Preparation of Liquor Flavoring from Yellow Water Based on Water Absorbent Resin

[Objective] This study was conducted to extract the scarce natural liquor flavorings desired by many liquor factories from yellow water. [Method] Strong water absorbent resin was used to absorb moisture from the yellow water in order to concentrate it into dense yellow water at first, followed by azcotropic dis- tillation of the previously concentrated yellow water, and then, catalytic esterification was performed to the remaining liquid after the distillation. [ Results] The 7. 066 7 fractions of concentrated yellow water with 56.7% ethanol could be obtained after the treatment of 100 fractions of yellow water with strong water absorbent resin. Azeotrope of 0.432 8 fraction of natural acetaldehyde, 0. 269 4 fraction of ethyl formate and methyl alcohol, 0. 975 0 fraction of ethyl acetate and methyl alco- hol could be obtained after the azeotropic distillation per 100 fractions of concentrated yellow water. After the addition of CaC12, O. 220 7 fraction of ethyl formate and 0. 514 2 fraction of ethyl acetate could be obtained after distillation of the azeotrope. Finally, 92. 094 8 fractions of esterification liquid with 38 kinds of flavor- ing compound could be obtained after catalytic esterification of 100 fractions of concentrated yellow water, and the content of ethyl acetate, ethyl propionate, ethyl- butyrate, ethyl valerate, ethyl lactate and ethyl bexanoate were as much as 142.9, 22.2, 54.2, 3.3,75.4 and 158.9 g/L, respectively. [ Conclusion] Top-grade Luzhou-flavor liquor could be made by mixing 6.5 fractions of common liquor with acetaldehyde, ethyl formate, ethyl acetate and esterification liquid which were ob- tained from 1 fraction of yellow water. Therefore, the yellow water has a great recycling value, and it tells us that the technique of extracting liquor flavorings from yellow water has tremendous market value.

Application of sustainable basil seed as an eco-friendly multifunctional additive for water-based drilling fluids

Basil seed,containing anionic heteropolysaccharides in its outer pericarp,swells as gelatinous hydrocolloid when soaked in water.In this study,basil seed powder(BSP)was used as a multifunctional additive for water-based drilling fluids.The chemical composition,water absorbency,rheological properties of aqueous suspension of BSP were tested.The effect of BSP on the rheological and filtration of bentonitebased drilling fluid before and after thermal aging was investigated.The inhibition characteristics were evaluated by linear swelling,shale cuttings dispersion and shale immersion test.Lubricity improvement by BSP was measured with extreme pressure lubricity test.The results revealed that incorporation of BSP into bentonite suspension improved rheological and filtration properties effectively after thermal aging of 120℃.BSP exhibited superior inhibitive capacity to xanthan and synergistic effect with KCl.BSP could reduce friction by forming hydration layer.The nanoscale three-dimensional network structures enable BSP to maintain high water retention and absorb strongly on bentonite and metal surface,contributing to enhanced rheology,filtration,inhibition and lubrication properties.The versatile characteristic of BSP,as well as biodegradation makes it a promising additive using in high performance water-based drilling fluid and a potential alternative to conventional synthetic polymers.

The Optimization of Synthesizing Graft Copolymer of Starch with Vinyl Monomers

The graft copolymerization of acrylamide （ AM ） / acrylic acid （ AA ） onto starch （ St- g-pAA and St-g-p（AA-co-AM） ） was carried out using an orthngonal test method. The combined effects of different reaction conditions on the water absorbency of the graft copolymers were optimized through mathematical statistical methods of range and square variance analysis. The maximum water absorbency was obtained when the ratio of dried starch to distilled water was 1 ： 8 （ w/w ）, the ratio of starch to monomer 1 ： 6 （ w/w ）, the initiator concentration 4.40 × 10^-3 mol/L, the crosslinker concentration 10.86 × 10^-2 mol/L, and the basicity to AA 0. 70（ mol/mol ）. Both the graft copolymers have an excellent water absorption capacity in distilled water aact in 0. 9wt% NaCl solution. It was also found that in distilled water the water absorbency of St-g-pAA was higher than that of St-g-p（ AA-co-AM） , while in 0.9wt% NaCl solution, the situation was just the reverse. The correlation between the water absorbeacy anct the nature of the solution anct the properties of the copolymers, which is related to the properties of the monomers, was discussed. The grafting of AA ancl AM onto starch was confirmed by the IR spectra of St-g-pAA and St-g-p（ AA-co-AM）.

Preparation, Swelling and Antibacterial Behaviors of N-Succinyl Chitosan-g-Poly(Acrylic Acid-co-Acrylamide) Superabsorbent Hydrogels

Superabsorbent hydrogels were prepared successfully from N-succinyl chitosan grafted poly（acrylic acid-co-acrylamide）. The potassium persulfate（KPS）, N, N＇-methylenebisacrylamide（MBA） were used as the initiator and crosslinker, respectively. Fourier transform infrared spectroscopy（FTIR） and scanning electron microscopy（SEM） were used to confirm the porous network structure of superabsorbent hydrogel. The effects of reaction parameters on the swelling behaviors of the superabsorbent hydrogels were investigated. The results indicated that water absorbency increased first, and then decreased gradually with the increase in the contents of monomer（AA＋AM）, KPS, MBA or acrylamide. The product had excellent water absorbency of 1375 g/g in distilled water and 83 g/g in 0.9wt% NaCl solution. Simultaneously, the superabsorbent hydrogels were p H sensitive. The antibacterial activities of the hydrogels against Escherichia coli（E. coli） were improved effectively because of polyamidoamine（PAMAM） dendrimer absorbed in the hydrogels.

Degradation products of different water content sevoflurane in carbon dioxide absorbents by gas chromatography-mass spectrometry analysis

Background Sevoflurane is currently used as a volatile inhalation anesthetic with many clinical advantages. A representative degradation product, compound A, was quantitatively measured to investigate whether there are different reactions between two kinds of water content sevoflurane formulations with different carbon dioxide （CO2） absorbents.

Development of Polymer Materials for Combating Desertification

Aiming respectively at the two problems in desertiflcation areas, namely water shortage and serious soil erosion, the polymer materials for combating desertiflcation may be classified as water absorbing-retaining polymers (WARPs) and sandy soil stabilizing polymers (SSSPs). Their further classifications and current researcfl situations were introduced. It is suggested that the major hindrancefor their wide appHcation is the high cost. The authors' newest research resuits on cutting cost and enhancing ef...