The energy efficient product can be operated with longer duration.They offer wonderful solutions compared to other conventional water pumping system as it needs less maintenance,simple in installation,zero fuel cost,l...The energy efficient product can be operated with longer duration.They offer wonderful solutions compared to other conventional water pumping system as it needs less maintenance,simple in installation,zero fuel cost,longer operating life,highly reliable and free from production of greenhouse gases.In this paper we analyzed the different topologies of DC–DC converter in terms of their operating region of MPPT,quality of input and output currents.We discussed the MPPT algorithms to address partial shading effects in SPV array,present state of the technology,factors affecting the performance of the system,efficiency improvements and identified the research gaps.Also,the economic feasibility analysis has been done for the real time scenario using the Homer Pro software.The estimation of total dynamic head and horse power calculation has been done to decide the total load capacity.The economic analysis results such as cumulative cash flow over project lifetime of 25 years are presented.It is observed that the capital investment requirement is$7,425 for installing Fronius PV system that has a nominal capacity of 2.47 kW and annualized savings will be$134.93.In the long-term perspective,the return on investment is−2.18%as per the present tariff plan.展开更多
This paper is about the optimized design and analysis of two solar water pumping systems in which one of the systems is designed with a battery bank and other with a cylindrical water tank for a selected site in Pakis...This paper is about the optimized design and analysis of two solar water pumping systems in which one of the systems is designed with a battery bank and other with a cylindrical water tank for a selected site in Pakistan. The design, sizing, cost analysis and steady state analysis of the proposed systems were done in HOMER and dynamic analysis of the designed system with battery bank was performed in MATLAB/Simulink. The simulations performed in HOMER involved proper mapping of the loads which helped to evaluate the PV panel requirement, inverter rating, batteries (in case of battery based solution), modeling of water tank as a deferrable load (in case of solution based of water tank) and detailed cost analysis for a life time of 25 years. To verify the design of the solar water pumping system with battery bank, a simulation in MATLAB/Simulink for study of dynamic behavior of the overall system was performed which involved mathematical modeling of a PV panel, buckboost converter, inverter, battery bank and motor/pump, a perturb and observe maximum power point tracking algorithm based control system. Analysis was conducted based on the economic results that indicate designed solar water pumping system with water tank would be a cheaper solution as compared to solar water pumping system with a battery bank. This work can be taken as a case study for the understanding and optimized designs of solar water pumping system with battery bank and with cylindrical tank in Pakistani conditions.展开更多
This paper investigates the operation and analysis of the photovoltaic water pumping system in detail. Power electronic controllers were designed and developed for the water pumping system using a boost converter alon...This paper investigates the operation and analysis of the photovoltaic water pumping system in detail. Power electronic controllers were designed and developed for the water pumping system using a boost converter along with an inverter followed by an induction motor pump set. The proposed system could be employed in agricultural irrigation under any operating condition of varying natures of solar irradiances and temperatures. The configuration and implementation of the system were described in detail. Further, the detailed method of analysis and simulation characteristics of such PV water pumping system was also presented. With the concern of shortage of fossil fuel, global warming and energy security, the proposed PV based water pumping significant demand of electricity agricultural sector. system can meet the and serve for the展开更多
The dynamics differential equations are constructed, and the initial conditions are also given. Simulation shows the following conclusions: The water pressure in cylinder has great instantaneous pulsation and phase s...The dynamics differential equations are constructed, and the initial conditions are also given. Simulation shows the following conclusions: The water pressure in cylinder has great instantaneous pulsation and phase step when outlet valve or inlet valve opens, but is more gently in other time; The volume efficiency is influenced by the output pressure slightly, and decreases as the working rotational speed increases; When the inherent frequency of the valves is integer multiple of the working frequency, the volume efficiency of system will decrease evidently.展开更多
Large water pump motor,whose operation decides the reliability of the whole production line,plays a very important role.Therefore,its online condition monitoring can help companies better know its operation,process fa...Large water pump motor,whose operation decides the reliability of the whole production line,plays a very important role.Therefore,its online condition monitoring can help companies better know its operation,process fault analysis and protection.The essay mainly studies and designs large water pump motor′s real time vibration monitoring and fault diagnosis system.The essay completes the systems project design,the establishment of the system and performance test.Eddy-currentsensor,XM-120 vibration module,XM-320 axial translation module,XM-362 temperature module,XM-360 process amount module and XM-500 gateway module are used to measure the axial vibration and displacement of main motors.Laboratory tests prove that the system can meet the requirements of motor vibration monitoring.展开更多
