Removal of Dye Using Lignin-Based Biochar/Poly(ester amide urethane)Nanocomposites from Contaminated Wastewater

The pursuit of incorporating eco-friendly reinforcing agents in polymer composites has accentuated the exploration of various natural biomass-derived materials.The burgeoning environmental crisis spurred by the discharge of synthetic dyes into wastewater has catalyzed the search for effective and sustainable treatment technologies.Among the various sorbent materials explored,biochar,being renewable,has gained prominence due to its excellent adsorption properties and environmental sustainability.It has also emerged as a focal point for its potential to replace other conventional reinforcing agents,viz.,fumed silica,aluminum oxide,treated clays,etc.This study introduces a novel class of polymer nanocomposites comprising of lignin-based biochar particles and poly(ester amide urethane)matrix via a feasible method.The structural evaluation of these nanocomposites was accomplished using Fourier-transform infrared spectroscopy,X-ray photoelectron spectroscopy,and powder X-ray diffraction.The polymer nanocomposites exhibited superior mechanical properties with an increment in tensile strength factor by 45%in comparison to its pristine matrix,along with an excellent toughness value of 90.22 MJm^(−3)at a low loading amount of only 1 wt%.The composites showed excellent improvement in thermal properties with a sharp rise in the glass transition temperature(Tg)value from−28.15℃to 84℃,while also championing sustainability through inherent biodegradability attributes.Beyond their structural prowess,these polymer nanocomposites demonstrated excellent potential as adsorbents,displaying efficient removal of malachite green and tartrazine dyes from aqueous systems with a removal efficiency of 87.25%and 73.98%,respectively.The kinetics study revealed the pseudo second order model to be the precision tool to assess the dye removal study.Complementing this,the Langmuir adsorption isotherm provided a framework to assess the sorption features of the polymer nanocomposites.Overall,these renewable biochar integrated polymer matrices boast remarkable recovery capabilities up to seven cycles of usage with an excellent dye recovery percentage of 95.21%for the last cycle,thereby defining sustainability as well as economic feasibility.

LARGELY IMPROVED BLOOD COMPATIBILITY OF POLYURETHANE BY BLENDING WITH FLUORINATED PHOSPHATIDYLCHOLINE POLYURETHANE

The improvement of biocompatibility of polyurethanes was investigated.The results demonstrate that the blood compatibility of polyurethanes can be further improved by just simply mixing with the fluorinated phosphatidylcholine poly(carbonate urethane)s(FPCPCUs).The solution blending was done by mixing poly(ether urethane)(PEU)with FPCPCU in different compositions.An increased blood compatibility of the blend films was observed with the increase of FPCPCU content,and when FPCPCU content reached to 40 wt%(40F...

SELF-ASSEMBLED MICRO-DOMAINS ON THE UPPERMOST SURFACE OF FLUORINATED POLY(CARBONATE URETHANE)S WITH FLUORINATED SIDE CHAIN ATTACHED ON HARD SEGMENTS

The surface phase separated structure of polyurethanes is always desired due to the advantage of better biocompatibility, compared with the homogeneous one. The key issue is how to control and characterize the surface morphology. In this work, we report the uppermost surface morphology of fluorinated poly(carbonate urethane)s with fluorinated side chains attached to hard segments as studied by AFM, XPS and contact angle measurement. A self-assembled micro-domain with the fluorinated side chain standing up on the uppermost surface has been proposed for polyurethane with higher fluorinated content, based on the result obtained.

