Efficient and rapid capture of uranium(Ⅵ) in wastewater via multiamine modified β-cyclodextrin porous polymer

It is quite important to ensure the safety and sustainable development of nuclear energy for the treatment of radioactive wastewater. To treat radioactive wastewater efficiently and rapidly, two multi-amine β-cyclodextrin polymers(diethylenetriamine β-cyclodextrin polymer(DETA-TFCDP) and triethylenetetramine β-cyclodextrin polymer(TETA-TFCDP)) were prepared and applied to capture uranium. Results exhibited that DETA-TFCDP and TETA-TFCDP displayed the advantages of high adsorption amounts(612.2and 628.2 mg·g-1, respectively) and rapid adsorption rates, which can reach(88 ± 1)% of their equilibrium adsorption amounts in 10 min. Moreover, the adsorbent processes of DETA-TFCDP and TETATFCDP on uranium(Ⅵ) followed the Langmuir model and pseudo-second-order model, stating they were mainly chemisorption and self-endothermic. Besides, TETA-TFCDP also showed excellent selectivity in the presence of seven competing cations and could be effectively reused five times via Na2CO3as the desorption reagent. Meanwhile, X-ray photoelectron spectroscopy and Fourier transform infrared spectroscopy illustrated that the enriched multi-amine groups and oxygen-containing functional groups on the surface of TETA-TFCDP were the main active sites for capturing uranium(Ⅵ). Hence, multi-amine β-cyclodextrin polymers are a highly efficient, rapid, and promising adsorbent for capturing uranium(Ⅵ)from radioactive wastewater.

STUDY AND SIMULATION OF AN ACTIVATED SLUDGE TREATMENT FOR METHYL VIOLET WASTE WATER

This paper researched a promising biological treatment of methyl violet waste water by methods of activated sludge.Effects of temperature and pH were studied on this process.Kinetic equation of the substrate biodegradation was investigated in the experimental range.It was studied and simulated that flow within the bubble region of this bioreactor according to the κ ε two fluid equation.Simulation results agree well with experimental data.

Study on the Genetic and Physiological Toxicity of Wastewater from a Pharmaceutical Factory Using Root Tip Micronucleus Technology of Vicia faba

ObjectiveThe aim was to assess genetic and physiological toxicity of wastewater from a pharmaceutical factory using root tip micronucleus technology of Vicia faba. MethodThe pollution of wastewater from a pharmaceutical factory was detected by using root tip micronucleus technology of Vicia faba, and the genetic and physiological toxicity of the wastewater to Vicia faba was assessed. ResultNon-processed wastewater had an extremely high level of biological toxicity; the cells were unable to live with the wastewater at a high concentration; the cells were able to grow with the wastewater at a low concentration, though the micronucleus ratio was extremely high. The processed wastewater had no significant impact on cell growth, but the micronucleus ratio was extremely high, showing that the processed water also had a high pollution index. ConclusionThe research could provide scientific references for the national treatment of wastewater from a pharmaceutical factory.

Phase equilibria for the pseudo-ternary system(NaCl+Na2SO4+H2O)of coal gasification wastewater at T=(268.15 to 373.15)K

The pseudo-ternary system(Na Cl + Na_2SO_4+ H_2O) of coal gasification wastewater was studied at T =(268.15 to 373.15) K. The solubility and density of the equilibrium liquid phase were determined by the isothermal solution saturation method. The equilibrium solids were also investigated by the Schreinemaker's method of wet residues and X-ray powder diffraction(XRD). According to the experimental data, the phase diagrams were determined. It was found that there was no significant solubility difference on the Na Cl-rich side between the ternary system(Na Cl + Na_2SO_4+ H_2O) in coal gasification wastewater and in pure water. However, the solubility on the Na_2SO_4-rich side of coal gasification wastewater was apparently higher than that of pure water. The increase in the solubility of Na_2SO_4 was most likely caused by the effects of other impurities apart from Na Cl and Na_2SO_4 in coal gasification wastewater. The measured data and phase equilibrium diagrams can provide fundamental basis for salt recovery in coal gasification wastewater.

