Investigation on the Effect of the Tension Degree of Tracks on the Adsorption Performance of Tracked Wall Climbing Robot

In this paper,a new tracked wall climbing robot with permanent magnetic units is designed,and the tension degree of robot’s tracks is found to have a significant impact on the robot’s adsorption performance.This tracked wall climbing robot is a remotely controlled robot.All the control devices can be installed on the robot body.All the permanent magnetic units are arranged on the light track.In order to illustrate the relationship between the tension degree and the adsorption performance,when absorbed on the vertical surface and 180⁃degree inverted surface,the static force analysis of the robot is presented.Finally,experiments were demonstrated to prove that higher tension degree of tracks can make adsorption performance better.

The Kinematics and Force Analysis of a New Leg Mechanism for Multi-legged Wall-Climbing Robot

This paper presents a new kind of leg mechanism with which the wall climbing robot can easily perform the ground to wall transition by itself.To get its walking envelope and limit position,the forward/inverse kinematics and the statics of the mechanism are solved.All of these lay the foundation for ground to wall transition gait programing,mechanism parameter selection and optimization.

Critical Suction Characteristic Analyses of a Wall Climbing Robot

A new method called critical suction is used based on the wall climbing robot demands of miniature structure, moving smartly and low noise. It makes the robot achieve the homeostasis state in the suction cup, and in this condition the robot can stay on the wall reliably and move smartly. The fluid mechanics model and fluid network model are set up to analyze the robot suction system when the airflow is steady or changes suddenly. Furthermore, simulation results indicate the close relation between the key parameters of robot structure and the suction system. Finally the method of critical suction proves correct in theory.

Research on adsorption mechanism of wall climbing robots based on internally balanced theory

The internally balanced theory proposed by the Japanese researchers,solved the contradiction between adsorption ability and moving capability of the permanent magnetic adsorption mechanism.However,it still has some problems when applied to wall climbing robots.This paper analyzes and improves this theory,and the improved internally balanced theory satisfies the requirements of the adsorption mechanism significantly.Finally,a practical prototype is proposed based on this method,and both the analysis using ANSYS and the experiment results justify the design validity.

Design and motion control analysis of double helix wall climbing robot

For the detection environment of complex walls such as high-rise buildings,a double helix wall climbing robot(DHWCR)with strong adsorption force and good stability is designed and developed,which uses symmetrical propellers to provide adsorption force.The symmetrical driving structure can provide smooth thrust for the DHWCR,so that the robot can be absorbed to the wall surface with different roughness.A left and right control frame with multiple degrees of freedom is designed,which can adjust the fixed position of the brushless propeller motor in the front and back directions,realize the continuous adjustable thrust direction of the robot,and improve the flexibility of the robot movement.Using the front wheel steering mechanism with universal joint,the steering control of the DHWCR is realized by differential control.In the vertical to ground transition,the front and rear brushless motors can provide the pull up and oblique thrust,so that the DHWCR can smoothly transition to the vertical wall.The motion performance and adaptability of the DHWCR in the horizontal ground and vertical wall environment are tested.The results show that the DHWCR can switch motion between the horizontal ground and vertical wall,and can stably adsorb on the vertical wall with flexible attitude control.The DHWCR can move at a fast speed.The speed on the horizontal ground is higher than that on the vertical wall,which verifies the feasibility and reliability of the DHWCR moving stably on the vertical wall.

Fast Control of Negative Pressure Response of a Bio-inspired Suction Cup Actuated by Shape Memory Alloy

A bio-inspired suction cup actuated by shape memory alloy(SMA)for miniature wall climbing robots is developed based on studying characteristics of biological suction apparatus.Some fast control strategies are introduced to improve negative pressure response.Theoretic model of the suction cup is built,and simulation and experiments results indicate the effectiveness of the fast control strategies.The largest negative pressure of the suction cup can reach 14 000 Pa,and its generating and cancelling just need 5 s.Research results indicate the suction cup can be used as an adhesion mechanism for miniature wall climbing robots.