Silk Fibroin-modified Poly(butadiene) urethane Films and Their Effects on Fibroblast Viability

Surface-modified poly(butadiene)urethane (PBTU) films with silk fibroin (SF) were prepared by simple chemical method under the normal temperature. The physical properties and biological behaviour of the SF-modified PBTU film were evaluated. The results showed that the SF-modified PBTU films kept the tenacity and pliability very well, and could overcome rigid and brittle weaks of silk fibroin films. The morphology of SF in the PBTU film was dendritic aggregations, and the water-contact angle measurement indicated that the surface hydrophilicity of modified films was apparently enhanced. The biocompatibility of PBTU films was improved due to the change of surface components. The degree of platelet adhesion and the cell viability of rat embryo dermal fibroblasts seeded on PBTU films, SF films, and SF-modified PBTU films were measured by counting platelets before and after they contacted the films and MTT assay, respectively. The results indicated that platelet adhesion resistance and cell viability on the modified film were greatly superior to those on the PBTU film and the compound interface had good stability in the air.

Synthesis and Characterization of a Novel Aqueous Dispersion Poly[urethane-(disperse blue 14)-urethane] Dye

A novel polymeric dye of aqueous dispersion poly[urethane-(disperse blue 14)-urethane] was synthesized based on poly(propylene glycol) (PPG), 2, 4-tolylene diisocyanate (TDI), klimethylol propionic acid (DMPA), disperse blue 14 and triethylamine (TEA) depending on a modified acetone process. Fourier transform infrared spectroscopy (FTIR) was used to identify Lhe structure of the polymeric dye, indicating an obvious carbonyl stretching absorption in disperse blue 14. The polymer was also characterized by the analysis of DSC, TGA, WAXD and UV-Vis spectroscopy.

Surface Modification of Polycarbonate Urethane by Covalent Linkage of Heparin with a PEG Spacer

Heparin was grafted onto polycarbonate urethane (PCU) surface via a three-step procedure utilizing α, ωdiamino-poly(ethylene glycol) (APEG, M n =2 000) as a spacer. In the first step, isocyanate functional groups were introduced onto PCU surface by the treatment of hexamethylene diisocyanate (HDI) in the presence of di-n-butyltin dilaurate (DBTDL) as a catalyst. In the second step, APEG was linked to the PCU surface to obtain the APEG conjugated PCU surface (PCU-APEG). In the third step, heparin was covalently coupled with PCU-APEG in the presence of N-hydroxysuccinimide (NHS) and 1-ethyl-3-(3-dimethylamidopropyl) carbodiimide (EDAC). The amount of heparin (1.639 μg/cm 2 ) covalently immobilized on the PCU-APEG surface was determined by the toluidine blue method. The modified surface was characterized by water contact angle, attenuated total reflection Fourier transform infrared spectroscopy (ATR-FTIR), X-ray photoelectron spectroscopy (XPS), and atomic force microscopy (AFM). The hemocompatibility was preliminarily studied by platelet adhesion test. The results indicated that heparin was successfully grafted onto the PCU surface, and meanwhile the hydrophilicity and hemocompatibility of the modified PCU surface were improved significantly compared with the blank PCU surface.

PREPARATION AND MECHANICAL PROPERTIES OF POLY(METHYL METHACRYLATE)/ URETHANE ACRYLATE COPOLYMERS

The urethane acrylate(UA) was made of poly(tetramethylenc oxide), 4,4’-diphenylmethane diisocyanate, and 2-hydroxyethyl methacrylate. A series of poly(methyl methacrylate) / urethane acrylate copolymers was prepared by using a redox initiating system. The copolymers had cross linked structures and two-phase morphologies as indicated by the results of the dynamic mechanical measurement and swelling test.

Electrode Effects on Polyurethane Soft Actuator

A polymer soft actuator is under investigation using a poly urethane elastomer film that bends by means of an applied voltage, which is based on the electrostriction. Bending experiments were performed under different metal electrodes deposited the both sides of the film. Even if the thickness of the both electrodes?is the same, the metal of the both electrodes?is desirable to be the same to bend more. It is suggested that the balance of the physical properties of the both metal is critical for larger bending.

