Study on the Fine Configuration of Reservoir in River Facies Oilfield in Bohai Sea Area

The geological conditions of offshore shallow water delta oil reservoirs were complex, with limited well data and large well spacing. Taking A Oilfield in the Bohai Sea Area, China as an example, the target sand body was formed in a shallow water delta sedimentary environment, with well-developed underwater distributary channels and frequent branching and diversion. The reservoir was strong non-uniformity and uneven plane water cut pressure. To this end, based on the existing work of predecessors, combined with seismic, logging, and production dynamics data, and based on the genesis mechanism of shallow water delta reservoirs, the boundary of composite river channels was identified through seismic facies, and logging facies were used to subdivide them into single river levels within the composite river channels. Then, seismic waveform characteristics were applied to track and characterize the plane distribution of single river channels, guiding the efficient development of offshore shallow water delta oil fields and achieving increased storage and production in Bohai Oilfield, China.

Impacts of Depositional Facies and Diagenesis on Reservoir Quality:A Case Study from the Rudist-bearing Sarvak Formation,Abadan Plain,SW Iran

An integrated geological-petrophysical analysis of the rudist-bearing sequence of the Cretaceous Sarvak Formation is given one giant oilfield,and provides an improved understanding of this main reservoir in the Abadan Plain,in the Zagros Basin,SW Iran.The main objective of this study is to evaluate reservoir potential of the Sarvak Formation,and then to utilize the calibrated well log signature to correlate reservoir potential in un-cored wells.Eight main facies are recognized and categorized in five facies groups:lagoon,shoal,rudist-biostrome,slope,and shallow open marine,deposited on a shelf carbonate platform.Given the distribution of diagenetic products and their effects on pore systems,three diagenetic facies namely,(DF-1)low dissolution and cementation;(DF-2);high dissolution;and(DF-3)high cementation are differentiated.The initial sedimentary characteristics in combination with distribution of diagenetic products play an important role in reservoir quality heterogeneity.The effect of diagenetic processes related to disconformities mainly depends on the facies nature below these surfaces.Grain-dominated facies of shoal and rudist debris,observed below the Cenomanian–Turonian disconformity,are mostly characterized by high dissolution and interconnected pore systems.Finally,depositional and diagenetic facies in the studied wells are correlated by petrophysical well log data,leading to distribution of the reservoir zones.Data obtained can be utilized for efficient reservoir characterization of the Sarvak Formation and its equivalent units in the Arabian Plate.

Evolutions of sedimentary facies and palaeoenvironment and their controls on the development of source rocks in continental margin basins:A case study from the Qiongdongnan Basin,South China Sea

Hydrocarbon resources in the Qiongdongnan Basin have become an important exploration target in China.However,the development of high-quality source rocks in this basin,especially in its deep-water areas,are still not fully understood.In this study,evolutions of sedimentary facies and palaeoenvironment and their influences on the development of source rocks in diverse tectonic regions of the Qiongdongnan Basin were investigated.The results show that during the Oligocene and to Miocene periods,the sedimentary environment of this basin progressively varied from a semi-closed gulf to an open marine environment,which resulted in significant differences in palaeoenvironmental conditions of the water column for various tectonic regions of the basin.In shallow-water areas,the palaeoproductivity and reducibility successively decrease,and the hydrodynamic intensity gradually increases for the water columns of the Yacheng,Lingshui,and Sanya-Meishan strata.In deep-water areas,the water column of the Yacheng and Lingshui strata has a higher palaeoproductivity and a weaker hydrodynamic intensity than that of the Sanya-Meishan strata,while the reducibility gradually increases for the water columns of the Yacheng,Lingshui,and Sanya-Meishan strata.In general,the palaeoenvironmental conditions of the water column are the most favorable to the development of the Yacheng organic-rich source rocks.Meanwhile,the Miocene marine source rocks in the deep-water areas of the Qiongdongnan Basin may also have a certain hydrocarbon potential.The differences in the development models of source rocks in various tectonic regions of continental margin basins should be fully evaluated in the exploration and development of hydrocarbons.

