期刊文献+
共找到10篇文章
< 1 >
每页显示 20 50 100
“Relay-mode”promoting permeation of water-based fire extinguishing agent in granular materials porous media stacks
1
作者 Kang Wang Wei Tan Liyan Liu 《Chinese Journal of Chemical Engineering》 SCIE EI CAS CSCD 2022年第7期98-112,共15页
Water-based fire extinguishing agent is the main means to deal with smoldering fires.However,due to the hydrophobic properties of the particle surface,the porous medium channel provide resistance and slow down the ext... Water-based fire extinguishing agent is the main means to deal with smoldering fires.However,due to the hydrophobic properties of the particle surface,the porous medium channel provide resistance and slow down the extinguishing agent flow during the downward permeation process.To promote the liquid permeation process in such porous media,this work studied liquid imbibition process and analyzed the oscillating and attenuating process of liquid level in capillary channel by theoretical,experimental,and numerical methods.An empirical mathematical equation was proposed to describe the oscillating process,and the effects of the capillary diameter and contact angle parameters on the transportation process were analyzed.Based on this,the“relay-mode”was proposed to promote the liquid transportation forward.Finally,the transient simulation results of liquid permeation in coal stacks showed when the liquid flowed through the channel with changed diameter from large to small ones,the transportation distance was several times longer than that through the unidiameter ones.The trend of liquid“relay-mode”in capillaries can be used to promote the permeation in granular materials porous media stacks.The relevant results also provide new thoughts to develop the water-based fire extinguishing agents and then improve the firefighting efficiency of deep-seated fire in porous media stacks. 展开更多
关键词 Granular materials Porous media Safety PERMEATION water-based fire extinguishing agent
下载PDF
Development of a SGJ-1 of Water-Based Anti-Wax Agent
2
作者 Lejun Liao Wenzhe Han +3 位作者 Qichao Cao Xintong Li Li He Song Wang 《Open Journal of Yangtze Oil and Gas》 2021年第2期72-83,共11页
The phenomenon of petroleum wax deposition is very common during oil well production. When the wax molecule condenses on the surface of the pipeline, it will hinder the exploitation of crude oil, reduce the recovery r... The phenomenon of petroleum wax deposition is very common during oil well production. When the wax molecule condenses on the surface of the pipeline, it will hinder the exploitation of crude oil, reduce the recovery rate of crude oil, and may lead to the blockage of the pipeline when it is serious, so that the oil recovery work will stop. This phenomenon can be obviously changed by using wax cleaning agent. However, the low ignition point and toxicity of oil-based wax remover are not conducive to oil recovery. Therefore, a new water-based paraffin remover SGJ-1 was developed