Failures due to high-cycle fatigue have led to a high cost in aerospace engineering over the past few decades.In this paper,the experimental results of the fatigue behavior of compressor blade specimen subjected to re...Failures due to high-cycle fatigue have led to a high cost in aerospace engineering over the past few decades.In this paper,the experimental results of the fatigue behavior of compressor blade specimen subjected to resonance and the effects of a damping hard coating on relieving the fatigue progress are presented.The crack initiation and propagation processes were observed under resonance of the first bending mode by using the resonant frequencies as the indicator.Significant nonlinear features were observed in the spectrum of the blade with a fatigue crack.The finite element model considering the breathing crack was established with nonlinear contact based on the crack localization and size,which was obtained by ultrasonic phased array technology.The simulation results of the vibration behavior of the cracked blade were obtained and consistent with the experimental results.A NiCrAlY coating was deposited on the blade,and increases in the fatigue life were observed under the same condition.The results of this paper can help to better understand the fatigue of a compressor blade subjected to resonance and provide a preference for the application of a damping hard coating on compressor blades.展开更多
A triethylenetetramine epoxy mixture was synthesized through the reaction of a low-molecular-weight liquid epoxy resin with triethylenetetramine(TETA).Then triethyltetramine(TETA)was injected dropwise into a pro-pylen...A triethylenetetramine epoxy mixture was synthesized through the reaction of a low-molecular-weight liquid epoxy resin with triethylenetetramine(TETA).Then triethyltetramine(TETA)was injected dropwise into a pro-pylene glycol methyl ether(PM)solution for chain extension reaction.A hydrophilic andflexible polyether seg-ment was introduced into the hardener molecule.The effects of TETA/DGEPG,reaction temperature and reaction time on the epoxy conversion of polyethylene glycol diglycidyl ether(DGEPG)were studied.In addition,several alternate strategies to add epoxy resin to the high-speed dispersion machine and synthesize MEA DGEBA adduct(without catalyst and with bisphenol A diglycidyl ether epoxy resin)were compared.It was found that the higher the molecular weight of triethylenetetramine,the longer the chain segment of the surface active molecule.When the equivalence ratio of amine hydrogen and epoxy group is low,the stability of lotion is good.When the ratio of amine hydrogen to epoxy group is large,the content of triethylenetetramine is small.The main objective of this study is the provision of new data and knowledge for the development of new materials in the coating and electronic industry.展开更多
The structure, properties and application to water-soluble coatings of a new complex antimicrobial agent Ag-carboxylmethyl citosan-thiabendazole （Ag-CMCTS-TBZ） prepared from different materiel ratios were reported. ...The structure, properties and application to water-soluble coatings of a new complex antimicrobial agent Ag-carboxylmethyl citosan-thiabendazole （Ag-CMCTS-TBZ） prepared from different materiel ratios were reported. The silver ions were preferably coordinated with the free-NH2 groups and the -OH groups of secondary alcohol and carboxyl in CMCTS. TBZ preferably bonded to carboxyl group in CMCTS by electrostatic force and hydrogen bonding. Increase in silver ions content in the complex agent improved to some limited extent the antibacterial activity, but enhanced coloring and cost of the complex agent. Increase in TBZ content resulted in increase of antifungal activity, but decrease of water solubility of the complex agent. The antimicrobial MICs of the complex agent to Esherichia coil, Staphylococcus aureus, Candida albicans, Aspergillus niger, Mucor sp. were 20 -80, 15 -60, 20 - 55, 40 - 250, and 400 - 1700 mg/kg, respectively. Addition of 0.1% of this complex agent to acrylic emulsion paint made the paint without substantial change in color, luster, viscosity, odor or pH value, but with an excellent and chronically persisting broad-spectra antimicrobial activity.展开更多
A double-layer aluminum consisting of an aluminum core and a shellof SiO2 and polyacrylic acid was synthesized.This modified aluminum was used to improve the corrosion resistance and dispersive property of aluminum in...A double-layer aluminum consisting of an aluminum core and a shellof SiO2 and polyacrylic acid was synthesized.This modified aluminum was used to improve the corrosion resistance and dispersive property of aluminum in waterborne media.TEM,FTIR,XPS,and EDX determination showed that PAA and SiO2 were coated on the surface of aluminum.Evolved hydrogen detection showed that the corrosion resistance of composite particle had been markedly improved.Maximum corrosion inhibition efficiency of SiO2 coated aluminum（SiO2@Al）was 95.1% while that of double-layer coated aluminum（PAA/SiO2@Al）was 98.8%.Meanwhile,polyacrylic acid layer improved the agglomeration of aluminum significantly.According to the dispersibility test,the particle size of 50% volume fraction [d（0.5）] of aluminum,SiO2@Aland PAA/SiO2@Alwere 42,53,and 34 μm,respectively.展开更多
This paper investigates the dynamic response of a coated half-plane subjected to a harmonic Hertz load on the coating surface.The complex modulus is used to describe the hysteretic damping of the elastic homogeneous c...This paper investigates the dynamic response of a coated half-plane subjected to a harmonic Hertz load on the coating surface.The complex modulus is used to describe the hysteretic damping of the elastic homogeneous coating and half-plane.Using the Helmholtz decomposition and Fourier integral transform technique,we derive the stresses and displacements of the coating and half-plane from Navier5s elasticdynamic equations in the form of complex integrals.Then,the global adaptive quadrature algorithm is exploited to solve the complex integrals numerically.The effects of Young’s modulus ratio,density ratio,coating thickness,loss factor and external excitation frequency are discussed.It is found that the dynamic response of displacements and stresses becomes increasingly oscillatory with the increase in excitation frequency.展开更多
基金Project(DUT20RC(3)014)supported by the Fundamental Research Funds for the Central Universities,China,Project(VCAME201801)supported by Key Laboratory of Vibration and Control of Aero-Propulsion System(Ministry of Education),ChinaProject(11472068)supported by the National Natural Science Foundation of China。
文摘Failures due to high-cycle fatigue have led to a high cost in aerospace engineering over the past few decades.In this paper,the experimental results of the fatigue behavior of compressor blade specimen subjected to resonance and the effects of a damping hard coating on relieving the fatigue progress are presented.The crack initiation and propagation processes were observed under resonance of the first bending mode by using the resonant frequencies as the indicator.Significant nonlinear features were observed in the spectrum of the blade with a fatigue crack.The finite element model considering the breathing crack was established with nonlinear contact based on the crack localization and size,which was obtained by ultrasonic phased array technology.The simulation results of the vibration behavior of the cracked blade were obtained and consistent with the experimental results.A NiCrAlY coating was deposited on the blade,and increases in the fatigue life were observed under the same condition.The results of this paper can help to better understand the fatigue of a compressor blade subjected to resonance and provide a preference for the application of a damping hard coating on compressor blades.
