A novel ultraviolet （UV） curable aqueous dispersion polyurethane PDHA-PEDA-PU was synthesized based on isophorone diisocyanate （IPDI）, polyester dihydric alcohol （PDHA）, dimethylol propionic acid （DMPA）, penta...A novel ultraviolet （UV） curable aqueous dispersion polyurethane PDHA-PEDA-PU was synthesized based on isophorone diisocyanate （IPDI）, polyester dihydric alcohol （PDHA）, dimethylol propionic acid （DMPA）, pentaerythritol diacrylate （PEDA）, 2-hydroxyethyl acrylate （HEA） and triethylamine （TEA）. Acrylate groups were incorporated in the side and end of PDHA-PEDA-PU chain. The C=C content in the chain can be controlled easily through the change of IPDI/PDHA/PEDA ratio. Fourier transform infrared spectroscopy （FTIR） was used to identify the structure of prepolymer, aqueous dispersion and cured polyurethane. The curing rule of the polyurethane for different C=C content has been investigated depending on the change of C=C content during the curing process. The hardness, thermal stability and scrub resistance to MEK of UV cured PDHA-PEDA-PU were also discussed for the samples with different C=C content.展开更多
Polyurethane dispersions (PUD) have diversified into a myriad of applications over the years. This has led to extensive research on both industrial and laboratory fronts as polyurethane dispersions provide liberty to ...Polyurethane dispersions (PUD) have diversified into a myriad of applications over the years. This has led to extensive research on both industrial and laboratory fronts as polyurethane dispersions provide liberty to interplay at the molecular level to diversify the properties of the product which has also led to the development of eco-friendly waterborne dispersions. Yet, waterborne PUDs are limited in their mechanical and physical properties as compared to solvent-based products. The incorporation of crosslinkers in the PUD further bolsters these properties thus improving water and solvent resistance. The incorporation of silanols increases solvent resistance and adhesion of the resultant PUD. In this work, a post crosslinking system based on the ketone-hydrazine mechanism was incorporated into the PUD thus providing the required structural reinforcement for construction application. The targeted application for this work is the use of PUDs for waterproofing.展开更多
In this paper, isophorone diisocyanate (IPDI), polyethylene glycol (PEG), dimethylolpropionic acid (DMPA) and internal crosslinking agent trimethylolpropane (TMP) were used to prepare waterborne polyurethane. And then...In this paper, isophorone diisocyanate (IPDI), polyethylene glycol (PEG), dimethylolpropionic acid (DMPA) and internal crosslinking agent trimethylolpropane (TMP) were used to prepare waterborne polyurethane. And then double-crosslinked polyurethane-acrylic composite aqueous dispersion was prepared in which polyacrylate was adopted to modify waterborne polyurethane and some special external crosslinking agents were added including silicone and trifunctional aziridine. The influence of the amounts of internal and external crosslinking agents, emulsifier, initiator on the particle size, particle size distribution, viscosity, molecular weight, as well as water adsorption ratio were studied.展开更多
With the development of the economy and improving quality of life,sunscreen products have become an indispensable part of people’s daily lives.However,traditional sunscreen products have several shortcomings,such as ...With the development of the economy and improving quality of life,sunscreen products have become an indispensable part of people’s daily lives.However,traditional sunscreen products have several shortcomings,such as sticky skin feel,clumping,and skin irritation.In addition,the price of sunscreen products is relatively high due to the expensive ingredient:UV absorbers.To solve the above problems,a film-forming agent had been added to the general sunscreen formula to synergistically improve the consumer experience without causing any adverse side effects.It is crucial to achieve sun protection factors(SPF)booster through other cheaper agents.This article mainly studies and verifies the synergistic impact of Carfil■UV35(a water-based polyurethane product)in sunscreen products and discusses its application scope.The hen’s eggchorioallantoic membrane assay(HET-CAM)test and the human patch test were used to verify its mildness to the skin.Results also showed that Carfil■UV35 could effectively improve the water resistance of sunscreen products.What’s more,the SPF improvement test shows that only 5% Carfil■UV35 can increase the SPF value from 15 to 30.In short,the research in this article can provide specific ideas for the formulation design of sunscreen products and is of great significance to the application and SPF increase of water-based polyurethane film-forming agents in sunscreen cosmetics.展开更多
