To research techniques for removing the water blocking effect caused by hydraulic applications in coal seams,the use of surfactants is proposed,based on the mechanics of the water blocking effect.Centrifugal experimen...To research techniques for removing the water blocking effect caused by hydraulic applications in coal seams,the use of surfactants is proposed,based on the mechanics of the water blocking effect.Centrifugal experiments were used to validate the effects of using surfactants;the results show that after dealing with vacuum saturation with water,the volume of micropores decreases,which results in a larger average pore size,and the volume of transitional pores,mesopores,macropores and total pores increases.Based on the distribution of pore size,the operation mode of ‘‘water infusion after gas extraction,then continuing gas extraction" is recommended to improve the volume of coal mine gas drainage.When the reflectance of vitrinite in coal samples is less than 1,using the surfactants Fast T,1631,APG,BS can mitigate the damage caused by the water blocking effect.But when the reflectance of vitrinite is larger than 1.4,the damage caused by the water blocking effect can be increased.When the surfactant CMC is used in hydraulic applications,the capillary forces of coal samples are almost negative,which means the capillary force is in the same direction as the gas extraction.The direction of capillary forces benefits the gas flow.So,using CMC can play an active role in removing the water blocking effect.Centrifugal experiments confirm that using CMC can effectively remove the water blocking effect,which has a beneficial effect on improving the gas drainage volume.展开更多
Shale samples of Silurian Longmaxi Formation in the Changning area of the Sichuan Basin, SW China, were selected to carry out scanning electron microscopy, CT imaging, high-pressure mercury injection, low-temperature ...Shale samples of Silurian Longmaxi Formation in the Changning area of the Sichuan Basin, SW China, were selected to carry out scanning electron microscopy, CT imaging, high-pressure mercury injection, low-temperature nitrogen adsorption and imbibition experiments to compare the hydration characteristics of montmorillonite and illite, analyze the main factors affecting the water block removal of shale, and reveal the mechanisms of pore structure evolution during shale hydration. The hydration characteristics of shale are closely related to the composition of clay minerals, the shale with high illite content is not susceptible to hydration and thus has limited room for pore structure improvement;the shale with high montmorillonite is susceptible to hydration expansion and thus has higher potential of pore structure improvement by stimulation;the shale with high illite content has stronger imbibition in the initial stage, but insufficient diffusion ability, and thus is likely to have water block;the shale with high montmorillonite content has weaker imbibition in the initial stage but better water diffusion, so water blocking in this kind of shale can be removed to some degree;the shale reservoir has an optimal hydration time, when it is best in physical properties, but hydration time too long would cause damage to the reservoir, and the shale with high illite content has a shorter optimal hydration time;inorganic cations can inhibit the hydration of clay minerals and have stronger inhibition to illite expansion, especially K^(+);for the reservoir with high content of montmorillonite, the cation content of fracturing fluid can be lowered to promote the shale hydration;fracturing fluid with high K^(+) content can be injected into reservoirs with high illite content to suppress hydration.展开更多
The Reynolds-averaged Navier–Stokes(RANS)equation was solved using computational fluid dynamics to study the effect of the circulating tank wall on the hydrodynamic coefficient of an autonomous underwater vehicle(AUV...The Reynolds-averaged Navier–Stokes(RANS)equation was solved using computational fluid dynamics to study the effect of the circulating tank wall on the hydrodynamic coefficient of an autonomous underwater vehicle(AUV).Numerical results were compared with the experimental results in the circulating water tank of Harbin Engineering University.The numerical results of the model with different scale ratios under the same water in the flume were studied to investigate the effect of blockage on the hydrodynamic performance of AUV in the circulating flume model test.The results show that the hydrodynamic coefficient is stable with the scale reduction of the model.The influence of blocking effect on AUV is given by combining theoretical calculation with experiment.展开更多
基金financially supported by the National Natural Science Foundation of China (No.51504084)the Education Department of Fujian Province (No.JA15493)
文摘To research techniques for removing the water blocking effect caused by hydraulic applications in coal seams,the use of surfactants is proposed,based on the mechanics of the water blocking effect.Centrifugal experiments were used to validate the effects of using surfactants;the results show that after dealing with vacuum saturation with water,the volume of micropores decreases,which results in a larger average pore size,and the volume of transitional pores,mesopores,macropores and total pores increases.Based on the distribution of pore size,the operation mode of ‘‘water infusion after gas extraction,then continuing gas extraction" is recommended to improve the volume of coal mine gas drainage.When the reflectance of vitrinite in coal samples is less than 1,using the surfactants Fast T,1631,APG,BS can mitigate the damage caused by the water blocking effect.But when the reflectance of vitrinite is larger than 1.4,the damage caused by the water blocking effect can be increased.When the surfactant CMC is used in hydraulic applications,the capillary forces of coal samples are almost negative,which means the capillary force is in the same direction as the gas extraction.The direction of capillary forces benefits the gas flow.So,using CMC can play an active role in removing the water blocking effect.Centrifugal experiments confirm that using CMC can effectively remove the water blocking effect,which has a beneficial effect on improving the gas drainage volume.
基金Supported by the Science and Technology Planning Project of Sichuan Province,China(2020YJ0135)National Natural Science Foundation of China(51874250)。
文摘Shale samples of Silurian Longmaxi Formation in the Changning area of the Sichuan Basin, SW China, were selected to carry out scanning electron microscopy, CT imaging, high-pressure mercury injection, low-temperature nitrogen adsorption and imbibition experiments to compare the hydration characteristics of montmorillonite and illite, analyze the main factors affecting the water block removal of shale, and reveal the mechanisms of pore structure evolution during shale hydration. The hydration characteristics of shale are closely related to the composition of clay minerals, the shale with high illite content is not susceptible to hydration and thus has limited room for pore structure improvement;the shale with high montmorillonite is susceptible to hydration expansion and thus has higher potential of pore structure improvement by stimulation;the shale with high illite content has stronger imbibition in the initial stage, but insufficient diffusion ability, and thus is likely to have water block;the shale with high montmorillonite content has weaker imbibition in the initial stage but better water diffusion, so water blocking in this kind of shale can be removed to some degree;the shale reservoir has an optimal hydration time, when it is best in physical properties, but hydration time too long would cause damage to the reservoir, and the shale with high illite content has a shorter optimal hydration time;inorganic cations can inhibit the hydration of clay minerals and have stronger inhibition to illite expansion, especially K^(+);for the reservoir with high content of montmorillonite, the cation content of fracturing fluid can be lowered to promote the shale hydration;fracturing fluid with high K^(+) content can be injected into reservoirs with high illite content to suppress hydration.
基金Supported by the National Natural Science Foundation of China(Grant No.51909040)the Fund of Science and Technology on Underwater Vehicle Technology(Grant No.JCKYS2022SXJQR-11)+1 种基金the Heilongjiang Provincial Natural Science Foundation of China(Grant No.LH2020E073)the Key Technology Research and Development Program of Shandong(Grant No.2020CXGC010702).
文摘The Reynolds-averaged Navier–Stokes(RANS)equation was solved using computational fluid dynamics to study the effect of the circulating tank wall on the hydrodynamic coefficient of an autonomous underwater vehicle(AUV).Numerical results were compared with the experimental results in the circulating water tank of Harbin Engineering University.The numerical results of the model with different scale ratios under the same water in the flume were studied to investigate the effect of blockage on the hydrodynamic performance of AUV in the circulating flume model test.The results show that the hydrodynamic coefficient is stable with the scale reduction of the model.The influence of blocking effect on AUV is given by combining theoretical calculation with experiment.
