Water-saving Technologies,Solar Green House and Ecological Rehabilitation in Minqin Oasis of Gansu Province,China

Land degradation and desertification have becom severe environmental problems in arid areas due to excessive use of water resources. It is urgent to reduce agricultural water use fo ecological rehabilitation, which may result in a decrease in agri cultural production and farmer's welfare. This paper focused on the impacts of some main measures including extensions of water saving irrigation, expanding solar green house and increasing off farm employment, which are generally recognized to be importan to alleviate water shortage and poverty. A bio-economic model i applied taking Minqin Oasis in Gansu Province as a case study site. Simulation results showed that the effect of expanding sola greenhouse was more positive than other ones so it drew more attention. On the view of the different effects between each irriga tion zone, mixed policy patterns suitable for them are suggested In Baqu, expanding solar greenhouse should be the most impor tant, auxiliary with encouraging pipe irrigation. Inversely, with regard to Quanshan, the major attention should be paid to subsidy for pipe irrigation and it would be better to supply the off-farm employment opportunities to the households in Huqu, where the expanding of solar greenhouse should also be summoned. Finally it should be noted that farmer's income would only resume to 90% of the current level in the short run by putting more effort into lo cal policies. Thus, the ecological compensation is needed to ensure farmer's welfare.

Coupling effect on the thermal hazard assessment of hazardous chemical materials via calorimetric technologies and simulation approaches

The coupling effect of heat absorption and release exists in the thermal decomposition of a few chemical materials.However,the impact of the above coupling on thermal hazard assessment is not considered in the literature studies.In this work,nitroguanidine(NQ)and 1,3,5-trinitro-1,3,5-triazine(RDX)are selected as representative materials to explore the influence of the coupling effect on the thermal hazard assessment of chemical materials.The linear heating experiments of NQ and RDX are carried out by a microcalorimeter and synchronous thermal analyser.The thermal decomposition curves are decoupled by advanced thermokinetics software.The thermal decomposition and kinetic parameters before and after decoupling are calculated.The results of TG experiment show that both NQ and RDX began to lose mass during the endothermic stage.The endothermic melting and exothermic decomposition of NQ and RDX are coupled within this stage.The coupling effect has different degrees of influence on its initial decomposition temperature and safety parameters.Compared with the parameters in the coupling state,the initial decomposition temperature and adiabatic induction period after decoupling decrease.The self-accelerating decomposition temperature increases,and internal thermal runaway time decreases.In the thermal hazard assessment of chemical materials with coupling effects,the calculated parameters after decoupling should be taken as an important safety index。

Exploring Nutritional Compositions,Volatile Compounds,Health Benefits,Emerging Processing Technologies,and Potential Food Products of Glutinous Rice:A Review

Glutinous rice(Oryza sativa var.glutinosa)stands out as one of the most popular rice varieties globally,amidst thousands of rice cultivars.Its increasing popularity is attributed to its rich nutritional compositions and health benefits.This review aims to summarize the nutritional compositions,volatile compounds,and health benefits of glutinous rice.Further,in-depth studies are necessary to explore the utilization of glutinous rice in enhancing processing technologies and developing new food products.Glutinous rice has been shown to possess numerous health benefits,including antioxidant activity,bioactive compounds,anti-cancer properties,anti-inflammatory effects,anti-diabetic potential,and cholesterol-lowering effects.Besides its nutritional compositions,the major volatile compounds identified in glutinous rice could serve as a functional food for human consumption.Emerging processing technologies related to glutinous rice are elaborated to improve the latest developments for incorporating them into various food products.

Measuring Pedestrian Stress Response (MPSR) Using Wearable Technologies

Walkability is an essential aspect of urban transportation systems. Properly designed walking paths can enhance transportation safety, encourage pedestrian activity, and improve community quality of life. This, in turn, can help achieve sustainable development goals in urban areas. This pilot study uses wearable technology data to present a new method for measuring pedestrian stress in urban environments and the results were presented as an interactive geographic information system map to support risk-informed decision-making. The approach involves analyzing data from wearable devices using heart rate variability (RMSSD and slope analysis) to identify high-stress locations. This data-driven approach can help urban planners and safety experts identify and address pedestrian stressors, ultimately creating safer, more walkable cities. The study addresses a significant challenge in pedestrian safety by providing insights into factors and locations that trigger stress in pedestrians. During the pilot study, high-stress pedestrian experiences were identified due to issues like pedestrian-scooter interaction on pedestrian paths, pedestrian behavior around high foot traffic areas, and poor visibility at pedestrian crossings due to inadequate lighting.