Experimental Study of Wastewater Treatment of Reactive Dye by Phys-Chemistry Method

Wastewater, which involves easy-soluble reactive dyes, especially non-degradable dyes, is very difficult to decolor efficiently by normal processes such as coagulation process and biological treatment. The high chromaticity se- riously hinders the reuse of reactive dye waste water. In this paper, a new method by bentonite adsorption and coagulation (PAC) is employed for removing color from synthetic dye waste water which contains reactive red K-2G, K-RN blue, K-GR blue, X-3B red, K-GN orange, KB-3G yellow, K-2BP red, K-RN yellow and K-6G yellow. Bentonite pre- treated by 4% CTMAB and milled to 160 order screen is proven to the best decoloring agent. For a 100 mL reactive red K-2G sample (CODcr 400 mg/L, 25 000 chromaticity color), 0.5 g bentonite pretreated and 2.5 mL PAC is enough to decolor wastewater up to 99.92% and the sediment time is short. Non-degradable dyes such as active red X-3B and K-GN orange are declored completely as well. Raw sewage (low chromaticity color) is decolored completely at a ben-tonite dosage of 0.001g. More researches prove the high practical value of this process.

Researches on the Treatment of Phosphorous Wastewater with Oyster Shells

Based on the analysis of adsorptive features of oyster shells,the researches on the treatment of phosphorous wastewater with oyster shells and the effect of temperature on phosphorus removal were carried out.XRD was used to characterize the crystalline phases,and the main component of oyster shells was shown to be CaCO3.When the pretreatment temperature reached 800 ℃,some CaCO3 decomposed into CaO.As the temperature was further raised,CaO increased gradually.Via SEM testing,the oyster shell was a kind of natural porous materials.The pore wall partially collapsed from 550 to 900 ℃.No obvious porous structure was found at 900 ℃.However,without preheating,the oyster shell phosphorous removal material can not adsorb the phosphorus.Pretreatment made calcium activate,thus greatly increasing the absorption of phosphorus.

Recovery of Caprolactam from Waste Water in Caprolactam Production Using Pulsed-sieve-plate Extraction Column

Recovery of caprolactam from waste water of caprolactam production factory was investigated using benzene as solvent in a small-scale pulsed-sieve-plate column. First, liquid-liquid equilibrium (LLE) data were measured, including water-caprolactam-benzene system at low caprolactam concentrations, and waste water-benzene system. Then, the operating regions and mass transfer of the pulsed-sieve-plate column were measured. Finally, the overall apparent heights of a transfer unit based on continuous phase are correlated in terms of the column operation variables.

Adsorption of oil from waste water by coal:characteristics and mechanism

The work described here was focused on exploring the potential application of coal to purification of oily waste water.Coal was added to oily waste water as an adsorbent and then removed through a flotation process.This allowed economical and highly efficient separation of oil from the waste water.The absorption time,coal type,coal particle size distribution,pH value and oil concentration were investigated.The results indicate that oil absorption by a coal increases for a period of 1.5 h and then gradually tends toward an equilibrium value.It appears that the absorption capacity of anthracite is more than that of lean coal or lignite,given the same coal particle size distribution.The absorption capacity of a coarse coal fraction is less than that of finer coal,given the same of coal type.The absorption capacity of anthracite decreases slightly as the pH increases from 4 to 9.The adsorption of oil on anthracite follows the Freundlich isothermal adsorption law:given initial oil concentrations of 160.5 or 1023.6 mg/L the absorption capacity was 23.8 or 840.0 mg/g.The absorption mechanism consists of two kinds of absorption,a physical process assisted by a chemical one.

