Numerical Analysis of EM Wave Propagation in Free Space and Chiral Media

In this paper, an implicit finite difference scheme of Box method is presented for analyzing the electromagnetic (EM) wave propagation in the case of axial symmetry. Typical numerical examples, which are about EM wave propagation in free space and chiral media, are presented. Such method has the advantage of high accuracy and easy boundary handling.

Time-domain Wave Propagation in Dispersive Media

The equation of time-domain wave propagation in dispersive media and the explicit beam propagation method are presented in this paper.This method is demonstrated by the short optical pulses in a directional coupler with second order dispersive effect and shows to be in full agreement with former references.This method is simple,easy and practical.

Elastic wave insulation and propagation control based on the programmable curved-beam periodic structure

Curved-beams can be used to design modular multistable metamaterials(MMMs)with reprogrammable material properties,i.e.,programmable curved-beam periodic structure(PCBPS),which is promising for controlling the elastic wave propagation.The PCBPS is theoretically equivalent to a spring-oscillator system to investigate the mechanism of bandgap,analyze the wave propagation mechanisms,and further form its geometrical and physical criteria for tuning the elastic wave propagation.With the equivalent model,we calculate the analytical solutions of the dispersion relations to demonstrate its adjustability,and investigate the wave propagation characteristics through the PCBPS.To validate the equivalent system,the finite element method(FEM)is employed.It is revealed that the bandgaps of the PCBPS can be turned on-and-off and shifted by varying its physical and geometrical characteristics.The findings are highly promising for advancing the practical application of periodic structures in wave insulation and propagation control.

Wave propagation of a functionally graded plate via integral variables with a hyperbolic arcsine function

Several studies on functionally graded materials(FGMs)have been done by researchers,but few studies have dealt with the impact of the modification of the properties of materials with regard to the functional propagation of the waves in plates.This work aims to explore the effects of changing compositional characteristics and the volume fraction of the constituent of plate materials regarding the wave propagation response of thick plates of FGM.This model is based on a higher-order theory and a new displacement field with four unknowns that introduce indeterminate integral variables with a hyperbolic arcsine function.The FGM plate is assumed to consist of a mixture of metal and ceramic,and its properties change depending on the power functions of the thickness of the plate,such as linear,quadratic,cubic,and inverse quadratic.By utilizing Hamilton’s principle,general formulae of the wave propagation were obtained to establish wave modes and phase velocity curves of the wave propagation in a functionally graded plate,including the effects of changing compositional characteristics of materials.

Non-dimensional analysis on blast wave propagation in foam concrete:Minimum thickness to avoid stress enhancement

Foam concrete is a prospective material in defense engineering to protect structures due to its high energy absorption capability resulted from the long plateau stage.However,stress enhancement rather than stress mitigation may happen when foam concrete is used as sacrificial claddings placed in the path of an incoming blast load.To investigate this interesting phenomenon,a one-dimensional difference model for blast wave propagation in foam concrete is firstly proposed and numerically solved by improving the second-order Godunov method.The difference model and numerical algorithm are validated against experimental results including both the stress mitigation and the stress enhancement.The difference model is then used to numerically analyze the blast wave propagation and deformation of material in which the effects of blast loads,stress-strain relation and length of foam concrete are considered.In particular,the concept of minimum thickness of foam concrete to avoid stress enhancement is proposed.Finally,non-dimensional analysis on the minimum thickness is conducted and an empirical formula is proposed by curve-fitting the numerical data,which can provide a reference for the application of foam concrete in defense engineering.

Study on the Propagation and Focusing Mechanism of Long Waves over A Submerged Atoll

An analytical solution for long waves propagating over a submerged atoll is established. The atolls involved in this study are annular coral reefs with large lagoons in the middle, and the expression of the cross section is a trinomial function of the radial distance, i.e., h=ar(2s)-br~s+h_0, where s is the positive rational number. This analytical solution extends the theory by Wang et al.(2018) as s is no longer limited to s=2/m, where m is the positive integer. In addition, by adjusting the terrain parameters properly, the analytic solution can be degenerated to describe the wave propagation over topography with a hump or pit. According to the relationship between wave rays and wave energy, the distribution characteristics and formation mechanism of energy over the topography are expounded. When the lagoon is non-existent, all wave rays converge at the x-axis, which results in an abrupt amplification of the wave amplitude around the convergence point. When a lagoon is mounted on the top of the atoll, the rays are scattered due to the refraction of the lagoon, and only some rays converge at the symmetrical axis and the ridges on both sides,which results in the amplification of wave amplitudes in these areas.