Epidemiological Facies of Human Rabies Deaths in Côte d’Ivoire from 2016 to 2022

Introduction: Rabies is a highly fatal viral disease outside the post-exposure prophylaxis (PEP). Data from previous studies and reports from the rabies center show that cases of death from human rabies are regularly reported, despite training measures for health workers, awareness-raising and communities, and the availability of vaccines. Objectives: The aim of this study was to analyse the determinants of human rabies deaths in Côte d’Ivoire from 2016 to 2022. Method: A retrospective cross-sectional qualitative study was carried out from January to August 2023 on all the records of patients who died of human rabies at the Treichville Rabies Center from 2016 to 2022. An analysis of the rabies center’s annual activity reports from 2016 to 2022 was also carried out in order to complete the information gathered from the files. Results: The socio-demographic characteristics showed that out of 148 deaths, children accounted for 47.97% (71) and 66.22% (98) of rabies deaths were male, with an M/F sex ratio of 1.96. In terms of clinical characteristics, in 97.30% (144) of cases, the deceased had presented with furious rabies, and analysis by the Pasteur Institute of Côte d’Ivoire laboratory confirmed 101 cases (92.66%) of human rabies. Geographical distribution showed that cases of human rabies were recorded in 56 health district, and 64% (94) of the deceased lived in rural areas. The main causes of the occurrence of rabies were essentially non-use of post-exposure prophylaxis (PEP) and missed vaccination due to ignorance. Conclusion: In view of these results, control strategies and interventions need to be adapted to the epidemiological characteristics of the disease, using a community-based approach with a view to eliminating dog-transmitted rabies by 2030.

Subaqueous volcanic eruptive facies,facies model and its reservoir significance in a continental lacustrine basin:A case from the Cretaceous in Chaganhua area of southern Songliao Basin,NE China

The conventional lithofacies and facies model of subaerial and marine pyroclastic rocks cannot reflect the characteristics of subaqueous volcanic edifice in lacustrine basins.In order to solve this problem,the lithofacies of subaqueous eruptive pyroclastic rocks is discussed and the facies model is established by taking the tuff cone of Cretaceous Huoshiling Formation in the Chaganhua area of the Changling fault depression,Songliao Basin as the research object.The results indicate that the subaqueous eruptive pyroclastic rocks in the Songliao Basin can be divided into two facies and four subfacies.The two facies are the subaqueous explosive facies and the volcanic sedimentary facies that is formed during the eruption interval.The subaqueous explosive facies can be further divided into three subfacies:gas-supported hot pyroclastic flow subfacies,water-laid density current subfacies and subaqueous fallout subfacies.The volcanic sedimentary facies consists of pyroclastic sedimentary rocks containing terrigenous clast subfacies.A typical facies model of the tuff cone that is formed by subaqueous eruptions in the Songliao Basin was established.The tuff cone is generally composed of multiple subaqueous eruption depositional units and can be divided into two facies associations:near-source facies association and far-source facies association.The complete vertical succession of one depositional unit of the near-source facies association is composed of pyroclastic sedimentary rocks containing terrigenous clast subfacies,gas-supported hot pyroclastic flow subfacies,water-laid density current subfacies and subaqueous fallout subfacies from bottom to top.The depositional unit of the far-source facies association is dominated by the subaqueous fallout subfacies and contains several thin interlayered deposits of the water-laid density current subfacies.The gas-supported hot pyroclastic flow subfacies and the pyroclastic sedimentary rocks containing terrigenous clast subfacies are favorable subaqueous eruptive facies for reservoirs in continental lacustrine basins.

Logging curves characteristics and response mechanisms of basaltic facies and sub-facies: A case study from eastern sag of Liaohe depression, Northeast China

