Volatile Organic Compounds (VOCs) in China: Progress and Prospects of Research on Treatment Technologies and Policy Provisions

Volatile organic compounds (VOCs) are an atmospheric pollutant with a boiling point of 50˚C - 260˚C at room temperature and pressure. They are precursors of sulfur dioxide and ozone, which can seriously pollute the atmosphere and endanger human health. After the “14th Five-Year Plan”, VOCs, instead of SO2, became one of the five indicators of China’s atmospheric governance. As a result, the government’s efforts to control VOCs have increased significantly. VOCs governance mustn’t be delayed. This paper provides a comprehensive summary and analysis of VOCs governance, covering the classification of VOCs, analysis of VOC governance technology (with a focus on end-of-pipe governance technology), national policy regulations, current governance shortcomings, and a forward-looking perspective on the future direction of VOCs governance, emphasizing healthy and sustainable development.

Modern approaches for detection of volatile organic compounds in metabolic studies focusing on pathogenic bacteria:Current state of the art

Pathogenic microorganisms produce numerous metabolites,including volatile organic compounds(VOCs).Monitoring these metabolites in biological matrices(e.g.,urine,blood,or breath)can reveal the presence of specific microorganisms,enabling the early diagnosis of infections and the timely implementation of tar-geted therapy.However,complex matrices only contain trace levels of VOCs,and their constituent com-ponents can hinder determination of these compounds.Therefore,modern analytical techniques enabling the non-invasive identification and precise quantification of microbial VOCs are needed.In this paper,we discuss bacterial VOC analysis under in vitro conditions,in animal models and disease diagnosis in humans,including techniques for offline and online analysis in clinical settings.We also consider the advantages and limitations of novel microextraction techniques used to prepare biological samples for VOC analysis,in addition to reviewing current clinical studies on bacterial volatilomes that address inter-species in-teractions,the kinetics of VOC metabolism,and species-and drug-resistance specificity.

Towards green asphalt materials with lower emission of volatile organic compounds: A review on the release characteristics and its emission reduction additives

Recently, researchers in the road field are focusing on the development of green asphalt materials with loweremission of volatile organic compounds (VOCs). The characterization methodology of asphalt VOCs and theinfluencing factors on VOCs release have always been the basic issue of asphalt VOCs emission reduction research.Researchers have proposed a variety of asphalt VOCs characterization methodologies, which also have mutuallyirreplaceable characteristics. Asphalt VOCs volatilization is affected by many factors. In this study, asphalt VOCscharacterization methodologies were summarized, including their advantages, disadvantages, characteristics andapplicable requirements. Subsequently, the influencing factors of VOCs release, such as asphalt types and environment conditions, are summarized to provide theoretical support for the emission reduction research. Theclassification and mechanism of newly-development asphalt VOCs emission reduction materials are reviewed. Thereduction efficiencies are also compared to select better materials and put forward the improvement objective ofnew materials and new processes. In addition, the prospects about development of VOCs release mechanism ofasphalt materials during the full life cycle and feasibility research of high-efficiency composite emission reductionmaterials in the future were put forward.

Cyclodextrin Polymer Films Optical Waveguide Sensor for Volatile Organic Gas Detection

A sensitive optical waveguide（OWG） sensor which can be used to detect volatile organic compounds（VOCs） was presented.The sensing device（element） was fabricated by means of the immobilization of polyvinyl pyrrolidone（PVP）-cyclodextrin（CD） composite film over a single-mode potassium ion exchanged glass OWG via spin-coating method.The sensor shows higher response to styrene gas than to other VOCs and displays a linear response to styrene gas in a range of 1―1000 μL/L.

Remove volatile organic compounds(VOCs) with membrane separation techniques

Membrane separation, a new technology for removing VOCs including pervaporation, vapor permeation, membrane contactor, and membrane bioreactor was presented. Comparing with traditional techniques, these special techniques are an efficient and energy saving technology. Vapor permeation can be applied to recovery of organic solvents from exhaust streams. Membrane contactor could be used for removing or recovering VOCs from air or wastewater. Pervaporation and vapor permeation are viable methods for removing VOCs from wastewater to yield a VOC concentrate which could either be destroyed by conventional means, or be recycled for reuse.

