Upcycling of phosphogypsum waste for efficient zinc-ion batteries

Zinc metal is a promising anode material for next-generation aqueous batteries,but its practical application is limited by the formation of zinc dendrite.To prevent zinc dendrite growth,various Zn^(2+)-conducting but water-isolating solid-electrolyte interphase(SEI)films have been developed,however,the required high-purity chemical materials are extremely expensive.In this work,phosphogypsum(PG),an industrial byproduct produced from the phosphoric acid industry,is employed as a multifunctional protective layer to navigate uniform zinc deposition.Theoretical and experimental results demonstrate that PG-derived CaSO_(4)2H_(2)O can act as an artificial SEI layer to provide fast channels for Zn^(2+)transport.Moreover,CaSO_(4)2H_(2)O could release calcium ions(Ca^(2+))due to its relatively high Kspvalue,which have a higher binding energy than that of Zn^(2+)on the Zn surface,thus preferentially adsorbing to the tips of the protuberances to force zinc ions to nucleate at inert region.As a result,the Zn@PG anode achieves a high Coulombic efficiency of 99.5%during 500 cycles and long-time stability over 1000 hours at 1 m A cm^(-2).Our findings will not only construct a low-cost artificial SEI film for practical metal batteries,but also achieve a high-value utilization of phosphogypsum waste.

Recent progress and perspective on batteries made from nuclear waste

Sustainable energy sources are an immediate need to cope with the imminent issue of climate change the world is facing today.In particular,the long-lasting miniatured power sources that can supply energy continually to power handheld gadgets,sensors,electronic devices,unmanned airborne vehicles in space and extreme mining are some of the examples where this is an acute need.It is known from basic physics that radioactive materials decay over few years and some nuclear materials have their half-life until thousands of years.The past five decades of research have been spent harnessing the decay energy of the radioactive materials to develop batteries that can last until the radioactive reaction continues.Thus,an emergent opportunity of industrial symbiosis to make use of nuclear waste by using radioactive waste as raw material to develop bat-teries with long shelf life presents a great opportunity for sustainable energy resource development.However,the current canon of research on this topic is scarce.This perspective draws fresh discussions on the topic while highlighting future directions in this wealthy arena of research.Graphical abstract A long-lasting miniaturised nuclear battery utilising 14C radioactive isotope as fuel.

Research on thin grid materials of lead-acid batteries

A detailed investigation on Pb-Ca-Sn alloys was made in order to choose suitable grid alloys materials for thin plate lead-acid batteries. The electrochemical performances of alloys were investigated by electrochemical corrosion experiment, scanning electron microscope (SEM), and cyclic voltammetry (CV) test. The results indicate that Pb-Ca-Sn-Bi-Cu alloys can be used to make the grids used for thin grid lead-acid batteries, the content of bismuth has primary effects on the corrosion resistance of grid alloys, the composition of alloys plays an important role on batteries performance, and appropriate scale of elements can be choosed to obtain optimal electrochemical performance. The lead-acid batteries using this kind of grid show good performance by cycle life test.

Experiments Study on Charge Technology of Lead-Acid Electric Vehicle Batteries

The basic theory of the fast charge and several charge methods are introduced. In order to heighten charge efficiency of valve-regulated lead-acid battery and shorten the charge time, five charge methods are investigated with experiments done on the Digatron BNT 400-050 test bench. Battery current, terminal voltage, capacity, energy and terminal pole temperature during battery experiment were recorded, and corresponding curves were depicted. Battery capacity-time ratio, energy efficiency and energy-temperature ratio are put forward to be the appraising criteria of lead-acid battery on electric vehicle （EV）. According to the appraising criteria and the battery curves, multistage-current/negative-pulse charge method is recommended to charge lead-acid EV battery.

Separation of cadmium and nickel from waste Ni-Cd batteries

To separate the cadmium and nickel resources in waste Ni-Cd batteries, aself-designed vacuum distillation recycling system was studied under laboratory conditions. Theeffects of system temperature, operating pressure, and time on the separation of Ni and Cd werestudied respectively. The mechanism of vacuum thermal recycling was also discussed. Results showthat vacuum distillation is a very effective separation method for waste Ni-Cd batteries. At aconstant pressure, the increase of temperature can improve the separating efficiency of Cd. When thetemperature is 1 173 K, cadmium can evaporate completely from the samples during 3 h at 10 Pa. Thereduction of pressure in a certain range is effective to the separating of Cd from Ni-Cd batteriesby vacuum distillation.

