Superwetting Ag/α-Fe_(2)O_(3) anchored mesh with enhanced photocatalytic and antibacterial activities for efficient water purification

Superwetting materials have drawn unprecedented attention in the treatment of oily wastewater due to their preferable anti-fouling property and selective oil/water separation.However,it is still a challenge to fabricate multifunctional and environmentally friendly materials,which can be stably applied to purify the actual complicated wastewater.Here,a Ag/Ag/α-Fe_(2)O_(3) heterostructure anchored copper mesh was intentionally synthesized using a facile two-step hydrothermal method.The resultant mesh with superhydrophilicity and underwater superoleophobicity was capable of separating various oil/water mixtures with superior separation efficiency and high permeationflux driven by gravity.Benefiting from the joint effects of the smaller band gap of Ag/α-Fe_(2)O_(3) heterojunction,inherent antibacterial capacity of Ag/α-Fe_(2)O_(3) and Ag nanoparticles,favorable conductive substrate,as well as the hierarchical structure with superwettability,such mesh presented remarkably enhanced degradation capability toward organic dyes under visible light irradiation and antibacterial activity against both Escherichia coli(E.coli)and Staphylococcus aureus(S.aureus)compared with the pure Ag/α-Fe_(2)O_(3) coated mesh.Impressively,the mesh exhibited bifunctional water purification performance,in which organic dyes were eliminated simultaneously from water during oil/water separation in onefiltration process.More importantly,this mesh behaved exceptional chemical resistance,mechanical stability and long-term reusability.Therefore,this material with multifunctional integration may hold promising potential for steady water purification in practice.

Polysulfide nanoparticles-reduced graphene oxide composite aerogel for efficient solar-driven water purification

Along with the environmental pollution, the scarcity of clean water seriously threatens the sustainable development of human society.Recently, the rapid development of solar evaporators has injected new vitality into the field of water purification. However, the industry faces a considerable challenge of achieving comprehensive purification of ions, especially the efficient removal of mercury ions. In this work, we introduce an ideal mercury-removal platform based on facilely and cost-effectively synthesized polysulfide nanoparticles(PSNs). Further development of PSN-functionalized reduced graphene oxide(PSN-rGO) aerogel evaporator results in achieving a high evaporation rate of 1.55 kg m^(-2)h^(-1)with energy efficiency of 90.8% under 1 sun. With the merits of interconnected porous structure and adsorption ability, the photothermal aerogel presents overall purification of heavy metal ions from wastewater. During solar desalination, salt ions can be rejected with long-term stability. Compared with traditional water purification technologies, this highly efficient solar evaporator provides a new practical method to utilize clean energy for clean water production.

MOF-Like 3D Graphene-Based Catalytic Membrane Fabricated by One-Step Laser Scribing for Robust Water Purification and Green Energy Production

Increasing both clean water and green energy demands for survival and development are the grand challenges of our age.Here,we successfully fabricate a novel multifunctional 3D graphene-based catalytic membrane(3D-GCM)with active metal nanoparticles(AMNs)loading for simultaneously obtaining the water purification and clean energy generation,via a“green”one-step laser scribing technology.The as-prepared 3D-GCM shows high porosity and uniform distribution with AMNs,which exhibits high permeated fluxes(over 100 L m^(−2) h^(−1))and versatile super-adsorption capacities for the removal of tricky organic pollutants from wastewater under ultra-low pressure-driving(0.1 bar).After adsorption saturating,the AMNs in 3D-GCM actuates the advanced oxidization process to self-clean the fouled membrane via the catalysis,and restores the adsorption capacity well for the next time membrane separation.Most importantly,the 3D-GCM with the welding of laser scribing overcomes the lateral shear force damaging during the long-term separation.Moreover,the 3D-GCM could emit plentiful of hot electrons from AMNs under light irradiation,realizing the membrane catalytic hydrolysis reactions for hydrogen energy generation.This“green”precision manufacturing with laser scribing technology provides a feasible technology to fabricate high-efficient and robust 3D-GCM microreactor in the tricky wastewater purification and sustainable clean energy production as well.