Response to Applied Voltage to Polyurethane Soft Actuators with Loaded Weights

We are investigating a polymer soft actuator using a poly urethane elastomer film that bends by an applied voltage, which is based on the electrostriction. In this article, the bending magnitude was studied in a weight-loaded condition. It was found that the thinner film can bend the more without any load, but that the film of 200-μm thickness gave the largest bending when weights were loaded. The thickness of some degree is critical for large bending torque.

In Vitro Antimicrobial Activity Study of Some New Arginine-based Biodegradable Poly （Ester Urethane）s and Poly （Ester Urea）s

Bactericidal activity of some arginine based biodegradable polymers-PEURs （poly （ester urethane）s） and PEUs （poly （ester urea）s） with low cytotoxicity was studied in in vitro experiments. Various bacterial strains both Gram-positive and Gram-negative were used to explore the bactericidal activity of the cationic polymers. As the test objects, the following microorganisms were used： Bacillus subtilis, Staphylococcus aureus, Mycobacterium album, Pseudomonas fluorescens, Escherichia coli, Actinomyces griseus and Aspergillus niger. The obtained results showed that the new cationic polymers suppressed the growth of the studied microorganisms and the bactericidal activity of the tested cationic polymers strongly depending on their chemical structure.

Synthesis of Bis(4'-hydroxyphenyl)-toluene-2, 4-diurethane for Main Chain Liquid Crystalline Poly(urethane-ester)s

A new methodology was advanced that mesogenic cores appeared after theformation of urethane groups and during the monomer-to-polymer transition. A newdiphenol monomer, bis(4'-hydroxy-phenyl)-toluene-2 (BHPTU), was obtainedby the reaction of 2,4-tolulene diisocyanate with hydroquinone in dioxane or N,N-dimethyl-acetandde. The reaction process was monitored by FTIR, and the product was investigated bylH NMR and elemental analysis (EA). A liquid crystalline poly(urethane-ester) was obtainedusing the BHPTU monomer.

SYNTHESIS OF POLY ( ETHER-URETHANE) CONTAINING PENDANT AMINO GROUP

This paper is concerned with the synthesis of poly (ether-urethane) with pendant amino groups. The copolyether produced by ring opening copolymerization of tetrahydrofuran and epibromohydrin was treated with sodium azide in dimethylformamide to form azido substituted copolyether. The poly (ether-urethane) made from it was subjected to reduction reaction to convert azido group to amino group. The stress-strain behavior and dynamic-mechanical properties of poly (ether-urethane) containing pendant amino groups were studied.

Fluorinated Hyperbranched Poly(urea-urethane)s Containing Reactive Groups: Synthesis, Characterization and Application on Cotton Fabric

A series of hyperbranched poly(urea-urethane)s (HPUs) containing short fluoroalkyl chain and reactive groups (HPUFs) capable as hydrophobic and oleophobic coating materials were synthesized. The obtained polymers were characterized by FTIR(fouier transform-infrared spectroscopy), 1H NMR(nuclear magnetic resonance), 13C NMR, 19F NMR, GPC(gel permeation chromatography), TGA(thermogravimetric analyzer), and XPS(X-ray photoelectron spectroscopy) analyses. Highly hydrophobic and oleophobic cotton fabrics could be achieved from these fluorinated hyperbranched polymers by solution-immersion coating method. The static contact angles reached to 143°, 114°, and 92° for water, hexadecane, and decane, respectively. The water and oil repellency ratings were 90 and 6, respectively, and still kept 80 and 5, respectively, after 10 soaping cycles at 50℃.

