The Impact and Intervention of Handheld Tai Chi Water-Resistance Fitness Ball on Middle-Aged and Elderly Patients with Parkinson’s Disease

Through the use of a survey and statistical methods, this study explores the effects and interventions of handheld Tai Chi water resistance fitness balls on the elderly with Parkinson’s disease. Firstly, a questionnaire on exercise compliance for patients with Parkinson’s disease was developed, and its reliability and validity were tested. Then, a survey was conducted to investigate the current status of exercise compliance among Parkinson’s disease patients, including general information, scoring status, and single and multiple factor analyses of influencing factors [1]. The results of the study show that through qualitative research, the dimensions and item pools of the questionnaire were initially constructed, and the reliability analysis of the questionnaire was conducted through Delphi expert consultation, with favorable results in terms of its reliability and validity [2]. Regarding the current status of exercise compliance among Parkinson’s disease patients, the study found that the level of exercise compliance needs improvement, and there are significant differences in exercise compliance levels among patients under different circumstances. Finally, the research results were discussed and conclusions were drawn. The innovation of this study lies in the development of a questionnaire on exercise compliance for patients with Parkinson’s disease and the preliminary qualitative research and Delphi expert consultation conducted on it, providing new ideas and methods for the study of exercise compliance. However, the study also has limitations as it did not examine the effects of other interventions on Parkinson’s disease, so further research should be conducted [3].

Scenario-Based Assessment of the Water-Energy-Food Nexus in Kuwait: Insights for Effective Resource Management

The interdependency among water, food, and energy (WEF) in the GCC countries is strongly and closely interlinked, and is intensifying as demand for resources increases with population growth and changing consumption patterns, and are expected to be further compounded by the impacts of climate change. Therefore, integrated management of the three sectors is crucial to reduce trade-offs and build synergies among them. This paper presents a comprehensive framework to assess the WEF nexus in Kuwait as a representative case for the GCC countries. The framework consists of three main steps: 1) evaluating the influence of socio-economic development and climate change on water, energy, and food resources;2) generating scenario-based projections;and 3) conducting an extensive quantitative nexus analysis. The WEF interlinkages in Kuwait are modelled quantitatively using the Q-Nexus model, and current critical interdependencies are evaluated. Then, various WEF-Nexus scenarios were conducted for the year 2035 to explore the effects of management interventions in one sector on the other two sectors. The main findings are that per capita municipal water consumption is a major influencer on the WEF-nexus due to the heavy reliance on thermal desalination in municipal water supply in Kuwait, which is attributed to its energy intensity, financial cost, GHGs emissions, and environmental impacts on the marine and air environments. To reduce WEF trade-offs, mitigate risks, and build synergies among the three sectors, it is important to shift the current policy focus on supply-side management approach to the demand-side management and efficiency approaches.

A Triple Nexus Water-Energy-Housing (WEH) Framework Modelling towards Improved Decision-Making in Humanitarian Operations

Given the challenges facing most humanitarian operations worldwide, a change of approach is needed to ensure greater sustainability of humanitarian settlements right from the planning stage. Some studies attribute unsustainability to inadequate provision of basic resources and highlight the apparent bottlenecks that prevent access to the meaningful data needed to plan and remedy problems. Most operations have relied on an “ad hoc ism” approach, employing parallel and disconnected data processing methods, resulting in a wide range of data being collected without subsequent prioritization to optimize interconnections that could enhance performance. There have been little efforts to study the trade-offs potentially at stake. This work proposes a new framework enabling all subsystems to operate in a single system and focusing on data processing perspective. To achieve this, this paper proposes a Triple Nexus Framework as an attempt to integrate water, energy, and housing sector data derived from a specific sub-system within the overall system in the application of Model-Based Systems Engineering. Understanding the synergies between water, energy, and housing, Systems Engineering characterizes the triple nexus framework and identifies opportunities for improved decision-making in processing operational data from these sectors. Two scenarios illustrate how an integrated platform could be a gateway to access meaningful operational data in the system and a starting point for modeling integrated human settlement systems. Upon execution, the model is tested for nexus megadata processing, and the optimization simulation yielded 67% satisfactory results, demonstrating that an integrated system could improve sustainability, and that capacity building in service delivery is more than beneficial.