Green Liver Systems for Water Purification:Using the Phytoremediation Potential of Aquatic Macrophytes for the Removal of Different Cyanobacterial Toxins from Water

The protection and reasonable use of freshwater is one of the main goals for our future, as water is most important for all organisms on earth including humans. Due to pollution, not only with xenobiotics, but also with nutrients, the status of our water bodies has changed drastically. Excess nutrient load induces eutrophication processes and, as a result, massive cyanobacterial blooms during the summer times. As cyanobacteria are known to produce several toxic secondary metabolites, the so-called cyanotoxins, exhibiting hepato-, neuro- and cell-toxicity, a potential risk is given, when using this water. There is an urgent need to have a water purification system, which is able to cope with these natural toxins. Using aquatic plants as a Green Liver, the Green Liver System?, was developed, able to remove these natural pollutants. To test the ability of the Green Liver System?, several cyanobacterial toxins including artificial and natural mixtures were tested in a small-scale laboratory system. The results showed that within 7 - 14 days a combination of different aquatic macrophytes was able to remove a given toxin amount (10 μg·L-1) by 100%. The phytoremediation technology behind the Green Liver Systems? uses the simple ability of submerged aquatic plants to uptake, detoxify and store the toxins, without formation and release of further metabolites to the surrounding water.

Boron and nitrogen co-doped porous carbon derived from sodium alginate enhanced capacitive deionization for water purification

Capacitive deionization can alleviate water shortage and water environmental pollution, but performances are greatly determined by the electrochemical and desalination properties of its electrode materials. In this work, B and N co-doped porous carbon with micro-mesoporous structures is derived from sodium alginate by a carbonization, activation, and hydrothermal doping process, which exhibits large specific surface area (2587 m^(2)·g^(‒1)) and high specific capacitance (190.7 F·g^(‒1)) for adsorption of salt ions and heavy metal ions. Furthermore, the materials provide a desalination capacity of 26.9 mg·g−1 at 1.2 V in 500 mg·L^(‒1) NaCl solution as well as a high removal capacity (239.6 mg·g^(‒1)) and adsorption rate (7.99 mg·g^(‒1)·min^(‒1)) for Pb2+ with an excellent cycle stability. This work can pave the way to design low-cost porous carbon with high-performances for removal of salt ions and heavy metal ions.

A hybrid fuel cell for water purification and simultaneously electricity generation

The development of highly efficient energy conversion technologies to extract energy from wastewater is urgently needed,especially in facing of increasing energy and environment burdens.Here,we successfully fabricated a novel hybrid fuel cell with BiOCl-NH_(4)PTA as photocatalyst.The polyoxometalate(NH_(4)PTA)act as the acceptor of photoelectrons and could retard the recombination of photogenerated electrons and holes,which lead to superior photocatalytic degradation.By utilizing BiOCl-NH_(4)PTA as photocatalysts and Pt/C air-cathode,we successfully constructed an electron and mass transfer enhanced photocatalytic hybrid fuel cell with flow-through field(F-HFC).In this novel fuel cell,dyes and biomass could be directly degraded and stable power output could be obtained.About 87%of dyes could be degraded in 30 min irradiation and nearly 100%removed within 90 min.The current density could reach up to~267.1μA/cm^(2);with maximum power density(Pmax)of~16.2μW/cm^(2) with Rhodamine B as organic pollutant in F-HFC.The power densities were 9.0μW/cm^(2),12.2μW/cm^(2),and 13.9μW/cm^(2) when using methyl orange(MO),glucose and starch as substrates,respectively.This hybrid fuel cell with BiOCl-NH_(4)PTA composite fulfills the purpose of decontamination of aqueous organic pollutants and synchronous electricity generation.Moreover,the novel design cell with separated photodegradation unit and the electricity generation unit could bring potential practical application in water purification and energy recovery from wastewater.

Zinc oxide nano-enabled microfluidic reactor for water purification and its applicability to volatile organic compounds

This paper reports fast and efficient chemical decontamination of water within a tree-branched centimeter-scale microfluidic reactor.The microreactor integrates Zinc oxide nanowires(ZnO NWs)in situ grown acting as an efficient photocatalytic nanomaterial layer.Direct growth of ZnO NWs within the microfluidic chamber brings this photocatalytic medium at the very close vicinity of the water flow path,hence minimizing the required interaction time to produce efficient purification performance.We demonstrate a degradation efficiency of 95%in o5 s of residence time in one-pass only.According to our estimates,it becomes attainable using microfluidic reactors to produce decontamination of merely 1 l of water per day,typical of the human daily drinking water needs.To conduct our experiments,we have chosen a laboratory-scale case study as a seed for addressing the health concern of water contamination by volatile organic compounds(VOCs),which remain difficult to remove using alternative decontamination techniques,especially those involving water evaporation.The contaminated water sample contains mixture of five pollutants:Benzene;Toluene;Ethylbenzene;m–p Xylenes;and o-Xylene(BTEX)diluted in water at 10 p.p.m.concentration of each.Degradation was analytically monitored in a selective manner until it falls below 1 p.p.m.for each of the five pollutants,corresponding to the maximum contaminant level(MCL)established by the US Environmental Protection Agency(EPA).We also report on a preliminary study,investigating the nature of the chemical by-products after the photocatalytic VOCs degradation process.