in this paper. The best formula is: wax dispersant 15%, wetting reversion agent 1%, sodium silicate 1%, alcohol cosolvent 8% and 75% water. Condensation point, wax dissolution rate and anti-wax performance of SGJ-1 water-based dewaxing and anti-waxing agent were tested by self-assembly testing device. The experimental results show that the condensation point of SGJ-1 is -34°C, the viscosity reduction effect is good under 35°C, and the wax dissolution rate is 0.0512 g/min, The highest wax prevention rate can reach 89.58% and the wax removal and wax prevention ability is excellent. Compared with other paraffin removers, SGJ-1 can also reduce the viscosity of crude oil, so it has a good development prospect. 展开更多
关键词 water-based Anti-Wax agent Oil Well Waxing Wax Dissolution Rate Anti-Wax Rate Performance Evaluation
下载PDF
Super-amphiphobic, strong self-cleaning and high-efficiency water-based drilling fluids 被引量:2
3
作者 JIANG Guancheng NI Xiaoxiao +2 位作者 LI Wuquan QUAN Xiaohu LUO Xuwu 《Petroleum Exploration and Development》 2020年第2期421-429,共9页
Based on the amphiphobic theory on underground rock surface, a super-amphiphobic agent is developed and evaluated which can form nano-micro papilla structure on rock, filter cake and metal surface, reduce surface free... Based on the amphiphobic theory on underground rock surface, a super-amphiphobic agent is developed and evaluated which can form nano-micro papilla structure on rock, filter cake and metal surface, reduce surface free energy, prevent collapse, protect reservoir, lubricate and increase drilling speed. With this super-amphiphobic agent as the core agent, a super-amphiphobic, strong self-cleaning and high-performance water-based drilling fluid system has been developed by combining with other agents based on drilled formation, and compared with high-performance water-based drilling fluid and typical oil based drilling fluid commonly used in oilfields. The results show that the super-amphiphobic, strong self-cleaning and high-performance water-based drilling fluid has better rheology, and high temperature and high pressure filtration similar with that of oil-based drilling fluid, inhibiting and lubricating properties close to oil based drilling fluid. Besides, the super-amphiphobic system is non-toxic, safe and environmentally friendly. Field tests show this newly developed drilling fluid system can prevent wellbore collapse, reservoir damage and pipe-sticking, increase drilling speed and lower drilling cost, meeting the requirement of safe, high efficient, economic and environmentally friendly drilling. Compared with other drilling fluids, this new drilling fluid system can reduce downhole complexities by 82.9%, enhance the drilling speed by about 18.5%, lower drilling fluid cost by 39.3%, and increase the daily oil output by more than 1.5 times in the same block. 展开更多
关键词 POLYMER super-amphiphobic agent water-based drilling fluid reservoir protection wellbore stability