Based on five types of conventional logging curves including GR,RLLD,CNL,DEN and AC,and 39 core samples from 30 representative boreholes,the logging characteristics and lithofacies and sub-facies of the basaltic rocks were studied.Three basaltic facies and four sub-facies are recognized from the well logs,includ-ing volcanic conduit facies(post intrusive sub-facies),explosive facies,and effusive lava flow facies(tabular flow,compound flow and hyaloclastite sub-facies).The post intrusive,tabular flow and compound flow sub-facies logging curves are mainly controlled by the distribution of vesiculate zones and vesiculate content,which are characterized by four curves with good correlation.Post intrusive sub-facies are characterized by high RLLD,high DEN,with a micro-dentate logging curve pattern,abrupt contact relationships at the top and base.Tabular flow sub-facies are characterized by high RLLD,high DEN,with a bell-shaped log curve pattern,abrupt contact at the base and gradational contact at the top.Compound flow sub-facies are characterized by medium-low RLLD,with a micro-dentate or finger-like logging curve pattern,abrupt contact at the base and gradational contact at the top.Explosive facies and hyaloclastite sub-facies logging curves are mainly controlled by the distribution of the size and sorting of rock particles,which can be recognized by four kinds of logging curves with poor cor-relation.Explosive facies are characterized by low RLLD,medium-low CNL and low DEN,with a micro-dentate logging curve pattern.Hyaloclastite sub-facies are characterized by low RLLD,high CNL,low DEN and high AC,with a micro-dentate logging curve pattern.The present research is beneficial for the prediction of basaltic reser-voirs not only in the Liaohe depression but also in the other volcanic-sedimentary basins.

Generating geologically realistic 3D reservoir facies models using deep learning of sedimentary architecture with generative adversarial networks

This paper proposes a novel approach for generating 3-dimensional complex geological facies models based on deep generative models.It can reproduce a wide range of conceptual geological models while possessing the flexibility necessary to honor constraints such as well data.Compared with existing geostatistics-based modeling methods,our approach produces realistic subsurface facies architecture in 3D using a state-of-the-art deep learning method called generative adversarial networks(GANs).GANs couple a generator with a discriminator,and each uses a deep convolutional neural network.The networks are trained in an adversarial manner until the generator can create "fake" images that the discriminator cannot distinguish from "real" images.We extend the original GAN approach to 3D geological modeling at the reservoir scale.The GANs are trained using a library of 3D facies models.Once the GANs have been trained,they can generate a variety of geologically realistic facies models constrained by well data interpretations.This geomodelling approach using GANs has been tested on models of both complex fluvial depositional systems and carbonate reservoirs that exhibit progradational and aggradational trends.The results demonstrate that this deep learning-driven modeling approach can capture more realistic facies architectures and associations than existing geostatistical modeling methods,which often fail to reproduce heterogeneous nonstationary sedimentary facies with apparent depositional trend.

Genetic Types of Meter-Scale Cyclic Sequences and Fabric Natures of Facies Succession

Different genetic types of meter-scale cyclic sequences in stratigraphic records result from episodic accumulation of strata related to Milankovitch cycles. The distinctive fabric natures of facies succession result from the sedimentation governed by different sediment sources and sedimentary dynamic conditions in different paleogeographical backgrounds, corresponding to high-frequency sea-level changes. Naturally, this is the fundamental criterion for the classification of genetic types of meter-scale cyclic sequences. The widespread development in stratigraphic records and the regular vertical stacking patterns in long-term sequences, the evolution characters of earth history and the genetic types reflected by specific fabric natures of facies successions in different paleogeographical settings, all that show meter-scale cyclic sequences are not only the elementary working units in stratigraphy and sedimentology, but also the replenishment and extension of parasequence of sequence stratigraphy. Two genetic kinds of facies succession for meter-scale cyclic sequence in neritic-facies strata of carbonate and clastic rocks, are normal grading succession mainly formed by tidal sedimentation and inverse grading succession chiefly made by wave sedimentation, and both of them constitute generally shallowing upward succession, the thickness of which ranges from several tens of centimeters to several meters. The classification of genetic types of meter-scale cyclic sequence could be made in terms of the fabric natures of facies succession, and carbonate meter-scale cyclic sequences could be divided into four types: L-M type, deep-water asymmetrical type, subtidal type and peritidal type. Clastic meter-scale cyclic sequences could be grouped into two types: tidal-dynamic type and wave-dynamic type. The boundaries of meter-scale cyclic sequences are marked by instantaneous punctuated surface formed by non-deposition resulting from high-frequency level changes, which include instantaneous exposed punctuated surface, drowned punctuated surface as well as their relative surface. The development of instantaneous punctuated surface used as the boundary of meter-scale cyclic sequence brings about the limitations of Walter’s Law on the explanation of facies distribution in time and space, and reaffirm the importance of Sander’s Rule on analysis of stratigraphic records. These non-continuous surface could be traced for long distance and some could be correlative within same basin range. The study of meter-scale cyclic sequences and their regularly vertical stacking patterns in long-term sequences indicate that the research into cyclicity of stratigraphic records is a useful way to get more regularity from stratigraphic records that are frequently complex as well as non-integrated.