Research on Ecological Water Cycle and Purification in Rural Landscape——Take Zhangjia Village Ecological Wastewater Treatment Project in Henan Province as an Example

Rural landscape is not only a natural landscape,but also a cultural landscape.The improvement of rural environment in Lushi County is carried out under the background of“Building Beautiful Villages”.Through the plan of environmental improvement,the appearance of villages in rural areas will be significantly improved,and the gap between urban and rural areas will be shortened.This research addresses the problems of scarce water resources,imperfect rainwater collection facilities,and increased environmental pollution in rural areas,and explores a flexible,effective,and integrated landscape ecological water treatment system that integrates with natural ecosystems.The practice has shown that the flexible combination of different technical measures according to local conditions and the construction of ecological water self-circulation and self-purification systems can reduce maintenance costs and achieve sustainable landscape.The virtuous cycle of the revetment’s micro-ecology greatly improves the environmental carrying capacity of the landscape.Reasonable water management system is more flexible in dealing with unexpected problems.The thesis proposes landscape design strategies for water circulation and water purification in rural areas,and applies them to actual design cases.It attempts to introduce a combined treatment system to achieve a more diverse landscape concept and further explore the healthy and sustainable development of rural water environment.

Bioinspired and biomimetic membranes for water purification and chemical separation: A review

Bioinspired and biomimetic membranes that contain biological transport channels or attain their structural designs from biological systems have been through a remarkable development over the last two decades.They take advantage of the exceptional transport properties of those channels,thus possess both high permeability and selectivity,and have emerged as a promising solution to existing membranes.Since the discovery of biological water channel proteins aquaporins(AQPs),extensive efforts have been made to utilize them to make separation membranes–AQP-based membranes,which have been commercialized.The exploration of AQPs’unique structures and transport properties has resulted in the evolution of biomimetic separation materials from protein-based to artificial channelbased membranes.However,large-scale,defect-free biomimetic membranes are not available yet.This paper reviews the state-of-the-art biomimetic membranes and summarizes the latest research progress,platform,and methodology.Then it critically discusses the potential routes of this emerging area toward scalable applications.We conclude that an appropriate combination of bioinspired concepts and molecular engineering with mature polymer industry may lead to scalable polymeric membranes with intrinsic selective channels,which will gain the merit of both desired selectivity and scalability.

Electrochemical reduction of Cr(Ⅵ)in the presence of sodium alginate and its application in water purification

Chromium(Cr)is used in many manufacturing processes,and its release into natural waters is a major environmental problem today.Low concentrations of Cr(Ⅵ)are toxic to human health and living organisms due to the carcinogenic and mutagenic nature of this mineral.This work examined the conversion of Cr(Ⅵ)to Cr(Ⅲ)via electrochemical reduction using gold electrode in an acidic sodium alginate(SA)solution and subsequent removal of the produced Cr(Ⅲ)-SA by the polymer-enhanced ultrafiltration(PEUF)technique.A solution of SA in nitric acid was used both as an electrolytic medium during the voltammetric measurements and bulk electrolysis and as an extracting agent during the PEUF technique.The electroanalysis of Cr(Ⅵ)was performed by linear sweep voltammetry in the presence of acidic SA solution to study its voltammetric behavior as a function of the Cr(Ⅵ)concentration,pH,presence of Cr(Ⅲ),SA concentration and scan rate.In addition,the quantitative reduction of Cr(Ⅵ)to Cr(Ⅲ)was studied through the bulk electrolysis technique.The results showed efficient reduction with well-defined peaks at approximately 0.3 V vs.Ag/AgCl,using a gold working electrode.As the pH increased,the reduction signal strongly decreased until its disappearance.The optimum SA concentration was 10 mmol/L,and it was observed that the presence of Cr(Ⅲ)did not interfere in the Cr(Ⅵ)electroanalysis.Through the quantitative reduction by bulk electrolysis in the presence of acidic SA solution,it was possible to reduce all Cr(Ⅵ)to Cr(Ⅲ)followed by its removal via PEUF.