Combined Insights from Leachate Structure and Microstructure Characteristics for Eating Quality of Convenience Rice Processed by Super-Heated and Pressurized Steam Technologies

Convenience rice has become widely popular due to its easy availability for cooking. This study investigated the starch structure and composition of leachate and the microstructure of reheated convenience rice using novel processing technologies: super-heated steaming(SHS), auto-electric cooking(AEC), and pressurized-steam cooking(PSC). Additionally, the effect of two different target water contents(58% and 63%) was also evaluated. The PSC_63% sample had the highest total solids and amylopectin amount in the leachate. The amylopectin amount in the leachate differed significantly based on the targeted water content. Morphological characterization revealed that the swelling of starch and the coated layer on the surface of rice grains were most pronounced in the PSC_63% sample due to the pressure processing. The textural hardness of the AEC_58% sample was much higher than that of the other samples. The PSC_63% sample had the highest textural adhesiveness value, which can be attributed to the highest amylopectin amount in the leachate. Sensory characterization showed that the PSC_63% sample had the highest glossiness, whiteness, moistness, and overall acceptability. The principal component analysis score plots presented substantial differences in the leachate and textural and sensory characteristics of reheated convenience rice among the different processing technologies.

Ad Blockers & Online Privacy: A Comparative Analysis of Privacy Enhancing Technologies (PET)

Online tracking mechanisms employed by internet companies for user profiling and targeted advertising raise major privacy concerns. Despite efforts to defend against these mechanisms, they continue to evolve, rendering many existing defences ineffective. This study performs a large-scale measurement of online tracking mechanisms across a large pool of websites using the OpenWPM (Open Web Privacy Measurement) platform. It systematically evaluates the effectiveness of several ad blockers and underlying Privacy Enhancing Technologies (PET) that are primarily used to mitigate different tracking techniques. By quantifying the strengths and limitations of these tools against modern tracking methods, the findings highlight gaps in existing privacy protections. Actionable recommendations are provided to enhance user privacy defences, guide tool developers and inform policymakers on addressing invasive online tracking practices.

Ecological Restoration Technologies of Urban Artificial Landscape Lakes

Aiming at the problems of water pollution and ecological environment degradation in urban artificial landscape lakes,the ecological restoration technologies of artificial landscape lakes at home and abroad were studied to provide some reference for the ecological restoration of urban artificial landscape lakes in China.

Energy-Saving Construction Technologies for Buildings

The development of the construction industry is shifting towards low-carbon construction,so it is necessary to improve and optimize related construction concepts,methods,and processes.By improving resource and energy control efficiency in building projects,minimizing construction waste,and reducing environmental impact,a foundation for the sustainable development of the industry can be established.This paper mainly analyzes the significance of low-carbon energy-saving construction technology and the control factors of construction,summarizes the status quo of the development of building energy-saving construction,and puts forward strategies for applying building energy-saving construction technology.These strategies serve to achieve low-carbon and energy-saving goals to promote the healthy development of energy-saving construction.

Pollution source identification methods and remediation technologies of groundwater: A review

Groundwater is an important source of drinking water.Groundwater pollution severely endangers drinking water safety and sustainable social development.In the case of groundwater pollution,the top priority is to identify pollution sources,and accurate information on pollution sources is the premise of efficient remediation.Then,an appropriate pollution remediation scheme should be developed according to information on pollution sources,site conditions,and economic costs.The methods for identifying pollution sources mainly include geophysical exploration,geochemistry,isotopic tracing,and numerical modeling.Among these identification methods,only the numerical modeling can recognize various information on pollution sources,while other methods can only identify a certain aspect of pollution sources.The remediation technologies of groundwater can be divided into in-situ and ex-situ remediation technologies according to the remediation location.The in-situ remediation technologies enjoy low costs and a wide remediation range,but their remediation performance is prone to be affected by environmental conditions and cause secondary pollution.The ex-situ remediation technologies boast high remediation efficiency,high processing capacity,and high treatment concentration but suffer high costs.Different methods for pollution source identification and remediation technologies are applicable to different conditions.To achieve the expected identification and remediation results,it is feasible to combine several methods and technologies according to the actual hydrogeological conditions of contaminated sites and the nature of pollutants.Additionally,detailed knowledge about the hydrogeological conditions and stratigraphic structure of the contaminated site is the basis of all work regardless of the adopted identification methods or remediation technologies.