Recycling waste crystalline-silicon solar cells: Application as high performance Si-based anode materials for lithium-ion batteries

Recycling useful materials such as Ag, Al, Sn, Cu and Si from waste silicon solar cell chips is a sustainable project to slow down the ever-growing amount of waste crystalline-silicon photovoltaic panels. However, the recovery cost of the above-mentioned materials from silicon chips via acid-alkaline treatments outweights the gain economically.Herein, we propose a new proof-of-concept to fabricate Si-based anodes with waste silicon chips as raw materials.Nanoparticles from waste silicon chips were prepared with the high-energy ball milling followed by introducing carbon nanotubes and N-doped carbon into the nanoparticles, which amplifies the electrochemical properties. It is explored that Al and Ag elements influenced electrochemical performance respectively. The results showed that the Al metal in the composite possesses an adverse impact on the electrochemical performance. After removing Al, the composite was confirmed to possess a pronounced durable cycling property due to the presence of Ag, resulting in significantly more superior property than the composite having both Al and Ag removed.

Simple electrode assembly engineering:Toward a multifunctional lead-acid battery

Electrochemical energy storage is a promising technology for the integration of renewable energy.Lead-acid battery is perhaps among the most successful commercialized systems ever since thanks to its excellent cost-effectiveness and safety records.Despite of 165 years of development,the low energy density as well as the coupled power and energy density scaling restrain its wider application in real life.To address this challenge,we optimized the configuration of conventional Pb-acid battery to integrate two gas diffusion electrodes.The novel device can work as a Pb-air battery using ambient air,showing a peak power density of 183 mW cm^(−2),which was comparable with other state-of-the-art metal-O_(2)batteries.It can also behave as a fuel cell,simultaneously converting H_(2)and air into electricity with a peak power density of 75 mW cm^(−2).Importantly,this device showed little performance degradation after 35 h of the longevity test.Our work shows the exciting potential of lead battery technology and demonstrates the importance of battery architecture optimization toward improved energy storage capacity.

Self-Discharge in Valve-Regulated Sealed Lead-Acid Batteries

Factors that cause the self-discharge in valve-regulated sealed lead-acid batteries are discussed and measures to inhibit the self-discharge are put forward.

Study of the Charge Acceptance of Small-Size Sealed Lead-Acid Batteries

ＳｔｕｄｙｏｆｔｈｅＣｈａｒｇｅＡｃｃｅｐｔａｎｃｅｏｆＳｍａｌｌ－ＳｉｚｅＳｅａｌｅｄＬｅａｄ－ＡｃｉｄＢａｔｔｅｒｉｅｓＤＯＮＧＢａｏｇｕａｎｇ；ＺＨＡＮＧＱｉｕｄａｏ；ＭＵＪｕｎｊｉａｎｇ（董保光，张秋道，穆俊江）（Ｄｅｐｔ．ｏｆＡｐｐｌｉｅｄ...

Potentiometric Measurement of State-of-Charge of Lead-Acid Batteries Using Polymeric Ferrocene and Quinones Derivatives

Measurement of state-of-charge of lead-acid batteries using potentiometric sensors would be convenient;however, most of the electrochemical couples are either soluble or are unstable in the battery electrolyte. This paper describes the results of an investigation of poly (divinylferrocene) (PDVF) and Poly(diethynylanthraquinone) (PAQ) couples in sulfuric acid with the view to developing a potentiometric sensor for lead-acid batteries. These compounds were both found to be quite stable and undergo reversible reduction/oxidation in sulfuric acid media. Their redox potential difference varied linearly with sulfuric acid concentration in the range of 1 M - 5 M (i.e. simulated lead-acid electrolyte during battery charge/discharge cycles). A sensor based on these compounds has been investigated.

From food waste to high-capacity hard carbon for rechargeable sodium-ion batteries

In this study,we introduce a straightforward and effective approach to produce P-doped hard carbon using coffee grounds as the precursor,with H_(3)PO_(4)serving as the doping agent.By varying the concentrations of H_(3)PO_(4)(1 M,2 M,and 3 M),we aimed to determine the optimal doping level for maximizing the incorporation of phosphorus ions into the carbon framework.Our investigation revealed that using 2 M of H_(3)PO_(4)as the dopant material for hard carbon led to promising electrochemical performance when employed as an anode material for sodium-ion batteries.The P-doped hard carbon,carbonized at 1300℃,exhibited an impressive reversible capacity of 341 mAh g^(-1) at a current density of 20 mA g^(-1),with an initial Coulombic efficiency(ICE)of 83%.This outstanding electrochemical performance of P-doped hard carbon can be attributed to its unique properties,including a porous agglomerated structure,a significant interlayer spacing,and the formation of C-P bonds.