Assessing the Impacts of Climate Change on Water-Borne Diseases: A Comparative Study on Taltali Upazila of Barguna District

Objectives: To determine the economic challenges brought on by water-borne illnesses as a result of climate change. In addition to identifying potential access to safe drinking water during climate change and potential health hurdles brought on by water-related diseases, it is important to learn how to reduce the spread of water-borne diseases. Methods: A mixed method design was adopted to evaluate this research, and probability sampling, more specifically simple random sampling, was used to select to sample from the target population. The study was conducted in Taltali upazila of the Barguna district, and data was collected from 384 respondents;among them, 5 respondents were selected for the key informant interview. The research project began in June 2022 and was completed in December 2022. Results: 41.4% of respondents said they suffer from dysentery, 22.4% said the expense of treating water-borne diseases has increased as a result of climate change, and 37.8% said they must travel great distances to obtain clean drinking water. Currently, 41.7% of individuals utilize tube-well water, compared to 19.3% five to ten years ago, and 27.4% have been taught that water filtration helps reduce the spread of water-borne diseases. Conclusions: People’s vulnerability to climate change in the study area is a result of factors such as rapid population increase, unequal access to resources, food insecurity, a long distance to collect water, inadequate medical facilities, a lack of poverty, and a weak health system.

In Search of Portable Water Supplies within a Brine and Mine Water-Invaded Region for Serving Some Communities around Ishiagu, Afikpo and Environs in Abakaliki Basin, Southeast Nigeria

The study investigates the hydrogeochemical characteristics of some towns in the Abakaliki Basin, comprising, Ishiagu, Aka Eze, Amaseri, Afikpo and Okposi communities, with the aim of sourcing for portable water in the area. The basin is underlain by Albian sediments, essentially shales, in the lowlands, which were affected by low-grade metamorphism that had produced slates. The highlands comprise basic intrusives from episodes of magmatism and metallic ore mineralisation. Injection of brines into the aquifer system and low, seasonal aquifer recharge from rainfall results in poor water quality in the area. The study analyzes the geochemical distribution in water sources in the area and identifies sources of pollutants to guide the better choice of portable water. Results of hydrogeochemical analysis of both surface and groundwater from the communities were compared with World Health Organization to identify portable water locations in the area. While the salt lake at Okposi is the main source of brine intrusion in the study area, the Pb/Zn mine at Ishiagu is the main source of mine-water pollution in the study area. Most chemical parameters, (especially Cl-, Na+, Ca2+, Mg2+, SO42-, HCO3-) maintain high concentrations within the salt lake area, with the values declining away from the salt lake. The main anthropogenic source of pollution in the area, especially at Ishiagu, is the indiscriminate surface mining of lead-zinc without proposer waste management practices. Possible sourcing for portable water in the study area includes a deep borehole at Ishiagu, away from lead-zinc intrusives. At the Okposi axis, searching for portable water in boreholes should target shallower aquifers that do not communicate with the deeper-seated brine zones, likewise targeting zones farther away from these brine-invaded areas. A controlled pumping rate could potentially ensure that the cone of depression was not low enough to reach the brine zone at depth. In addition, desalination could also potentially render the salt water drinkable if properly handled to eliminate the high concentration of salts in the water to the level of acceptable limit by the WHO. Based on the study, the best area to target for portable water in the study area is Afikpo, with most geochemical elements naturally occurring within WHO’s standard concentration while portable water could be harnessed in areas further away from mining sites, especially at deep groundwater.