In the present work,an assessment of the rural water supply potential by mechanical wind pumping around the floodplains of Lake Chad has been considered.Inside the floodplains around Lake Chad,available surface water ...In the present work,an assessment of the rural water supply potential by mechanical wind pumping around the floodplains of Lake Chad has been considered.Inside the floodplains around Lake Chad,available surface water is largely contaminated and represents health hazards to populations.Access to underground and clean water has increasingly become rare.Moreover,clean water scarcity has led to conflict and territorial pressures,which are contributing factors to poverty in the considered area.Four localities,Baga,Baga-Sola,Makari and Nguigmi,respectively,in Nigeria,Chad,Cameroon and Niger have been selected inside the floodplains around Lake Chad,to evaluate the potential of wind power and prospects of windmills development to provide safe drinking-water supply,livestock watering and small-scale irrigation.Long-term satellite-derived data,obtained through the Prediction of Worldwide renewable Energy Resources have been considered suitable and viable alternative to missing site-specific data from ground stations.Windmill of Multi-blade driven piston pump is the preferred water pumping option for this study because of its higher overall system efficiency.The results of this study indicate that mean wind speeds,at 10 m height above ground level,are 4.64 m/s for Baga,4.76 m/s for Baga-Sola,4.32 m/s for Makari and 4.44 m/s for Nguigmi.In addition,wind speeds for Baga,for instance,are in the range of 2.5–10 m(working range of a wind pump),at 10,15,20 and 25 m height agl,for 79.64,82.80,84.79,and 86.19 per cent of the time.Corresponding values for Baga-Sola,Makari and Nguigmi are in the range of 80.50–87.76 per cent,76.86–85,58 per cent,77.92–86.21 per cent,respectively.For a Windmill with a 2 m-blade,a 25 m-height tower and considering a total dynamic head of 30 m,average monthly discharges for the dry season are 1,330,1,374,1,200 and 1,199 m3,respectively for Baga,Baga-Sola,Makari and Nguigmi.Furthermore,corresponding costs of water are 9.53,9.23,10.56 and 10.57 XAF/m3,for Baga,Baga-Sola,Makari and Nguigmi,in that order.展开更多
For surface defects in electronic water pump shells,the manual detection efficiency is low,prone to misdetection and leak detection,and encounters problems,such as uncertainty.To improve the speed and accuracy of surf...For surface defects in electronic water pump shells,the manual detection efficiency is low,prone to misdetection and leak detection,and encounters problems,such as uncertainty.To improve the speed and accuracy of surface defect detection,a lightweight detection method based on an improved YOLOv5s method is proposed to replace the traditional manual detection methods.In this method,the MobileNetV3 module replaces the backbone network of YOLOv5s,depth-separable convolution is introduced,the parameters and calculations are reduced,and CIoU_Loss is used as the loss function of the boundary box regression to improve its detection accuracy.A dataset of electronic pump shell defects is established,and the performance of the improved method is evaluated by comparing it with that of the original method.The results show that the parameters and FLOPs are reduced by 49.83%and 61.59%,respectively,compared with the original YOLOv5s model,and the detection accuracy is improved by 1.74%,which is an indication of the superiority of the improved method.To further verify the universality of the improved method,it is compared with the results using the original method on the PASCALVOC2007 dataset,which verifies that it yields better performance.In summary,the improved lightweight method can be used for the real-time detection of electronic water pump shell defects.展开更多
The demand for water pumping in urban water supply and irrigation in Bangladesh is significantly influenced by electricity deficits and high diesel costs. To address these challenges, the adoption of solar power for w...The demand for water pumping in urban water supply and irrigation in Bangladesh is significantly influenced by electricity deficits and high diesel costs. To address these challenges, the adoption of solar power for water pumping emerges as a viable alternative to traditional systems reliant on grid power and diesel. In recent years, there has been a growing emphasis on clean and renewable energies, aligning with the environmental and economic priorities of Bangladesh. The agricultural sector, serving as the backbone of the country’s economy, witnesses an escalating demand for water as the population increases. The extraction and transfer of water for agricultural and drinking purposes translate to high-energy consumption. Leveraging the abundant and essentially free solar energy, particularly during the crop growth periods when irrigation is crucial, presents an optimal solution. This study underscores the underutilization of this vital resource in Bangladesh and advocates for the widespread implementation of solar energy conversion programs, specifically in photovoltaic pumping systems. By comparing these systems with conventional diesel pumps, this paper aims to inspire policymakers, statesmen, and industry professionals to integrate green energy into the water sector. The envisioned outcome is a strategic shift towards sustainable development, with a focus on harnessing solar power to pump water for villages and agriculture, thus contributing to economic and environmental sustainability.展开更多
Intenal combustion pump (ICP) is a new type power device turning the thermal energy from fuel combustion into fluid pressure energy. Three cylinders prototype has just been developed. The study on the influence of v...Intenal combustion pump (ICP) is a new type power device turning the thermal energy from fuel combustion into fluid pressure energy. Three cylinders prototype has just been developed. The study on the influence of valve's characteristic on ICP's total performance will found the base for its optimum design. Based on the theoretical and testing fruits of single cylinder prototype, the performance of the valves and complete appliance of the latest is simulated. When the natural frequency of valves is approximately to the round number times of the working frequency, volumetric efficiency is seriously low. The nominal rotational speed of the prototype is nearly to the speed where the volumetric efficiency is lowest, which is harmful to the normal work of ICP, so further structure optimization of valves should be carried out. The change of volumetric efficiency has great influence on the fuel consumption rate, output flow, effective thermal efficiency, effective power, and so on, but little on output pressure.展开更多
