A couple of additional cooling nozzles were assembled under traditionalatomization nozzles in order to improve the process and produce the powder with fine microstructureand low oxygen. The influence of the process pa...A couple of additional cooling nozzles were assembled under traditionalatomization nozzles in order to improve the process and produce the powder with fine microstructureand low oxygen. The influence of the process parameters on the properties of the powder wasinvestigated. The results show that finer powders with lower oxygen content and more irregular shapecan be achieved by combinatorial atomizing process comparing with normal one under the sameatomizing pressure.展开更多
A combustion tube experiment platform was designed and used to study the inerting conditions and capacity of entrained atomized water on premixed methane–air flame. The structure of a laminar flame of premixed methan...A combustion tube experiment platform was designed and used to study the inerting conditions and capacity of entrained atomized water on premixed methane–air flame. The structure of a laminar flame of premixed methane–air gas and the process of interaction between atomized water and flame was recorded, and the rules of combustion velocity, stability and strength rate of laminar flame were experimentally studied. The inerting process and mechanism was analyzed, and the characteristics of inerting premixed methane–air gas within explosion limits by atomized water were acquired. The research results show that: for the premixed methane–air gas with a concentration of 7%, the minimum inerting atomized water flux is 20.8 m L/(m2min); for the premixed methane–air gas with a concentration of 9%, the minimum inerting atomized water flux is 32.9 m L/(m2min); for the premixed methane–air gas with a concentration of 11%, the minimum inerting atomized water flux is 44.6 m L/(m2min). The research results are significant for extinguishing methane flame and inhibiting of methane explosion using atomized water.展开更多
On-line ion-exchange separation and preconcentration were combined with flow-injection hydride generation atomic absorption spectrometry (HGAAS) to determine ultra-trace amounts of antimony in water samples. Antimony(...On-line ion-exchange separation and preconcentration were combined with flow-injection hydride generation atomic absorption spectrometry (HGAAS) to determine ultra-trace amounts of antimony in water samples. Antimony(Ⅲ) was preconcentrated on a micro-column packed with CPG-8Q chelating ion-exchanger using time-based sample loading and eluted by 4 mol l^(-1) HCl directly into the hydride generation AAS system. A detection limit (3σ) of 0.0015μg l^(-1) Sb(Ⅲ) was obtained on the basis of a 20 fold enrichment and with a sampling frequency of 60h^(-1). The precision was 1.0% r.s.d.(n=11) at the 0.5μg l^(-1) Sb(Ⅲ) level. Recoveries for the analysis of antimony in tap water, snow water and sea water samples were in the range 97-102%.展开更多
文摘A couple of additional cooling nozzles were assembled under traditionalatomization nozzles in order to improve the process and produce the powder with fine microstructureand low oxygen. The influence of the process parameters on the properties of the powder wasinvestigated. The results show that finer powders with lower oxygen content and more irregular shapecan be achieved by combinatorial atomizing process comparing with normal one under the sameatomizing pressure.
基金supported by the National Natural Science Foundation of China(No.51304006)the Natural Science Foundation of Anhui Province(No.1408085QE87)the Training Fund for Youth Backbones of Anhui University of Science&Technology(No.20120012)
文摘A combustion tube experiment platform was designed and used to study the inerting conditions and capacity of entrained atomized water on premixed methane–air flame. The structure of a laminar flame of premixed methane–air gas and the process of interaction between atomized water and flame was recorded, and the rules of combustion velocity, stability and strength rate of laminar flame were experimentally studied. The inerting process and mechanism was analyzed, and the characteristics of inerting premixed methane–air gas within explosion limits by atomized water were acquired. The research results show that: for the premixed methane–air gas with a concentration of 7%, the minimum inerting atomized water flux is 20.8 m L/(m2min); for the premixed methane–air gas with a concentration of 9%, the minimum inerting atomized water flux is 32.9 m L/(m2min); for the premixed methane–air gas with a concentration of 11%, the minimum inerting atomized water flux is 44.6 m L/(m2min). The research results are significant for extinguishing methane flame and inhibiting of methane explosion using atomized water.
文摘On-line ion-exchange separation and preconcentration were combined with flow-injection hydride generation atomic absorption spectrometry (HGAAS) to determine ultra-trace amounts of antimony in water samples. Antimony(Ⅲ) was preconcentrated on a micro-column packed with CPG-8Q chelating ion-exchanger using time-based sample loading and eluted by 4 mol l^(-1) HCl directly into the hydride generation AAS system. A detection limit (3σ) of 0.0015μg l^(-1) Sb(Ⅲ) was obtained on the basis of a 20 fold enrichment and with a sampling frequency of 60h^(-1). The precision was 1.0% r.s.d.(n=11) at the 0.5μg l^(-1) Sb(Ⅲ) level. Recoveries for the analysis of antimony in tap water, snow water and sea water samples were in the range 97-102%.