Synthesis of waterborne polyurethane-humic acid cross-linked biomass porous materials for the adsorption of methylene blue

A series of adsorbent materials(WPU-HAx-y)with a three-dimensional porous structure,green sustainability,and excellent performance were prepared and evaluated for the removal of methylene blue using nontoxic and environmentally friendly waterborne polyurethane as the matrix material and humic acid,a biomass material,as the functional material.The newly synthesized adsorbents were characterized by infrared spectroscopy,scanning electron microscopy,specific surface area,and thermogravimetric.The effects of contact time(0-8 h),starting concentration(10-100 mg·L^(-1)),pH(3-11),solution temperature(30-60℃),and coexisting ions(Ca2+,Na+,K+,Mg2+)on the performance were investigated.Pseudo-first-order,pseudo-second-order,elovich,and intra-particle diffusion models were used to analyze the adsorption kinetics;the Langmuir,Freundlich,Temkin,and Dubin-Radushkovich adsorption isotherms were evaluated;and the adsorption behavior of the adsorbent materials was found to be more appropriate for the pseudo-second-order model for chemical pollutant removal than the Langmuir model,which depends on monolayer adsorption.WPU-HA2-3 stood out with a maximum adsorption capacity of 813.0081 mg·g^(-1) fitted to the pseudo-second-order and 309.2832 mg·g^(-1) fitted to the Langmuir model,showing superior adsorption performance and regenerability.

The addition of microbes for treating textile wastewater

Some strains and culture of bacteria which are able to decolorize dyes and degrade polyvinyl alcohol(PVA) were isolated and selected. A pilot scale facultative anaerobic-aerobic biological process was applied for treatment of textile wastewater containing dyes and PVA. Activated carbon adsorption was used as a tertiary treatment stage, and residual sludge from clarifier returned to the anaerobic reactor again. The pilot test were carried out with two systems. One was inoculated by acclimated sludge, and the another was adding the mixed culture of dye-decoloring and PVA-degrading bacteria for forming biological films, the latter was observed to be more effective than the former. The test has run normally for ten months with a COD loading of 2.13 kg/m3/day, a BOD5 loading of 0.34 kg/m3/day in anaerobic reactor; a COD loading of 1.71 kg/m3/day, a BOD5 loading 0.44 kg/m3/day in aerobic reactor. The pollutants removal efficiency by adding microbes was about 20% higher than that by acclimated sludge. The average removal efficiency of COD stood about 92%, BOD5 97%, PVA 90% and decolorization 80%. The other parameters of effluent quality are also satisfactory.

THE INVESTIGATION ON PHOTOCATALYTIC TREATMENT OF WASTE WATER CONTAINING PHENOL OVER ZnO

This paper adopts a medium pressure mercury lamp as light source and ZnO powder as catalyst to investigate the effect of radioactive wave length, component of phenol ZnO suspension and stirring method on phenol decomposition rate. The optimized conditions for the phenol decomposition are: (1) Radioactive wave length: 360～420 nm; (2)Phenol concentration in the suspension is less than 200 mg/l; (3)ZnO concentration is 3～8 g/l; (4)pH value is 5～7; (5)Reaction temperature is 25℃～40℃; (6)Agitation at atmosphere. Phenol can decompose in two ways: (1)Reacting with photogenerated cavity; (2)Reacting with ·OH radical.

Bioaugmentation of two-stage aerobic sequencing batch reactor with mixed strains for high nitrate nitrogen wastewater treatment

Mixed strains Delftia sp.YH01 and Acidovorax sp.YH02,with capability of heterotrophic nitrification-aerobic denitrification,were introduced into a two-stage aerobic sequencing batch reactor to enhance NO3^--N removal.With optimal C/N of 8,efficient NO3^--N removal was achieved at initial NO3^--N concentration of 2000 mg·L−1.Meanwhile,the massive accumulation of NO2^--N was avoided during the long operation.Compared to the one-stage aerobic sequencing batch reactor,the removal efficiency of NO3^--N and TN in the two-stage aerobic sequencing batch reactor was increased by 36.5% and 42.7%,which respectively was 93.8% and 88.4%.Microbial community study showed that the mixed strains have the stronger viability and can synergistically denitrify with the indigenous microorganisms in system,such as Azoarcus,Uncultured Saprospiraceae,Thauera,Paracocccus,which could be major contributors for aerobic denitrification.The proposed technology was shown to achieve high-efficiency treatment of high NO3^--N wastewater through aerobic denitrification.