聚乳酸基水性聚氨酯的制备及其在合成革中的应用研究

以聚乳酸二元醇(PLA⁃OH)和六亚甲基二异氰酸酯(HDI)为原料,2,2⁃二羟甲基丁酸(DMBA)为亲水扩链剂合成了亲水扩链剂含量不同的聚乳酸(PLA)基水性聚氨酯(PLA⁃WPU)乳液,制备了PLA⁃WPU胶膜和超细纤维合成革。结果表明,随DMBA含量的增加,PLA⁃WPU乳液粒径减小、固含量增大,PLA⁃WPU超细纤维合成革拉伸强度和最大负荷增大,水接触角减小。当DMBA含量为5.5%时,PLA⁃WPU乳液固含量达到35.4%,粒径为196.37 nm,PLA⁃WPU超细纤维合成革的拉伸强度提高到29.9 MPa,约为超细纤维基布的1.7倍,水接触角降低到73°。

沥青路面水性聚氨酯丙烯酸热反射涂料制备

以异佛尔酮二异氰酸酯(IPDI)、聚丙二醇(PPG)等原料制备水性聚氨酯(WPU),通过丙烯酸单体和交联剂改性WPU制得水性聚氨酯丙烯酸(WPUA)乳液。利用傅里叶变换红外光谱(FTIR)分析WPUA的官能团,利用铅笔硬度和百格划线法对WPUA膜的硬度、附着力进行测定,利用水接触角试验对WPUA膜的疏水性能进行测试;以降温值、黏度值、光泽度作为评价指标,借助正交试验设计确定WPUA热反射涂料的最佳配方;通过室内太阳辐射模拟装置以及室外太阳照射试验对WPUA热反射涂料的降温效果进行测试。结果表明,WPUA膜的附着力和硬度均得到提高,具有较好的疏水性;WPUA热反射涂料的最佳制备配方为固含量30%的WPUA乳液、16%的金红石型钛白粉、2%的石英砂和4%的中空玻璃微珠。WPUA热反射涂料室内外降温效果显著。

Improvement in Toughness of Polylactide by Melt Blending with Bio-based Poly(ester)urethane

Polylactide （PLA） was successfully toughened by blending with bio-based poly（ester）urethane （TPU） elastomers which contained bio-based polyester soft segments synthesized from biomass diols and diacids. The miscibility, mechanical properties, phase morphology and toughening mechanism of the blend were investigated. Both DSC and DMTA results manifested that the addition of TPU elastomer not only accelerated the crystallization rate, but also increased the final degree of crystallinity, which proved that TPU has limited miscibility with PLA and has functioned as a plasticizer. All the blend samples showed distinct phase separation phenomenon with sea-island structure under SEM observation and the rubber particle size in the PLA matrix increased with the increased contents of TPU. The mechanical property variation of PLA/TPU blends could be quantitatively explained by Wu＇s model. With the variation of TPU, a brittle-ductile transition has been observed for the TPU/PLA blends. When these blends were under tensile stress conditions, the TPU particles could be debonded from the PLA matrix and the blends showed a high ability to induce large area plastic deformation before break, which was important for the dissipation of the breaking energy. Such mechanism was demonstrated by tensile tests and scanning electron microcopy （SEM） observations.

Aliphatic Thermoplastic Poly(ether urethane)s Having Long PEG Sequences Synthesized through a Non-isocyanate Route

A non-isocyanate route for synthesizing thermoplastic polyurethanes with excellent thermal and mechanical properties was described. Melt transurethane polycondensation of 1,6-bis（hydroxyethyloxy carbonyl amino）hexane with four poly（ethylene glycol）s （PEGs）, i.e. PEG400, PEG600, PEG1000, or PEG1500, was conducted at different molar ratios. A series of thermoplastic poly（ether urethane）s （TPEUs） with long PEG sequences were prepared. The TPEUs were characterized via gel permeation chromatography, FTIR, 1H-NMR, differential scanning calorimetry, thermogravimetric analysis, wide-angle X-ray scattering, and tensile tests. The TPEUs exhibit Tg between 12.4 ℃ and -40.4 ℃, Tm of up to 149.8 ℃, and initial decomposition temperature over 239.4 ℃. The tensile strength of the TPEUs reaches 38.39 MPa with a strain at break of 852.92%.