Jordan has,</span><span style="font-family:""> </span><span style="font-family:"">to a satisfactory degree,</span><span style="font-family:"&quo...Jordan has,</span><span style="font-family:""> </span><span style="font-family:"">to a satisfactory degree,</span><span style="font-family:""> </span><span style="font-family:"">managed its scarce water resources, especially during the last few decades due to the regional conflicts and refugee waves hosted in the country since 1948.</span><span style="font-family:""> </span><span style="font-family:"">The waves of refugees in 1967, and after), returnees from the Gulf States 1991/92, during the first Gulf war), Lebanon (1970s and 1980s), Iraq (2003 and after, and lastly Syria (2011-2017 have</span><span style="font-family:""> </span><span style="font-family:"">as well</span><span style="font-family:""> </span><span style="font-family:"">severely impacted the management of water resources which has negatively impacted the water sector especially in terms of allocating new water resources to satisfy the needs of the country. In addition, shortsightedness of some water policy-makers has led to the deteriorations in the water resources quantitatively and qualitatively, which has resulted in social and economic discomfort of the population. In this article, the shortcomings in the water sector are addressed, such as setting an end to groundwater overexploitation, providing water to the population in a continuous way, improving water use efficiency in agricultural uses and the way forward is</span><span style="font-family:""> </span><span style="font-family:"">delineated</span><span style="font-family:""> </span><span style="font-family:"">based on a critical judgment of the actual situation of the water sector in order to reach at a more robust water sector with all its</span><span style="font-family:""> </span><span style="font-family:"">positive impacts on the social, economic and political life in the country.展开更多
A novel nanoscale watermill for the unidirectional transport of water molecules through a curved single-walled carbon nanotube(SWNT) is proposed and explored by molecular dynamics simulations. In this nanoscale syst...A novel nanoscale watermill for the unidirectional transport of water molecules through a curved single-walled carbon nanotube(SWNT) is proposed and explored by molecular dynamics simulations. In this nanoscale system, a revolving charge is introduced to drive a water chain confined inside the SWNT, the charge and the tube together serving as a nano waterwheel and nano engine. A resonance-like phenomenon is found, and the revolving frequency of the charge plays a key role in pumping the water chain. The water flux across the SWNT increases with respect to the revolving frequency of the external charge and it reaches its maximum when the frequency is 4 THz. Correspondingly, the number of hydrogen bonds in the water chain inside the SWNT decreases dramatically as the frequency increases from 4 THz to 25 THz. The mechanism behind the resonance phenomenon has been investigated systematically. Our findings are helpful for the design of nanoscale fluidic devices and energy converters.展开更多
The lack of water in arid and semi-arid regions has often limited agricultural production. Indeed, even where water is available for irrigation, the lack of electricity, as well as the high costs of diesel, has create...The lack of water in arid and semi-arid regions has often limited agricultural production. Indeed, even where water is available for irrigation, the lack of electricity, as well as the high costs of diesel, has created constraints on small farmers. The purpose of this research is to review the renewable energy potential available in arid and semi-arid zones that can be used for irrigation as a substitute for fossil fuels. In this review, the solar thermal irrigation, solar photovoltaic (PV) irrigation, wind pumping and biomass pumping are discussed. The comparison of different hybrid pumping systems and analyses of renewable sources irrigation assessment in arid and semi-arid regions of Mozambique also are discussed. The results of this study showed that there are still certain technological limitations regarding the use of solar thermal energy for irrigation. As far as wind power is concerned, the analysis of the pumping water life cycle cost showed that the wind power water pumping system is more economical and viable compared to the diesel based system. However, the study concluded that photovoltaic solar energy has been shown to be more viable for pumping water for irrigation in arid and semi-arid regions.展开更多
Deep Q Network(DQN)is an efficient model-free optimization method,and has the potential to be used in building cooling water systems.However,due to the high dimension of actions,this method requires a complex neural n...Deep Q Network(DQN)is an efficient model-free optimization method,and has the potential to be used in building cooling water systems.However,due to the high dimension of actions,this method requires a complex neural network.Therefore,both the required number of training samples and the length of convergence period are barriers for real application.Furthermore,penalty function based exploration may lead to unsafe actions,causing the application of this optimization method even more difficult.To solve these problems,an approach to limit the action space within a safe area is proposed in this paper.First of all,the action space for cooling towers and pumps are separated into two sub-regions.Secondly,for each type of equipment,the action space is further divided into safe and unsafe regions.As a result,the convergence speed is significantly improved.Compared with the traditional DQN method in a simulation environment validated by real data,the proposed method is able to save the convergence time by 1 episode(one cooling season).The results in this paper suggest that,the proposed DQN method can achieve a much quicker learning speed without any undesired consequences,and therefore is more suitable to be used in projects without pre-learning stage.展开更多