Effect of porous surface layer on wave propagation in elastic cylinder immersed in fluid

To study the damage to an elastic cylinder immersed in fluid, a model of an elastic cylinder wrapped with a porous medium immersed in fluid is designed. This structure can both identify the properties of guided waves in a more practical model and address the relationship between the cylinder damage degree and the surface and surrounding medium. The principal motivation is to perform a detailed quantitative analysis of the longitudinal mode and flexural mode in an elastic cylinder wrapped with a porous medium immersed in fluid. The frequency equations for the propagation of waves are derived each for a pervious surface and an impervious surface by employing Biot theory. The influences of the various parameters of the porous medium wrapping layer on the phase velocity and attenuation are discussed. The results show that the influences of porosity on the dispersion curves of guided waves are much more significant than those of thickness,whereas the phase velocity is independent of the static permeability. There is an apparent “mode switching” between the two low-order modes. The characteristics of attenuation are in good agreement with the results from the dispersion curves.This work can support future studies for optimizing the theory on detecting the damage to cylinder or pipeline.

Wave propagation responses of porous bi-directional functionally graded magneto-electro-elastic nanoshells via nonlocal strain gradient theory

This study examines the wave propagation characteristics for a bi-directional functional grading of barium titanate(BaTiO_(3)) and cobalt ferrite(CoFe_(2)O_(4)) porous nanoshells,the porosity distribution of which is simulated by the honeycomb-shaped symmetrical and asymmetrical distribution functions.The nonlocal strain gradient theory(NSGT) and first-order shear deformation theory are used to determine the size effect and shear deformation,respectively.Nonlocal governing equations are derived for the nanoshells by Hamilton's principle.The resulting dimensionless differential equations are solved by means of an analytical solution of the combined exponential function after dimensionless treatment.Finally,extensive parametric surveys are conducted to investigate the influence of diverse parameters,such as dimensionless scale parameters,radiusto-thickness ratios,bi-directional functionally graded(FG) indices,porosity coefficients,and dimensionless electromagnetic potentials on the wave propagation characteristics.Based on the analysis results,the effect of the dimensionless scale parameters on the dispersion relationship is found to be related to the ratio of the scale parameters.The wave propagation characteristics of nanoshells in the presence of a magnetoelectric field depend on the bi-directional FG indices.

Intrinsic Wave Velocity Propagation:A Novel Parameter for Assessing the Effect of Anthracycline Chemotherapy Agents on Cardiac Diastolic Function in Breast Cancer Patients

Objective Anthracycline chemotherapeutic agents have significant cardiotoxicity.The present study emphasized the effect of anthracycline chemotherapy drugs on left ventricular(LV)myocardial stiffness in breast cancer patients by measuring the intrinsic wave velocity propagation(IVP),and evaluating the potential clinical value of IVP in detecting early LV diastolic function impairment.Methods A total of 68 newly diagnosed breast cancer patients,who were treated with anthracycline-based chemotherapy,were analyzed.Transthoracic echocardiography was performed at baseline(T0),and after 1,2,3,4 and 8 chemotherapeutic cycles(T1,T2,T3,T4 and T5,respectively).Then,the IVP,LV strain parameters[global longitudinal strain(GLS),longitudinal peak strain rate at systole(LSRs),longitudinal peak strain rate at early diastole(LSRe),longitudinal peak strain rate at late diastole(LSRa),and the E/LSRe ratio],and conventional echocardiographic parameters were obtained and further analyzed.A relative reduction of>15%in GLS was considered a marker of early LV subclinical dysfunction.Results Compared to the T0 stage,IVP significantly increased at the T1 stage.However,there were no significant changes in GLS,LSRs,or LSRe between the T0 and T1 stages.These parameters significantly decreased from the T2 stage.LSRa started to significantly decrease at the T5 stage,and the E/LSRe ratio started to significantly increase at the T3 stage(all P<0.05).At the T0 stage,IVP(AUC=0.752,P<0.001)had a good predictive value for LV subclinical dysfunction after chemotherapy.Conclusions IVP is a potentially sensitive parameter for the early clinical assessment of anthracycline-related cardiac diastolic impairment.

