With the continuous development of domestic highway construction,highway civil engineering and service level quality have attracted much attention.Good pavement quality and high-quality service make people feel comfor...With the continuous development of domestic highway construction,highway civil engineering and service level quality have attracted much attention.Good pavement quality and high-quality service make people feel comfortable and smooth when traveling.High-quality pavement can significantly reduce the probability of traffic accidents.At present,there is a direct relationship between pavement quality and pavement construction operations.Carrying out pavement construction operations in cold high-altitude areas requires a reasonable selection of construction equipment and methods.The application of warm-mix asphalt pavement construction technology can ensure pavement quality.Therefore,this paper analyzes the advantages of warm-mix technology,the environmental characteristics of cold high-altitude areas,and construction preparations,and discusses the construction technology of warm-mix asphalt pavement in cold high-altitude areas in detail,to improve the overall road quality of cold high-altitude areas.展开更多
The fatigue behavior, indirect tensile strength (ITS) and resilient modulus test results for warm mix asphalt (WMA) as well as hot mix asphalt (HMA) at different ageing levels were evaluated. Laboratory-prepared sampl...The fatigue behavior, indirect tensile strength (ITS) and resilient modulus test results for warm mix asphalt (WMA) as well as hot mix asphalt (HMA) at different ageing levels were evaluated. Laboratory-prepared samples were aged artificially in the oven to simulate short-term and long term ageing in accordance with AASHTO R30 and then compared with unaged specimens. Beam fatigue testing was performed using beam specimens at 25℃ based on AASHTO T321 standard. Fatigue life, bending stiffness and dissipated energy for both unaged and aged mixtures were calculated using four-point beam fatigue test results. Three-point bending tests were performed using semi-circular bend (SCB) specimens at -10℃ and the critical mode I stress intensity factor K I was then calculated using the peak load obtained from the load-displacement curve. It is observed that Sasobit and Rheofalt warm mix asphalt additives have a significant effect on indirect tensile strength, resilient modulus, fatigue behavior and stress intensity factor of aged and unaged mixtures.展开更多
This paper presents results from investigating the ageing behaviour and performance of different warm mix asphalt (WMA) pavement mixtures also called energy reduced pavements. The mixtures were either prepared in th...This paper presents results from investigating the ageing behaviour and performance of different warm mix asphalt (WMA) pavement mixtures also called energy reduced pavements. The mixtures were either prepared in the laboratory or taken directly from a mixing plant. The study compared the rutting and fatigue behaviours of unaged material in comparison to long term laboratory aged material. In order to conduct the long term ageing, a special laboratory ageing protocol with different heating, cooling and watering cycles had been developed. The investigation revealed a quite controversial rutting behavior which could not be explained with the available data. While most aged energy reduced pavements showed increased rutting for other mixtures, lower rut depths could be found. As opposed to this finding, fatigue and stiffness of all aged energy reduced pave- ment samples compared to unaged samples improved significantly. The overall results led to the conclusion that the ageing of energy reduced pavement simulated in the laboratory is not very critical regarding their mechanical performance. Therefore, it was confrmed that the application of this type of pavement provides a good solution for saving on CO2 emissions. Another advantage is that by using energy reduced pavements the road con- struction season can be significantly prolonged.展开更多
Warm mix asphalt (WMA} is a new technology which asphalt mix is produced and placed at normal temperature. It has advantages including low cost, environmentally friendly, haul-convenience, and so on. WMA has been wid...Warm mix asphalt (WMA} is a new technology which asphalt mix is produced and placed at normal temperature. It has advantages including low cost, environmentally friendly, haul-convenience, and so on. WMA has been widely tested and applied in the USA in the last decade, but it has just started in China. Recently, a new WMA using a new plastic- macromolecule-normal temperature additive, which was called "SMC" by the production company, was introduced as asphalt modifier. Based on discussing the strength forming process of this new WMA with SMC, a series of laboratory tests, including Marshall stability test (MST), boiling test (BT), modified immersion Marshall test (MIMT), freeze-thaw split- ring test (FTST), rutting test (RT), low-temperature bending test (LTBT), and abrasion loss test (ALT), were conducted in this study to assess the performance of this WMA and the capability of applying it on low volume roads in China. SMC modified asphalt mixed under normal temperature is used in testing samples. It was found that this WMA product exhibited merits on its strength, which was about 6.7 kN bigger than the requirement of 5.0 kN in the JTG F40-2004, on high-temperature stability, which is about 1100 times/ram greater than the requirement of 600-1000 times/mm in the )TG F40-2004, and on its storage stability. Based on these indicators, it is recommended that this product could be used for low volume low class roads construction. However, due to the relatively lower water resistance and low-temperature cracking resistance, this product is suggested to be applied first in the areas with warm weather and little rainfall. In order to improve the perfor- mance of this WMA with SMC, further research on this SMC asphalt modifier should be continued.展开更多
Within the past two decades or so, the asphalt paving industry has responded positively to increasing global concerns over shrinking natural resource reserves and worsening environmental conditions through the develop...Within the past two decades or so, the asphalt paving industry has responded positively to increasing global concerns over shrinking natural resource reserves and worsening environmental conditions through the development and deployment of warm-mix asphalt technologies. Such technologies make it possible to produce and place asphalt concrete at reduced temperatures compared to conventional hot-mix methods. Several studies have reported on the potential of warm-mix asphalt with regard to improved pavement performance, efficiency and environmental stewardship. This paper reviews several of those studies in the context of pavement sustainability. Overall, warm-mix asphalt provides substantial sustainability benefits similar to or, in some cases, better than conventional hot-mix asphalt. Sustainability benefits include lower energy use, reduced emissions, and potential for increased reclaimed asphalt pavement usage. Growth in utilization of warm-mix asphalt worldwide may, in the not-too-distant future, make the material the standard for asphalt paving. Regardless, there are concerns over some aspects of warm-mix asphalt such as lower resistance to fatigue cracking, rutting and potential water-susceptibility problems, particularly with mixes prepared with water-based technologies, which require further research to address.展开更多
文摘With the continuous development of domestic highway construction,highway civil engineering and service level quality have attracted much attention.Good pavement quality and high-quality service make people feel comfortable and smooth when traveling.High-quality pavement can significantly reduce the probability of traffic accidents.At present,there is a direct relationship between pavement quality and pavement construction operations.Carrying out pavement construction operations in cold high-altitude areas requires a reasonable selection of construction equipment and methods.The application of warm-mix asphalt pavement construction technology can ensure pavement quality.Therefore,this paper analyzes the advantages of warm-mix technology,the environmental characteristics of cold high-altitude areas,and construction preparations,and discusses the construction technology of warm-mix asphalt pavement in cold high-altitude areas in detail,to improve the overall road quality of cold high-altitude areas.
