Effect of Nano Al Pigment on the Anticorrosive Performance of Waterborne Epoxy Coatings

This paper presents the results regarding the effect of nano aluminum powder pigment concentration on the protective properties of waterborne epoxy films in 3.5 wt pct NaCl solution. The anticorrosive performance of the coatings with 0.5, 1, and 3 wt pct pigments and none pigment were investigated using electrochemical impedance spectroscopy （EIS）, scanning electron microscopy （SEM） and Raman spectroscopy techniques. The results show that adding appropriate amount of nano-aluminium powder pigment can enhance the barrier properties of the epoxy coating, which is attributed to the surface effect of nanoparticles and the compatibility of the pigment with the waterborne epoxy coatings.

Amino-functionalized Ti_(3)C_(2)T_(x) with anti-corrosive/wear function for waterborne epoxy coating

Two-dimensional Ti_(3)C_(2)T_(x) flakes have great application potential in various areas due to their optical,electronic,electrochemical and mechanical properties,but their anti-corrosion and wear-resistance performance were not well understood.The difficulties in achieving good dispersity and interface interaction of inorganic additives in organic coatings hinder the incorporation of Ti_(3)C_(2)T_(x) into the epoxy coating.Here,few-layered Ti_(3)C_(2)T_(x) sheets with amino-functionalization were prepared,and as reinforced-additives were added into the waterborne epoxy coating.Anti-corrosion and tribological properties of as-prepared composite coatings were investigated in detail.The results reveal that the composite coating with 0.5 wt.%amino-functionalized Ti_(3)C_(2)T_(x) sheets shows excellent corrosion protection(the lowest frequency impedance was 3.12×10^(9) cm^(2))and wear resistance(wear rate was reduced by 72.74%).The greatly improving performance of composite coatings mainly depends on:(a)good dispersity and compatibility of amino-functionalized Ti_(3)C_(2)T_(x) in organic matrix,(b)high adhesion strength between coating and metal substrate and(c)the intrinsic properties of Ti3C2Tx sheets.The work provides a good path for applications of MXene as multifunctional additives.

Corrosion Resistance of Graphene-Reinforced Waterborne Epoxy Coatings

Graphene （G） was dispersed uniformly in water and used as an inhibitor in waterborne epoxy coatings. The effect of dispersed G on anticorrosion performance of epoxy coatings was evaluated. The composite coatings displayed outstanding barrier properties against H20 molecule compared to the neat epoxy coating. Open circuit potential （OCP）, Tafel and electrochemical impedance spectroscopy （EIS） analysis confirmed that the corrosion rate exhibited by composite coatings with 0.5 wt% G was an order of magnitude lower than that of neat epoxy coating. Salt spray test results revealed superior corrosion resistance offered by the composite coating.

A facile approach to fabricating graphene/waterborne epoxy coatings with dual functionalities of barrier and corrosion inhibitor

A facile and environmentally-friendly method is developed to prepare graphene/waterborne epoxy(WEP)composite coatings.The graphene nanosheets are produced with electrochemical-exfoliation in the solution containing surfactants,cetyl trimethyl ammonium bromide(CTAB)and sodium dodecyl sulfate(SDS).The nanosheets containing solution thus formed are subjected to a quick dialysis and then directly used as a diluent for WEP without any further treatment.This preparation method overcomes the commonly identified problems of aggregations and‘corrosion promotion’effect associated with graphene,and increases the impedance of the composite coatings by more than two orders of magnitude.The analysis of anticorrosion performance suggested that the presence of surfactants not only improves the dispersibility of graphene nanosheets but also endows the composite coatings with both barrier and corrosion inhibition capabilities.The strategy reported herein may pave the path to the large-scale production of graphene anticorrosion coatings.

Facile recycling of anhydride-cured epoxy thermoset under mild conditions with multifunctional hydrazine hydrate

Environmental economics is accelerating the urgency to develop recycling technologies for the ever-growing quantity of discarded thermoset polymers.Herein,we developed a mild and energy-saving pro-cess for high-eficiency degradation and reuse of anhydride-cured epoxy thermoset with the aid of hy-drazine hydrate.The degradation degree of the epoxy resin reached 99.6%at 120℃ within a short time of 60min.During the reaction,the ester bonds in the cross-linked network were selectively cleaved by the amination of hydrazine hydrate,and the epoxy resin was fully converted to new monomers that con-tained hydrazide and hydroxyl groups,respectively.Moreover,the degradation mechanism of the epoxy resin in hydrazine hydrate was studied and a nucleation model was utilized to predict the actual degra-dation behavior of the system.Finally,the degradation products can be directly mixed with epoxy precur-sor to prepare a new waterborne epoxy coating with good comprehensive properties.This work not only demonstrates a new way to realize the efficient degradation of epoxy resins,but also provides a facile and efficient recycling protocol for thermosets.