下载PDF
基于PRSEUS构型翼身融合机体结构多学科优化设计方法与应用
4
作者 田瑞 王海燕 +3 位作者 聂小华 罗利龙 田宇 彭涛 《西北工业大学学报》 EI CAS CSCD 北大核心 2024年第5期818-827,共10页
针对翼身融合(BWB)布局机体结构承载效率低、结构增重以及高后置背撑发动机带来的大载荷和舱内噪声等问题,基于新型材料和新型高效承载结构(PRSEUS),开展以提高结构承载效率和轻量化为目标,兼顾气动、噪声、振动及工艺等多学科约束的非... 针对翼身融合(BWB)布局机体结构承载效率低、结构增重以及高后置背撑发动机带来的大载荷和舱内噪声等问题,基于新型材料和新型高效承载结构(PRSEUS),开展以提高结构承载效率和轻量化为目标,兼顾气动、噪声、振动及工艺等多学科约束的非常规圆截面机体结构多学科优化设计方法研究。基于自适应代理模型构建技术建立了机体结构气动、噪声子系统性能分析代理模型,实现了对机体结构气动载荷、噪声性能的预测,并将气动、噪声性能的基本要求转化为几何尺寸及力学响应等约束条件,从而把多学科问题集成到一套有限元分析模型,配合高效数学规划法,解决了多学科高精度模型分析耗时问题,实现了翼身融合机体结构的多学科优化设计。通过机体结构有限元分析验证,在满足各学科约束条件前提下,结构的承载效率得到较大幅度提升,中央机体结构减质率达到了8.7%。 展开更多
关键词 翼身融合 多学科优化设计 高效承载结构 代理模型 结构减质 数学规划法
下载PDF
醛亚胺改性天冬聚脲美缝剂的制备及性能
5
作者 谢成 《山西化工》 CAS 2024年第9期34-35,111,共3页
采用醛亚胺改性天冬聚脲树脂为主体,脂肪族异氰酸酯为固化剂,研制出一种具备长活化期、快速干燥和超高固含量的改性天冬聚脲美缝剂。并考察了不同醛和用量对美缝剂性能的影响,结果表明羟基新戊醛改性摩尔分数为20%时,所制备的改性天冬... 采用醛亚胺改性天冬聚脲树脂为主体,脂肪族异氰酸酯为固化剂,研制出一种具备长活化期、快速干燥和超高固含量的改性天冬聚脲美缝剂。并考察了不同醛和用量对美缝剂性能的影响,结果表明羟基新戊醛改性摩尔分数为20%时,所制备的改性天冬聚脲美缝剂具有固含量达99.5%以上,施工时长60 min以上,表干20 min以内,该漆膜的耐黄变性、耐磨性能和力学强度表现优异,是一种优秀的环保型长效高端美缝材料。 展开更多
关键词 醛亚胺 天冬聚脲 美缝剂 长活化期 快速干燥
下载PDF
Structure, properties and application to water-soluble coatings of complex antimicrobial agent Ag-carboxymethyl chitosan-thiabendazole 被引量:5
6
作者 夏金兰 王春 +2 位作者 聂珍瑗 彭安安 管昕 《Journal of Central South University of Technology》 EI 2005年第5期526-530,共5页
The structure, properties and application to water-soluble coatings of a new complex antimicrobial agent Ag-carboxylmethyl citosan-thiabendazole (Ag-CMCTS-TBZ) prepared from different materiel ratios were reported. ... The structure, properties and application to water-soluble coatings of a new complex antimicrobial agent Ag-carboxylmethyl citosan-thiabendazole (Ag-CMCTS-TBZ) prepared from different materiel ratios were reported. The silver ions were preferably coordinated with the free-NH2 groups and the -OH groups of secondary alcohol and carboxyl in CMCTS. TBZ preferably bonded to carboxyl group in CMCTS by electrostatic force and hydrogen bonding. Increase in silver ions content in the complex agent improved to some limited extent the antibacterial activity, but enhanced coloring and cost of the complex agent. Increase in TBZ content resulted in increase of antifungal activity, but decrease of water solubility of the complex agent. The antimicrobial MICs of the complex agent to Esherichia coil, Staphylococcus aureus, Candida albicans, Aspergillus niger, Mucor sp. were 20 -80, 15 -60, 20 - 55, 40 - 250, and 400 - 1700 mg/kg, respectively. Addition of 0.1% of this complex agent to acrylic emulsion paint made the paint without substantial change in color, luster, viscosity, odor or pH value, but with an excellent and chronically persisting broad-spectra antimicrobial activity. 展开更多
关键词 complex antimicrobial agent carboxylmethyl chitosan silver THIABENDAZOLE water-based acrylic emulsion paint water-soluble antimicrobial coating
下载PDF
New Nano Polymer Materials for Composite Exterior-Wall Coatings
7