Gas sensitivity of polyaniline/SnO_2 hybrids to volatile organic compounds

Polyaniline (PAn) was prepared by chemical oxidation polymerization and characterized by FT-IR. PAn/SnO2 materials with different mass fractions of PAn were prepared by mechanical mixing. Compared with single PAn and SnO2, the gas sensitivity of PAn/SnO2 materials to volatile organic compounds (VOCs, methanol, ethanol and acetone) was studied. The possible response mechanism of PAn/SnO2 materials to VOCs was also discussed. It is found that PAn/SnO2 materials have gas sensitivity to VOCs at 90 ℃ among the four operating temperatures (room temperature, 30, 60 and 90 ℃), but PAn and SnO2 have no gas sensitivity at the above temperatures. The sensitivity of PAn/SnO2 materials shows linear increase with the increase of methanol concentration, but saturation with the increase of ethanol and acetone concentrations. PAn/SnO2 materials have high selectivity, fast response-recovery time and low operation temperature to VOCs, but pure PAn and SnO2 do not have.

Graphene Based Electrochemical Sensor for the Detection of Volatile Organic Compounds

Many household consumables contain volatile organic compounds(VOCs)as the active ingredient.Long term exposure to VOCs could cause various health problems,especially to the respiratory system.Graphene has attracted a lot of attention recently for its potential to be used as sensing material for VOCs.In this project we have constructed graphene/PVA composite based gas sensors for VOC detection.It was perceived that the polymer could introduce better selectivity to the sensor.Results suggest that the proposed sensor is highly sensitive to low molecular weight VOCs and that the manner in which the sensor respond to the vapour depends on the polarity or hydrophobicity of the vapour.

Measurement of in-vehicle volatile organic compounds under static conditions

The types and quantities of volatile organic compounds （VOCs） inside vehicles have been determined in one new vehicle and two old vehicles under static conditions using the Thermodesorber-Gas Chromatograph/Mass Spectrometer （TD-GC/MS）. Air sampling and analysis was conducted under the requirement of USEPA Method TO-17. A room-size, environment test chamber was utilized to provide stable and accurate control of the required environmental conditions （temperature, humidity, horizontal and vertical airflow velocity, and background VOCs concentration）. Static vehicle testing demonstrated that although the amount of total volatile organic compounds （TVOC） detected within each vehicle was relatively distinct （4940 μg/m^3 in the new vehicle A, 1240 μg/m^3 in used vehicle B, and 132 μg/m^3 in used vehicle C）, toluene, xylene, some aromatic compounds, and various C7-C12 alkanes were among the predominant VOC species in all three vehicles tested. In addition, tetramethyl succinonitrile, possibly derived from foam cushions was detected in vehicle B. The types and quantities of VOCs varied considerably according to various kinds of factors, such as, vehicle age, vehicle model, temperature, air exchange rate, and environment airflow velocity. For example, if the airflow velocity increases from 0.1 m/s to 0.7 m/s, the vehicle＇s air exchange rate increases from 0.15 h^-1 to 0.67 h^-1, and in-vehicle TVOC concentration decreases from 1780 to 1201 μg/m^3.

Emissions of volatile organic compounds from heated needles and twigs of Pinus pumila

A study was conducted to explore the mechanism that emissions of volatile organic compounds（VOC） from heated needles and twigs（200°C,within 15 min） of Pinus pumila affect fire behaviours using the technology of Thermal Desorption-Gas Chromatography-Mass Spectrometry（TD-GC-MS）.The results indicated that the main components of VOC from heated needles and twigs are terpenoids.Most of these terpenoids are monoterpenes.Terpenoids account for 72.93% for the needles and 92.40% for the twigs of the total VOC,and their emission ratios are 61.200 μg·g-1 and 217.060 μg·g-1 respectively.Heated twigs can emit more terpenoids than heated needles because twigs had more volatile oils than needles.In actual fires,these large amounts of terpenoid emissions,especially the monoterpene emissions,have strong effects on fire behaviors that are not only in the initial stage but also in the fast propagation stage of fires.These flammable gases are capable of causing violent combustion and creating crown fires.In addition,if these gases accumulate in an uneven geographical area,there will be a possible for eruptive fires and/or fires flashover to occur.