Recovery of cadmium by high-temperature vaccum evaporation from Ni-Cd batteries

High temperature vaccum evaporation is a recycling technology that includes a selective material recovering process. The fundamental research on a process of disassembling and recovering selected materials from Ni Cd batteries was conducted using self designed experimental apparatus. An effective recycling technology based on the evaporation phenomenon of batteries and the elements of cadmium under the laboratory condition was studied. The results show that: (1)Ni/Cd can be effectively recovered by vacuum distillation at appropriate temperature, pressure and time, and high purity cadmium (>99%) can be obtained through the process; (2)the effective distillatory temperature should be at the range of 5731 173 K; (3)the higher the evaporation temperature, the lower the purity of cadmium in condensate

Reductive atmospheric acid leaching of spent alkaline batteries in H_2SO_4/Na_2SO_3 solutions

This work studies the optimum reductive leaching process for manganese and zinc recovery from spent alkaline battery paste. The effects of reducing agents, acid concentration, pulp density, reaction temperature, and leaching time on the dissolution of manganese and zinc were investigated in detail. Manganese dissolution by reductive acidic media is an intermediate-controlled process with an activation energy of 12.28 kJ＇mo1-1. After being leached, manganese and zinc were selectively precipitated with sodium hydroxide. The zinc was entirely con- verted into zincate （Zn（OH）42-） ions and thus did not co-precipitate with manganese hydroxide during this treatment （2.0 M NaOH, 90 min, 200 r/rain, pH 〉 13）. After the manganese was removed from the solution, the Zn（OH）4^2- was precipitated as zinc sulfate in the presence of sulfuric acid. The results indicated that this process could be effective in recovering manganese and zinc from alkaline batteries.

Characterization of Spent Household Zinc-Carbon Dry Cell Batteries in the Process of Recovery of Value Metals

Spent zinc-carbon dry cell batteries were characterized to assess the environmental impacts and also, to identify the potentials of recovering the metal values from these batteries. Different component parts of both new and spent batteries of all the five types (AAA, AA, C, D and 9V) were examined. The outer steel casings were found to be tin plated. Steel, zinc and manganese constituted 63 percent of the total weight of the battery. Average zinc and manganese contents were about 22 and 24 percent of the total weight of spent batteries. The electrolyte paste of the spent batteries contained 22 wt. percent zinc and 60 wt. percent manganese. The rest was chlorine, carbon and small amounts of iron and other impurity elements. The major phases in the fresh batteries were carbon, MnO2 and NH4Cl, while Zn(NH3)2Cl2, ZnO.Mn2O3, Mn3O2 and Mn2O4 were the prominent phases in the spent batteries. Presence of mercury and cadmium were not detected and a small percentage of lead was found in both the zinc anode and in the electrolyte paste.

Simple Rational Model for Discharge of Batteries with Aqueous Electrolytes, Based on Nernst Equation

A simple rational model is proposed for discharge of batteries with aqueous electrolytes, based on Nernst equation. Details of electrode kinetics are not taken into account. Only a few overall parameters of the battery are considered. A simple algorithm, with variable time step-length Δt, is presented, for proposed model. The model is first applied to Daniel cell, in order to clarify concepts and principles of battery operation. It is found that initial pinching, in time-history curve of voltage E-t, is due to initial under-concentration of product ion. Then, model is applied to a lead-acid battery. In absence of an ion product, and in order to construct nominator of Nernst ratio, such an ion, with coefficient tending to zero, is assumed, thus yielding unity in nominator. Time-history curves of voltage, for various values of internal resistance, are compared with corresponding published experimental curves. Temperature effect on voltage-time curve is examined. Proposed model can be extended to other types of batteries, which can be considered as having aqueous electrolytes, too.