Payment for Water-Related Ecosystem Services as a Strategic Watershed Management Approach

Payments for ecosystem services (PES) have been created worldwide to assist watershed management and improve or maintain water quality. Considering their importance, we conducted a holistic review of payment for water-related ecosystem services to understand how this instrument has been applied in watershed management worldwide. First, we identified the watershed management actions considered by the PES programs and the challenges of implementing water-related PES. After we identified the methods and criteria used to define priority areas for water-related PES. Our review considered articles published on the Web of Science from 2011 to 2022. We found 236 articles relating PES to water resources, highlighting the main water conservation strategies: native vegetation conservation, native vegetation restoration, and implementing best agricultural practices. The method most frequent was interview, followed by the use of technologies, document analysis, and hydrological models. Another significant result was that priority areas for receiving PES are mainly riparian zones, areas near or with native vegetation cover, areas with higher erosion potential, steep areas, and areas with socially vulnerable communities. This review was crucial to identify efficient water resource conservation strategies and potential challenges in the implementation and development of PES programs.

Overburden fracture evolution laws and water-controlling technologies in mining very thick coal seam under water-rich roof

Considering the danger of water inrush in mining very thick coal seam under water-rich roof in Majialiang Coal Mine,the universal discrete element(UDEC)software was used to simulate the overburden fracture evolution laws when mining 4#coal seam.Besides,this study researched on the influence of face advancing length,speed and mining height on the height of the water flowing fractured zones(HWFFZ),and analyzed the correlation of face advancing length and change rules of aquifer water levels and goaf water inflow.Based on those mentioned above,this research proposed the following water-controlling technologies:draining the roof water before mining,draining goaf water,reasonable advancing speed and mining thickness.These water-controlling technologies were successfully used in the feld,thus ensured safely mining the very thick coal seam under water-rich roof.

Discrimination conditions and process of water-resistant key strata

Water-preservation mining is one of the most important parts of the ‘Green Mining' technology system,which can realize the effective regulation of groundwater resources by controlling strata movement,changing passive prevention and governance of water disasters to active conservation and utilization of groundwater resources and thus obtaining coal and water simultaneously in mining.The concept of water-resistant key strata further enriches the content of the key stratum theory and provides a theoretical basis for water-preservation mining.In order to realize the idea of water-resistant key strata as a guideline in the design of water-preservation mining and engineering applications,the conditions for discrimination in the process of water-resistant key strata,we have presented a mechanical model,as well as its corresponding computer program,based on a large number of theoretical analyses and field measurements,as well as on a comprehensive consideration of the position,structural stability and seepage stability of key strata.Practical engineering applications indicate that this discrimination method and its corresponding computer program on water-resistant key strata are accurate and reliable and can satisfy the actual design needs of water-preservation mining and thus have instructional importance for water-preservation mining in mining areas lacking water.

Liquid-Liquid Equilibrium for 1-Butanol-Water-KF and 1-Butanol-Water-K_2CO_3 Systems

KF or K2CO3 was added into the 1-butanol-water system and two phases were formed： water-rich phase （water phase） and 1-butanol-rich phase （1-butanol phase）. The liquid liquid equilibrium （LLE） data for 1-butanol-water-KF and 1-butanol-water-K2CO3 systems were measured at 25℃ and showed that 1-butanol phase contained negligible salt and water phase contained negligible 1-butanol when the concentrations of KF and K2CO3 in the water phase were equal to or higher than 27.11% and 31.68% , respectively. Thus water could be separated efficiently from 1-butanol-water by adding KF or K2CO3 into the system. A theoretical calculation of LLE data was calculated by using the Pitzer theory to get water activity in the water phase, and by the models, such as the Wilson, NRTL or the UNIQUAC for the 1-butanol phase. For 1-hutanol-water-KF system, the experimental data were found in good agreement with the calculated results by using Pitzer theory and Wilson equa tion, while for 1-butanol-water-K2CO3 system, the experimental data were found in good agreement with the calculated results by using Pitzer theory and UNIQUAC eauation.