Scalable carbon black deposited fabric/hydrogel composites for affordable solar-driven water purification

Interfacial solar-driven evaporators have presented great potential for water purification owing to their low energy consumption and high steam generation efficiency. However, their further applications are hindered by the high costs and complicated fabrication processes. Here, a scalable bilayer interfacial evaporator was constructed via an affordable technique, in which carbon black deposited nonwoven fabric(CB@NF) was employed as the upper photothermal layer, as well as PVA/starch hybrid hydrogel for selffloating and water transport. Under simulated one sun irradiation, CB@NF layer displayed excellent photothermal conversion performance, whose temperature could increase 30.4 ℃ within 15 min. Moreover,the introduction of starch into PVA endowed the hybrid hydrogels with considerable water-absorption capability on the premise of ensuring mechanical properties. The resultant CB@NF/PVA/starch composites achieved superior interfacial adhesion performance with interfacial toughness at about 200 J m.Combining with good evaporation performance, salt-rejection property and high purification efficiency on pollutants, this evaporation system would become a promising candidate to alleviate water shortage.

Reductant-assisted polydopamine-modified membranes for efficient water purification

Surface engineering with polydopamine coatings has been considered a promising surface functionalisation tool.However,it is difficult to control the self-polymerisation for polydopamine formation,which usually causes severe interparticle aggregation.In this study,polydopamine self-polymerisation was controlled by adjusting its reducing environment using a reductant(NaBH4)to fabricate mixed cellulose ester(MCE)/polydopamine membranes.An oxidising environment using NaIO4 was additionally tested as the control.The results showed that a thin polydopamine coating with small polydopamine particles was formed on the skeleton frameworks of the MCE membrane with NaBH4,and the self-polymerisation rate was suppressed.The polydopamine coating formed in the reducing environment facilitated excellent water transport performance with a water permeance of approximately 400 L·m^(−2)·h^(−1)·bar^(−1) as well as efficient organic foulant removal with a bovine serum albumin rejection of approximately 90%.In addition,the polydopamine coating with NaBH4 exhibited both excellent chemical stability and anti-microbial activity,demonstrating the contribution of the reducing environment to the performance of the MCE/polydopamine membranes.It shows significant potential for use in water purification.

Hierarchically porous polymers with ultra-high affinity for bisphenol A enables high efficient water purification

The widespread use of bisphenol A(BPA)poses a serious threat to the environment and human health.However,efficient removal of BPA in water is incredibly challenging,owing to the inert chemical nature and electrical neutrality of BPA.In order to solve this problem,for the first time,we propose that a strategy of designing conjugated porous polymers with the pore size matching the size of BPA can greatly enhance the binding force of BPA.On this basis,we developed a novel conjugated poly 1,3,5-tri[4-(diphenylamino)phenyl]benzene(MPDPB)with intrinsic pore matching the size of BPA and multi-stage porous structure by editing polymerization with nitrobenzene.The binding energy of MPDPB to BPA is the highest at present(37.84 kcal/mol),which is 2.3 times that of the most powerful adsorbent previously reported and five times that of the conventional adsorbent.These advantages make MPDPB have super-high adsorption performance towards BPA and high absorbing stability under extreme environments.Impressively,MPDPB could be easily loaded on a non-woven fabric to generate point-of-use devices,which could eliminate more than 99.8%of BPA,making it the best BPA candidate adsorbent material.We believe that the proposed material design derived from the specific structure of the contaminant molecule can be extended to exploring further innovative adsorbents.