Garnet-bearing Granulite Facies Rock Xenoliths from Late Mesozoic Volcaniclastic Breccia, Xinyang, Henan Province

This paper presents the primary results of petrologic,mineralogical and petrochemical studies of garnet beating granulite facies rock xenoliths from Xinyang, Henan Province. These xenoliths, which are found in a pipe of late Mesozoic volcaniclastic breccia, are of high density (3.13-3.30 g/cm3) and high seismic velocity (Vp = 7.04-7.31 km/s), being products of underplating of basaltic magmas and had experienced granulite facies metamorphism. The underplating and metamorphism took place before the eruption of the host rock. Petrographical studies and equilibrium T-P calculations show that these xenoliths were captured at a 49 km depth and experienced at least a 16 km uplift before they were captured. The dynamics of the uplift could be related to the continent-continent collision between the North China plate and the Yangtze plate during the Triassic.

Research on Diageneses of Cambrian Shoal Facies Carbonate Rocks in the Xiadong Area, Hubei Province

With continuous outcrops, developed shoal facies rocks, complete types of diagenesis and changeable diagenetic environments, Cambrian strata are well developed in the Xiadong area, Yichang, Hubei Province. Under the combined influence of numerous diageneses, secondary pores can be formed, which result in better reservoir properties of the rock strata.The Cambrian rocks in this area consist of mainly carbonate rocks and secondarily detrital rocks. The carbonate rocks are dominated by grainstones including wormkalk, calcirudite-calcarenite, oolitic limestone and oncolitic limestone. Graded bedding and cross bedding are well developed in the strata, which indicates that the formation environment is of a high-energy shoal facies.In this area, there has developed a sequence of stable Cambrian platform carbonate deposition. The evolution trend is as follows: open sea shelf facies? intertidal low-energy restricted sea facies? intertidal high-energy shoal facies? coastal shoal facies? evaporite tidal-flat facies.The diageneses that the strata have experienced mainly include dolomitization, dedolomitization and dissolution, which are constructive diageneses for the formation of secondary pores, such as intercrystal pores, intercrystal solution pores, gypsum mold pores and caverns of dolomite.The diagenetic facies intervals can be divided into the unitary and the compound ones, totalling 22 in the area.In the early atmospheric fresh-water diagenetic environment and the late epidiagenetic environment, Cambrian rocks, especially dolomite of the Middle and Upper Cambrian, experienced extensive and profound fresh water corrosion, forming pore intervals with a porosity ranging from 5% to 15%.

Sedimentary facies and depositional model of shallow water delta dominated by fluvial for Chang 8 oil-bearing group of Yanchang Formation in southwestern Ordos Basin,China

A systematic analysis of southwestern Ordos Basin's sedimentary characteristics,internal architectural element association styles and depositional model was illustrated through core statistics,well logging data and outcrop observations in Chang 8 oil-bearing group.This analysis indicates that shallow water delta sediments dominated by a fluvial system is the primary sedimentary system of the Chang 8 oil-bearing group of the Yanchang Formation in southwestern Ordos Basin.Four microfacies with fine grain sizes are identified: distributary channels,sheet sandstone,mouth bar and interdistributary fines.According to the sandbody's spatial distribution and internal architecture,two types of sandbody architectural element associations are identified: amalgamated distributary channels and thin-layer lobate sandstone.In this sedimentary system,net-like distributary channels at the delta with a narrow ribbon shape compose the skeleton of the sandbody that extends further into the delta front and shades into contiguous lobate distribution sheet sandstone in the distal delta front.The mouth bar is largely absent in this system.By analyzing the palaeogeomorphology,the palaeostructure background,sedimentary characteristics,sedimentary facies types and spatial distribution of sedimentary facies during the Chang 8 period,a distinctive depositional model of the Chang 8 shallow water fluvial-dominated delta was established,which primarily consists of straight multi-phase amalgamated distributary channels in the delta plain,net-like distributary channels frequently diverting and converging in the proximal delta front,sheet sandstones with dispersing contiguous lobate shapes in the distal delta front,and prodelta or shallow lake mudstones.