A new type of microchannel condenser applied in the air source heat pump water heater(ASHPWH)with cyclic heating was proposed in this study.The operating performance of the ASHPWH was frst tested.Then,the structure of...A new type of microchannel condenser applied in the air source heat pump water heater(ASHPWH)with cyclic heating was proposed in this study.The operating performance of the ASHPWH was frst tested.Then,the structure of the microchannel condenser was optimized with the implement of vortex generators.Finally,a numerical model of the ASHPWH was established and the optimized microchannel condenser was studied.The experimental results showed that the average coefficient of performance(COP)of the 1HP(735 W)ASHPWH reached 3.48.In addition,the optimized microchannel condenser could be matched with a 3 HP(2430W)ASHPWH with an average heating capacity of 10.30 kW,and achieving an average COP of 4.24,14.6%higher than the limit value in the national standard.展开更多
Based on energy conservation equation and Darcy's law, a model of beach well infiltration intake system applied in a seawater source heat pump system was established. The model consists of the seawater seepage and th...Based on energy conservation equation and Darcy's law, a model of beach well infiltration intake system applied in a seawater source heat pump system was established. The model consists of the seawater seepage and the heat transfer process. A porous medium model in a software named FLUENT was applied to simulate the seepage and the heat transfer process. This model was also validated by field experiment conducted on the seashore in Tianjin, China. The maximum relative error between simulation results and experimental results was 2.1% (less than 5%), which was acceptable in engineering applica- tion. The porosity and coefficient of thermal conductivity of the aquifer soil were determined to be 0.49 W/(m. K) and 1.46W/(m.K), respectively in the simulation. In addition, the influencing factors of pumping water of beach well were also analyzed. The pumping water was found to increase when the distance between the beach well and the impervious boundary becomes longer, when the distance between the beach well and the supplying water source shortens, when the diameter of the beach well enlarges, and the drawdown enlarges.展开更多
In this paper,a photovoltaic(PV)fed boost inverter-based permanent-magnet synchronous motor(PMSM)-driven water-pumping system for stand-alone applications is proposed.The proposed system comprises PV panel,six switche...In this paper,a photovoltaic(PV)fed boost inverter-based permanent-magnet synchronous motor(PMSM)-driven water-pumping system for stand-alone applications is proposed.The proposed system comprises PV panel,six switches,three inductors(L),three capacitors(C)and a water pump.In this work,the boost inverter is designed with a gain of two and thereby the direct current input required to run the motor is considerably reduced.Hence,the size of the system is reduced.The voltage gain factor depends upon the placement of the L and C components and their values.The speed reference is generated using a perturb and observe maximum power point tracking algorithm.Vector control is employed to control a boost inverter-fed PMSM drive.The proposed system is simulated using a MATLAB®/Simulink®environment and experimental validation is performed on a PMSM laboratory prototype using a field programmable gate array controller.The simulation and experimental results demonstrate the effectiveness of the proposed system.展开更多
Water is an essential resource for agriculture and the majority of land is irrigated through borewells or wells.The power requirement for an irrigation pump motor is fed by the on-grid power supply but the availabilit...Water is an essential resource for agriculture and the majority of land is irrigated through borewells or wells.The power requirement for an irrigation pump motor is fed by the on-grid power supply but the availability of electricity in rural areas is still questionable.With rising concerns about global warming and the rise in carbon footprints,it is necessary to choose clean and green energy,thereby attaining self-sustainable life.India receives yearly a mean solar irradiation of 6.5 kWh/m^(2)day.Hence,a solar photovoltaic-water-pumping system(SPV-WPS)is a suitable alternative to grid energy;thereby,the farmers would generate electricity through the solar photovoltaic system and become self-sufficient in their energy needs.In this paper,two different agricultural fields in Tamil Nadu,India that deploy flood irrigation and drip irrigation are taken as a case study.The paper discusses the concerns on the use of grid power and their carbon footprint,design and simulation of 4-and 5.5-kW SPV-WPSs using PVsyst 7.1.1,and the advantages of using SPV-WPSs and life-cycle cost analysis on different use cases.The Government of India has introduced a special scheme to promote the installation of SPV-WPSs by offering attractive incentives through PM-Kisan Urja Suraksha evam Utthaan Mahabhiyan(KUSUM)yojana.The results of the case study show that with the use of SPV-WPSs,either with or without subsidy,the farmer could gain a minimum of 250%on the investment with a project lifetime of 25 years.展开更多
The studies on predicting the energy consumption of air conditioning systems are meaningful to building energy conservation and management. Generally, the more comprehensive the building information is, the easier the...The studies on predicting the energy consumption of air conditioning systems are meaningful to building energy conservation and management. Generally, the more comprehensive the building information is, the easier the prediction model can be developed. However, it is very difficult to get detailed information about existing/old buildings (information-poor buildings), it is a big challenge to predict the energy consumption accurately by limited information. This study aims to predict the electricity consumption of the water source heat pump system of an office building based on meteorological data. The key variables are selected by error analysis and sensitivity analysis, and the effects of each variable on the models’ prediction performance can be obtained. Besides, the prediction models are established by support vector regression algorithm and trained by the local meteorological data. The results show that the positive and negative variables can be identified, and these positive variables are responsible for more than 70% of the total importance. Moreover, the root mean square error falls to 4.6044 from 7.8227 and the relative square error falls to 0.1494 from 0.4313 when the negative inputs are removed. And the errors reduce further to 4.1160 and 0.1194 by parameter optimization.展开更多
