Hydrogenated microcrystalline silicon(μc-Si:H)films were prepared on glass and silicon substrates by radio frequency magnetron sputtering at 100°C using a mixture of argon(Ar)and hydrogen(H2)gasses as precursor ...Hydrogenated microcrystalline silicon(μc-Si:H)films were prepared on glass and silicon substrates by radio frequency magnetron sputtering at 100°C using a mixture of argon(Ar)and hydrogen(H2)gasses as precursor gas.The effects of the ratio of hydrogen flow(H2/(Ar+H2)%)on the microstructure were evaluated.Results show that the microstructure,bonding structure,and surface morphology of theμc-Si:H films can be tailored based on the ratio of hydrogen flow.An amorphous to crystalline phase transition occurred when the ratio of hydrogen flow increased up to 50%.The crystallinity increased and tended to stabilize with the increase in ratio of hydrogen flow from 40%to 70%.The surface roughness of thin films increased,and total hydrogen content decreased as the ratio of hydrogen flow increased.Allμc-Si:H films have a preferred(111)orientation,independent of the ratio of hydrogen flow.And theμc-Si:H films had a dense structure,which shows their excellent resistance to post-oxidation.展开更多
源在外延片直径方向上的耗尽导致了外延片上局部各点的生长速率及掺杂浓度是个随位置变化的量,因此造成了外延片厚度及浓度的不均匀性。通过引入基座气浮旋转可以有效降低这种不均匀性,在典型工艺条件下,采用基座旋转,76.2 mm 4H-SiC外...源在外延片直径方向上的耗尽导致了外延片上局部各点的生长速率及掺杂浓度是个随位置变化的量,因此造成了外延片厚度及浓度的不均匀性。通过引入基座气浮旋转可以有效降低这种不均匀性,在典型工艺条件下,采用基座旋转,76.2 mm 4H-SiC外延片厚度不均匀性、p型掺杂浓度不均匀性和n型掺杂不均匀性分别为0.21%、1.13%和6.96%。基座旋转并不能完全消除外延片n型掺杂浓度不均匀性。优化主氢流量及C/Si比能够改变掺杂源的耗尽曲线,将76.2 mm SiC外延片n型掺浓度不均匀性优化至2.096%(σ/mean)。展开更多
基金Projects(51505050,51805063) supported by the National Natural Science Foundation of China for Young ScholarsProjects(KJ1500942,KJQN201801134) supported by the Scientific and Technological Research Program of Chongqing Education Commission of ChinaProjects(cstc2017jcyjAX0075,cstc2015jcyj A50033) supported by the Chongqing Research Program of Basic Research and Frontier Technology,China
文摘Hydrogenated microcrystalline silicon(μc-Si:H)films were prepared on glass and silicon substrates by radio frequency magnetron sputtering at 100°C using a mixture of argon(Ar)and hydrogen(H2)gasses as precursor gas.The effects of the ratio of hydrogen flow(H2/(Ar+H2)%)on the microstructure were evaluated.Results show that the microstructure,bonding structure,and surface morphology of theμc-Si:H films can be tailored based on the ratio of hydrogen flow.An amorphous to crystalline phase transition occurred when the ratio of hydrogen flow increased up to 50%.The crystallinity increased and tended to stabilize with the increase in ratio of hydrogen flow from 40%to 70%.The surface roughness of thin films increased,and total hydrogen content decreased as the ratio of hydrogen flow increased.Allμc-Si:H films have a preferred(111)orientation,independent of the ratio of hydrogen flow.And theμc-Si:H films had a dense structure,which shows their excellent resistance to post-oxidation.
文摘源在外延片直径方向上的耗尽导致了外延片上局部各点的生长速率及掺杂浓度是个随位置变化的量,因此造成了外延片厚度及浓度的不均匀性。通过引入基座气浮旋转可以有效降低这种不均匀性,在典型工艺条件下,采用基座旋转,76.2 mm 4H-SiC外延片厚度不均匀性、p型掺杂浓度不均匀性和n型掺杂不均匀性分别为0.21%、1.13%和6.96%。基座旋转并不能完全消除外延片n型掺杂浓度不均匀性。优化主氢流量及C/Si比能够改变掺杂源的耗尽曲线,将76.2 mm SiC外延片n型掺浓度不均匀性优化至2.096%(σ/mean)。