A Model of Hydrothermal Dolomite Reservoir Facies in Precambrian Dolomite, Central Sichuan Basin, SW China and its Geochemical Characteristics

Hydrothermal mineral assemblages and related hydrothermally enhanced fracturing are common in the Precambrian Dengying Formation of Central Sichuan Basin. Petrographic and geochemical analyses of core samples show that the hydrothermal dolomite reservoirs of Dengying Formation consist of four main types of pores in the reservoir facies. These include: 1) hydrothermal dissolution vug(or pore), 2) intercrystalline pore, 3) residual inter-breccia vug(or pore), and 4) enlarged dissolved-fracture. There are three different fabrics dolomite in hydrothermal dolomite reservoirs, namely, saddle dolomite, fine-medium dolomite and micritic dolomite. Micritic dolomite is the original lithology of host rock. Saddle dolomite with curved or irregular crystal faces was directly crystallized from hydrothermal fluids(average temperature 192°C). Fine-medium dolomites are the products of recrystallization of micritic dolomite, resulting in abnormal geochemical characteristics, such as slight depletion of δ^(18)O, significant enrichment of Mn-Fe and ^(87)Sr/^(86)Sr, and positive Eu anomaly. A model for the distribution of various hydrothermal dolomite reservoir facies is proposed here, which incorporates three fundamental geological controls: 1) extensional tectonics and tectono-hydrothermal events(i.e., the Xingkai Taphrogenesis of Late Sinian-Early Cambrian, and Emei Taphrogenesis of Late Permian), 2) hydrothermal fluid storage in clastic rocks with large thickness(e.g., Nanhua System of Chengjiang Formation and part of Doushantuo Formation), and 3) confining bed for hydrothermal fluids(such as, the shale in Qiongzhusi Formation). The supply of hydrothermal fluid is critical. Large basement-rooted faults and associated grid-like fracture system may function as the channels for upward migration of hydrothermal fluid flow. The intersection of the above-mentioned faults(including the conversion fault), especially transtensional sags above negative flower structures on wrench faults can serve as a key target for future hydrocarbon exploration.

Internal Facies Architecture and Evolution History of Changxing Mouth-Bar Complex in the Changjiang(Yangtze)Delta,China

River-mouth bar is a fundamental element to constitute a delta system, and its internal facies architectures are vital to reconstruct delta evolution history and study high-resolution sequence stratigraphy. Changxing Island is a representative mouth-bar complex in the modern Changjiang Delta. Its vertical stacked strata produced by delta progradation were first studied by detailed facies analysis of core CX03, and then a general facies architecture and evolution history of mouth-bar complexes in the modern Changjiang Delta were discussed through a comparative study of 5 different cores and historical charts. A progradational deltaic sequence has generally a similar internal facies architecture, composed of massive muddy deposits of prodelta and delta-front slope facies at the bottom, sand-dominated deposits of delta-front platform, inter-bar channel and mouth-bar facies at the middle, and heterolithic deposits of tidal flat and saltmarsh facies at the top. There is a significant time lag for the initial formation of channel-mouth bar systems between Chongming and Jiuduansha Islands. Compared with subtidal flats, sedimentation rates on intertidal flats were highly accelerated, potentially resulting from weakening wave and tidal strength over extensive intertidal flats and increasing human embankment activities in the last few centuries. These findings provide some new clues to understand modern and ancient mouth-bar evolution and resultant sequence strata in tide-dominated deltas.

High resolution facies architecture and digital outcrop modeling of the Sandakan formation sandstone reservoir, Borneo:Implications for reservoir characterization and flow simulation