Structure Characterization and Dephosphorization Effect Analysis of Oyster Shell-silica Micropowder Waste Water Dephosphorization Materials

In this work,the effects of pH value of waste water and initial concentration of phosphorus on dephosphorization materials were investigated.The materials were prepared by shaping,sintering and hydrothermal reshaping oyster shell and silica micro-powder.Different concentrations of phosphorus-contained waste water were simulated with potassium dihydrogen phosphate solution,the effect of dephosphorization was tested with phosphomolybdenum blue spectrophotometer method,and the crystal phase and microstructure of materials were characterized by XRD and SEM methods. It was indicated that dephosphorization was completed in 6 h when the initial phosphorus concentration in waste water was lower than 15 mg/L, and the dephosphorization time prolonged as the increase of phosphorus concentration. It was observed that the pH value of waste water influenced dephosphorization significantly, and neutral subalkalic environment favored dephosphorization. When the pH value was 11, the efficiency of dephosphozation was the greatest. For waste water with an initial concentration of 20 mg/L, the dephosphozation rate is close to 100% in8 h.

An Integrated Planning for Rense and Wetland Strategyof Waste Water from Rural Enterprises: A Case Stndy

A waste water reuse engineering was designed and then operated in Hongshan, a small town in ZhejiangProvince, China, in order to solve pollution and shortage of water resources due to the development of ruralenterprises. The results showed that series-structure design and cycling model were two effective modes ofsaving water and decreasing pollutants into environment, and wetland strategy should be a component partof the integrated planning for waste water reuse of rural enterprises. This case study could provide a basisfor the optimum utilization and pollution avoidance of water resources.

Fouling characteristics of 90° elbow in high salinity wastewater from coal chemical industry

Due to the high salt content of coal chemical wastewater,pipeline fouling often occurs during wastewater treatment.Fouling will cause the diameter of the pipe to shrink or even block,which is not conducive to the safe and stable operation of the wastewater treatment process.In this paper,the experimental device was designed by using FLUENT software and the fouling deposition mechanisms at different flow velocities and different positions in a 90 deg bend were studied.The experimental results show that when the flow velocity is between 0.2 m·s^(-1) and 0.3 m·s^(-1),the thickness of fouling layer was positively correlated with the flow velocity;when the flow velocity is equal to 0.4 m·s^(-1),the formation of fouling is the most serious;when the flow velocity is between 0.4 m·s^(-1) and 0.7 m·s^(-1),the thickness of fouling layer was negative correlation with the flow velocity;with the increase of inlet velocity,the time for sediment point to develop into sediment surface is shortened.The fouling layer is easy to fall off because of the large shear force on the wall surface of the inner bend of the 90°elbow,so the density of sediment at this position is high.

Test of membrane bioreactor for waste water treatment of a petrochemical complex

Membrane bioreactor (MBR) used in water and waste water treatment is a developing technique for water pollution control and water reuse. This paper described a membrane bioreactor for treatment of waste water in a petrochemical complex. The experimental MBR was a lab scale one composed of an activated sludge bioreactor unit and an ultrafiltration membrane unit. The relationship of COD removal with MLSS and HRT in this MBR was studied. The effects of crossflow velocity, backwash interval and volume of flush liquid on the flux were discussed. The results showed that average removal of COD, oil, SS and turbidity in petrochemical waste water by the MBR was 91%, 86%, 92% and 99%, respectively. The average removal of NH 3 N and total phosphorous was 85% and 82% respectively. A coefficient of COD removal, k , was 0017—0080 L/(mg.d). The membrane flux maintained higher than 60 L/hm 2 bar for 34 days without chemical cleaning when the velocity of crossflow was 35—39 m/s and the backwash interval was 30 minutes and backwash duration at 20 seconds. The results indicated that it is feasible for MBR technology to be used in petrochemical waste water treatment. The treated water could be considered as a source of to make up water for industrial cooling system or to be reused for other purposes.