Analyzing Method on Biogenic Volatile Organic Compounds

In order to analyze biogenic volatile organic compounds in the atmosphere, an automated gas chromatography is developed and employed at the laboratory of National Center for Atmospheric Research (NCAR) during January to July, 2000. A small refrigerator was used so as to remove water in the air sample from gas line, and get accurate concentrations of volatile organic compounds. At 5°C, good water removing efficiency can be obtained at controlled flow rate. Air samples were collected around the building of Mesa Lab. of NCAR and analyzed by this gas chromatography system. This paper reports this gas chromatography system and results of air samples. The experimental results show that this gas chromatography system has a good reproducibility and stability, and main interesting volatile organic compounds such as isoprene, monoterpenes have an evident diurnal variation.

Differential volatile organic compounds in royal jelly associated with different nectar plants

The aim of this work was to distinguish volatile organic compound（VOC） profiles of royal jelly（RJ） from different nectar plants. Headspace solid-phase microextraction（HS-SPME） was used to extract VOCs from raw RJ harvested from 10 nectar plants in flowering seasons. Qualitative and semi-quantitative analysis of VOCs extracts were performed by gas chromatography-mass spectrometry（GC-MS）. Results showed that VOC profiles of RJ from the samples were rich in acid, ester and aldehyde compound classes, however, contents of them were differential, exemplified by the data from acetic acid, benzoic acid methyl ester, hexanoic acid and octanoic acid. As a conclusion, these four VOCs can be used for distinguishing RJ harvested in the seasons of different nectar plants.

Emissions of volatile organic compounds and carbonyl compounds from residential coal combustion in China

Emissions of volatile organic compounds （VOCs） and carbonyls from residential coal combustion of five coals with different maturities were studied in a simulated room.The coals were burned in form of honeycomb briquettes in a domestic coal stove,one of the most common fuel/stove combinations in China.Through a dilution system,VOCs and carbonyls samples were collected by canisters and silica-gel cartridges and analyzed by gas chromatography and mass spectrum （GC/MS） and high performance liquid chromatography/ultraviolet （HPLC/UV）,respectively.The results show that the bituminous coals with medium volatile matter content produce the highest emissions while the anthracite yields the lowest.Among the identified carbonyls from the coal smoke,the aromatic compounds （benzaldehyde,2,5-dimethylbenzaldehyde and p-tolualdehyde,m/o-tolualdehyde,benzene,m,p-xylene and trimethyl-benzene） were relatively abundant,which might be due to the molecular structure of the coal.For formaldehyde,aromatic carbonyls and aliphatic alkanes,their concentrations increase up to the maximum values and then decrease with increasing coal maturity.The total carbonyls and VOCs have the same tendency,which was observed for the emission factors of organic carbon （OC）,elemental carbon （EC）,particulate matter （PM） and polycyclic aromatic hydrocarbons （PAHs） detected in the series study.

Research on Preparation Method of Static Head Space for Volatile Organic Compounds in Drinking Water

[Objective] This research aimed to study the pre-treatment conditions of head space so as to establish a HS-GC determination method, which is suitable for China's conditions, for trace volatile organic compounds in drinking water. [Method]The preparation method of head space was adopted for the volatile organic compounds in drinking water. [Result] The 20 kinds of volatile organic compounds in drinking water all could be detected simultaneously by using HS-GC-FID method,and they all could be separated well. The HS-GC-FID method could analyze the detected substances qualitatively and quantitatively. In addition, this detection method was characterized by larger linear range of concentration, higher precision, higher detection limit and higher recovery rate. [Conclusion] Under certain conditions, HSGC can reduce the loss of volatile organic compound in drinking water and improve the sensitivity of detection. Moreover, the detection results meet the requirements by quality control.