Advances in photogrammetry have eased the acquisition of high-resolution digital information from outcrops, enabling faster, non-destructive data capturing and improved reservoir modeling. Geocellular models for flow dynamics with in the virtual outcrop in siliciclastic deposits at different sets of sandstone facies architecture remain, however, a challenge. Digital maps of bedding, lithological contrast, spatial-temporal variations of bedding and permeability characteristics make it more easy to understand flow tortuosity in a particular architecture. An ability to precisely model these properties can improve reservoir characterization and flow modeling at different scales. Here we demonstrate the construction of realistic 2 D sandstone facies based models for a pragmatic simulation of flow dynamics using a combination of digital point clouds dataset acquired from LiDAR and field investigation of the Sandakan Formation, Sabah, Borneo.Additionally, we present methods for enhancing the accuracy of outcrop digital datasets for producing high resolution flow simulation. A well-exposed outcrop from the Sandakan Formation, Sabah, northwest Borneo having a lateral extent of 750 m was chosen in order to implement our research approach. Sandstone facies and its connectivity are well constrained by outcrop observations, data from air-permeability measurements, bilinear interpolation of permeability, grid construction and water vector analysis for flow dynamics.These proportions were then enumerated in terms of static digital outcrop model(DOM) and facies model based on sandstone facies bedding characteristics. Flow simulation of water vector analysis through each of the four sandstone facies types show persistent spatial correlation of permeability that align with either cross-bedded orientation or straight with more dispersion high quality sandstone(porosity 21.25%-41.2%and permeability 1265.20-5986.25 mD) and moderate quality sandstone(porosity 10.44%-28.75% and permeability 21.44-1023.33 mD). Whereas, in more heterolithic sandstone(wavy-to flaser-bedded and bioturbated sandstone), lateral variations in permeability show spatially non-correlated patterns over centimeters to tens of meters with mostly of low quality sandstone(porosity 3.4%-12.31% and permeability < 1 mD to 3.21 mD). These variations reflect the lateral juxtaposition in flow dynamics. It has also been resulted that the vertical connectivity and heterogeneities in terms of flow are mostly pragmatic due to the interconnected sandstone rather than the quality of sandstone.

Correlation of Upper Devonian and Lower Carboniferous Depositional Sequences in Different Facies Belts on Southern Margin of Upper Yangtze Platform

Ｓｅｑｕｅｎｃｅｓｔｒａｔｉｇｒａｐｈｙｄｅａｌｓｗｉｔｈｔｈｅｃｙｃｌｉｃｉｔｙｉｎｓｅｄｉ－ｍｅｎｔａｒｙｒｏｃｋｓａｎｄｒｅｇａｒｄｓａｔｌｅａｓｔｓｏｍｅｏｆｔｈｅｃｙｃｌｉｃｉｔｙａｓｇｌｏｂａｌｉｎｅｘｔｅｎｔ．Ｉｎｆａｃｔ，ｓｅｄｉｍｅ...

Granulite-facies Middle-Lower Crustal Xenoliths from Nushan Alkali Basalt in Northeastern Anhui Province,China

Metamorphic xenoliths within the Nushan alkali basalt of northeastern Anhui (NEA),China ,are from the middle-lower crust.They could be divided into two end-members:basic and acid.Interme-diate xenoliths are scarcely found.Basic two-pyroxene granulites(pyriclasites) were formed at 720-810℃ and 7-8kb.Petrological and geochemical studies indicate that the primary magma of the protoliths of basic granulites was derived from the metasomatized upper mantle, while the pa-rental magma of the acid end-member was probably produced by partial melting of the basic rocks. The protoliths of charnockites and grey gneisses represent respectively the early and late crystallization products of the granitic magma.The Nushan granulites are much different in many aspects from the granulites exposed in the northern part of North China ,which implies the inhomogeneity regarding to the early evolution of the North China terranc.

Facies Architecture Model of the Shimentan Formation Pyroclastic Rocks in the Block-T Units, Xihu Sag, East China Sea Basin, and its Exploration Significance

A gas field consisting of volcanic reservoir rocks was discovered in the block-T units of the Xihu Sag,East China Sea Basin.The lithology of the volcanic rocks is dominated by tuff and reworked tuff.The lithofacies are dominated by base surge deposits of explosive facies.As the architecture model of volcanic facies is still uncertain,it has restricted the exploration and development of mineral resources in this area.Using core and cuttings data,the lithology,lithofacies,geochemistry as well as grain size characteristics of volcanic rocks were analyzed.Based on these analyses,the volcanic rocks in the well section are divided into three eruptive stages.The transport direction of each volcanic eruption is analyzed using crystal fragment size analysis.The facies architecture of the block-T units was established based on the reconstruction results of paleo-geomorphology.The results show that the drilling reveals proximal facies(PF)and distal facies(DF)of the volcanic edifices.However,the crater-near crater facies(CNCF)are not revealed.Compared with the reservoirs of the Songliao Basin,it is shown that the volcanic rocks in the Xihu Sag have good exploration potential;a favorable target area is the CNCF near the contemporaneous fault.