Synthesis and Characterization of Crystallizable Aliphatic Thermoplastic Poly(ester urethane) Elastomers through a Non-isocyanate Route

A simple non-isocyanate route is developed for synthesizing crystallizable aliphatic thermoplastic poly（ester urethane） elastomers （TPEURs） with good thermal and mechanical properties. Three prepolymers of 1,6-bis（hydroxyethyloxycarbonylamino） hexane （BHCH）, i.e. PrePBHCHs, were prepared through the self-transurethane polycondensation of BHCH. A poly（butylene adipate） prepolymer （PrePBA） with terminal HO-- groups was prepared and used as a polyester glycol. A series of TPEURs were prepared by the co-polycondensation of the PrePBHCHs with PrePBA at 170 ℃under a reduced pressure of 399 Pa. The TPEURs were characterized by gel permeation chromatography, FTIR, 1H-NMR, differential scanning calorimetry, thermogravimetric analysis, wide-angle X-ray diffraction, atomic force microscopy, and tensile test. The TPEURs exhibited Mn up to 23300 g/mol, Mw up to 51100 g/mol, Tg ranging from -33.8 ℃ to -3.1 ℃, Tm from 94.3 ℃ to 111.9 ℃, initial decomposition temperature over 274.7℃, tensile strength up to18.8 MPa with a strain at break of 450.0%, and resilience up to 77.5%. TPU elastomers with good crystallization and mechanical properties were obtained through a non-isocyanate route.

Electrospun Poly(p-dioxanone)/Poly(ester-urethane)ureas Composite Nanofibers for Potential Heart Valve Tissue Reconstruction

Electrospun nanofibrous mats represent a new generation of medical textiles with promising applications in heart valve tissue reconstruction. It is important for biomaterials to mimic the biological and mechanical microenvironment of native extracellular matrix(ECM). However, the major challenges are still remaining for current biomedical materials, including appropriate mechanical properties,biocompatibility, and hemocompatibility. In the present work, the novel composite nanofibrous mats of poly(p-dioxanone)(PDO) and poly(ester-urethane)ureas(PEUU) are fabricated by electrospinning system. The optimal combination ratio of PDO to PEUU may balance the mechanical properties and cellular compatibility to match the newly formed tissue. In PDO/PEUU composite nanofibrous mats, PEUU can provide the biomimetic elastomeric behavior, and PDO could endow the excellent biocompatibility. In comparison to nanofibrous mat of neat PDO, the composite showed significantly improved mechanical properties, with 5-fold higher initial elongation at break.Furthermore, human umbilical vein endothelial cells(HUVECs) were cultured on the composite to evaluate its ability to rapidly endothelialize as heart valve tissue engineering. The results revealed that PDO/PEUU composite nanofibrous mats could promote cell adhesion and proliferation, especially for the ratio of 60/40. Overall, PDO/PEUU composite nanofibrous mats(60/40) show the excellent mechanical properties, appropriate biocompatibility and hemocompatibility which meet the necessary norm for tissue engineering and may be suitable for potential heart valve tissue reconstruction.

SELF-HEALING BIODEGRADABLE POLY(UREA-URETHANE) ELASTOMERS BASED ON HYDROGEN BONDING INTERACTIONS

Self-healing poly（urea-urethane）s （PUUs） showing a tolerance to mechanical damage are particularly desirable for high-performance elastomeric biomaterials. In this study a kind of biodegradable PUUs was synthesized from poly（e-caprolactone） diol with L-lysine ethyl ester diisocyanate （LDI） extended with L-lysine ethyl ester dihydrochloride （LEED） in DMF and characterized by using 1H-NMR, FTIR, DSC, XRD, SEM and tensile tests. Interestingly, they exhibited a self-healing characteristic upon exposure to 37℃ for as short as 30 min with the tensile strength keeping at 4.23 MPa and the elongation at break reaching to 627%. It is revealed that increasing the hard segment content in PUUs benefits the self-healing performance, and on the opposite increasing the soft segment content contributes to the biodegradability.