Adaptive Robust Servo Control for Vertical Electric Stabilization System of Tank and Experimental Validation

A tracking stability control problem for the vertical electric stabilization system of moving tank based on adaptive robust servo control is addressed.This paper mainly focuses on two types of possibly fast timevarying but bounded uncertainty within the vertical electric stabilization system:model parameter uncertainty and uncertain nonlinearity.First,the vertical electric stabilization system is constructed as an uncertain nonlinear dynamic system that can reflect the practical mechanics transfer process of the system.Second,the dynamical equation in the form of state space is established by designing the angular tracking error.Third,the comprehensive parameter of system uncertainty is designed to estimate the most conservative effects of uncertainty.Finally,an adaptive robust servo control which can effectively handle the combined effects of complex nonlinearity and uncertainty is proposed.The feasibility of the proposed control strategy under the practical physical condition is validated through the tests on the experimental platform.This paper pioneers the introduction of the internal nonlinearity and uncertainty of the vertical electric stabilization system into the settlement of the tracking stability control problem,and validates the advanced servo control strategy through experiment for the first time.

Research and Application of"Soft"Devices for Realizing Servo Amplification

This article analyzes and discusses the working principle and problems encountered by various servo amplification devices used in the on-site continuous adjustment system,analyzes and discusses the application of the servo mechanism,and analyzes the mechanism of the servo device's implementation of the"positioning"func-tion on the control device.Intended to guide the continuous adjustment process in controlling the function/accuracy of actuator equipment and application debugging,ensuring the safe and stable operation of production equipment and facilities.

Sliding Mode Variable Structure Control for Visual Servoing System

A visual servoing tracking controller is proposed based on the sliding mode control theory in order to achieve strong robustness against parameter variations and external disturbances. A sliding plane with time delay compensation is presented by the pre-estimate of states. To reduce the chattering of the sliding mode controller, a modified exponential reaching law and hyperbolic tangent function are applied to the design of visual controller and robot joint controller. Simulation results show that the visual servoing control scheme is robust and has good tracking performance.

SVM-based Identification and Un-calibrated Visual Servoing for Micro-manipulation

This paper presents an improved support vector machine （SVM） algorithm, which employs invariant moments-based edge extraction to obtain feature attribute. A heuristic attribute reduction algorithm based on rough set＇s discernible matrix is proposed to identify and classify micro-targets. To avoid the complicated calibration for intrinsic parameters of camera, an improved Broyden＇s method is proposed to estimate the image Jacobian matrix which employs Chebyshev polynomial to construct a cost function to approximate the optimization value. Finally, a visual controller is designed for a robotic micromanipulation system. The experiment results of micro-parts assembly show that the proposed methods and algorithms are effective and feasible.

Learning-based force servoing control of a robot with vision in an unknown environment

A learning-based control approach is presented for force servoing of a robot with vision in an unknown environment. Firstly, mapping relationships between image features of the servoing object and the joint angles of the robot are derived and learned by a neural network. Secondly, a learning controller based on the neural network is designed for the robot to trace the object. Thirdly, a discrete time impedance control law is obtained for the force servoing of the robot, the on-line learning algorithms for three neural networks are developed to adjust the impedance parameters of the robot in the unknown environment. Lastly, wiping experiments are carried out by using a 6 DOF industrial robot with a CCD camera and a force/torque sensor in its end effector, and the experimental results confirm the effecti veness of the approach.

Visual Object Tracking and Servoing Control of a Nano-Scale Quadrotor:System,Algorithms,and Experiments

There are two main trends in the development of unmanned aerial vehicle(UAV)technologies:miniaturization and intellectualization,in which realizing object tracking capabilities for a nano-scale UAV is one of the most challenging problems.In this paper,we present a visual object tracking and servoing control system utilizing a tailor-made 38 g nano-scale quadrotor.A lightweight visual module is integrated to enable object tracking capabilities,and a micro positioning deck is mounted to provide accurate pose estimation.In order to be robust against object appearance variations,a novel object tracking algorithm,denoted by RMCTer,is proposed,which integrates a powerful short-term tracking module and an efficient long-term processing module.In particular,the long-term processing module can provide additional object information and modify the short-term tracking model in a timely manner.Furthermore,a positionbased visual servoing control method is proposed for the quadrotor,where an adaptive tracking controller is designed by leveraging backstepping and adaptive techniques.Stable and accurate object tracking is achieved even under disturbances.Experimental results are presented to demonstrate the high accuracy and stability of the whole tracking system.