The basic structure and working principle of an unequal-arm buoyancy balance are introduced in this article. Different kinds of error produeed in the unequal-arm buoyancy balance has been researched and analyzed. Firs...The basic structure and working principle of an unequal-arm buoyancy balance are introduced in this article. Different kinds of error produeed in the unequal-arm buoyancy balance has been researched and analyzed. First the temperature influence of the crossbeam is analyzed, then the measurement error is calculated; second, the error produced by the pivot and the counterweight system is analyzed, then the corresponding error reduction method is proposed. It is shown that the error reduction method can promote the precision of the buoyancy, which is critical to balance.展开更多
文摘The energy efficient product can be operated with longer duration.They offer wonderful solutions compared to other conventional water pumping system as it needs less maintenance,simple in installation,zero fuel cost,longer operating life,highly reliable and free from production of greenhouse gases.In this paper we analyzed the different topologies of DC–DC converter in terms of their operating region of MPPT,quality of input and output currents.We discussed the MPPT algorithms to address partial shading effects in SPV array,present state of the technology,factors affecting the performance of the system,efficiency improvements and identified the research gaps.Also,the economic feasibility analysis has been done for the real time scenario using the Homer Pro software.The estimation of total dynamic head and horse power calculation has been done to decide the total load capacity.The economic analysis results such as cumulative cash flow over project lifetime of 25 years are presented.It is observed that the capital investment requirement is$7,425 for installing Fronius PV system that has a nominal capacity of 2.47 kW and annualized savings will be$134.93.In the long-term perspective,the return on investment is−2.18%as per the present tariff plan.
文摘This paper is about the optimized design and analysis of two solar water pumping systems in which one of the systems is designed with a battery bank and other with a cylindrical water tank for a selected site in Pakistan. The design, sizing, cost analysis and steady state analysis of the proposed systems were done in HOMER and dynamic analysis of the designed system with battery bank was performed in MATLAB/Simulink. The simulations performed in HOMER involved proper mapping of the loads which helped to evaluate the PV panel requirement, inverter rating, batteries (in case of battery based solution), modeling of water tank as a deferrable load (in case of solution based of water tank) and detailed cost analysis for a life time of 25 years. To verify the design of the solar water pumping system with battery bank, a simulation in MATLAB/Simulink for study of dynamic behavior of the overall system was performed which involved mathematical modeling of a PV panel, buckboost converter, inverter, battery bank and motor/pump, a perturb and observe maximum power point tracking algorithm based control system. Analysis was conducted based on the economic results that indicate designed solar water pumping system with water tank would be a cheaper solution as compared to solar water pumping system with a battery bank. This work can be taken as a case study for the understanding and optimized designs of solar water pumping system with battery bank and with cylindrical tank in Pakistani conditions.
文摘This paper investigates the operation and analysis of the photovoltaic water pumping system in detail. Power electronic controllers were designed and developed for the water pumping system using a boost converter along with an inverter followed by an induction motor pump set. The proposed system could be employed in agricultural irrigation under any operating condition of varying natures of solar irradiances and temperatures. The configuration and implementation of the system were described in detail. Further, the detailed method of analysis and simulation characteristics of such PV water pumping system was also presented. With the concern of shortage of fossil fuel, global warming and energy security, the proposed PV based water pumping significant demand of electricity agricultural sector. system can meet the and serve for the
基金This project is supported by National Natural Science Foundation of China(No.10342003).
文摘The dynamics differential equations are constructed, and the initial conditions are also given. Simulation shows the following conclusions: The water pressure in cylinder has great instantaneous pulsation and phase step when outlet valve or inlet valve opens, but is more gently in other time; The volume efficiency is influenced by the output pressure slightly, and decreases as the working rotational speed increases; When the inherent frequency of the valves is integer multiple of the working frequency, the volume efficiency of system will decrease evidently.
文摘Large water pump motor,whose operation decides the reliability of the whole production line,plays a very important role.Therefore,its online condition monitoring can help companies better know its operation,process fault analysis and protection.The essay mainly studies and designs large water pump motor′s real time vibration monitoring and fault diagnosis system.The essay completes the systems project design,the establishment of the system and performance test.Eddy-currentsensor,XM-120 vibration module,XM-320 axial translation module,XM-362 temperature module,XM-360 process amount module and XM-500 gateway module are used to measure the axial vibration and displacement of main motors.Laboratory tests prove that the system can meet the requirements of motor vibration monitoring.