基于water-level调整的认知无线电传输速率计算算法

在瑞利衰落模型下,根据认知用户的效用函数,来解决认知无线电中的信道规划问题,进而得到认知用户的传输速率。当认知用户传输功率和比特误码率受限时,其最终效用仅与water-level有关,因此文中提出了一种基于water-level调整的功率分配及算法,实现了认知无线电中载波及功率的合理分配,并得到了认知用户的传输速率.理论与仿真分析表明:该算法具有较低的运算复杂度和接近于最优算法的认知用户效用;调整因子仅与算法的收敛速度有关,而与用户总效用及信道的分配结果无关.

The distribution of drinking water-to-cattle ratios in the summer across four feedlots in the Texas High Plains

In this short communication, we report the findings of a cross-sectional pilot study of the amount of water available per head of cattle (water-to-cattle ratio) and the associated feedlot and environmental factors across 26 pens in four Texas feedlots. The water-to-cattle ratio varied greatly among pens within and between feedlots. Mixed-effect linear regression modeling with feedlot as a random effect indicated that water in troughs with a higher water-to-cattle ratio was generally warmer when compared with water in troughs with a lower water-to-cattle ratio. This may have implications in the transmission and persistence of pathogens in feedlot cattle, such as Shiga toxin-producing Escherichia coli and Salmonella, because warmer water has been reported to favor the growth of these pathogens. Therefore, future field studies in feedlot cattle are warranted to assess whether the water-to-cattle ratio affects the prevalence of these pathogens in the water itself or in feces shed by the animals.

Problems and Development Countermeasures of Agricultural Water-Saving Irrigation

Agriculture is the biggest water user in China,and the development of agricultural water-saving has great significance to the national economy and social development. In this paper,the present situation of water used in agriculture irrigation and water-saving potential were analyzed,and the ＂ bottleneck＂ and main problems existing in water-saving irrigation in China were discussed. From the aspects of engineering investment channels,agricultural water-saving policies and management system,reform of agricultural water price and water right transfer,improvement of farmers＇ water-saving consciousness,and promotion of rural land transfer,suggestions were proposed for the development of China＇s agricultural water-saving in future,which will provide a technical support for the sustainable use of agricultural water resources in China.

Water-in-salt锂离子电解液研究进展

与传统的商用有机锂离子电池相比,水系锂离子电池具有高安全性、成本低、环境友好等优点,但由于水的热力学窗口较窄(1.23 V),从而大大限制了其输出电压和能量密度。Water-in-salt电解液的提出将水溶液的电化学窗口拓宽到3.0V以上,为实现新型高电压水系锂离子电池提供了有利前提保证。本综述意在介绍Water-in-salt电解液及其相关衍生体系以及其在锂离子电池、锂硫电池以及混合离子电池中的相关应用拓展。与此同时,对该新体系中所引出的新的基础科学问题,包括水系固态电解质界面(SEI)膜的生长机理及锂离子的传输机制做了简单归纳和总结。

Study on Quantitative Model of Karst Drainage Basin Water-Holding Based on Principal Component Analysis: A Case Study of Guizhou, China

In Karst drainage basins, there are the ground water and underground water exchanging frequently, and the shortage of water resources due to having the special double aquifer mediums and unique surface and subsurface river systematic structure. This paper is to select 20 research sampling areas coming fromGuizhouProvince, and according to the spectral characteristics of the catchment water-holding mediums and vegetations, and using the remote sensing technique, extract the watershed vegetation index. According to the principle of principal component analysis, using the software of Spss and Matlab is to analyze the impacts of watershed vegetation type on the catchment water-holding ability, and establish the principal component analysis function. Studies have shown that: 1) the watershed vegetation coverage rate plays an important role in Karst basin water-holding ability;2) the catchment water-holding ability is the comprehensive reflection and manifestation of the Catchment Water-storing Capacity (CWC);3) it is much better effects and higher accuracy to monitor/forecast the catchment water-holding volume by using the vegetation indices.