Grasp Planning and Visual Servoing for an Outdoors Aerial Dual Manipulator

This paper describes a system for grasping known objects with unmanned aerial vehicles (UAVs) provided with dual manipulators using an RGB-D camera. Aerial manipulation remains a very challenging task. This paper covers three principal aspects for this task: object detection and pose estimation, grasp planning, and in-flight grasp execution. First, an artificial neural network (ANN) is used to obtain clues regarding the object’s position. Next, an alignment algorithm is used to obtain the object’s sixdimensional (6D) pose, which is filtered with an extended Kalman filter. A three-dimensional (3D) model of the object is then used to estimate an arranged list of good grasps for the aerial manipulator. The results from the detection algorithm—that is, the object’s pose—are used to update the trajectories of the arms toward the object. If the target poses are not reachable due to the UAV’s oscillations, the algorithm switches to the next feasible grasp. This paper introduces the overall methodology, and provides the experimental results of both simulation and real experiments for each module, in addition to a video showing the results.

CONTROL SCHEMES FOR CMAC NEURAL NETWORK-BASED VISUAL SERVOING

In IBVS (image based visual servoing), the error signal in image space should be transformed into the control signal in the input space quickly. To avoid the iterative adjustment and complicated inverse solution of image Jacobian, CMAC (cerebellar model articulation controller) neural network is inserted into visual servo control loop to implement the nonlinear mapping. Two control schemes are used. Simulation results on two schemes are provided, which show a better tracking precision and stability can be achieved using scheme 2.

Adaptive Stabilization for Uncertain Nonholonomic Dynamic Mobile Robots Based on Visual Servoing Feedback

nonholonomic 的稳定问题动态活动机器人与一修理(装天花板) 照相机在这份报纸被探讨。首先，一个照相机目标视觉 servoing 运动学的模型被利用针孔照相机模型介绍，一个运动学的稳定控制器为运动学的模型被给。然后，一个适应滑动模式控制器被设计面对与照相机系统联系的参量的无常稳定不明确的动态活动机器人。建议控制器不仅对象集体变化那样的结构化的无常而且到象骚乱那样的未组织的柔韧。建议控制系统的稳定性和估计的参数的固定被 Lyapunov 方法严厉地证明。模拟结果被介绍说明控制法律的表演。

SPATIAL TRAJECTORY PREDICTION OF VISUAL SERVOING

Target tracking is one typical application of visual servoing technology. It is still a difficult task to track high speed target with current visual servo system. The improvement of visual servoing scheme is strongly required. A position-based visual servo parallel system is presented for tracking target with high speed. A local Frenet frame is assigned to the sampling point of spatial trajectory. Position estimation is formed by the differential features of intrinsic geometry, and orientation estimation is formed by homogenous transformation. The time spent for searching and processing can be greatly reduced by shifting the window according to features location prediction. The simulation results have demonstrated the ability of the system to track spatial moving object.

Backstepping Sliding Mode Control Based on Extended State Observer for Hydraulic Servo System

Hydraulic servo system plays an important role in industrial fields due to the advantages of high response,small size-to-power ratio and large driving force.However,inherent nonlinear behaviors and modeling uncertainties are the main obstacles for hydraulic servo system to achieve high tracking perfor-mance.To deal with these difficulties,this paper presents a backstepping sliding mode controller to improve the dynamic tracking performance and anti-interfer-ence ability.For this purpose,the nonlinear dynamic model is firstly established,where the nonlinear behaviors and modeling uncertainties are lumped as one term.Then,the extended state observer is introduced to estimate the lumped distur-bance.The system stability is proved by using the Lyapunov stability theorem.Finally,comparative simulation and experimental are conducted on a hydraulic servo system platform to verify the efficiency of the proposed control scheme.

Robust visual servoing based Chinese calligraphy on a humanoid robot

A robust visual servoing system is investigated on a humanoid robot which grasps a brush in Chinese calligraphy task.The system is implemented based on uncalibrated visual servoing controller utilizing Kalman-Bucy filter,with the help of an object detector by continuously adaptive MeanShift(CAMShift) algorithm.Under this control scheme,a humanoid robot can satisfactorily grasp a brush without system modeling.The proposed method is shown to be robust and effective through a Chinese calligraphy task on a NAO robot.