Abatement of waste gases and water during the processes of semiconductor fabrication

The purpose of this article is to examine the methods and equipment for abating waste gases and water produced during the manufacture of semiconductor materials and devices. Three separating methods and equipment are used to control three different groups of electronic wastes. The first group includes arsine and phosphine emitted during the processes of semiconductor materials manufacture. The abatement procedure for this group of pollutants consists of adding iodates, cupric and manganese salts to a multiple shower tower (MST) structure. The second group includes pollutants containing arsenic, phosphorus, HF, HCl, NO 2, and SO 3 emitted during the manufacture of semiconductor materials and devices. The abatement procedure involves mixing oxidants and bases in an oval column with a separator in the middle. The third group consists of the ions of As, P and heavy metals contained in the waste water. The abatement procedure includes adding CaCO 3 and ferric salts in a flocculation sedimentation compact device equipment. Test results showed that all waste gases and water after the abatement procedures presented in this article passed the discharge standards set by the State Environmental Protection Administration of China.

Energy,exergy,economic and environmental comprehensive analysis and multi-objective optimization of a sustainable zero liquid discharge integrated process for fixed-bed coal gasification wastewater

For a long time,China's regional water resource imbalance has restricted the development of coal chemical industry,and it is imperative to achieve zero liquid discharge(ZLD).Therefore,the game relationship between technical indicators,costs and emissions in ZLD process of fixed-bed coal gasification wastewater treatment process should be explored in detail.According to the accurate model,the simulation for ZLD of fixed-bed coal gasification wastewater treatment process is established,and this process is assessed from the perspective of thermodynamics,economy,and environment.The total energy consumption of ZLD process before optimization is 4.032×10^(8)W.The results of exergy analysis show exergy destruction of ZLD process is 94.55%.For economic and environmental results,the total annual cost is 1.892×10^(7)USD·a^(-1)and the total environmental impact is 4.782×10^(-8).The total energy consumption of the optimal six-step ZLD process based on multi-objective optimization is 4.028×10^(8)W.The CO_(2)content in the treated wastewater is 0.1%.This study will have an important role in promoting the establishment of the ZLD process for coal chemistry industry.

Troubleshooting and Optimization of High-Strength Inhibitory Chemical Wastewater Treatment Process

Wastewaters from the chemical industry are usually of high-strength and may contain minor inhibitory and recalcitrant organics that are at times not readily identifiable. This paper describes the experience of a biological waste water treatment plant （WWTP） processing a COD concentration of 43000 mg·L^-1 wastewater from an oxochemical manufacturing plant. Stage improvements of the plant process by dilution of the inhibitory influent using other chemical wastewater streams resulting in a synergistic process effect, and removal of inhibitory organics by phase separation via acidification, effectively achieved process optimization producing a high quality effluent. In particular, the COD removal efficiency of granular sludge based anaerobic reactors increased from 56% to 90%. The final effluent COD decreased from 250mg·L^-1 to 50mg·L^-1, consistently meeting the COD concentration of 100 mg·L^-1 regulatory discharge limit. The success of the process enhancements supports the hypothesis that long-chain quaternary carboxylic acids act as substrate inhibitors in the biological process.

A Case Study on the Utilization of Wind Energy Potential on Remote and Isolated Small Wastewater Plants

Small WWTP （wastewater treatment plants） are frequently located, by necessity, in remote and isolated sites, which increases the difficulty of its energy supply. This paper describes a case study which is a step by step procedure concerning the evaluation of the wind potential of sites that are dependent of in-situ energy generation, as well as, on the utilization of the potential wind energy in Magoito WWTP. The adopted methodology comprised the collection of one year of in-situ wind data and its validation by comparison with historical data of more than 10 years of a nearby anemometric station. The data provided by the two anemometric stations was statistically treated and allowed the analysis of the results from the two stations. These results are promising in terms of wind availability and velocity. Finally, the study comprised the simulation of the local wind conditions for a considerable larger area in order to find the best site for locating a wind turbine.