The Appeals,Dilemmas,and Pathways of Enabling Rural Teachers’Professional Development Through Emerging Technologies

With the rapid advancements in technology,especially in digitalization and intelligence,numerous modern technologies have poured into rural schools,effectively improving their informatization conditions.Nevertheless,these technologies remain detached from rural teachers,failing to significantly enhance the quality of education and teaching in rural areas.Rural education is a crucial aspect of ensuring balanced development in education.The question of how to enhance rural teachers’technological application abilities and fully leverage the positive role of technology in rural education and teaching has become a significant topic of current research on rural education issues.To better address this question,this study conducted a thorough examination of the specific appeals of rural teachers in the process of technology enablement.It was discovered that rural teachers generally face dilemmas such as insufficient technological application abilities,difficulties in obtaining quality teaching resources,and the lack of continuous technical support and update mechanisms.Based on these findings,specific pathways such as strengthening rural teacher training,optimizing the allocation of educational resources,and establishing mechanisms for continuous technical support and updates are proposed to aid in the high-quality development of rural education.

Application of Key Technologies in Green School Buildings: Taking Sino-German Future City Primary School as an Example

Green building is a manifestation of the response to the national“dual carbon”strategy.With the large-scale promotion of green buildings,the country has successively issued multiple evaluation standards for green buildings.Schools are places for preaching,teaching,and solving doubts,and the campus environment plays an important role in improving students’learning efficiency and promoting their physical and mental health.This article is based on the“Green Building Evaluation Standards”GB/T 50378-2019,analyzing and exploring the integration and application of key technologies in green schools,providing reference for green building designers.

Advanced Technologies for Volatile Organic Compound (VOC) Emission Treatment: An Overview

This paper presents a comprehensive overview of various advanced technologies employed in the treatment of volatile organic compounds(VOCs),which are crucial pollutants in industrial emissions.The study explores different methods,including direct combustion,thermal combustion,catalytic combustion,low-temperature plasma purification,photocatalytic purification,membrane separation,and adsorption methods.Each technology is critically analyzed for its operational principles,efficiency,and applicability under different conditions.Special attention is given to adsorption concentration and catalytic combustion parallel method,highlighting its efficiency in treating low-concentration,high-volume VOC emissions.The paper also delves into the advantages and limitations of each method,providing insights into their effectiveness in various industrial scenarios.The study aims to offer a detailed guide for selecting appropriate VOC treatment technologies,contributing to enhanced environmental protection and sustainable industrial practices.

Technical development of operational in-situ marine monitoring and research on its key generic technologies in China

In China,operational in-situ marine monitoring is the primary means of directly obtaining hydrological,meteorological,and oceanographic environmental parameters across sea areas,and it is essential for applications such as forecast of marine environment,prevention and mitigation of disaster,exploitation of marine resources,marine environmental protection,and management of transportation safety.In this paper,we summarise the composition,development courses,and present operational status of three systems of operational in-situ marine monitoring,namely coastal marine automated network station,ocean data buoy and voluntary observing ship measuring and reporting system.Additionally,we discuss the technical development in these in-situ systems and achievements in the key generic technologies along with future development trends.

International experience of carbon neutrality and prospects of key technologies:Lessons for China