Output feedback control and parameters influence analysis of active suspension electro-hydraulic servo actuator

The hydraulic servo actuator of heavy vehicle active suspension is investigated to clarify the correlation between system parameters and the control characteristics of active suspension hydraulic servo system.Accordingly, a nonlinear physical model of electro-hydraulic servo active suspension system is built.Compared with the conventional nonlinear modeling, the model in this study considers the asymmetry of working areas caused by single rod hydraulic cylinder in the suspension system.In accordance with the model, a nonlinear output feedback controller based on backstepping is designed, and the effectiveness of the controller is proved based on the experimental platform.The dynamic response curve of the electro-hydraulic servo control system under the change of parameters is generated based on the simulation model.The sensitivity of electro-hydraulic servo control performance to the change of system physical parameters is investigated, and two evaluation indexes are proposed to quantify and compare the effect of all physical parameter changes on position control system.As revealed by the results, the position control characteristics of suspension actuator are more sensitive to the changes of flow gain of the servo valve, system supply oil pressure and effective working areas of cylinder, and the two evaluation indexes are over 10 times higher than other physical parameters.

Path Planning of Planar Kinked Line Seam by Visual Servoing for Robotic Welding

Welding path planning can substitute for the manual teaching process of the robot and can promote the autonomous level of the robotic welding. A path planning method by visual servoing was presented, in which the optimal angle of charge-coupled device (CCD) camera was also planned. Aiming at planning two forms of kinked line seams, obtuse angle seam and right angle seam, a practicable solution was put forward. In this solution, the intersection of two adjacent straight segments is detected in each local seam image, and if intersection is found, the seam errors are calculated using the next straight segment. The experimental results show that kinked line seam can be well planned using this solution.

Uncalibrated visual servoing design for competitive networked robots

In this paper,a method with an eye-in-hand configuration is developed to hit targets during visual tracking for the TLS(Tele-Light Saber) game.It is not necessary to calibrate camera parameters and predict the trajectory of the moving object.Firstly,the expression of the image Jacobian matrix for the eye-in-hand configuration is proposed,and then an update law is designed to estimate the image Jacobian online.Furthermore,a control scheme is presented and the Lyapunov method is employed to prove asymptotic convergence of image errors.No assumption for the moving objects is needed.Finally,both simulation and experimental results are shown to support the approach in this paper.

Study on algorithm of dynamic uncalibrated eye-in-hand visual servoing system

Currently, most visual servoing system must be calibrated, while it is impossible to calibrate cameras and robot models precisely in industrial practice, so a novel dynamic uncalibrated eye-in-hand visual servoing system of tracking a moving target is proposed. The method does not require calibration of camera and robot kinematic models. Vision guided algorithm for tracking dynamic image is developed through minimizing nonlinear objective function. For the large residual has not been approximated in dynamic environment and the change of composite image Jacobian with time increment has not been computed in visual servoing system now,large residuals are dynamic approximated and the change of composite image Jacobian at each iterative step is computed. Simulation results demonstrate the validity of these approaches.

A Stable Switch Method Based on Fusion in Uncalibrated Visual Servoing

Stable switch control between multiple cameras for uncalibrated visual servoing was studied. Switch images based on fusion were presented to get the continuous dynamic image Jacobian matrix among robots and distributed visual sensors. The designed fusion algorithm is suitable to have dynamically adjustable fusion weights, and the fusion structure was analyzed. Simulations and experiments without any knowledge of mobile robots and uncalibrated visual sensors show that the method has higher adaptability than the traditional instant switch control method. The method can enhance the system stability at the switching process.

数控机床伺服系统参数设计数字孪生实验平台

为解决数控机床伺服系统参数设计相关实验,在真实机床上难开展、高耗材、安全风险大等问题,提出了一种“基于MCD+PLCSIMAdvanced+TIA架构的伺服系统参数设计数字孪生实验平台”设计方案。该方案将机床模型实体与数字孪生实验平台有机地结合起来,以“单轴伺服系统参数优化设计实验”为例,对数字孪生实验平台伺服系统的相关参数进行了调试与优化,并在机床模型实体上对其所得参数的准确性进行了验证,同时也证实了该数字孪生实验平台设计方案的可靠性。

基于刚度可调的气动位置伺服系统摩擦补偿控制

气动伺服系统的低刚度、低气源压强、流量易饱和等特性,导致系统在工作过程中能量耗散较大,系统易受摩擦影响,且补偿效果不明显。尤其是当系统的运动方向改变时,会产生明显的“平顶现象”,严重影响气动伺服系统的跟踪精度。采用负载口独立控制结构,消除因两腔耦合而导致的能量耗散,使系统流量特性尽可能地位于线性区间;针对气动系统中存在的摩擦中部分参数不确定,以及外界干扰、动态负载的不确定性,设计非线性自适应鲁棒控制方法;将系统的刚度调节与自适应鲁棒控制进行协同控制,提高气动位置伺服系统的动态性能。仿真和实验结果均表明:具有刚度调节的自适应鲁棒控制能够明显降低系统能量耗散,提高系统位置跟踪精度,有效改善摩擦引起的“平顶现象”。