文摘In the present work,an assessment of the rural water supply potential by mechanical wind pumping around the floodplains of Lake Chad has been considered.Inside the floodplains around Lake Chad,available surface water is largely contaminated and represents health hazards to populations.Access to underground and clean water has increasingly become rare.Moreover,clean water scarcity has led to conflict and territorial pressures,which are contributing factors to poverty in the considered area.Four localities,Baga,Baga-Sola,Makari and Nguigmi,respectively,in Nigeria,Chad,Cameroon and Niger have been selected inside the floodplains around Lake Chad,to evaluate the potential of wind power and prospects of windmills development to provide safe drinking-water supply,livestock watering and small-scale irrigation.Long-term satellite-derived data,obtained through the Prediction of Worldwide renewable Energy Resources have been considered suitable and viable alternative to missing site-specific data from ground stations.Windmill of Multi-blade driven piston pump is the preferred water pumping option for this study because of its higher overall system efficiency.The results of this study indicate that mean wind speeds,at 10 m height above ground level,are 4.64 m/s for Baga,4.76 m/s for Baga-Sola,4.32 m/s for Makari and 4.44 m/s for Nguigmi.In addition,wind speeds for Baga,for instance,are in the range of 2.5–10 m(working range of a wind pump),at 10,15,20 and 25 m height agl,for 79.64,82.80,84.79,and 86.19 per cent of the time.Corresponding values for Baga-Sola,Makari and Nguigmi are in the range of 80.50–87.76 per cent,76.86–85,58 per cent,77.92–86.21 per cent,respectively.For a Windmill with a 2 m-blade,a 25 m-height tower and considering a total dynamic head of 30 m,average monthly discharges for the dry season are 1,330,1,374,1,200 and 1,199 m3,respectively for Baga,Baga-Sola,Makari and Nguigmi.Furthermore,corresponding costs of water are 9.53,9.23,10.56 and 10.57 XAF/m3,for Baga,Baga-Sola,Makari and Nguigmi,in that order.
基金This work is supported by the Qing Lan Project of the Higher Education Institutions of Jiangsu Province,the 2022 Jiangsu Science and Technology Plan Special Fund(International Science and Technology Cooperation)(BZ2022029).
文摘For surface defects in electronic water pump shells,the manual detection efficiency is low,prone to misdetection and leak detection,and encounters problems,such as uncertainty.To improve the speed and accuracy of surface defect detection,a lightweight detection method based on an improved YOLOv5s method is proposed to replace the traditional manual detection methods.In this method,the MobileNetV3 module replaces the backbone network of YOLOv5s,depth-separable convolution is introduced,the parameters and calculations are reduced,and CIoU_Loss is used as the loss function of the boundary box regression to improve its detection accuracy.A dataset of electronic pump shell defects is established,and the performance of the improved method is evaluated by comparing it with that of the original method.The results show that the parameters and FLOPs are reduced by 49.83%and 61.59%,respectively,compared with the original YOLOv5s model,and the detection accuracy is improved by 1.74%,which is an indication of the superiority of the improved method.To further verify the universality of the improved method,it is compared with the results using the original method on the PASCALVOC2007 dataset,which verifies that it yields better performance.In summary,the improved lightweight method can be used for the real-time detection of electronic water pump shell defects.
文摘The demand for water pumping in urban water supply and irrigation in Bangladesh is significantly influenced by electricity deficits and high diesel costs. To address these challenges, the adoption of solar power for water pumping emerges as a viable alternative to traditional systems reliant on grid power and diesel. In recent years, there has been a growing emphasis on clean and renewable energies, aligning with the environmental and economic priorities of Bangladesh. The agricultural sector, serving as the backbone of the country’s economy, witnesses an escalating demand for water as the population increases. The extraction and transfer of water for agricultural and drinking purposes translate to high-energy consumption. Leveraging the abundant and essentially free solar energy, particularly during the crop growth periods when irrigation is crucial, presents an optimal solution. This study underscores the underutilization of this vital resource in Bangladesh and advocates for the widespread implementation of solar energy conversion programs, specifically in photovoltaic pumping systems. By comparing these systems with conventional diesel pumps, this paper aims to inspire policymakers, statesmen, and industry professionals to integrate green energy into the water sector. The envisioned outcome is a strategic shift towards sustainable development, with a focus on harnessing solar power to pump water for villages and agriculture, thus contributing to economic and environmental sustainability.
基金supported by National Natural Science Foundation of China (Grant No. 50575107)
文摘Intenal combustion pump (ICP) is a new type power device turning the thermal energy from fuel combustion into fluid pressure energy. Three cylinders prototype has just been developed. The study on the influence of valve's characteristic on ICP's total performance will found the base for its optimum design. Based on the theoretical and testing fruits of single cylinder prototype, the performance of the valves and complete appliance of the latest is simulated. When the natural frequency of valves is approximately to the round number times of the working frequency, volumetric efficiency is seriously low. The nominal rotational speed of the prototype is nearly to the speed where the volumetric efficiency is lowest, which is harmful to the normal work of ICP, so further structure optimization of valves should be carried out. The change of volumetric efficiency has great influence on the fuel consumption rate, output flow, effective thermal efficiency, effective power, and so on, but little on output pressure.