Three kinds of UV-curable self-emulsified polyurethane-acrylate (PUA) prepolymer, i.e., conventional, chain extended and grafted PUAs, were prepared. The relatively small particle size of the PUA dispersions indicates...Three kinds of UV-curable self-emulsified polyurethane-acrylate (PUA) prepolymer, i.e., conventional, chain extended and grafted PUAs, were prepared. The relatively small particle size of the PUA dispersions indicates that the PUA prepolymers exhibit sufficient aqueous dispersibility. The PUA prepolymers can substantially lower the interfacial tension of water. Chain-extended PUA dispersions exhibit pseudoplastic behavior and thixotropy to a greater extent than do their conventional counterpart. The chain-extended and grafted PUA photocure to higher conversion than do the conventional PU equivalent. The results of DSC measurement suggest that there exists phase mixing between the hard and the soft segment phases for the PUAs based on PEG 400 that is the comparatively short soft segment in the prepolymer. For the PUA prepolymers based on PEG having higher M-n values, chain-extending and grafting could impede the phase separation between the hard and the soft segment domains. The adhesion, impact strength and flexibility of the photocured films were tested.展开更多
In this paper, the adsorption isotherms of two disperse dyes, C.I. Disperse Red 60 and C.I. Disperse orange 76, on two kinds of PU fibers at 90℃ were measured respectively. It was found that these adsorption isotherm...In this paper, the adsorption isotherms of two disperse dyes, C.I. Disperse Red 60 and C.I. Disperse orange 76, on two kinds of PU fibers at 90℃ were measured respectively. It was found that these adsorption isotherms followed a dual model, Nernst and Langmuir. Based on the parameters obtained in studying, the relationship between the chemical structure of dyes and their adsorption behaviors was arialyzed. Through the measurement of washing fastness of dyed sample with two dye concentrations, 1% （o.w. f） and 3% （o. w. f）, it was found that the pale shade dyeing possessed better wet-fastness than the dark. This phenomenon confirmed further that the disperse dyes were sorbed on the PU fiber by langmuir sorption and the partition mechanism.展开更多
The increasing pressure from consumers and policy makers to reduce the use of synthetic polymers,whose production contributes to the depletion of non-renewable resources and are usually non-biodegradable,has prompted ...The increasing pressure from consumers and policy makers to reduce the use of synthetic polymers,whose production contributes to the depletion of non-renewable resources and are usually non-biodegradable,has prompted the efforts to find suitable bio-based sources for the production of polymers.Vegetable oils have been a frequently spotted in this search because they are versatile,highly available and a low cost liquid biosource,which can be used in the synthesis of a wide plethora of different polymers and reactive monomers.Following the same idea of reducing the environmental stress,the traditional polyurethanes that are soluble in organic solvents have been targeted for replacement,particularly in applications such as adhesives and coatings,in which the solvent is released to the atmosphere increasing the air pollution.Instead,waterborne polyurethanes(WBPU),which are polyurethane dispersions(PUD)prepared in aqueous media,release benign water to the atmosphere during use as supported or self-standing films for different applications.In this brief review,the contributions to the development of WBPUs based on vegetable oils are discussed,focusing mainly on the contributions of the last decade.The synthesis of ionic and nonionic PUDs,their characterization and the properties of the resulting dried materials,as well as derived composite materials are considered.展开更多
Environmentally friendly, polyacrylic-based polyurethane dispersion (PUD) was synthesised using various molar ratios of polycaprolactone, dimethylolpropionic acid and tetramethyl xylene diisocyanate. Synthesis was car...Environmentally friendly, polyacrylic-based polyurethane dispersion (PUD) was synthesised using various molar ratios of polycaprolactone, dimethylolpropionic acid and tetramethyl xylene diisocyanate. Synthesis was carried out in flowing nitrogen atmosphere. The PUD’s preparations are free of NMP (n-methyl pyrrolidone), a toxic processing solvent generally used during the preparation of PUD’s. The performance of the synthesised polyurethane dispersions with varying NCO/OH molar ratio was tested on wood surface. The physical, chemical, thermal and mechanical properties such as viscosity, particle size, chemical resistance, thermal stability and taber abrasion of applied polyurethane dispersion were carried out as a function of NCO/OH molar ratio. The PUD’s preparation with NCO/OH ratio of 1.4 or 1.6 showed better performance as a wood finish and the results are described in the present study.展开更多
基金the National Natural Jiangsu Provincial Development Program acknowledged Science Foundation of China （No. 50273035） the of Science and Technology （No. BE2003105） are acknowledged.
