COMPUTATIONAL AND EXPERI-MENTAL STUDY ON TIP LEAKAGE VORTEX OF CIRCUMFERENTIAL SKEWED BLADES

In the steady operation condition, the experiments and the numerical simulations are used to investigate the tip leakage flow fields in three low pressure axial flow fans with three kinds of circumferential skewed rotors, including the radial rotor, the forward-skewed rotor and the back- ward-skewed rotor. The three-dimensional viscous flow fields of the fans are computed. In the experiments, the two-dimensional plane particle image velocimetry （PIV） system is used to measure the flow fields in the tip region of three different pitchwise positions of each fan. The results show that the computational results agree well with the experimental data in the flow field of the tip region of each fan. The tip leakage vortex core segments based on method of the eigenmode analysis can display clearly some characteristics of the tip leakage vortex, such as the origination position of tip leak- age vortex, the development of vortex strength, and so on. Compared with the radial rotor, the other two skewed rotors can increase the stability of the tip leakage vortex and the increment in the forward-skewed rotor is more than that in the backward-skewed one. Among the tip leakage vortices of the three rotors, the velocity of the vortex in the forward-skewed rotor is th6 highest in the circumferential direction and the lowest in the axial direction.

Using a pressure controlled vortex design method to control secondary flow losses in a turbine stage

A turbine design method based on pressure controlled vortex design （PCVD） is presented to design a small-size turbine stage. Contrary to the conventional controlled vortex design （CVD） method, the main objective of PCVD is to control the axial velocity and radial pressure in the sta- tor rotor gap. Through controlling axial velocity, the PCVD establishes a direct tie to meridional stream surface. Thus stream surface variation is induced, resulting in a large secondary flow vortex covering the full blade passage in the respective stator and rotor. This secondary flow vortex could be dedicated to control the secondary flow mitigation and migration. Through radial pressure, the PCVD is also associated with the macroscopic driving force of fluid motion. So the better benefit of CVD can be achieved. The core concept behind PCVD is to mainly control the spanwise pressure gradient by altering profile loading at various spanwise locations. Therefore not only the local pro- file lift is affected, but also the resulting throat widths, stage reaction degree, and massflow rate are altered or redistributed respectively. With the PCVD method, the global stage efficiency is increased successfully while the mass flow rate keeps constant. Additionally there is no endwall shape optimization, stacking optimization, or pitch/chord variations, concentrating solely on varying blade profile deflections and stagger.

Two-phase sink vortex suction mechanism and penetration dynamic characteristics in ladle teeming process

At the late stage of continuous casting（CC）ladle teeming,sink vortex can suck the liquid slag into tundish,and cause negative influences on the cleanliness of molten steel.To address this issue,a twophase fluid mechanical modeling method for ladle teeming was proposed.Firstly,a dynamic model for vortex suction process was built,and the profiles of vortex flow field were acquired.Then,based on the level set method（LSM）,a two-phase 3Dinterface coupling model for slag entrapment was built.Finally,in combination with high-order essentially non-oscillatory（ENO）and total variation diminishing（TVD）methods,a LSM-based numerical solution method was proposed to obtain the 3Dcoupling evolution regularities in vortex suction process.Numerical results show that the vortex with higher kinetic energy can form an expanded sandglass-shape region with larger slag fraction and lower rotating velocity;there is a pressure oscillation phenomenon at the vortex penetration state,which is caused by the energy shock of two-phase vortex penetration coupling.