Biomass Control via UV Lamp Application and Nutrient Supply Restriction in the Biofiltration of Gaseous VOCs

Biofiltration may have clogging problems owing to excess biomass growth during the treatment of gaseous pollutants.In this study,we employed an UV(Ultraviolet)lamp and controlled the nutrient supply to conduct a biofiltration process for treating 2-butanone(MEK:Methyl Ethyl Ketone)and toluene in a gas stream.Two methods of UV lamp usage(direct and indirect irradiation)and several nutrient supply methods were tested.However,no clear effect was observed with either UV usage.Under the optimal conditions,97%of the MEK and 69%of the toluene gases were removed after 29 s of EBRT(Empty Bed Retention Time).The inlet loads were 18 and 19 mg/(m^(3)·h)for MEK and toluene,respectively.Under these conditions,23 g-N/(m^(3)·day)of nitrate-nitrogen was consumed.Excess biomass growth occurred during simultaneous excess nutrient supply and a persistent irrigation schedule.In this study,we demonstrated the effective use of a dense nitrate solution to deliver an appropriate amount of nutrients and moisture,and the optimal irrigation frequency was four times per week.

Prediction of Henry Constants and Adsorption Mechanism of Volatile Organic Compounds on Multi-Walled Carbon Nanotubes by Using Support Vector Regression

Support vector regression （SVR） combined with particle swarm optimization for its parameter optimization is employed to establish a model for predicting the Henry constants of multi-walled carbon nanotubes （MWNTs） for adsorption of volatile organic compounds （VOCs）. The prediction performance of SVR is compared with those of the model of theoretical linear salvation energy relationship （TLSER）. By using leave-one-out cross validation of SVR test Henry constants for adsorption of 35 VOCs on MWNTs, the root mean square error is 0.080, the mean absolute percentage error is only 1.19~, and the correlation coefficient （R2） is as high as 0.997. Compared with the results of the TLSER model, it is shown that the estimated errors by SVR are ali smaller than those achieved by TLSER. It reveals that the generalization ability of SVR is superior to that of the TLSER model Meanwhile, multifactor analysis is adopted for investigation of the influences of each molecular structure descriptor on the Henry constants. According to the TLSER model, the adsorption mechanism of adsorption of carbon nanotubes of VOCs is mainly a result of van der Waals and interactions of hydrogen bonds. These can provide the theoretical support for the application of carbon nanotube adsorption of VOCs and can make up for the lack of experimental data.

Exhaled volatile organic compounds for diagnosis and monitoring of asthma

The asthmatic inflammatory process results in the generation of volatile organic compounds(VOCs),which are subsequently secreted by the airways.The study of these elements through gas chromatography-mass spectrometry(GC-MS),which can identify individual molecules with a discriminatory capacity of over 85%,and electronic-Nose(e-NOSE),which is able to perform a quick onboard pattern-recognition analysis of VOCs,has allowed new prospects for non-invasive analysis of the disease in an"omics"approach.In this review,we aim to collect and compare the progress made in VOCs analysis using the two methods and their instrumental characteristics.Studies have described the potential of GC-MS and e-NOSE in a multitude of relevant aspects of the disease in both children and adults,as well as differential diagnosis between asthma and other conditions such as wheezing,cystic fibrosis,COPD,allergic rhinitis and last but not least,the accuracy of these methods compared to other diagnostic tools such as lung function,FeNO and eosinophil count.Due to significant limitations of both methods,it is still necessary to improve and standardize techniques.Currently,e-NOSE appears to be the most promising aid in clinical practice,whereas GC-MS,as the gold standard for the structural analysis of molecules,remains an essential tool in terms of research for further studies on the pathophysiologic pathways of the asthmatic inflammatory process.In conclusion,the study of VOCs through GC-MS and e-NOSE appears to hold promise for the noninvasive diagnosis,assessment,and monitoring of asthma,as well as for further research studies on the disease.