Blast waveform tailoring using controlled venting in blast simulators and shock tubes

A critical challenge of any blast simulation facility is in producing the widest possible pressure-impulse range for matching against equivalent high-explosive events.Shock tubes and blast simulators are often constrained with the lack of effective ways to control blast wave profiles and as a result have a limited performance range.Some wave shaping techniques employed in some facilities are reviewed but often necessitate extensive geometric modifications,inadvertently cause flow anomalies,and/or are only applicable under very specific configurations.This paper investigates controlled venting as an expedient way for waveforms to be tuned without requiring extensive modifications to the driver or existing geometry and could be widely applied by existing and future blast simulation and shock tube facilities.The use of controlled venting is demonstrated experimentally using the Advanced Blast Simulator(shock tube)at the Australian National Facility of Physical Blast Simulation and via numerical flow simulations with Computational Fluid Dynamics.Controlled venting is determined as an effective method for mitigating the impact of re-reflected waves within the blast simulator.This control method also allows for the adjustment of parameters such as tuning the peak overpressure,the positive phase duration,and modifying the magnitude of the negative phase and the secondary shock of the blast waves.This paper is concluded with an illustration of the potential expanded performance range of the Australian blast simulation facility when controlled venting for blast waveform tailoring as presented in this paper is applied.

Ultra-wide band gap and wave attenuation mechanism of a novel star-shaped chiral metamaterial

A novel hollow star-shaped chiral metamaterial(SCM)is proposed by incorporating chiral structural properties into the standard hollow star-shaped metamaterial,exhibiting a wide band gap over 1500 Hz.To broaden the band gap,solid single-phase and two-phase SCMs are designed and simulated,which produce two ultra-wide band gaps(approximately 5116 Hz and 6027 Hz,respectively).The main reason for the formation of the ultra-wide band gap is that the rotational vibration of the concave star of two novel SCMs drains the energy of an elastic wave.The impacts of the concave angle of a single-phase SCM and the resonator radius of a two-phase SCM on the band gaps are studied.Decreasing the concave angle leads to an increase in the width of the widest band gap,and the width of the widest band gap increases as the resonator radius of the two-phase SCM increases.Additionally,the study on elastic wave propagation characteristics involves analyzing frequency dispersion surfaces,wave propagation directions,group velocities,and phase velocities.Ultimately,the analysis focuses on the transmission properties of finite periodic structures.The solid single-phase SCM achieves a maximum vibration attenuation over 800,while the width of the band gap is smaller than that of the two-phase SCM.Both metamaterials exhibit high vibration attenuation capabilities,which can be used in wideband vibration reduction to satisfy the requirement of ultra-wide frequencies.

Mesh Size Effect in Numerical Simulation of Blast Wave Propagation and Interaction with Structures

Numerical method is popular in analysing the blast wave propagation and interaction with structures.However,because of the extremely short duration of blast wave and energy trans-mission between different grids,the numerical results are sensitive to the finite element mesh size.Previous numerical simulations show that a mesh size acceptable to one blast scenario might not be proper for another case,even though the difference between the two scenarios is very small,indicating a simple numerical mesh size convergence test might not be enough to guarantee accu-rate numerical results.Therefore,both coarse mesh and fine mesh were used in different blast scenarios to investigate the mesh size effect on numerical results of blast wave propagation and interaction with structures.Based on the numerical results and their comparison with field test re-sults and the design charts in TM5-1300,a numerical modification method was proposed to correct the influence of the mesh size on the simulated results.It can be easily used to improve the accu-racy of the numerical results of blast wave propagation and blast loads on structures.

