Failure mechanism and control technology of water-immersed roadway in high-stress and soft rock in a deep mine

Aiming at soft rock ground support issues under conditions of high stress and long-term water immersion, the ground failure mechanism is revealed by taking the deep-water sumps of Jiulong Mine as the engineering background and employing field investigation, tests of rock structure, mechanical properties and mineral composition. The main factors leading to the surrounding rock failure include the high and complex stress state of the water sumps, high-clay content and water-weakened rock, and the unreasonable support design. In this paper, the broken and fractured rock mass near roadway opening is considered as ground small-structure, and deep stable rock mass as ground large-structure. A support technology focusing on cutting off the water, strengthening the small structure of the rock and transferring the large structure of the rock is proposed. The proposed support technology of interconnecting the large and small structures, based on high-strength bolts, high-stiffness shotcrete layer plugging water,strengthening the small structure with deep-hole grouting and shallow-hole grouting, highpretensioned cables tensioned twice to make the large and small structures bearing the pressure evenly,channel-steel and high-pretensioned cables are used to control floor heave. The numerical simulation and field test show that this support system can control the rock deformation of the water sumps and provide technical support to similar roadway support designs.

Study on Mechanism of Water Inrush of Karst Tunnels

Water inrush,which is one of the challenging issues and hot topics in the tunneling industry,is very easy to occur during the construction of karst tunnels.The mechanism of water inrush of karst tunnels is discussed and analyzed in the paper:the water inrush of karst tunnels is generally divided into three steps,i.e.,the forming of the hazard source,the forming of the water inrush passage and the failure of the anti-inrush rock mass.The failure of the anti-inrush rock mass of karst tunnels are classified into 5 types,i.e.,the integral tensile-shear failure,the hydraulic fracturing,the infiltration induced sliding of the filling medium,the loss of key blocks and the comprehensive water inrush mode.The failure mechanism is studied on basis of typical cases and by means of numerical simulation or theoretical analysis.Conclusion is drawn that most of the water inrushes in actual tunneling are comprehensive water inrushes,which are the comprehensive results of the interrelation and interaction of various water inrush types,and that different types of water inrushes have related continuity and progressive evolution relationships under certain conditions.

Influential factors and control of water inrush in a coal seam as the main aquifer

In this paper, a combination of field measurement, theoretical analysis and numerical simulation were used to study the main control factors of coal mine water inrush in a main aquifer coal seam and its control scheme. On the basis of revealing and analyzing the coal seam as the main aquifer in western coal mine of Xiao Jihan coal mine, the simulation software of PHASE-2D was applied to analyze the water inflow under different influencing factors. The results showed that water inflow increases logarithmically with the coal seam thickness, increases as a power function with the permeability coefficient of the coal seam, and increases linearly with the coal seam burial depth and the head pressure; The evaluation model for the factors of coal seam water inrush was gained by using nonlinear regression analysis with SPSS. The mine water inrush risk evaluation partition within the scope of the mining field was obtained,through the engineering application in Xiao Jihan coal mine. To ensure the safe and efficient production of the mine, we studied the coal mine water disaster prevention and control measures of a main aquifer coal seam in aspects of roadway driving and coal seam mining.

A state‑of‑the‑art review on rock seepage mechanism of water inrush disaster in coal mines

Water inrush is one of the most dangerous disasters in coal mining.Due to the large-scale mining and complicated hydrogeological conditions,thousands of deaths and huge economic losses have been caused by water inrush disasters in China.There are two main factors determining the occurrence of water inrush:water source and water-conducting pathway.Research on the formation mechanism of the water-conducting pathway is the main direction to prevent and control the water inrush,and the seepage mechanism of rock mass during the formation of the water-conducting pathway is the key for the research on the water inrush mechanism.This paper provides a state-of-the-art review of seepage mechanisms during water inrush from three aspects,i.e.,mechanisms of stress-seepage coupling,fow regime transformation and rock erosion.Through numerical methods and experimental analysis,the evolution law of stress and seepage felds in the process of water inrush is fully studied;the fuid movement characteristics under diferent fow regimes are clearly summarized;the law of particle initiation and migration in the process of water inrush is explored,and the efect of rock erosion on hydraulic and mechanical properties of the rock media is also studied.Finally,some limitations of current research are analyzed,and the suggestions for future research on water inrush are proposed in this review.

Mechanism of mine water-inrush through a fault from the floor

The mechanism of mine water inrushes in coal mines in China differs considerably from that in other countries.In China, most water inrushes occur from floor strata, where the water-inrush sources are karstic limestone aquifers.Our study describes the mechanism of mine water inrushes through a fault in the mine floor using principles of strata mechanics and the path of water inrush from an aquifer to the working face.A criterion to judge whether a ground water inrush will occur through a fault or not is also described, together with a case history of water inflow in the Feicheng coalfield, China.