Carbon neutrality(or climate neutrality)has been a global consensus,and international experience exchange is essential.Given the differences in the degree of social development,resource endowment and technological level,each country should build a carbon-neutral plan based on its national conditions.Compared with other major developed countries(e.g.,Germany,the United States and Japan),China's carbon neutrality has much bigger challenges,including a heavy and time-pressured carbon reduction task and the current energy structure that is over-dependent on fossil fuels.Here we provide a comprehensive review of the status and prospects of the key technologies for low-carbon,near-zero carbon,and negative carbon emissions.Technological innovations associated with coal,oil-gas and hydrogen industries and their future potential in reducing carbon emissions are particularly explained and assessed.Based on integrated analysis of international experience from the world's major developed countries,in-depth knowledge of the current and future technologies,and China's energy and ecological resources potential,five lessons for the implementation of China's carbon neutrality are proposed:(1)transformation of energy production pattern from a coal-dominated pattern to a diversified renewable energy pattern;(2)renewable power-to-X and large-scale underground energy storage;(3)integration of green hydrogen production,storage,transport and utilization;(4)construction of clean energy systems based on smart sector coupling(ENSYSCO);(5)improvement of ecosystem carbon sinks both in nationwide forest land and potential desert in Northwest China.This paper provides an international perspective for a better understanding of the challenges and opportunities of carbon neutrality in China,and can serve as a theoretical foundation for medium-long term carbon neutral policy formulation.

Identifying grey-rhino in eminent technologies via patent analysis

Purpose:Following the typical features of the grey-rhino event as predictability and profound influence,we attempt to find a special pattern called the grey-rhino in eminent technologies via patent analysis.Design/methodology/approach:We propose to combine triadic patent families and technology life cycle to define the grey-rhino model.Firstly,we design the indicator rhino-index Rh=ST/SP and descriptor sequence{Rh},where ST and SP are the accumulative number of triadic patent families and all patent families respectively for a specific technology.Secondly,according to the two typical features of the grey-rhino event,a grey-rhino is defined as a technology that meets both qualitative and quantitative conditions.Qualitatively,this technology has a profound influence.Quantitatively,in the emerging stage,Rh≥Rae,where Rae is the average level of the proportion of triadic patent families.Finally,this model is verified in three datasets,namely Encyclopedia Britannica’s list for the greatest inventions(EB technologies for short),MIT breakthrough technologies(MIT technologies)and Derwent Manual Code technologies(MAN technologies).Findings:The result shows that there are 64.71%EB technologies and 50.00%MIT technologies meeting the quantitative standard of the grey-rhino model,but only 14.71%MAN technologies fit the quantitative standard.This falling trend indicates the quantitative standard of the grey-rhino model is reasonable.EB technologies and MIT technologies have profound influence on society,which means they satisfy the qualitative standard of the grey-rhino model.Hence,64.71%EB technologies and 50.00%MIT technologies are grey-rhinos.In 14.71%MAN technologies meeting the quantitative standard,we make some qualitative judgments and deem U11-A01A,U12-A01A1A,and W01-A01A as grey-rhino technologies.In addition,grey-rhinos and non-grey-rhinos have some differences.Rh values of grey-rhinos have a downward trend,while Rh values of non-grey-rhinos have a contrary trend.Rh values of grey-rhinos are scattered relatively in the early stage and centralize gradually,but non-grey-rhinos do not have this feature.Research limitations:There are four main limitations.First,if a technology satisfies the quantitative standard of the model,it is likely to be a grey-rhino but expert judgments are necessary.Second,we don’t know why it will be eminent,which involves technical contents.Thirdly,we did not consider the China National Intellectual Property Administration(CNIPA)and the German Patent and Trademark Office(DPMA)which also play important roles in worldwide patents,so we hope to expand our study to the CNIPA and the DPMA.Furthermore,we did not compare the rhino-index with other patent indicators.Practical implications:If a technology meets the quantitative standard,this can be seen as early warning signals and the technology may become a grey-rhino in the future,which can catch people’s attention in the emerging stage and make people seize the technical opportunity early.Originality/value:We define and verify a new pattern called the grey-rhino model in eminent technologies.

Key technologies and applications of intelligent dispatching command for high-speed railway in China