文摘A novel ultraviolet （UV） curable aqueous dispersion polyurethane PDHA-PEDA-PU was synthesized based on isophorone diisocyanate （IPDI）, polyester dihydric alcohol （PDHA）, dimethylol propionic acid （DMPA）, pentaerythritol diacrylate （PEDA）, 2-hydroxyethyl acrylate （HEA） and triethylamine （TEA）. Acrylate groups were incorporated in the side and end of PDHA-PEDA-PU chain. The C=C content in the chain can be controlled easily through the change of IPDI/PDHA/PEDA ratio. Fourier transform infrared spectroscopy （FTIR） was used to identify the structure of prepolymer, aqueous dispersion and cured polyurethane. The curing rule of the polyurethane for different C=C content has been investigated depending on the change of C=C content during the curing process. The hardness, thermal stability and scrub resistance to MEK of UV cured PDHA-PEDA-PU were also discussed for the samples with different C=C content.
文摘Polyurethane dispersions (PUD) have diversified into a myriad of applications over the years. This has led to extensive research on both industrial and laboratory fronts as polyurethane dispersions provide liberty to interplay at the molecular level to diversify the properties of the product which has also led to the development of eco-friendly waterborne dispersions. Yet, waterborne PUDs are limited in their mechanical and physical properties as compared to solvent-based products. The incorporation of crosslinkers in the PUD further bolsters these properties thus improving water and solvent resistance. The incorporation of silanols increases solvent resistance and adhesion of the resultant PUD. In this work, a post crosslinking system based on the ketone-hydrazine mechanism was incorporated into the PUD thus providing the required structural reinforcement for construction application. The targeted application for this work is the use of PUDs for waterproofing.
文摘In this paper, isophorone diisocyanate (IPDI), polyethylene glycol (PEG), dimethylolpropionic acid (DMPA) and internal crosslinking agent trimethylolpropane (TMP) were used to prepare waterborne polyurethane. And then double-crosslinked polyurethane-acrylic composite aqueous dispersion was prepared in which polyacrylate was adopted to modify waterborne polyurethane and some special external crosslinking agents were added including silicone and trifunctional aziridine. The influence of the amounts of internal and external crosslinking agents, emulsifier, initiator on the particle size, particle size distribution, viscosity, molecular weight, as well as water adsorption ratio were studied.
文摘With the development of the economy and improving quality of life,sunscreen products have become an indispensable part of people’s daily lives.However,traditional sunscreen products have several shortcomings,such as sticky skin feel,clumping,and skin irritation.In addition,the price of sunscreen products is relatively high due to the expensive ingredient:UV absorbers.To solve the above problems,a film-forming agent had been added to the general sunscreen formula to synergistically improve the consumer experience without causing any adverse side effects.It is crucial to achieve sun protection factors(SPF)booster through other cheaper agents.This article mainly studies and verifies the synergistic impact of Carfil■UV35(a water-based polyurethane product)in sunscreen products and discusses its application scope.The hen’s eggchorioallantoic membrane assay(HET-CAM)test and the human patch test were used to verify its mildness to the skin.Results also showed that Carfil■UV35 could effectively improve the water resistance of sunscreen products.What’s more,the SPF improvement test shows that only 5% Carfil■UV35 can increase the SPF value from 15 to 30.In short,the research in this article can provide specific ideas for the formulation design of sunscreen products and is of great significance to the application and SPF increase of water-based polyurethane film-forming agents in sunscreen cosmetics.