Experimental Investigation on Saline Water Purification Using Reverse Osmosis by a Novus Biomimetic Membrane

A substantial amount of Earth’s water is inadequate for human consumption while local demand is outstripping traditional supplies in many world regions;thereby,brackish and seawater treatment has become a prerequisite.This investigation suggested a complete design of an RO-based desalination filter with a multilayer biomimetic membrane.The study demonstrated a comprehensive method for experimentally fabricating a proprietary biomaterial-based multilayer nano-porous membrane.This analysis revealed that Silk Nano-Fibril(SNF)and Hydroxyapatite(HAP)extracted from Bombyx Mori silkworm cocoons may be utilized to manufacture highly methodical multilayer membranes by incorporating protein-self-assembly and in-situ-bio-mineralization.Membrane’s aquaporin layer containing lipid-bilayers has rapid water permeability and high efficacy at eliminating salt ions and contaminants.The 4µm thick SNF/HAP membrane showed a considerable decrease in salinity,with a salt rejection of 93.33%.The proposed membrane had a saline water permeability of 6.58 LMH/bar,almost 61.09%higher than conventional TFC membranes.Hydrophobic barrier and spiral-wrapped filter architecture of the membrane enable low fouling and self-cleaning properties.The schematic filter design and biomimetic fabrication of the SNF/HAP membrane have formulated a conceptual framework that might direct to the broad-scale,low-cost RO water purification filters,increasing the efficiency of water desalination and boosting the effectiveness of water treatment technologies to reduce potable water scarcity.

An all-in-one FeO_(x)-rGO sponge fabricated by solid-phase microwave thermal shock for water evaporation and purification

Developing high-efficiency photothermal seawater desalination devices is of significant importance in addressing the shortage of freshwater.Despite much effort made into photothermal materials,there is an urgent need to design a rapidly synthesized photothermal evaporator for the comprehensive purification of complex seawater.Therefore,we report on all-in-one FeOx-rGO photothermal sponges synthesized via solid-phase microwave thermal shock.The narrow band gap of the semiconductor material Fe_(3)O_(4) greatly reduces the recombination of electron-hole pairs,enhancing non-radiative relaxation light absorption.The abundantπorbitals in rGO promote electron excitation and thermal vibration between the lattices.Control of the surface hydrophilicity and hydrophobicity promotes salt resistance while simultaneously achieving the purification of various complex polluted waters.The optimized GFM-3 sponge exhibitedan enhanced photothermal conversion rate of 97.3% and a water evaporation rate of 2.04 kg/(m^(2)·hr),showing promising synergistic water purification properties.These findings provide a highly efficient photothermal sponge for practical applicationsof seawater desalination and purification,as well as develop a super-rapid processing methodology for evaporation devices.

Jellyfish-inspired alginate composite hydrogel filter prepared by macro-micro double bionic strategy for efficient water purification

Recently,research on hydrogel materials with a porous structure and superior water absorption capabilities significantly grown.However,the hydrogel under gravity-driven separation conditions often exhibit an unstable pore structure,poor mechanical properties,and limited functionality.To this end,this work presents a novel approach that combines a macro-micro double bionic strategy with a triple crosslinking method to develop a multifunctional alginate composite hydrogel filter(2%-SA-κCG-PVA-Ca^(2+),2%-SKP-Ca^(2+)for short)with a stable pore structure and superior mechanical properties,which possessed an umbrella-shaped structure resembling that of jellyfish.The 2%-SKPCa^(2+)filter was synthesized using polyvinyl alcohol(PVA)as a stable structure-directing agent,and sodium alginate(SA)andκ-carrageenan(κ-CG)as polymer hydrogels.The distinctive umbrellashaped hydrogel of 2%-SKP-Ca^(2+)filter,formed through the triple crosslinking method,overcomes the limitations of unstable pore structure and poor durability seen in hydrogels prepared by traditional crosslinking methods.Furthermore,the utilization of the 2%-SKP-Ca^(2+)filter in water treatment demonstrates its good selective permeability,excellent resistance to fouling,and extended longevity,which enables it to simultaneously achieve the multifunctional water purification and the coating of multi-substrate anti-fouling coatings.Therefore,not only does this research provide an efficient,multifunctional,highly pollution-resistant preparation method for designing a new filter,but it also confirms the application prospect of the macro-micro dual bionic strategy developed in this study in complex water treatment.

Assessment of Standard Criteria Implementation in Heamodialysis Water Treatment Units in Sharkia Governorate

Introduction: Haemodialysis is the most well-established form of treatment for ESRD. Method: To evaluate the implementation of standard criteria in heamodialysis water treatment units in Sharkia governorate and to determine the weak points in application of standard criteria, and reach the optimal standards to improve pt. outcomes, across the sectional study was conducted at 30 heamodialysis units of Sharkia governorate, using a modified questionnaire was developed based on MOH protocol and international guidelines such as CARI guidelines, AAMI guidelines and others by the researchers. All data were collected, tabulated and statistically analyzed using SPSS 22.0 for windows (SPSS Inc., Chicago, IL, USA). Results: Of the 30 units, the majority more than 80% of the units achieved the infrastructure and schematic structure, contain water purification devices, good infection control policies, proper chemical disinfection, good monitoring and quality control, accepted maintenance technician evaluation and collected processed water samples results matched decree of 63 for 1996. Conclusion: Most of the studied units nearly fulfilled the standard specifications of both MOH and AAMI. Ensuring that water quality meets AAMI standards and recommendations will minimize patient exposure to potential contaminants such as chemical hazards and endotoxemia associated with the use of the treated water for HD.