Plasma induced degradation of Indigo Carmine by bipolar pulsed dielectric barrier discharge(DBD) in the water-air mixture

Degradation of the Indigo Carmine(IC) by the bipolar pulsed DBD in water-air mixture was studied. Effects of various parameters such as gas flow rate, solution conductivity, pulse repetitive rate and ect., on color removal efficiency of dying wastewater were investigated. Concentrations of gas phase O 3 and aqueous phase H 2O 2 under various conditions were measured. Experimental results showed that air bubbling facilitates the breakdown of water and promotes generation of chemically active species. Color removal efficiency of IC solution can be greatly improved by the air aeration under various solution conductivities. Decolorization efficiency increases with the increase of the gas flow rate, and decreases with the increase of the initial solution conductivity. A higher pulse repetitive rate and a larger pulse capacitor C\-p are favorable for the decolorization process. Ozone and hydrogen peroxide formed decreases with the increase of initial solution conductivity. In addition, preliminary analysis of the decolorization mechanisms is given.

Effects of Long-Term Fertilization on the Distribution of Carbon, Nitrogen and Phosphorus in Water-Stable Aggregates in Paddy Soil

We investigated the size distribution of water-stable aggregates and the soil carbon, nitrogen and phosphorus concentration over aggregate size fractions based on a long-term （1990-2006） fertilization experiment in a reddish paddy soil. The results showed that the largest water-stable aggregate （WSA） （〉5 mm） and the smallest WSA （〈0.25 mm） took up the first largest proportion （38.3%） and the second largest proportion （23.3%）, respectively. Application of organic materials increased the proportion of the large WSA （〉2 mm） and decreased the proportion of the small WSA （〈1 ram）, resulting in an increase in the mean weight diameter of WSA, whereas application of chemical fertilizer had little effect. Application of organic materials, especially combined with chemical fertilizers, increased total carbon, nitrogen and phosphorus concentrations in all sizes of WSA, and total carbon, nitrogen and phosphorus were prone to concentrate in the large WSA. Further more, application of organic materials improved the supply effectiveness of available phosphorus, whereas had little influence on the labile carbon in WSA. Application of chemical fertilizers improved concentrations of total and available phosphorus in all sizes of WSA, whereas had little influence on total carbon and nitrogen contents. Economical fertilization model maintained the soil fertility when compared with full dose of chemical fertilizers, indicating that using organic materials could reduce chemical fertilizers by about one third.

Effects of Water-Collecting and -Retaining Techniques on Photosynthetic Rates, Yield, and Water Use Efficiency of Millet Grown in a Semiarid Region

Field experiments were conducted in 2003 and 2004 to study the effects of plastic ridges and furrow film mulching （plastic film on sowing, as well as plastic film on flat soil and hole sowing） and chemicals （a drought resistant agent and a water- retaining agent） on growth, photosynthetic rate, yield, and water use efficiency （WUE） of spring millet （Setaria italica L.）. The experimental results showed that water-collecting and -retaining techniques can effectively increase soil moisture content, the leaf photosynthetic rate and crop growth. Due to increased soil moisture under the plastic-covered ridge and furrow water-collecting in July and August, dry matter and plant height had a increase at the booting stage （late growth advantage）. However, the plastic-covered flat soil and hole sowing reduced soil evaporation during early growth, the increase of dry matter and plant height appeared at the seedling stage （early growth advantage）. Plastic-covered ridge and furrow sowing supplemented with chemical reagents had significant positive effects on water collection and soil moisture retention. Improvement of soil moisture resulted into the increase of the photosynthetic rate, dry matter accumulation yield and WUE. The water-collecting and -retaining techniques can improve WUE and enhance crop yield. Correlation analysis demonstrated that the photosynthetic rate under the water-collecting and -retaining techniques was significantly associated with the soil moisture, but had no significant relationship with leaf chlorophyll content. Plastic- covered ridge and furrow sowing supplemented with chemical reagents increased the yield and WUE by 114% and 8.16 kg ha-1 mm-1, respectively, compared with the control; while without the chemical reagents the yield and WUE were 95% and 7.42 kg ha-1 mm-1 higher, respectively, than those of the control.

