A novel zeolite-coated fiber sensors for detection of volatile organic compounds （VOCs） based on the Fabry-Perot interferometer was proposed and demonstrated. The sensor comprised a polycrystalline silicalite thin f...A novel zeolite-coated fiber sensors for detection of volatile organic compounds （VOCs） based on the Fabry-Perot interferometer was proposed and demonstrated. The sensor comprised a polycrystalline silicalite thin film grown up on the cleaved end face of a standard single-mode fiber. The inline Fabry-Perot cavity was composed by the end face of the single-mode fiber and the thin film. The sensor device operated by measuring the interference signal, which was a function of the amount of chemical vapor adsorption in its crystalline micro porous structure. Experimental results showed that the proposed VOC sensor worked well and the sensitivities were 2.78×10^-3dB/ppm when the concentration ranged from 350ppm to 2100ppm and 1.23×10^-3 dB/ppm when the concentration ranged from 2100ppm to 5250 ppm.展开更多
A novel method was presented for synthesis of ZnO and ZnO-CuO composites in the form of nanowires, nanorods and nanoflakes on oxidized silicon substrates. Further, the use of the synthesized nanostructures for gas sen...A novel method was presented for synthesis of ZnO and ZnO-CuO composites in the form of nanowires, nanorods and nanoflakes on oxidized silicon substrates. Further, the use of the synthesized nanostructures for gas sensing was demonstrated. Pure brass （Cu0.65-Zn0.35） films were deposited on oxidized Si substrate by radio frequency （RF） diode sputtering. Subsequently, these films having thickness in the range of 100-200 nm were oxidized in different oxidizing ambient in the temperature range of 300-550 ℃. The effect of temperature, time and oxidizing ambient on the growth of nanostructures was investigated by scanning electron microscopy （SEM）, transmission electron microscopy （TEM）, X-ray diffraction （XRD） and photoluminescence （PL） techniques. The nanostructures surface was analyzed by X-ray photoelectron spectroscopy （XPS）. The synthesized nanowires had diameter in the range of 60-100 nm and length up to 50 μm. Based on these observations, the growth mechanism has been suggested. For the nanorods, the diameter was observed to be -150 nm. Samples having dense nanowires, nanorods and nanoflakes were used as a gas sensing material. The performance Of the sensor was investigated for different nanostructured materials for various volatile organic compounds （VOCs）, It was observed that ZnO- CuO nanoflakes were more sensitive to VOC sensing compared to ZnO nanowires and nanorods.展开更多
文摘A novel zeolite-coated fiber sensors for detection of volatile organic compounds （VOCs） based on the Fabry-Perot interferometer was proposed and demonstrated. The sensor comprised a polycrystalline silicalite thin film grown up on the cleaved end face of a standard single-mode fiber. The inline Fabry-Perot cavity was composed by the end face of the single-mode fiber and the thin film. The sensor device operated by measuring the interference signal, which was a function of the amount of chemical vapor adsorption in its crystalline micro porous structure. Experimental results showed that the proposed VOC sensor worked well and the sensitivities were 2.78×10^-3dB/ppm when the concentration ranged from 350ppm to 2100ppm and 1.23×10^-3 dB/ppm when the concentration ranged from 2100ppm to 5250 ppm.
基金National Agricultural Innovation Project(NAIP)Indian Council of Agricultural Research(ICAR)for their financial support under the project C10125(component-4)
文摘A novel method was presented for synthesis of ZnO and ZnO-CuO composites in the form of nanowires, nanorods and nanoflakes on oxidized silicon substrates. Further, the use of the synthesized nanostructures for gas sensing was demonstrated. Pure brass （Cu0.65-Zn0.35） films were deposited on oxidized Si substrate by radio frequency （RF） diode sputtering. Subsequently, these films having thickness in the range of 100-200 nm were oxidized in different oxidizing ambient in the temperature range of 300-550 ℃. The effect of temperature, time and oxidizing ambient on the growth of nanostructures was investigated by scanning electron microscopy （SEM）, transmission electron microscopy （TEM）, X-ray diffraction （XRD） and photoluminescence （PL） techniques. The nanostructures surface was analyzed by X-ray photoelectron spectroscopy （XPS）. The synthesized nanowires had diameter in the range of 60-100 nm and length up to 50 μm. Based on these observations, the growth mechanism has been suggested. For the nanorods, the diameter was observed to be -150 nm. Samples having dense nanowires, nanorods and nanoflakes were used as a gas sensing material. The performance Of the sensor was investigated for different nanostructured materials for various volatile organic compounds （VOCs）, It was observed that ZnO- CuO nanoflakes were more sensitive to VOC sensing compared to ZnO nanowires and nanorods.