Synergically enhanced piezocatalysis performance of eco-friendly(K_(0.52)Na_(0.48))NbO_(3) through ferroelectric polarization and defects

Piezocatalysis has attracted unprecedented research interest as a newly emerging catalysis technology.However,the inherent insulating property of ferroelectric materials ultimately leads to the poor vibration-electricity conversion ability.Herein,this work reports the(K_(0.52)Na_(0.48))NbO_(3) ferroelectric ceramics(KNNFCx),for which the FeCo modification strategy is proposed.The substitution of the moderate amount of FeCo(x=0.015)at Nb site not only optimizes ferroelectricity but also produces beneficial defects,notably increasing Rhodamine B water purification efficiency to 95%.The pinning effect of monovalent oxygen vacancies on ferroelectric domains is responsible for the excellent ferroelectric polarization of KNNFC0.015 through the generation of an internal field to promote charge carriers separation and reduce nonradiative recombination.Importantly,the accompanying electron carriers can easily move to the material surface and participate in redox reactions because they have low activation energy.Therefore,ferroelectric polarization and defects play synergetic roles in enhancing piezocatalytic performance.

High-Throughput Pb Recycling for Perovskite Solar Cells Using Biomimetic Whitlockite

Pb contamination in aquatic environments causes severe pollution;therefore,harmless absorbents are required.In this study,we report a novel synthesis of whitlockite(WH,Ca_(18)Mg_(2)(HPO_(4))_(2)(PO_(4))_(12)),which is the second most abundant biomineral in human bone,and its application as a high-performing Pb^(2+)absorbent.Hydroxyapatite(HAP)and WH are prepared via a simple precipitation method.The Pb2+absorption performance and mechanism of the synthesized biominerals are investigated in aqueous solutions at neutral pH.The results demonstrate that WH exhibits an excellent Pb2+absorption capacity of 2339 mg g^(−1),which is 1.68 times higher than the recorded value for HAP.Furthermore,the absorbed Pb^(2+) ions are recycled into high-purity PbI_(2).This is employed as a precursor for the fabrication of perovskite solar cells(PSCs),resulting in a conversion efficiency of 19.00%comparable to that of commercial PbI2 powder(99.99%purity).Our approach provides an efficient way to remove Pb^(2+)ions from water and reuse them in the recycling of PSCs.

Effects of live rock on removal of dissolved inorganic nitrogen in coral aquaria

Maintaining stable water quality is one of the key processes for recirculating coral aquaculture. Traditional aquarium systems which mainly utilized a nitrification of nitrifying bacteria attached to the surface of massive artificial filter material are difficult to maintain the oligotrophic conditions necessary for coral aquaculture. This study investigated the removal effects of dissolved inorganic nitrogen(ammonia and nitrate) by live rock(LR), a key component in the "Berlin system" coral aquarium. The expression levels of bacterial functional genes, AOA3,amo A and nos Z, were measured on the exterior and interior of LR. The nitrifying and denitrifying bacterial abundance on LR was quantified and the nitrogen nutrient regulatory effects of LR were evaluated. The results demonstrated that LR mainly removed ammonium(NH_4^+) from the water with a mean efficiency of 0.141 mg/(kg·h), while the removal of nitrate(NO_3~–) was not significant. Bacterial diversity analysis showed that ammonia-oxidizing bacteria(AOB) were the most common bacteria on LR, which accounted for 0.5%–1.4% of the total bacterial population, followed by denitrifying bacteria, which accounted for 0.2% of the total population, and the ammonia-oxidizing archaea(AOA) were the least common type(<0.01%). The low abundance of denitrifying bacteria may be responsible for the poor nitrate(NO_3~–) removal of LR. Thus, other biological filtration methods are needed in coral aquaria to control nitrates generated from nitrification or biological metabolism.