Formation mechanisms of water inrush and mud burst in a migmatite tunnel：a case study in China

This paper presents a case study of water inrush and mud burst occurring in a migmatite tunnel to study its formation mechanisms. The geological investigation and mineralogical analysis showed that water inrush and mud burst in the migmatite was closely related to the component of the host rock. High content of soluble minerals,e.g.,calcite and dolomite,would make the migmatite rock prone to be fragmentized,isintegrated and eventually form different sorts of connected or semi-connected veins. The field exploration revealed most cavities in the magmatite tunnel were eroded by groundwater and formed large interconnected networks. The two faults and the dike in the magmatite tunnel became the preferred paths and provided great convenience for plenty of precipitation and mud slurry. Due to high water pressure and blast disturbance,the cavities can soon connect each other as well as all sorts of veins,forming a complex ground channel for water inrush and mud burst. To estimate the potential occurrenceof water inrush and mud burst,the water bursting coefficient was employed. The results showed the water bursting coefficient of the magmatite tunnel was much bigger than the threshold values and it can be used to explain the accident of water inrush and mud burst occurring in the magmatite tunnel.

Instability mechanism and control technology of soft rock roadway affected by mining and high confined water

Based on deformation and failure characteristics of the second belt conveyor roadway at level II of Zhuxianzhuang coal mine, laboratory experiments, numerical calculation and field test were adopted to analyze the composition and microstructure of mudstone, the law of mudstone hydration and its strength weakening induced by water, the characteristics of surrounding rock deformation and failure under the action of confined water. Results showed that montmorillonite clay minerals accounted for as much as 76% of mudstone, with a large number of pores existing in the microstructure. Besides, as the molecular structure of montmorillonite changed, mudstone microstructure damage occurred with the macroscopic manifestation of its rheological instability. Weakening degree of confined water on residual strength of mudstone was almost 50%. The instability mechanism of soft rock roadway caused by high confined water is that surrounding rock circulates the process of ‘‘fracture-seepage-mud ding-closed'' twice, which weakens its strength and leads to roadway instability. A combined support technology, namely the, ‘‘high-toughness sealing layer + hollow grouting cables + full-length anchoring bolts with deep borehole'' was proposed. Based on field observation, the soft rock roadway was controlled effectively, which also verified the effectiveness of new control technology for surrounding rock.

Analysis and control on anomaly water inrush in roof of fully-mechanized mining field

从水流入的矿房顶的探穴由于异常压力是能在生产期间发生在矿的主要灾难和事故之一。房顶水流入能触发大量房顶倒塌，引起从打破房顶支持的主要事故当时探穴。这些失败充满井并且做很多损坏到矿并且危及矿安全。我们的目的到在工作的 #6301 压碎支持的水流入的异例在 Yanzhou 采矿组的 Jisan 煤矿面对的分析。通过到房顶的水流入的信息，损坏由构造运动引起了，损坏的信息在矿桥墩关于压力的分发由房顶倒塌和理论引起了，我们调整工作的脸的长度和打开离开的位置的忠告相对切了到富有的水区域。在异常房顶压力的情况中，我们应该开发一个州的方程估计有鈥渢r ansferring 的预防措施摇横梁鈥 ? 理论。同时，我们在宝库改进排水设备和保证的足够的水保留的能力。这些都是主要技术对异常的水流入在房顶引起的事故保证控制和预防，因此在一个煤矿的生产过程保证安全。

Structural mechanism and construction method of mud and water inrush in Xiangyun tunnel of Guangtong-Dali railway

Mud and water inrush in tunnel is a common problem in the construction process. Nowadays, the research and classification on this are mostly focused on karst situations. According to the characteristics of the surrounding rock and damage forms of the tunnel in the studied area, the author analyzed the geological and structural characteristics of mud and water inrush in tunnel and obtained their construction type. Meanwhile, the advanced water detection under the complex geological conditions was studied by using induced polarization method, transient electromagnetic method and three-dimensional seismic method, it can be concluded that the water-rich fracture zone exists within the detection range with a risk of large mud and water inrush disaster. The concrete construction treatment measures are put forward:①cement-water glass binary slurry is selected as the material for ground and hole grouting, its advantage is that the gel time can be controlled, and it has certain grout ability in the strata with large permeability coeffcient, which is conducive to excavate construction immediately after grouting.②applying the mature retrograde grouting construction can reduce grouting time and improve the excavation efficiency.

