD in alkaline medium followed by treatment with 15 g/L permethrin. The results show also that, curtain fabric made of cotton/linen shows highest mosquitoes repellent retention capacity and highest resistance against washing compared with 100% cotton or cotton/viscose or polyester based curtain fabrics. The insect repellent treatment of curtain fabrics did not adversely affect the tensile strength or drapability index of curtain 展开更多
关键词 cotton CURTAIN fabricS β-Cyclodextrin LINEN INSECT REPELLENT fabric Polyester viscose
下载PDF
新型低温前处理剂在棉针织布上的应用 被引量:1
18
作者 李伟勇 冯富添 +2 位作者 李冬梅 梁树文 刘昊 《印染助剂》 CAS 2023年第2期39-42,共4页
为了开发高效节能的前处理工艺,采用新型低温前处理剂净棉灵VASCOUR■IR-04对棉针织布进行前处理。大生产实验结果表明,VASCOUR■IR-04在80℃下能够高效去除棉纤维中的杂质和色素,获得较好的白度和毛效,以21s精棉平纹布为例,白度为83.1... 为了开发高效节能的前处理工艺,采用新型低温前处理剂净棉灵VASCOUR■IR-04对棉针织布进行前处理。大生产实验结果表明,VASCOUR■IR-04在80℃下能够高效去除棉纤维中的杂质和色素,获得较好的白度和毛效,以21s精棉平纹布为例,白度为83.1,毛效为15.2 cm/30 min,且半成品具有良好的染深性。相较于传统前处理工艺,采用VASCOUR■IR-04在相同的前处理温度条件下,处理时间可以缩短30 min,毛效与白度基本一致,强力损失降低5%~8%。 展开更多
关键词 棉针织布 低温前处理剂 前处理
下载PDF
碳化棉与黏胶针织物应变传感器的制备与性能
19
作者 张静 龙海如 张佩华 《东华大学学报(自然科学版)》 CAS 北大核心 2023年第3期33-38,共6页
为系统探究碳化针织物柔性应变传感器的传感性能,对棉与黏胶针织物进行碳化处理使其成为导电材料,再与热塑性聚氨酯薄膜进行复合,制得6种柔性应变传感器。通过拉伸试验,研究传感器的拉伸方向、纤维材料及碳化后织物组织结构和密度对传... 为系统探究碳化针织物柔性应变传感器的传感性能,对棉与黏胶针织物进行碳化处理使其成为导电材料,再与热塑性聚氨酯薄膜进行复合,制得6种柔性应变传感器。通过拉伸试验,研究传感器的拉伸方向、纤维材料及碳化后织物组织结构和密度对传感器的灵敏系数、重现性等传感性能的影响。结果表明:沿横列方向拉伸时传感器的传感性能优于沿纵行方向拉伸;以棉纤维为原料制备的应变传感器的综合传感性能优于黏胶;棉纬平针织物应变传感器的综合传感性能最佳,1×1罗纹织物次之,双罗纹织物最差;织物密度越小,传感器的传感性能越好。该研究对应变传感器的设计具有一定的指导意义。 展开更多
关键词 针织物应变传感器 碳化棉 碳化黏胶 灵敏系数 重现性
下载PDF
棉锦弹力数码印花罗马布平幅染整生产实践
20
作者 薛桂萍 文水平 +2 位作者 刘昊 陈丽媚 庄育盛 《印染》 CAS 北大核心 2023年第12期26-29,共4页
采用平幅前处理、涂料数码印花对棉锦弹力罗马布进行染整加工处理,解决了绳状前处理毛羽多、鸡爪痕多、幅宽不稳定的质量问题;克服了活性墨水、酸性墨水数码印花棉锦织物不能同步上染、印花部位有白点的缺陷。该工艺生产的棉锦印花罗马... 采用平幅前处理、涂料数码印花对棉锦弹力罗马布进行染整加工处理,解决了绳状前处理毛羽多、鸡爪痕多、幅宽不稳定的质量问题;克服了活性墨水、酸性墨水数码印花棉锦织物不能同步上染、印花部位有白点的缺陷。该工艺生产的棉锦印花罗马布花纹清晰、色彩饱和度高、色域广、布面折痕小、毛羽少、门幅整齐、产品质量稳定,且加工过程高效低耗、节能减排。 展开更多
关键词 平幅前处理 数码印花 涂料墨水 棉锦弹力针织物 罗马布
下载PDF
上一页 1 2 29 下一页 到第
使用帮助 返回顶部