Study of the propagation direction of the internal waves in the South China Sea using satellite images

Internal wave propagation carries considerable vertical shear which can lead to turbulence and mixing. Based on the analysis of more than 2 500 synthetic aperture radar （SAR） and optical satellite images, the in- ternal wave propagation in the whole South China Sea was investigated systematically. The results show that （1） in the northeastern South China Sea, most internal waves propagate westward from the Luzon Strait and are diffracted by coral reefs near the Dongsha Islands. Some impinge onto the shelf and a few are reflected; （2） in the northwestern South China Sea, most internal waves are generated at the shelf and propagate northwestward or westward to the coast; （3） in the western South China Sea, most internal waves propagate westward to the Vietnamese coast, except a few propagate southward to the deep sea; and （4） in the southern South China Sea, most internal waves propagate southwestward to the coast. Some prop- agate southeastward to the coast of Kalimantan Island, and a few propagate southeastward because of the influence of the Mekon~ River.

Dynamic mechanical properties and wave propagation of composite rock-mortar specimens based on SHPB tests

Filled inclusions in rock discontinuities play a key role in the mechanical characteristics of the rock and thereby influence the stability of rock engineering. In this study, a series of impact tests were performed using a split Hopkinson pressure bar system with high-speed photography to investigate the effect of interlayer strength on the wave propagation and fracturing process in composite rock-mortar specimens.The results indicate that the transmission coefficient, nominal dynamic strength, interlayer closure, and specific normal stiffness generally increase linearly with increasing interlayer stiffness. The cement mortar layer can serve as a buffer during the deformation of composite specimens. The digital images show that tensile cracks are typically initiated at the rock-mortar interface, propagate along the loading direction, and eventually result in a tensile failure regardless of the interlayer properties. However, when a relatively weaker layer is sandwiched between the rock matrix, an increasing amount of cement mortar is violently ejected and slight slabbing occurs near the rock-mortar interface.

Experimental verification of effect of horizontal inhomogeneity of evaporation duct on electromagnetic wave propagation

The evaporation duct which forms above the ocean surface has a significant influence on electromagnetic wave propagation above 2 GHz over the ocean. The effects of horizontal inhomogeneity of evaporation duct on electromagnetic wave propagation are investigated, both in numerical simulation and experimental observation methods, in this paper. Firstly, the features of the horizontal inhomogeneity of the evaporation duct are discussed. Then, two typical inhomogeneous cases are simulated and compared with the homogeneous case. The result shows that path loss is significantly higher than that in the homogeneous case when the evaporation duct height （EDH） at the receiver is lower than that at the transmitter. It is also concluded that the horizontal inhomogeneity of the evaporation duct has a significant influence when the EDH is low or when the electromagnetic wave frequency is lower than 13 GHz. Finally, experimental data collected on a 149-km long propagation path in the South China Sea in 2013 are used to verify the conclusion. The experimental results are consis- tent with the simulation results. The horizontal inhomogeneity of evaporation duct should be considered when modeling electromagnetic wave propagation over the ocean.

Wave propagation control in periodic track structure through local resonance mechanism

Excessive vibration and noise radiation of the track structure can be caused by the operation of high speed trains.Though the track structure is characterized by obvious periodic properties and band gaps,the bandwidth is narrow and the elastic wave attenuation capability within the band gap is weak.In order to effectively control the vibration and noise of track structure,the local resonance mechanism is introduced to broaden the band gap and realize wave propagation control.The locally resonant units are attached periodically on the rail,forming a new locally resonant phononic crystal structure.Then the tuning of the elastic wave band gaps of track structure is discussed,and the formation mechanism of the band gap is explicated.The research results show that a new wide and adjustable locally resonant band gap is formed after the resonant units are introduced.The phenomenon of coupling and transition can be observed between the new locally resonant band gap and the original band gap of the periodic track structure with the band gap width reaching the maximum at the coupling position.The broader band gap can be applied for vibration and noise reduction in high speed railway track structure.