Mechanism of Electromagnetic Flow Control Enhanced by Electro-Discharge in Water

Pulsed discharge utilized to achieve large current density in the electromagnetic flow control is numerically studied. A mathematic discharge model is established to calculate the plasma channel, and an actuator is designed to generate the Lorentz force in the micro plasma channel. During the discharge process, the resistance in the channel decreases rapidly and a large current density appears between the discharge electrodes. After the actuator is applied in the leading edge of a flat plate, the separation region and downstream turbulent boundary layer on the plate disappear. Meanwhile, a skin-friction drag force reduction is achieved.

Mechanical model of water inrush from coal seam floor based on triaxial seepage experiments

In order to study the mechanism of confined water inrush from coal seam floor,the main influences on permeability in the process of triaxial seepage experiments were analyzed with methods such as laboratory experiments,theoretical analysis and mechanical model calculation.The crack extension rule and the ultimate destruction form of the rock specimens were obtained.The mechanism of water inrush was explained reasonably from mechanical point of view.The practical criterion of water inrush was put forward.The results show that the rock permeability "mutation" phenomenon reflects the differences of stress state and cracks extension rate when the rock internal crack begins to extend in large-scale.The rock ultimate destruction form is related to the rock lithology and the angle between crack and principal stress.The necessary condition of floor water inrush is that the mining pressure leads to the extension and transfixion of the crack.The sufficient condition of floor water inrush is that the confined water’s expansionary stress in normal direction and shear stress in tangential direction must be larger than the internal stress in the crack.With the two conditions satisfied at the same time,the floor water inrush accident will occur.

Analysis on the Characteristics and Laws of Tunnel Hydraulic Inrush in Karst Area

As highways are extended to deep mountains,high altitudes,and special geological conditions,tunnel construction becomes more and more challenging,especially the construction of tunnels in karst areas.Due to the particularity of the regional geological structure,karst is well developed in the southwest of our country,especially at areas where the problem of tunnel water inrush in karst areas is more prominent.To further ensure the safe construction and operation of tunnels,the characteristics of tunnels in karst areas is analyzed in this article.

Reservoir-induced landslides and risk control in Three Gorges Project on Yangtze River,China

The Three Gorges region in China was basically a geohazard-prone area prior to construction of the Three Gorges Reservoir （TGR）. After construction of the TGR, the water level was raised from 70 m to 175 m above sea level （ASL）, and annual reservoir regulation has caused a 30-m water level difference after impoundment of the TGR since September 2008. This paper first presents the spatiotemporal distribution of landslides in six periods of 175 m ASL trial impoundments from 2008 to 2014. The results show that the number of landslides sharply decreased from 273 at the initial stage to less than ten at the second stage of impoundment. Based on this, the reservoir-induced landslides in the TGR region can be roughly classified into five failure patterns, i.e. accumulation landslide, dip-slope landslide, reversed bedding landslide, rockfall, and karst breccia landslide. The accumulation landslides and dip-slope landslides account for more than 90%. Taking the Shuping accumulation landslide （a sliding mass volume of 20.7 × 106 m^3） in Zigui County and the Outang dip-slope landslide （a sliding mass volume of about 90 × 106 m^3） in Fengjie County as two typical cases, the mechanisms of reactivation of the two landslides are analyzed. The monitoring data and factor of safety （FOS） calculation show that the accumulation landslide is dominated by water level variation in the reservoir as most part of the mass body is under 175 m ASL, and the dip-slope landslide is controlled by the coupling effect of reservoir water level variation and precipitation as an extensive recharge area of rainfall from the rear and the front mass is below 175 m ASL. The characteristics of landslide-induced impulsive wave hazards after and before reservoir impoundment are studied, and the probability of occurrence of a landslide-induced impulsive wave hazard has increased in the reservoir region. Simulation results of the Ganjingzi landslide in Wushan County indicate the strong relationship between landslide-induced surge and water variation with high potential risk to shipping and residential areas. Regarding reservoir regulation in TGR when using a single index, i.e. 1-d water level variation, water resources are not well utilized, and there is also potential risk of disasters since 2008. In addition, various indices such as 1-d, 5-d, and 10-d water level variations are proposed for reservoir regulation. Finally, taking reservoir-induced landslides in June 2015 for example, the feasibility of the optimizing indices of water level variations is verified.