Research Progress on the Monitoring of Precursor of Atmospheric Ozone——Volatile Organic Compounds

Volatile organic compounds(VOCs)are important precursors of ozone and PM_(2.5).At present,VOCs have gradually become the focus of air pollution control after fine particles in China,and a series of documents,standards and planning on VOCs were issued from the state to each area.The analysis on source apportionment and control of VOCs have also become a hot spot in atmospheric environmental protection research of China at present stage.The research work on VOCs in ambient air is the basis and premise of scientific and effective prevention and control of VOCs pollution.In this paper,research progress on the monitoring of VOCs is introduced systemically,and main monitoring and evaluation methods of atmospheric VOCs are explored from monitoring analysis method,chemical reaction activity and health risk assessment.Moreover,concentration characteristics and source apportionment of VOCs in the regions at home and abroad that have carried out VOCs research work are compared and summarized.The research could provide reference for source apportionment of VOCs in other cities of China.

Advanced Technologies for Volatile Organic Compound (VOC) Emission Treatment: An Overview

This paper presents a comprehensive overview of various advanced technologies employed in the treatment of volatile organic compounds(VOCs),which are crucial pollutants in industrial emissions.The study explores different methods,including direct combustion,thermal combustion,catalytic combustion,low-temperature plasma purification,photocatalytic purification,membrane separation,and adsorption methods.Each technology is critically analyzed for its operational principles,efficiency,and applicability under different conditions.Special attention is given to adsorption concentration and catalytic combustion parallel method,highlighting its efficiency in treating low-concentration,high-volume VOC emissions.The paper also delves into the advantages and limitations of each method,providing insights into their effectiveness in various industrial scenarios.The study aims to offer a detailed guide for selecting appropriate VOC treatment technologies,contributing to enhanced environmental protection and sustainable industrial practices.

Establishment and Evaluation of a Method for Analyzing Atmospheric Volatile Organic Compounds

An automated cumulative sampling system and a method that combines a two-step cryo-concentrated system and gas chromatography/mass spectrometry （CCS-GC/MS） are introduced. The method is evaluated by a set of special experiments and the results are presented. The lowest measurement detection limit was expanded from 10^-6 nmol mol^-1 to 10^-12 nmol mol^-1 by using CCS-GC/MS instead of the simpler method of gas chromatography/mass spectrometry （GC/MS）, with the average responsible factor of 39 object compounds being 2.9 × 10^-12. When the volume of air sample reached 1000 cm^3, the lowest detection limit reached up to 7 × 10^-12-40 × 10^-12 nmol mol^-1. The CCS-GC/MS method can potentially identify all objective chemical species in an atmospheric sample, with an average 2.5 s bias error of retention time for 39 gas chromatography （GC） peaks. Within the range 0-400×10^-9 nmol mol^-1, the concentration of 39 kinds of objective compounds can be individually calculated very accurately by a standard curve [average r^2 （coefficient of determination） value of above 0.99]. The recovery efficiency was 88%-111%, with an average of 100.8% ±5.6%. The bias error of precision was 2%-14%, with an average of 6.6%.

Gas sensing performance of polyaniline/ZnO organic-inorganic hybrids for detecting VOCs at low temperature

Polyaniline （PANI） was prepared by the chemical oxidative polymerization of aniline, and ZnO, with the mean particle size of 28 nm, was synthesized by a non-aqueous solvent method. The organic-inorganic PANI/ZnO hybrids with different mass fractions of PANI were obtained by mechanically mixing the prepared PANI and ZnO. The gas sensing properties of PANI/ZnO hybrids to different volatile organic compounds （VOCs） including methanol, ethanol and acetone were investigated at a low operating temperature of 90°C. Compared with the pure PANI and ZnO, the PANI/ZnO hybrids presented much higher response to VOCs. Meanwhile, the PANI/ZnO hybrid exhibited a good reversibility and a short response-recovery time, implying its potential application for gas sensors. The sensing mechanism was suggested to be related to the existence of p-n heterojunctions in the PANI/ZnO hybrids.