Water-Assisted Injection Molding System Based on Water Hydraulic Proportional Control Technique

Water-assisted injection molding（WAIM）, an innovative process to mold plastic parts with hollow sections, is characterized with intermittent, periodic process and large pressure and flow rate variation. Energy savings and injection pressure control can not be .attained based on conventional valve control system. Moreover, the injection water can not be supplied directly by water hydraulic proportional control system. Poor efficiency and control performance are presented by current trial systems, which pressurize injection water by compressed air. In this paper, a novel water hydraulic system is developed applying an accumulator for energy saving. And a new differential pressure control method is proposed by using pressure cylinder and water hydraulic proportional pressure relief valve for back pressure control. Aiming at design of linear controller for injection water pressure regulation, a linear load model is approximately built through computational fluid dynamics（CFD） simulation on two-phase flow cavity filling process with variable temperature and viscosity, and a linear model of pressure control system is built with the load model and linearization of water hydraulic components. According to the simulation, model based feedback is brought forward to compensate the pressure decrease during accumulator discharge and eliminate the derivative element of the system. Meanwhile, the steady-state error can be reduced and the capacity of resisting disturbance can be enhanced, by closed-loop control of load pressure with integral compensation. Through the developed experimental system in the State Key Lab of Fluid Power Transmission and Control, Zhejiang University, China, the static characteristic of the water hydraulic proportional relief valve was tested and output pressure control of the system in Acrylonitrile Butadiene Styrene（ABS） parts molding experiments was also studied. The experiment results show that the dead band and hysteresis of the water hydraulic proportional pressure relief valve are large, but the control precision and linearity can be improved with feed-forward compensation. With the experimental results of injection water pressure control, the applicability of this WAIM system and the effect of its linear controller are verified. The novel proposed process of WAIM pressure control and study on characteristics of control system contribute to the application of water hydraulic proportional control and WAIM technology.

The Water-Bearing Numerical Model and Its Operational Forecasting Experiments PartII: The Operational Forecasting Experiments

おhe water-bearing numerical model is undergone all round examinations during the operational forecasting experiments from 1994 to 1996. A lot of difficult problems arising from the model′s water-bearing are successfully resolved in these experiments through developing and using a series of technical measures. The operational forecasting running of the water-bearing numerical model is realized stably and reliably, and satisfactory forecasts are obtained.

Characteristics and Performance of Novel Water-Absorbent Slow Release Nitrogen Fertilizers

In this article, a research on the characteristics and performance of water-absorbent slow release nitrogen fertilizer （WASRNF） using infrared spectroscopy （IR）, scanning electronic microscopy （SEM）, differential scanning calorimetry （DSC）, and thermogravimetry analysis （TGA）, was present. The results indicate that the water absorbency and nitrogen analysis of WASRNF is 103 g g^-1 and 30%, respectively, and WASRNF exhibits approximately neutral pH and very low salt index. WASRNF is a copolymer of nitrogen fertilizer and super absorbent polymer （SAP） monomers which is formed through hydrogen bond interaction, and the molecule contains hydrophilic groups, which is responsible for the absorption and water retention capacity of the molecule. WASRNF is a gel that exhibits the ability to swell, but does not dissolve in water. WASRNF shows non-homogenous nature as a whole, but in local zone it is homogenous, the copolymer molecule shows chain network that is the physical structure responsible for absorption and retention of water in WASRNF. The water retained in WASRNF exists as free and nonfreezing bound and freezing bound water states, with the free and the nonfreezing water accounting for more than 95% of water retained in WASRNF, and the nonfreezing bound water for less than 5%. WASRNF functions in delaying the release of nitrogen from it, thereby serving a novel slow release nitrogenous fertilizer.