Application of HEMS cooling technology in deep mine heat hazard control

This paper mainly deals with the present situation, characteristics, and countermeasures of cooling in deep mines.Given existing problems in coal mines, a HEMS cooling technology is proposed and has been successfully applied in some mines.Because of long-term exploitation, shallow buried coal seams have become exhausted and most coal mines have had to exploit deep buried coal seams.With the increase in mining depth, the temperature of the surrounding rock also increases, resulting in ever increasing risks of heat hazard during mining operations.At present, coal mines in China can be divided into three groups, i.e., normal temperature mines, middle-to-high temperature mines and high temperature mines, based on our investigation into high temperature coal mines in four provinces and on in-situ studies of several typical mines.The principle of HEMS is to extract cold energy from mine water inrush.Based on the characteristics of strata temperature field and on differences in the amounts of mine water inrush in the Xuzhou mining area, we proposed three models for controlling heat hazard in deep mines:1) the Jiahe model with a moderate source of cold energy;2) the Sanhejian model with a shortage of source of cold energy and a geothermal anomaly and 3) the Zhangshuanglou model with plenty of source of cold energy.The cooling process of HEMS applied in deep coal mine are as follows:1) extract cold energy from mine water inrush to cool working faces;2) use the heat extracted by HEMS to supply heat to buildings and bath water to replace the use of a boiler, a useful energy saving and environmental protection measure.HEMS has been applied in the Jiahe and Sanhejian coal mines in Xuzhou, which enabled the temperature and humidity at the working faces to be well controlled.

Principles and technology for stepwise utilization of resources for mitigating deep mine heat hazards

As is well known, deep mines are hot. As mining depth increases, the temperature of the surrounding rock also increases. This seriously affects mine safety and production and has restricted the exploitation of deep coal resources. Therefore, reducing the working face temperature to improve working conditions by controlling these heat hazards is an urgent problem. Considering problems in cooling deep mines both domestically and abroad along with the actual conditions of the Zhangshuanglou coal mine, we propose a HEMS technology that uses heat resources from deep mines in a stepwise manner. HEMS means a high temperature ex-change machinery system. Mine inrush-water is used as a source of cooling. Twice the energy is extracted from the mine inrush water. Heat is used for building heating in the winter and cold water is used for cooling buildings in the summer. This opens a new technology for stepwise utilization of heat energy in deep mines. Energy conservation and reduced pollution, an improved environment and sustainable economic development are realized by this technique. The economic and social effects are obvious and illustrate a good prospect for the application and extension of the method.

MIC in Circulating Cooling Water System

MIC is one of the main problems of circulating cooling water system. The direct economic loss by MIC is about 300 to 500 billion dollars. It is good to understand MIC in order to control MIC. Source and species of microorganisms was introduced firstly. There are three kinds of microorganisms in the system, including bacteria, fungi and algae. Species of these microorganisms are shown in the paper. Then, mechanisms of MIC are analysed. Although there is no universal mechanism of MIC, MIC is still mainly an electrochemical corrosion in nature. Meanwhile, the mechanisms on SRB and iron bacteria are introduced in details. At last, several methods of microorganisms control are put forward in the paper.

Research progress and application prospect of functional adhesive materials in the field of oil and gas drilling and production

By summarizing the composition,classification,and performance characterization of functional adhesive materials,the adhesion mechanisms of functional adhesive materials,such as adsorption/surface reaction,diffusion,mechanical interlocking,and electrostatic adsorption,are expounded.The research status of these materials in oil and gas drilling and production engineering field such as lost circulation prevention/control,wellbore stabilization,hydraulic fracturing,and profile control and water plugging,and their application challenges and prospects in oil and gas drilling and production are introduced comprehensively.According to the applications of functional adhesive materials in the field of oil and gas drilling and production at this stage,the key research directions of functional adhesive materials in the area of oil and gas drilling and production are proposed:(1)blending and modifying thermoplastic resins or designing curable thermoplastic resins to improve the bonding performance and pressure bearing capacity of adhesive lost circulation materials;(2)introducing low-cost adhesive groups and positive charge structures into polymers to reduce the cost of wellbore strengthening agents and improve their adhesion performance on the wellbore;(3)introducing thermally reversible covalent bond into thermosetting resin to prevent backflow of proppant and improve the compressive strength of adhesive proppant;(4)introducing thermally reversible covalent bonds into thermoplastic polymers to improve the temperature resistance,salt-resistance and water shutoff performance of adhesive water shutoff agents.

隧道突涌水灾害缩尺物理模型试验研究综述

随着我国经济的快速发展,隧道工程建设越来越多地面临着大埋深、高地应力、高地温、高渗透压力等复杂地质环境,运用物理模型试验开展复杂环境下隧道突涌水灾变机理与安全防控研究已成为岩石力学的热点问题。结合近年来国内外针对隧道突涌水灾变缩尺物理模型试验开展的研究工作,重点对该类物理模型的流固耦合相似理论、相似材料研制、渗透压加载方法等内容进行了系统梳理,并对下一步的可能发展方向进行展望。参考部分文献和突水典型案例后,总结了流固耦合相似准则和高地应力下的相似准则、相似材料选用方案及材料配比、试验中的水压加载方案,认为未来关注的重点包括考虑温度场的物理模型试验相似准则的研究和涌水涌泥与突水突泥间渐变过程的研究2个方面。