The Propagation and Transport Effect of Planetary Waves in the Northern Hemisphere Winter

Based on the transformed Eulerian-mean equations, the dynamics of planetary waves are discussed. Both observations and simulations indicate that in the Northern Hemisphere winter there are two waveguides for the meridional propagation of quasi-stationary planetary waves. One is the high latitude waveguide, and the other is the low latitude waveguide. These results are in good agreement with theoretical analysis. Moreover, the convergence of EP flux indicates that the stratospheric sudden warming is the result of anomalous planetary wave propagation along the high latitude waveguide and its interaction with mean flows. The tropical quasi-biennial oscillation (QBO) winds, which represent one significant variation of zonal flow in the lower stratosphere at low latitudes, can influence the low latitude waveguide of planetary wave propagation. Our results of the wave-mean flow coupled model show that these tropical winds can also modulate the high latitude waveguide significantly in the case of wave-mean flow interaction.The transport effect of planetary waves on ozone is also analyzed. The residual mean circulation forced by planetary waves indicates that there is strong transport circulation for the dissipative planetary waves. Under the forcing of northward eddy heat transport, a positive transport circulation can result which rises at low latitudes and sinks at high latitudes. At the same time, the modification of planetary wave propagation by the equatorial QBO winds is shown to have an important impact on the transport circulation. The model results indicate that the meridional transport is amplified during the easterly phase of the QBO. This mechanism may explain the interannual variability of ozone in the stratosphere at high latitudes.

Effects of axial static stress on stress wave propagation in rock considering porosity compaction and damage evolution

A wave equation of rock under axial static stress is established using the equivalent medium method by modifying the Kelvin-Voigt model.The analytical formulas of longitudinal velocity,space and time attenuation coefficients and response frequency are obtained by solving the equation using the harmonic method.A series of experiments on stress wave propagation through rock under different axial static stresses have been conducted.The proposed models of stress wave propagation are then verified by comparing experimental results with theoretical solutions.Based on the verified theoretical models,the influences of axial static stress on longitudinal velocity,space and time attenuation coefficients and response frequency are investigated by detailed parametric studies.The results show that the proposed theoretical models can be used to effectively investigate the effects of axial static stress on the stress wave propagation in rock.The axial static stress influences stress wave propagation characteristics of porous rock by varying the level of rock porosity and damage.Moreover,the initial porosity,initial elastic modulus of the rock voids and skeleton,viscous coefficient and vibration frequency have significant effects on the P-wave velocity,attenuation characteristics and response frequency of the stress wave in porous rock under axial static stress.

An extended displacement discontinuity method for analysis of stress wave propagation in viscoelastic rock mass

An extended displacement discontinuity method (EDDM) is proposed to analyze the stress wave propagation in jointed viscoelastic rock mass (VRM).The discontinuities in a rock mass are divided into two groups.The primary group with an average geometrical size larger than or in the same order of magnitude of wavelength of a concerned stress wave is defined as 'macro-joints',while the secondary group with a high density and relatively small geometrical size compared to the wavelength is known as 'micro-defects'.The rock mass with micro-defects is modeled as an equivalent viscoelastic medium while the macro-joints in the rock mass are modeled explicitly as physical discontinuities.Viscoelastic properties of a micro-defected sedimentary rock are obtained by longitudinally impacting a cored long sedimentary rod with a pendulum.Wave propagation coefficient and dynamic viscoelastic modulus are measured.The EDDM is then successfully employed to analyze the wave propagation across macro-joint in VRM.The effect of the rock viscosity on the stress wave propagation is evaluated by comparing the results of VRM from the presented EDDM with those of an elastic rock mass (ERM) from the conventional displacement discontinuity method (CDDM).The CDDM is a special case of the EDDM under the condition that the rock viscosity is ignored.Comparison of the reflected and transmitted waves shows that the essential rock viscosity has a significant effect on stress wave attenuation.When a short propagation distance of a stress wave is considered,the results obtained from the CDDM approximate to the EDDM solutions,however,when the propagation distance is sufficiently long relative to the wavelength,the effect of rock viscosity on the stress wave propagation cannot be ignored.

Surface effect and non-local elasticity in wave propagation of functionally graded piezoelectric nano-rod excited to applied voltage

A non-local solution for a functionally graded piezoelectric nano-rod is pre- sented by accounting the surface effect. This solution is used to evaluate the charac- teristics of the wave propagation in the rod structure. The model is loaded under a two-dimensional （2D） electric potential and an initially applied voltage at the top of the rod. The mechanical and electrical properties are assumed to be variable along the thick- ness direction of the rod according to the power law. The Hamilton principle is used to derive the governing differential equations of the electromechanical system. The effects of some important parameters such as the applied voltage and gradation of the material properties on the wave characteristics of the rod are studied.