基金This work is financially supported by a University-Level Doctoral Research Start-Up Fund in 2019.
文摘A triethylenetetramine epoxy mixture was synthesized through the reaction of a low-molecular-weight liquid epoxy resin with triethylenetetramine(TETA).Then triethyltetramine(TETA)was injected dropwise into a pro-pylene glycol methyl ether(PM)solution for chain extension reaction.A hydrophilic andflexible polyether seg-ment was introduced into the hardener molecule.The effects of TETA/DGEPG,reaction temperature and reaction time on the epoxy conversion of polyethylene glycol diglycidyl ether(DGEPG)were studied.In addition,several alternate strategies to add epoxy resin to the high-speed dispersion machine and synthesize MEA DGEBA adduct(without catalyst and with bisphenol A diglycidyl ether epoxy resin)were compared.It was found that the higher the molecular weight of triethylenetetramine,the longer the chain segment of the surface active molecule.When the equivalence ratio of amine hydrogen and epoxy group is low,the stability of lotion is good.When the ratio of amine hydrogen to epoxy group is large,the content of triethylenetetramine is small.The main objective of this study is the provision of new data and knowledge for the development of new materials in the coating and electronic industry.
文摘The structure, properties and application to water-soluble coatings of a new complex antimicrobial agent Ag-carboxylmethyl citosan-thiabendazole （Ag-CMCTS-TBZ） prepared from different materiel ratios were reported. The silver ions were preferably coordinated with the free-NH2 groups and the -OH groups of secondary alcohol and carboxyl in CMCTS. TBZ preferably bonded to carboxyl group in CMCTS by electrostatic force and hydrogen bonding. Increase in silver ions content in the complex agent improved to some limited extent the antibacterial activity, but enhanced coloring and cost of the complex agent. Increase in TBZ content resulted in increase of antifungal activity, but decrease of water solubility of the complex agent. The antimicrobial MICs of the complex agent to Esherichia coil, Staphylococcus aureus, Candida albicans, Aspergillus niger, Mucor sp. were 20 -80, 15 -60, 20 - 55, 40 - 250, and 400 - 1700 mg/kg, respectively. Addition of 0.1% of this complex agent to acrylic emulsion paint made the paint without substantial change in color, luster, viscosity, odor or pH value, but with an excellent and chronically persisting broad-spectra antimicrobial activity.
基金Funded by the National Natural Science Foundation of China(31170558)the Fundamental Research Funds for the Central Universities(410500006)
文摘A double-layer aluminum consisting of an aluminum core and a shellof SiO2 and polyacrylic acid was synthesized.This modified aluminum was used to improve the corrosion resistance and dispersive property of aluminum in waterborne media.TEM,FTIR,XPS,and EDX determination showed that PAA and SiO2 were coated on the surface of aluminum.Evolved hydrogen detection showed that the corrosion resistance of composite particle had been markedly improved.Maximum corrosion inhibition efficiency of SiO2 coated aluminum（SiO2@Al）was 95.1% while that of double-layer coated aluminum（PAA/SiO2@Al）was 98.8%.Meanwhile,polyacrylic acid layer improved the agglomeration of aluminum significantly.According to the dispersibility test,the particle size of 50% volume fraction [d（0.5）] of aluminum,SiO2@Aland PAA/SiO2@Alwere 42,53,and 34 μm,respectively.
基金The authors wish to acknowledge the financial support on this study from the National Natural Science Foundation of China(No.11725207).
文摘This paper investigates the dynamic response of a coated half-plane subjected to a harmonic Hertz load on the coating surface.The complex modulus is used to describe the hysteretic damping of the elastic homogeneous coating and half-plane.Using the Helmholtz decomposition and Fourier integral transform technique,we derive the stresses and displacements of the coating and half-plane from Navier5s elasticdynamic equations in the form of complex integrals.Then,the global adaptive quadrature algorithm is exploited to solve the complex integrals numerically.The effects of Young’s modulus ratio,density ratio,coating thickness,loss factor and external excitation frequency are discussed.It is found that the dynamic response of displacements and stresses becomes increasingly oscillatory with the increase in excitation frequency.