文摘Jordan has,</span><span style="font-family:""> </span><span style="font-family:"">to a satisfactory degree,</span><span style="font-family:""> </span><span style="font-family:"">managed its scarce water resources, especially during the last few decades due to the regional conflicts and refugee waves hosted in the country since 1948.</span><span style="font-family:""> </span><span style="font-family:"">The waves of refugees in 1967, and after), returnees from the Gulf States 1991/92, during the first Gulf war), Lebanon (1970s and 1980s), Iraq (2003 and after, and lastly Syria (2011-2017 have</span><span style="font-family:""> </span><span style="font-family:"">as well</span><span style="font-family:""> </span><span style="font-family:"">severely impacted the management of water resources which has negatively impacted the water sector especially in terms of allocating new water resources to satisfy the needs of the country. In addition, shortsightedness of some water policy-makers has led to the deteriorations in the water resources quantitatively and qualitatively, which has resulted in social and economic discomfort of the population. In this article, the shortcomings in the water sector are addressed, such as setting an end to groundwater overexploitation, providing water to the population in a continuous way, improving water use efficiency in agricultural uses and the way forward is</span><span style="font-family:""> </span><span style="font-family:"">delineated</span><span style="font-family:""> </span><span style="font-family:"">based on a critical judgment of the actual situation of the water sector in order to reach at a more robust water sector with all its</span><span style="font-family:""> </span><span style="font-family:"">positive impacts on the social, economic and political life in the country.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.11005093 and 61274099)the Research Fund of Education Department of Zhejiang Province,China(Grant No.Y201223336)+2 种基金the Zhejiang Provincial Science and Technology Key Innovation Team,China(Grant No.2011R50012)the Key Laboratory of Zhejiang Province,China(Grant No.2013E10022)the Hong Kong Polytechnic University,China(Grant No.G-YL41)
文摘A novel nanoscale watermill for the unidirectional transport of water molecules through a curved single-walled carbon nanotube(SWNT) is proposed and explored by molecular dynamics simulations. In this nanoscale system, a revolving charge is introduced to drive a water chain confined inside the SWNT, the charge and the tube together serving as a nano waterwheel and nano engine. A resonance-like phenomenon is found, and the revolving frequency of the charge plays a key role in pumping the water chain. The water flux across the SWNT increases with respect to the revolving frequency of the external charge and it reaches its maximum when the frequency is 4 THz. Correspondingly, the number of hydrogen bonds in the water chain inside the SWNT decreases dramatically as the frequency increases from 4 THz to 25 THz. The mechanism behind the resonance phenomenon has been investigated systematically. Our findings are helpful for the design of nanoscale fluidic devices and energy converters.
文摘The lack of water in arid and semi-arid regions has often limited agricultural production. Indeed, even where water is available for irrigation, the lack of electricity, as well as the high costs of diesel, has created constraints on small farmers. The purpose of this research is to review the renewable energy potential available in arid and semi-arid zones that can be used for irrigation as a substitute for fossil fuels. In this review, the solar thermal irrigation, solar photovoltaic (PV) irrigation, wind pumping and biomass pumping are discussed. The comparison of different hybrid pumping systems and analyses of renewable sources irrigation assessment in arid and semi-arid regions of Mozambique also are discussed. The results of this study showed that there are still certain technological limitations regarding the use of solar thermal energy for irrigation. As far as wind power is concerned, the analysis of the pumping water life cycle cost showed that the wind power water pumping system is more economical and viable compared to the diesel based system. However, the study concluded that photovoltaic solar energy has been shown to be more viable for pumping water for irrigation in arid and semi-arid regions.
文摘Deep Q Network(DQN)is an efficient model-free optimization method,and has the potential to be used in building cooling water systems.However,due to the high dimension of actions,this method requires a complex neural network.Therefore,both the required number of training samples and the length of convergence period are barriers for real application.Furthermore,penalty function based exploration may lead to unsafe actions,causing the application of this optimization method even more difficult.To solve these problems,an approach to limit the action space within a safe area is proposed in this paper.First of all,the action space for cooling towers and pumps are separated into two sub-regions.Secondly,for each type of equipment,the action space is further divided into safe and unsafe regions.As a result,the convergence speed is significantly improved.Compared with the traditional DQN method in a simulation environment validated by real data,the proposed method is able to save the convergence time by 1 episode(one cooling season).The results in this paper suggest that,the proposed DQN method can achieve a much quicker learning speed without any undesired consequences,and therefore is more suitable to be used in projects without pre-learning stage.
基金the National Natural Science Foundation of China(No.51776117)。
文摘A new type of microchannel condenser applied in the air source heat pump water heater(ASHPWH)with cyclic heating was proposed in this study.The operating performance of the ASHPWH was frst tested.Then,the structure of the microchannel condenser was optimized with the implement of vortex generators.Finally,a numerical model of the ASHPWH was established and the optimized microchannel condenser was studied.The experimental results showed that the average coefficient of performance(COP)of the 1HP(735 W)ASHPWH reached 3.48.In addition,the optimized microchannel condenser could be matched with a 3 HP(2430W)ASHPWH with an average heating capacity of 10.30 kW,and achieving an average COP of 4.24,14.6%higher than the limit value in the national standard.