Discarded Carbon-Zinc Batteries as Source of an Efficient Heterogeneous Fenton-Like Catalyst Employed to Degrade Organic Molecules in an Aqueous Medium

The present work evaluates the feasibility of using the raw material collected from discarded zinc-carbon batteries as heterogeneous catalyst to degrade the dye Indigo Carmine in an aqueous solution. Besides the evident environmental application, this work also presents an economic alternative for the production of new catalysts used to remediate polluted waters. For this, discarded carbon-zinc batteries were gathered, disassembled and their anodic paste collected. After acidic treatment and calcination at 500°C, characterization measurements, i.e. flame atomic absorption spectroscopy (FAAS), nitrogen sorption, X-ray diffraction (XRD) and scanning electron microscopy (SEM), revealed that the so-obtained material consisted mainly of ZnMn2O4. This material acts as a heterogeneous catalyst in a Fenton-like process that degrades the dye Indigo Carmine in water. That is probably due to the presence of Mn(III) (manganese in the +3 oxidation state) in this material that triggers the decomposition of hydrogen peroxide (H2O2) to yield hydroxyl radicals (HO·). Moreover, direct infusion electrospray ionization coupled to high resolution mass spectrometry (ESI-HRMS) was employed to characterize the main by-products resulting from such degradation process. These initial results thus indicate that raw materials from waste batteries can therefore be potentially employed as efficient Fenton-like catalysts to degrade organic pollutants in an aqueous solution.

Pb-Ca-Sn-Ba Grid Alloys for Valve-Regulated Lead Acid Batteries

The effect of barium additives on the process of anodic corrosion of lead-tin-calcium alloys in a 4.8 М sulfuric acid solution was studied. Cyclic voltammetry, impedance spectroscopy, weight loss measurements and scanning electronic microscope analysis have allowed exploring the oxidation process and characterizing the formed corrosion layer. According to our results, barium introduction into lead-tin-calcium alloys increases their hardness, reduces their electrochemical activity, and improves their corrosion stability. Reduction of the calcium content in the alloy can be compensated by adding barium. Barium dopation at lead-tin-calcium alloys decreases the resistance of the oxide layer formed on the grid surface, in a deeply discharged state, and raises its resistance during floating conditions and at a charged state of the positive electrode.

Analysis of Problems and Countermeasures about Recyclables Study on PET Bottles and Used Batteries

Advances in technology make full use of recyclable material as possible, so the efficient recovery of Recyclable material can avoid a lot of energy waste. This paper takes the PET plastic bottles and waste battery as an example, simple analyses the current situation of China＇ s processing Recyclable substance and development trend, and compared with the foreign outstanding cases, finally proposes the solution

废锂离子电池的冶金回收工艺研究进展

回收废锂离子电池对资源可持续性和人类健康至关重要。废锂离子电池需要经过预处理拆解为各种组分,其中正极材料是各种组分中最具回收价值和意义的部分。目前,冶金工艺是废锂离子电池正极材料回收的主要方法,该工艺主要包括废锂离子电池的预处理、有价金属的提取、产品的回收3个阶段。总结了各阶段的主要方法和进展,并对比了各种方法的优缺点。经对比发现在废锂离子电池的预处理阶段中,机械化的处理方式是未来的发展方向;在有价金属的提取和产品回收的2个阶段中,将各种工艺相耦合来开发绿色、低成本、高效率的组合工艺将是今后的发展趋势。

从废旧电池中回收二水磷酸铁再生LiFePO_(4)/C

使用酸浸—加热回流法从废旧磷酸铁锂电池中回收得到二水磷酸铁,将其作为原料并添加一定量的锂源和碳源,通过高温固相法再生了LiFePO_(4)/C,并研究了温度对再生LiFePO_(4)/C电化学性能的影响。首先采用酸浸—加热回流法对废旧磷酸铁锂正极片进行处理生成FePO_(4)·2H_(2)O,洗涤烘干后研磨得到FePO_(4)·2H_(2)O粉末,XRD表征和ICP测试结果显示回收得到的FePO_(4)·2H_(2)O结构完整、纯度较高。然后在FePO_(4)·2H_(2)O粉末中添加碳源,在高温下制备LiFePO_(4)/C材料,对其进行结构与形貌表征以及电化学测试,发现以葡萄糖为碳源、温度为700℃、葡萄糖量为理论生成磷酸铁锂质量的17%时再生的LiFePO_(4)/C电化学性能最佳,0.3 C倍率下再生的LiFePO_(4)/C首周放电比容量可达141.8 mAh/g,循环100周后容量保持率可维持在94.3%。通过与商用LiFePO_(4)/C进行电化学性能对比,进一步验证了该工艺再生的LiFePO_(4)/C有着优良的电化学性能。