In this paper, a high calcium high sulfate ash as the main material, adding fly ash, lime, cement, gypsum and some modifiers to prepare autoclaved aerated concrete. The products complies with the technical requirement...In this paper, a high calcium high sulfate ash as the main material, adding fly ash, lime, cement, gypsum and some modifiers to prepare autoclaved aerated concrete. The products complies with the technical requirements of GB/T11968-2006. This paper also studies the influence of the physical methods and water ratio on autoclaved aerated concrete by high calcium high sulfate ash aerated concrete. The best ratio of water and Grinding time were found in practice study.展开更多
By micro- and macro-observations, the deterioration mechanisms of concrete under alternate action between repeated sub-high temperature/cooling by water and sodium sulfate solution attack （TW-SA） were studied; meanw...By micro- and macro-observations, the deterioration mechanisms of concrete under alternate action between repeated sub-high temperature/cooling by water and sodium sulfate solution attack （TW-SA） were studied; meanwhile, the single sodium sulfate solution attack （SA） was also done as comparison. Micro-observations included the analysis of attack products by thermal analysis method and the determination of sulfate-ion content from surface to interior by chemical titrating method （modified barium sulfate gravimetric method）. Macro-observations mainly included the mechanical behaviors such as compressive strength, splitting strength. The experimental results indicate, in both cases, the main attack product is ettringite, only in the first layer of case SA some gypsum is checked; in case SA, the sulfate ions mainly concentrate in the surface layer, so the attack is relatively mild; but in case TW-SA, the repeated sub-high temperature/cooling by water promotes the sulfate ions diffusing inwards, which leads to obvious strength degradation.展开更多
Various process residues represent a kind of biomass resource already concentrated but containing water as much as 60 wt.%. These materials are generally treated as waste or simply combusted directly to generate heat....Various process residues represent a kind of biomass resource already concentrated but containing water as much as 60 wt.%. These materials are generally treated as waste or simply combusted directly to generate heat. Recently, we attempted to convert them into middle caloric gas to substitute for natural gas, as a chemical or a high-rank gaseous fuel for advanced combustion utilities. Such conversion is implemented through dual fluidized bed gasification （DFBG）. Concerning the high water content of the fuels, DFBG was suggested to accomplish either with high-efficiency fuel drying in advance or direct decoupling of fuel drying/pyrolysis from char gasification and tar/hydrocarbon reforming. Along with fuel drying, calcium-based catalyst can be impregnated into the fuel, without much additional cost, to increase the fuel＇s gasification reactivity and to reduce tar formation. This article reports the Ca impregnation method and its resulting effects on gasification reactivity and tar suppression ability. Meanwhile, the principle of directly gasifying wet fuel with decoupled dual fluidized bed gasification （D-DFBG） is also highlighted.展开更多
文摘In this paper, a high calcium high sulfate ash as the main material, adding fly ash, lime, cement, gypsum and some modifiers to prepare autoclaved aerated concrete. The products complies with the technical requirements of GB/T11968-2006. This paper also studies the influence of the physical methods and water ratio on autoclaved aerated concrete by high calcium high sulfate ash aerated concrete. The best ratio of water and Grinding time were found in practice study.
基金Funded by the National Natural Science Foundation of China(No. 90715041)Outstanding Youth Science Fund of Henan Province(No.04120002300)
文摘By micro- and macro-observations, the deterioration mechanisms of concrete under alternate action between repeated sub-high temperature/cooling by water and sodium sulfate solution attack （TW-SA） were studied; meanwhile, the single sodium sulfate solution attack （SA） was also done as comparison. Micro-observations included the analysis of attack products by thermal analysis method and the determination of sulfate-ion content from surface to interior by chemical titrating method （modified barium sulfate gravimetric method）. Macro-observations mainly included the mechanical behaviors such as compressive strength, splitting strength. The experimental results indicate, in both cases, the main attack product is ettringite, only in the first layer of case SA some gypsum is checked; in case SA, the sulfate ions mainly concentrate in the surface layer, so the attack is relatively mild; but in case TW-SA, the repeated sub-high temperature/cooling by water promotes the sulfate ions diffusing inwards, which leads to obvious strength degradation.
基金The Natural Science Foundation of China(NSFC) financed the first period of research on the decoupled dual fluidized bed gasification(20606034,20776144)
文摘Various process residues represent a kind of biomass resource already concentrated but containing water as much as 60 wt.%. These materials are generally treated as waste or simply combusted directly to generate heat. Recently, we attempted to convert them into middle caloric gas to substitute for natural gas, as a chemical or a high-rank gaseous fuel for advanced combustion utilities. Such conversion is implemented through dual fluidized bed gasification （DFBG）. Concerning the high water content of the fuels, DFBG was suggested to accomplish either with high-efficiency fuel drying in advance or direct decoupling of fuel drying/pyrolysis from char gasification and tar/hydrocarbon reforming. Along with fuel drying, calcium-based catalyst can be impregnated into the fuel, without much additional cost, to increase the fuel＇s gasification reactivity and to reduce tar formation. This article reports the Ca impregnation method and its resulting effects on gasification reactivity and tar suppression ability. Meanwhile, the principle of directly gasifying wet fuel with decoupled dual fluidized bed gasification （D-DFBG） is also highlighted.