基金This work was supported by the National Natural Science Foundation of China (Grant No. 51106110).
文摘Based on energy conservation equation and Darcy's law, a model of beach well infiltration intake system applied in a seawater source heat pump system was established. The model consists of the seawater seepage and the heat transfer process. A porous medium model in a software named FLUENT was applied to simulate the seepage and the heat transfer process. This model was also validated by field experiment conducted on the seashore in Tianjin, China. The maximum relative error between simulation results and experimental results was 2.1% (less than 5%), which was acceptable in engineering applica- tion. The porosity and coefficient of thermal conductivity of the aquifer soil were determined to be 0.49 W/(m. K) and 1.46W/(m.K), respectively in the simulation. In addition, the influencing factors of pumping water of beach well were also analyzed. The pumping water was found to increase when the distance between the beach well and the impervious boundary becomes longer, when the distance between the beach well and the supplying water source shortens, when the diameter of the beach well enlarges, and the drawdown enlarges.
文摘In this paper,a photovoltaic(PV)fed boost inverter-based permanent-magnet synchronous motor(PMSM)-driven water-pumping system for stand-alone applications is proposed.The proposed system comprises PV panel,six switches,three inductors(L),three capacitors(C)and a water pump.In this work,the boost inverter is designed with a gain of two and thereby the direct current input required to run the motor is considerably reduced.Hence,the size of the system is reduced.The voltage gain factor depends upon the placement of the L and C components and their values.The speed reference is generated using a perturb and observe maximum power point tracking algorithm.Vector control is employed to control a boost inverter-fed PMSM drive.The proposed system is simulated using a MATLAB®/Simulink®environment and experimental validation is performed on a PMSM laboratory prototype using a field programmable gate array controller.The simulation and experimental results demonstrate the effectiveness of the proposed system.
文摘Water is an essential resource for agriculture and the majority of land is irrigated through borewells or wells.The power requirement for an irrigation pump motor is fed by the on-grid power supply but the availability of electricity in rural areas is still questionable.With rising concerns about global warming and the rise in carbon footprints,it is necessary to choose clean and green energy,thereby attaining self-sustainable life.India receives yearly a mean solar irradiation of 6.5 kWh/m^(2)day.Hence,a solar photovoltaic-water-pumping system(SPV-WPS)is a suitable alternative to grid energy;thereby,the farmers would generate electricity through the solar photovoltaic system and become self-sufficient in their energy needs.In this paper,two different agricultural fields in Tamil Nadu,India that deploy flood irrigation and drip irrigation are taken as a case study.The paper discusses the concerns on the use of grid power and their carbon footprint,design and simulation of 4-and 5.5-kW SPV-WPSs using PVsyst 7.1.1,and the advantages of using SPV-WPSs and life-cycle cost analysis on different use cases.The Government of India has introduced a special scheme to promote the installation of SPV-WPSs by offering attractive incentives through PM-Kisan Urja Suraksha evam Utthaan Mahabhiyan(KUSUM)yojana.The results of the case study show that with the use of SPV-WPSs,either with or without subsidy,the farmer could gain a minimum of 250%on the investment with a project lifetime of 25 years.
基金This work was supported by the National Natural Science Foundation of China(No.51876070,No.51576074).
文摘The studies on predicting the energy consumption of air conditioning systems are meaningful to building energy conservation and management. Generally, the more comprehensive the building information is, the easier the prediction model can be developed. However, it is very difficult to get detailed information about existing/old buildings (information-poor buildings), it is a big challenge to predict the energy consumption accurately by limited information. This study aims to predict the electricity consumption of the water source heat pump system of an office building based on meteorological data. The key variables are selected by error analysis and sensitivity analysis, and the effects of each variable on the models’ prediction performance can be obtained. Besides, the prediction models are established by support vector regression algorithm and trained by the local meteorological data. The results show that the positive and negative variables can be identified, and these positive variables are responsible for more than 70% of the total importance. Moreover, the root mean square error falls to 4.6044 from 7.8227 and the relative square error falls to 0.1494 from 0.4313 when the negative inputs are removed. And the errors reduce further to 4.1160 and 0.1194 by parameter optimization.
基金supported by the Education Fund in Hunan Province under Grant No.07D014
文摘The basic structure and working principle of an unequal-arm buoyancy balance are introduced in this article. Different kinds of error produeed in the unequal-arm buoyancy balance has been researched and analyzed. First the temperature influence of the crossbeam is analyzed, then the measurement error is calculated; second, the error produced by the pivot and the counterweight system is analyzed, then the corresponding error reduction method is proposed. It is shown that the error reduction method can promote the precision of the buoyancy, which is critical to balance.