基金Project supported by Guangdong Natural Science Foundation(No. 960019)
文摘Three kinds of UV-curable self-emulsified polyurethane-acrylate (PUA) prepolymer, i.e., conventional, chain extended and grafted PUAs, were prepared. The relatively small particle size of the PUA dispersions indicates that the PUA prepolymers exhibit sufficient aqueous dispersibility. The PUA prepolymers can substantially lower the interfacial tension of water. Chain-extended PUA dispersions exhibit pseudoplastic behavior and thixotropy to a greater extent than do their conventional counterpart. The chain-extended and grafted PUA photocure to higher conversion than do the conventional PU equivalent. The results of DSC measurement suggest that there exists phase mixing between the hard and the soft segment phases for the PUAs based on PEG 400 that is the comparatively short soft segment in the prepolymer. For the PUA prepolymers based on PEG having higher M-n values, chain-extending and grafting could impede the phase separation between the hard and the soft segment domains. The adhesion, impact strength and flexibility of the photocured films were tested.
基金The work was supported by Natural Science Foundation of Zhengjiang Province under grant number Y404314
文摘In this paper, the adsorption isotherms of two disperse dyes, C.I. Disperse Red 60 and C.I. Disperse orange 76, on two kinds of PU fibers at 90℃ were measured respectively. It was found that these adsorption isotherms followed a dual model, Nernst and Langmuir. Based on the parameters obtained in studying, the relationship between the chemical structure of dyes and their adsorption behaviors was arialyzed. Through the measurement of washing fastness of dyed sample with two dye concentrations, 1% （o.w. f） and 3% （o. w. f）, it was found that the pale shade dyeing possessed better wet-fastness than the dark. This phenomenon confirmed further that the disperse dyes were sorbed on the PU fiber by langmuir sorption and the partition mechanism.
基金the Consejo Nacional de Investigaciones Científicas y Técnicas(CONICET,Argentina)(PIP 20170100677)the Fondo para la Investigación Científica y Tecnológica(FONCYT)(PICT-2017-1318)the Universidad Nacional de Mar del Plata(UNMdP,15/G557,ING561/19)and to the Comisión de Investigaciones Científicas de la Provincia de Buenos Aires(CIC)and the Universidad Tecnológica Nacional(UTN)for their financial support.
文摘The increasing pressure from consumers and policy makers to reduce the use of synthetic polymers,whose production contributes to the depletion of non-renewable resources and are usually non-biodegradable,has prompted the efforts to find suitable bio-based sources for the production of polymers.Vegetable oils have been a frequently spotted in this search because they are versatile,highly available and a low cost liquid biosource,which can be used in the synthesis of a wide plethora of different polymers and reactive monomers.Following the same idea of reducing the environmental stress,the traditional polyurethanes that are soluble in organic solvents have been targeted for replacement,particularly in applications such as adhesives and coatings,in which the solvent is released to the atmosphere increasing the air pollution.Instead,waterborne polyurethanes(WBPU),which are polyurethane dispersions(PUD)prepared in aqueous media,release benign water to the atmosphere during use as supported or self-standing films for different applications.In this brief review,the contributions to the development of WBPUs based on vegetable oils are discussed,focusing mainly on the contributions of the last decade.The synthesis of ionic and nonionic PUDs,their characterization and the properties of the resulting dried materials,as well as derived composite materials are considered.
文摘Environmentally friendly, polyacrylic-based polyurethane dispersion (PUD) was synthesised using various molar ratios of polycaprolactone, dimethylolpropionic acid and tetramethyl xylene diisocyanate. Synthesis was carried out in flowing nitrogen atmosphere. The PUD’s preparations are free of NMP (n-methyl pyrrolidone), a toxic processing solvent generally used during the preparation of PUD’s. The performance of the synthesised polyurethane dispersions with varying NCO/OH molar ratio was tested on wood surface. The physical, chemical, thermal and mechanical properties such as viscosity, particle size, chemical resistance, thermal stability and taber abrasion of applied polyurethane dispersion were carried out as a function of NCO/OH molar ratio. The PUD’s preparation with NCO/OH ratio of 1.4 or 1.6 showed better performance as a wood finish and the results are described in the present study.