作者 Yue Yu 《Fluid Dynamics & Materials Processing》 EI 2023年第10期2681-2694,共14页
A triethylenetetramine epoxy mixture was synthesized through the reaction of a low-molecular-weight liquid epoxy resin with triethylenetetramine(TETA).Then triethyltetramine(TETA)was injected dropwise into a pro-pylen... A triethylenetetramine epoxy mixture was synthesized through the reaction of a low-molecular-weight liquid epoxy resin with triethylenetetramine(TETA).Then triethyltetramine(TETA)was injected dropwise into a pro-pylene glycol methyl ether(PM)solution for chain extension reaction.A hydrophilic andflexible polyether seg-ment was introduced into the hardener molecule.The effects of TETA/DGEPG,reaction temperature and reaction time on the epoxy conversion of polyethylene glycol diglycidyl ether(DGEPG)were studied.In addition,several alternate strategies to add epoxy resin to the high-speed dispersion machine and synthesize MEA DGEBA adduct(without catalyst and with bisphenol A diglycidyl ether epoxy resin)were compared.It was found that the higher the molecular weight of triethylenetetramine,the longer the chain segment of the surface active molecule.When the equivalence ratio of amine hydrogen and epoxy group is low,the stability of lotion is good.When the ratio of amine hydrogen to epoxy group is large,the content of triethylenetetramine is small.The main objective of this study is the provision of new data and knowledge for the development of new materials in the coating and electronic industry. 展开更多
关键词 water-based coating triethylenetetramine(TETA) surface active agent nano polymer materials TRIETHYLENETETRAMINE
下载PDF
瓷砖美缝剂对室内空气释放污染物的测定 被引量:1
8
作者 王成 王向平 +1 位作者 付永刚 刘虹 《工程质量》 2019年第8期38-41,46,共5页
室内装修材料和家具是室内空气污染的最主要来源。各种材料对室内空气污染贡献率不等。本文采用气质联仪定性鉴定与顶空进样气相色谱定量分析相结合的方法对立邦牌快涂宝幻彩美缝剂挥发成分进行了测定,并作图表分析了立邦牌快涂宝幻彩... 室内装修材料和家具是室内空气污染的最主要来源。各种材料对室内空气污染贡献率不等。本文采用气质联仪定性鉴定与顶空进样气相色谱定量分析相结合的方法对立邦牌快涂宝幻彩美缝剂挥发成分进行了测定,并作图表分析了立邦牌快涂宝幻彩美缝剂在室温条件下自然释放污染物的种类及散发率的衰减规律;提出了室内装修时使用美缝剂后的入住时间的建议。 展开更多
关键词 美缝剂 室内空气污染 装修材料
下载PDF
环保性中空导流夹芯缝编纤维复合增强材料生产工艺初探
9
作者 宣维栋 朱忠裕 《玻璃纤维》 CAS 2016年第3期7-10,共4页
通过对中空导流夹芯缝编纤维复合增强材料生产工艺中夹芯层生产工艺、浸润剂配方、缝编复合工艺、导流性能测试等方面的研究,提供了适用于闭模成型工艺用的新型缝编纤维复合增强材料生产工艺,并提出了进一步改进的方向。研究结果表明,... 通过对中空导流夹芯缝编纤维复合增强材料生产工艺中夹芯层生产工艺、浸润剂配方、缝编复合工艺、导流性能测试等方面的研究,提供了适用于闭模成型工艺用的新型缝编纤维复合增强材料生产工艺,并提出了进一步改进的方向。研究结果表明,夹芯材料主动放卷及同步技术的应用可以进一步减少夹芯材料变形,但目前对于夹芯材料卷与卷之间的衔接采用的搭接工艺,会造成一定的浪费。 展开更多
关键词 夹芯材料 浸润剂 缝编复合工艺 导流性能
下载PDF
亲水性环氧树脂及其在美缝剂领域的应用研究 被引量:2
10
作者 李婧婧 《热固性树脂》 CAS CSCD 北大核心 2022年第4期53-56,共4页
开发了100%固体质量分数的亲水性环氧树脂CYDW-125,通过水中溶解性、乳液离心稳定性和粒径测试研究了CYDW-125树脂的性能,并与CYD-128树脂的力学性能作了对比。对其进一步改性,研制出双组分水性美缝剂用亲水性环氧树脂YR-909N和亲水性... 开发了100%固体质量分数的亲水性环氧树脂CYDW-125,通过水中溶解性、乳液离心稳定性和粒径测试研究了CYDW-125树脂的性能,并与CYD-128树脂的力学性能作了对比。对其进一步改性,研制出双组分水性美缝剂用亲水性环氧树脂YR-909N和亲水性固化剂CYDHD-282,并对该体系清漆的性能作了测试。结果表明:CYDW-125具有优异的亲水性,固化物拉伸强度、冲击强度、弯曲强度均比CYD-128高,具有良好的柔韧性,大幅改善了双酚A环氧树脂的脆性。YR-909N/CYDHD-282体系不含水,综合性能优良,稠度合适,满足水性美缝剂的应用要求,可为水性美缝剂行业的发展提供新思路。 展开更多
关键词 亲水性环氧树脂 粒径 柔韧性 水性美缝剂
原文传递
上一页 1 下一页 到第
使用帮助 返回顶部