Facies Architecture of the Fluvial-Aeolian Buchan Formation (Upper Devonian) and Its Implications on Field Exploration: A Case Study from Ardmore Field, Central North Sea, UK

The Upper Devonian Buchan Formation in the Central North Sea is a typical terrestrial deposit and predominantly comprises fine to medium-grained sandstones with occasional conglomerates and mudstones. The Buchan Formation has been previously described as being made up mostly of braided fluvial sandstones;however, this study confirms the presence and significance of aeolian sandstones within this fluvial-dominated sequence. Facies architecture is investigated through analogue outcrop study, well log curves and numerical facies modelling, and the results show contrasting differences between fluvial and aeolian facies. The fluvial facies is composed of multiple superimposed and sand-dominated fining-upward cycles in the vertical direction, and laterally an individual cycle has a large width/thickness ratio but is smaller than the field scale. However, the high channel deposition proportion (CDP, average value = 72%) in fluvial-dominated intervals means that it is likely all the sand bodies are interconnected. Aeolian facies comprise superimposed dune and interdune depositions and can be laterally correlated over considerable distances (over 1 km). Although the aeolian sandstones are volumetrically minor (approx. 30%) within the whole Buchan Formation, they have very high porosity and permeability (14.1% - 28%, 27 - 5290 mD) and therefore are excellent potential reservoirs. The fluvial sandstones are significantly cemented by quartz overgrowth and dolomite and by comparison with the aeolian sandstones are poor reservoirs. Aeolian sandstones can be differentiated from fluvial sandstones using several features: pin-stripe lamentation, good sorting, high visible porosity, friable nature and lack of muddy or conglomeratic contents;these characteristics allow aeolian sandstones can be tentatively recognized by low gamma ray values, high sonic transit time and low density in uncored wells. The thin, laterally correlatable and permeable aeolian sandstones within the Buchan Formation are effective reservoirs and could form important exploration targets when the Devonian is targeted elsewhere in the North Sea.

Sequence Stratigraphy and Sedimentary Facies of Feixianguan Formation in the Kaijiang-Liangping Area of Sichuan Basin, China

The Feixianguan formation in the Kaijiang-Liangping basin has been the focus of extensive research on multiple aspects. Based on field survey, core observation, laboratory analysis and seismic data interpretation, the sequence stratigraphy and sedimentary facies of the Kaijiang-Liangping area are studied. Four sequence boundaries and three maximum flooding surfaces of the Feixianguan formation are detected in this area. Three third-order sequences are identified as first sequence (SQ1), the second sequence (SQ2), and the third sequence (SQ3) in which SQ1 corresponds to the member 1 of the Feixianguan formation, SQ2 corresponds to the member 2, and SQ3 corresponds to the member 3 and member 4. Member 1, 2, 3 and 4 are lithologic sections divided by predecessors. On the basis of this sequence division and their sedimentary marks, the facies of the Feixianguan formation can be divided into open platform and evaporate platform categories. The open platform is composed of three subfacies identified as platform bank or basin marginal bank, interbank, and platform basin. Thus, a sedimentary evolution model is established. According to the sedimentary and seismic characteristics of the Kaijiang-Liangping area, we determine that two oolitic bank models, the aggradation model and the progradation model, are developed in this area. The aggradation model is developed in the Longgang region, which includes the basin marginal bank as a favorable exploring zone. The progradation model is developed in the Jiulongshan and Longhui areas, besides the basin marginal bank, the favorable exploration zones also include the oolitic bank developing areas of the inner basin.

Innovations on Assembled Techniques of Geochemical Lithofacies and Their Applications in Basin Analysis and Exploration for Minerals in Basins

1 Introduction Research and development on assembled techniques of geochemical lithofacies is to be oriented,at the firstly,by technological issues or conundrum in methodology,and to be subsidiary directed by applications of theoretic basis in sedimentary basin analysis and explorations for minerals in the ore-hosting basin.However these are to be steered by integrated knowledge and cross-sectional study while they are focused on the core value and innovative technology.