The conversion of waste tire pyrolysis oil(WTPO)into S-doped porous carbon nanorods(labeled as WPCNs)with hierarchical pore structure is realized by a simple template-directed approach.The specific surface area of as-...The conversion of waste tire pyrolysis oil(WTPO)into S-doped porous carbon nanorods(labeled as WPCNs)with hierarchical pore structure is realized by a simple template-directed approach.The specific surface area of as-obtained porous carbon nanorods can reach up to 1448 m^(2) g^(−1) without the addition of any activating agent.As the capacitive electrode,WPCNs possess the extraordinary compatibility to capacitance,different electrolyte systems as well as long-term cycle life even at a commercial-level areal mass loading(10 mg cm^(−2)).Besides,only an extremely small capacitance fluctuation is observed under the extreme circumstance(−40 to 80℃),reflecting the excellent high-and low-temperature performance.The relationship between the pore structure and capacitive behavior is analyzed by comparing WPCNs with mesopores-dominated asphalt-derived porous carbon nanorods(APCNs)and micropores-dominated activated carbon.The molecular dynamics simulation further reveals the ion diffusion and transfer ability of the as-prepared carbon materials under different pore size distribution.The total ion flow(NT)of WPCNs calculated by the simulation is obviously larger than APCNs and the N_(T) ratio between them is similar with the experimental average capacitance ratio.Furthermore,this work also provides a valuable strategy to prepare the electrode material with high capacitive energy storage ability through the high value-added utilization of WTPO.展开更多
采用稀土氧化物改性NaY型分子筛(Ⅰ型催化剂),100 gⅠ型催化剂中添加0.5 g CeO2得到Ⅱ型催化剂,100 gⅠ型催化剂中添加0.5 g La2O3和0.5 g CeO2得到Ⅲ型催化剂。分别采用Ⅰ型、Ⅱ型和Ⅲ型催化剂催化热解废轮胎(粒径0.2 mm),Ⅱ型和Ⅲ型...采用稀土氧化物改性NaY型分子筛(Ⅰ型催化剂),100 gⅠ型催化剂中添加0.5 g CeO2得到Ⅱ型催化剂,100 gⅠ型催化剂中添加0.5 g La2O3和0.5 g CeO2得到Ⅲ型催化剂。分别采用Ⅰ型、Ⅱ型和Ⅲ型催化剂催化热解废轮胎(粒径0.2 mm),Ⅱ型和Ⅲ型催化剂的产油起始温度和终止温度均低于Ⅰ型催化剂。在催化剂加入量为2.5 g、废轮胎加入量为100 g的条件下,Ⅲ型催化剂催化热解反应的产油率和油气总产率均高于Ⅰ型和Ⅱ型催化剂。Ⅱ型和Ⅲ型催化剂催化热解主要产生轻组分气体,Ⅱ型催化剂C4选择性最高,Ⅲ型催化剂C3选择性最高。展开更多
基金supported by the National Key Research and Development Program of China(No.2018YFC1902603).
文摘The conversion of waste tire pyrolysis oil(WTPO)into S-doped porous carbon nanorods(labeled as WPCNs)with hierarchical pore structure is realized by a simple template-directed approach.The specific surface area of as-obtained porous carbon nanorods can reach up to 1448 m^(2) g^(−1) without the addition of any activating agent.As the capacitive electrode,WPCNs possess the extraordinary compatibility to capacitance,different electrolyte systems as well as long-term cycle life even at a commercial-level areal mass loading(10 mg cm^(−2)).Besides,only an extremely small capacitance fluctuation is observed under the extreme circumstance(−40 to 80℃),reflecting the excellent high-and low-temperature performance.The relationship between the pore structure and capacitive behavior is analyzed by comparing WPCNs with mesopores-dominated asphalt-derived porous carbon nanorods(APCNs)and micropores-dominated activated carbon.The molecular dynamics simulation further reveals the ion diffusion and transfer ability of the as-prepared carbon materials under different pore size distribution.The total ion flow(NT)of WPCNs calculated by the simulation is obviously larger than APCNs and the N_(T) ratio between them is similar with the experimental average capacitance ratio.Furthermore,this work also provides a valuable strategy to prepare the electrode material with high capacitive energy storage ability through the high value-added utilization of WTPO.
文摘采用稀土氧化物改性NaY型分子筛(Ⅰ型催化剂),100 gⅠ型催化剂中添加0.5 g CeO2得到Ⅱ型催化剂,100 gⅠ型催化剂中添加0.5 g La2O3和0.5 g CeO2得到Ⅲ型催化剂。分别采用Ⅰ型、Ⅱ型和Ⅲ型催化剂催化热解废轮胎(粒径0.2 mm),Ⅱ型和Ⅲ型催化剂的产油起始温度和终止温度均低于Ⅰ型催化剂。在催化剂加入量为2.5 g、废轮胎加入量为100 g的条件下,Ⅲ型催化剂催化热解反应的产油率和油气总产率均高于Ⅰ型和Ⅱ型催化剂。Ⅱ型和Ⅲ型催化剂催化热解主要产生轻组分气体,Ⅱ型催化剂C4选择性最高,Ⅲ型催化剂C3选择性最高。