Purpose–The intelligent Central Traffic Control(CTC)system plays a vital role in establishing an intelligent high-speed railway(HSR)system.As the core of HSR transportation command,the intelligent CTC system is a new HSR dispatching command system that integrates the widely used CTC in China with the practical service requirements of intelligent dispatching.This paper aims to propose key technologies and applications for intelligent dispatching command in HSR in China.Design/methodology/approach–This paper first briefly introduces the functions and configuration of the intelligent CTC system.Some new servers,terminals and interfaces are introduced,which are plan adjustment server/terminal,interface for automatic train operation(ATO),interface for Dynamic Monitoring System of Train Control Equipment(DMS),interface for Power Supervisory Control and Data Acquisition(PSCADA),interface for Disaster Monitoring,etc.Findings–The key technologies applied in the intelligent CTC system include automatic adjustment of train operation plans,safety control of train routes and commands,traffic information data platform,integrated simulation of traffic dispatching and ATO function.These technologies have been applied in the Beijing-Zhangjiakou HSR,which commenced operations at the end of 2019.Implementing these key intelligent functions has improved the train dispatching command capacity,ensured the safe operation of intelligent HSR,reduced the labor intensity of dispatching operators and enhanced the intelligence level of China’s dispatching system.Originality/value–This paper provides further challenges and research directions for the intelligent dispatching command of HSR.To achieve the objectives,new measures need to be conducted,including the development of advanced technologies for intelligent dispatching command,coping with new requirements with the development of China’s railway signaling system,the integration of traffic dispatching and train control and the application of AI and data-driven modeling and methods.

Electronic Technologies in Communications Engineering

The influence of modern electronic technology on communication engineering is explained in this paper.Based on the development status of communication engineering,the characteristics and application strategies of modern electronic technology in communication engineering are discussed,including the optimization and improvement of wireless communication system.

A frequency servo SoC with output power stabilization loop technology for miniaturized atomic clocks

A frequency servo system-on-chip(FS-SoC)featuring output power stabilization technology is introduced in this study for high-precision and miniaturized cesium(Cs)atomic clocks.The proposed power stabilization loop(PSL)technique,incorporating an off-chip power detector(PD),ensures that the output power of the FS-SoC remains stable,mitigating the impact of power fluctuations on the atomic clock's stability.Additionally,a one-pulse-per-second(1PPS)is employed to syn-chronize the clock with GPS.Fabricated using 65 nm CMOS technology,the measured phase noise of the FS-SoC stands at-69.5 dBc/Hz@100 Hz offset and-83.9 dBc/Hz@1 kHz offset,accompanied by a power dissipation of 19.7 mW.The Cs atomic clock employing the proposed FS-SoC and PSL obtains an Allan deviation of 1.7×10^(-11) with 1-s averaging time.

Management practices and technologies for efficient biological sample collection from domestic animals with special reference to Indian field conditions

Management strategies and the use of advanced technologies are equally important for determining the sample number and sampling frame for successful field sampling for animal disease prevalence studies.The quality of the biological samples collected in the field has a direct bearing on the integrity of the data generated,prevalence estimates and subsequent policy decisions on disease control.Hence,compromising the quality of biological samples collected in the field could potentially undermine the priority setting principles in disease control strategies.Biological samples collected from domestic animals in the field are precious materials and require meticulous planning for sample collection,sample storage in the field,transportation,and storage in the laboratory.Poorly managed field sampling has a significant detrimental impact on the sample quality and quantity and directly affects the accuracy of disease prevalence data.A bad choice of sampling tools,containers,storage and transport all have a negative impact on the integrity of the sample and consequently have an impact on the outcome.Over the last two years,as part of our one health animal sampling work in ndia,we have observed challenges and opportunities in the field sampling of animals for disease prevalence studies.This paper aims to provide information on management practices and technologies for efficient biological sample collection from the field and ensure that good quality samples are available fortesting.

Impacts of Agroecological Technologies Adoption on Agricultural Yield and Income for Millet and Cowpea Producers from Maradi and Zinder Regions in Niger

This article assesses the impacts of agroecological technologies adoption on the agricultural yields and incomes for millet and cowpea producers in Niger from both Maradi and Zinder regions. For this purpose, a set of descriptive statistics methods are applied to data collected from 1950 producers from 80 villages. Results indicate that the density of semi, HPK variety, compost and IT 90 variety are the most adopted agroecological technologies with respective adoption rates of 87%, 69%, 64.3% and 64%. Moreover, results show that millet producers that adopted agro-ecological technologies have on average multiplied by 2.00 and 2.96 times their production, in Zinder and Maradi regions respectively. Besides, findings reveal that cowpea producers that adopted agro-ecological technologies have on average multiplied by 2.00 and 3.21 times their production, in Zinder and Maradi regions respectively. Finally, results support that the improvement in millet and cowpea yields has led to increase in producers’ total income by 2 and 3 times respectively in Zinder and Maradi regions. Since agroecological technologies improve agricultural yields and income, we suggest policy makers to recommend their adoption and diffusion.