文摘The fatigue behavior, indirect tensile strength (ITS) and resilient modulus test results for warm mix asphalt (WMA) as well as hot mix asphalt (HMA) at different ageing levels were evaluated. Laboratory-prepared samples were aged artificially in the oven to simulate short-term and long term ageing in accordance with AASHTO R30 and then compared with unaged specimens. Beam fatigue testing was performed using beam specimens at 25℃ based on AASHTO T321 standard. Fatigue life, bending stiffness and dissipated energy for both unaged and aged mixtures were calculated using four-point beam fatigue test results. Three-point bending tests were performed using semi-circular bend (SCB) specimens at -10℃ and the critical mode I stress intensity factor K I was then calculated using the peak load obtained from the load-displacement curve. It is observed that Sasobit and Rheofalt warm mix asphalt additives have a significant effect on indirect tensile strength, resilient modulus, fatigue behavior and stress intensity factor of aged and unaged mixtures.
文摘This paper presents results from investigating the ageing behaviour and performance of different warm mix asphalt (WMA) pavement mixtures also called energy reduced pavements. The mixtures were either prepared in the laboratory or taken directly from a mixing plant. The study compared the rutting and fatigue behaviours of unaged material in comparison to long term laboratory aged material. In order to conduct the long term ageing, a special laboratory ageing protocol with different heating, cooling and watering cycles had been developed. The investigation revealed a quite controversial rutting behavior which could not be explained with the available data. While most aged energy reduced pavements showed increased rutting for other mixtures, lower rut depths could be found. As opposed to this finding, fatigue and stiffness of all aged energy reduced pave- ment samples compared to unaged samples improved significantly. The overall results led to the conclusion that the ageing of energy reduced pavement simulated in the laboratory is not very critical regarding their mechanical performance. Therefore, it was confrmed that the application of this type of pavement provides a good solution for saving on CO2 emissions. Another advantage is that by using energy reduced pavements the road con- struction season can be significantly prolonged.
基金the financial support of National Natural Science Foundation of China(51378438)National 973 Program(2013CB036204)specific research funding from Ministry of Education(SWJTU12ZT05)
文摘Warm mix asphalt (WMA} is a new technology which asphalt mix is produced and placed at normal temperature. It has advantages including low cost, environmentally friendly, haul-convenience, and so on. WMA has been widely tested and applied in the USA in the last decade, but it has just started in China. Recently, a new WMA using a new plastic- macromolecule-normal temperature additive, which was called "SMC" by the production company, was introduced as asphalt modifier. Based on discussing the strength forming process of this new WMA with SMC, a series of laboratory tests, including Marshall stability test (MST), boiling test (BT), modified immersion Marshall test (MIMT), freeze-thaw split- ring test (FTST), rutting test (RT), low-temperature bending test (LTBT), and abrasion loss test (ALT), were conducted in this study to assess the performance of this WMA and the capability of applying it on low volume roads in China. SMC modified asphalt mixed under normal temperature is used in testing samples. It was found that this WMA product exhibited merits on its strength, which was about 6.7 kN bigger than the requirement of 5.0 kN in the JTG F40-2004, on high-temperature stability, which is about 1100 times/ram greater than the requirement of 600-1000 times/mm in the )TG F40-2004, and on its storage stability. Based on these indicators, it is recommended that this product could be used for low volume low class roads construction. However, due to the relatively lower water resistance and low-temperature cracking resistance, this product is suggested to be applied first in the areas with warm weather and little rainfall. In order to improve the perfor- mance of this WMA with SMC, further research on this SMC asphalt modifier should be continued.
文摘Within the past two decades or so, the asphalt paving industry has responded positively to increasing global concerns over shrinking natural resource reserves and worsening environmental conditions through the development and deployment of warm-mix asphalt technologies. Such technologies make it possible to produce and place asphalt concrete at reduced temperatures compared to conventional hot-mix methods. Several studies have reported on the potential of warm-mix asphalt with regard to improved pavement performance, efficiency and environmental stewardship. This paper reviews several of those studies in the context of pavement sustainability. Overall, warm-mix asphalt provides substantial sustainability benefits similar to or, in some cases, better than conventional hot-mix asphalt. Sustainability benefits include lower energy use, reduced emissions, and potential for increased reclaimed asphalt pavement usage. Growth in utilization of warm-mix asphalt worldwide may, in the not-too-distant future, make the material the standard for asphalt paving. Regardless, there are concerns over some aspects of warm-mix asphalt such as lower resistance to fatigue cracking, rutting and potential water-susceptibility problems, particularly with mixes prepared with water-based technologies, which require further research to address.