Comparative research on three types of coaxial slow wave structures

This paper studies three types of coaxial slow wave structures （SWSs）： （1） with ripples on both the inner and outer conductors; （2） with ripples on the outer conductor and smooth on the inner one; and （3） with ripples on the inner conductor and smooth on the outer one. The frequencies, coupling impedances, time growth rates and beam-wave interaction efficiencies of the three types of coaxial SWSs are obtained by theoretical analysis. Moreover, the relativistic Ccrenkov generators （RCGs） with the three types of coaxial SWSs are simulated with a fully electromagnetic particle- in-cell code, and the results verify the theoretical analysis. It is proved that the RCG with double-rippled coaxial SWS has the highest conversion efficiency and the shortest starting time.

A Comparative Study of Dispersion Characteristics Determination of a Trapezoidally Corrugated Slow Wave Structure Using Different Techniques

The linear dispersion relation of a trapezoidally corrugated slow wave structure （TCSWS） is analyzed and presented. The size parameters of the TCSWS are chosen in such a way that they operate in the x-band frequency range. The dispersion relation is solved by utilizing the Rayleigh-Fourier method by expressing the radial function in terms of the Fourier series. A highly accurate synthetic technique is also applied to determine the complete dispersion characteristics from experimentally measured resonances （cold test）. Periodic structures resonate at specific frequencies when the terminals are shorted numerical calculation, synthetic technique and cold appropriately. The dispersion characteristics obtained from test are compared, and an excellent agreement is achieved.

A novel multi-pin rectangular waveguide slow-wave structure based backward wave amplifier at 340 GHz

A backward wave amplifier（BWA） in a terahertz regime with a novel slow-wave structure（SWS） composed of multi parallel grating pins inside a rectangular waveguide is analyzed. The multi-pin rectangular waveguide SWS possesses good performance and is compatible with micro-fabrication technologies. The dispersion and interaction impedance of the multipin SWS are presented. The stopbands of the modes cling together in a Brillouim zone. The SWS has a high interaction impedance that is suitable for the interaction of multi cylindrical beams. The design, which is based on three parallel pins supporting the wave–beam interaction with four cylindrical beams, is verified by three-dimensional particle-in-cell simulations. A BWA with the central frequency at 340 GHz is demonstrated, and the output power is more than 100 mW.A tuning frequency range of 15 GHz（333–348 GHz） is obtained with a gain of more than 20 dB.

High efficiency X-band relativistic backward wave oscillator with non-uniform slow wave structures

Backward wave oscillators （BWOs） driven by intense relativistic electron beams are very efficient means of producing high-power microwaves. However, the efficiency of conventional BWO is lower than 30%. An X-band oversized BWO with non-uniform slow wave structure is designed to improve RF output characteristics. In particle-in-cell simulation, a high power microwave with a power of 8.0 GW and efficiency of 40% is obtained, compared with that of 30% obtained in a conventional relativistic BWO.

Variable separation solutions and new solitary wave structures to the （l＋l）-dimensional Ito system

A variable separation approach is proposed and extended to the （1＋1）-dimensional physics system. The variable separation solution of （1-F1）-dimensional Ito system is obtained. Some special types of solutions such as non-propagating solitary wave solution, propagating solitary wave solution and looped soliton solution are found by selecting the arbitrary function appropriately.

A Special MJO Event with a Double Kelvin Wave Structure

The second Madden–Julian Oscillation（MJO）event during the field campaign of the Dynamics of the MJO/Cooperative Indian Ocean Experiment on Intraseasonal Variability in the Year 2011（DYNAMO/CINDY2011）exhibi ted an unusual double rainband structure.Using a wavenumber-frequency spectral filtering method,we unveil that this double rainband structure arises primarily from the Kelvin wave component.The zonal phase speed of the double rainbands is about 7.9 degree per day in the equatorial Indian Ocean,being in the range of convectively coupled Kelvin wave phase speeds.The convection and circulation anomalies associated with the Kelvin wave component are characterized by two anomalous convective cells,with low-level westerly（easterly）and high（low）pressure anomalies to the west（east）of the convective centers,and opposite wind and pressure anomalies in the upper troposphere.Such a zonal wind–pressure phase relationship is consistent with the equatorial free-wave dynamics.While the freeatmospheric circulation was dominated by the first baroclinic mode vertical structure,moisture and vertical motion in the boundary layer led the convection.The convection and circulation structures derived based on the conventional MJO filter show a different characteristic.For example,the phase speed is slower（about 5.9 degree per day）,and there were no double convective branches.This suggests that MJO generally involves multi-scales and it is incomplete to extract its signals by using the conventional filtering technique.

Study on Wave Dissipation of the Structure Combined by Baffle and Submerged Breakwater

This paper proposes a structure combined by baffle and submerged breakwater （abbreviated to SCBSB in the following texts）. Such a combined structure is conducive to the water exchange in the harbor, and has strong capability on wave dissipation. Our paper focuses on the discussion of two typical structures, i.e., the submerged baffle and rectangular breakwater combined with the upper baffle respectively, which are named as SCBSB 1 and SCBSB2 for short. The eigenfunction method corrected by experimental results is used to investigate the wave dissipation characteristics. It shows that the calculated results agree well with the experimental data and the minimum value of the wave transmission coefficient can be obtained when the distance between the front and rear structures is from 1/4 to 1/2 of the incident wave length.

Hydraulic Design Method of Wave Dissipating Structure with Partially Perforated Front Wall

Based on the matching conditions of different fluid regions, the eigenfunction expansion method is used to develop a theoretical formula for wave reflection in front of the perforated structure with a partially slit front wall. The accuracy of the solution is verified by comparing the numerical results with experimental data. In addition, a new hydraulic design method is developed by derivation of the theoretical formula with respect to the porosity of the slit wall, and the results of this design method is drafted for harbour engineers to use.

SPH Numerical Modeling for the Wave–Thin Structure Interaction

In this paper, a numerical model of 2D weakly compressible smoothed particle hydrodynamics(WCSPH) is developed to simulate the interaction between waves and thin structures. A new color domain particle(CDP)technique is proposed to overcome difficulties of applying the ghost particle method to thin structures in dealing with solid boundaries. The new technique can deal with zero-thickness structures. To apply this enforcing technique, the computational fluid domain is divided into sub domains, i.e., boundary domains and internal domains. A color value is assigned to each particle, and contains the information of the domains in which the particle belongs to and the particles can interact with. A particle, nearby a thin boundary, is prevented from interacting with particles, which should not interact with on the other side of the structure. It is possible to model thin structures, or the structures with the thickness negligible with this technique. The proposed WCSPH module is validated for a still water tank, divided by a thin plate at the middle section, with different water levels in the subdomains, and is applied to simulate the interaction between regular waves and a perforated vertical plate. Finally, the computation is carried out for waves and submerged twin-horizontal plate interaction. It is shown that the numerical results agree well with experimental data in terms of the pressure distribution, pressure time series and wave transmission.

Analysis of Wave Height in Front of a Wave Absorbing Structure with Rubble Foundation

Wave absorbing structures have been widely applied in many countries. In the present paper, the wave heights in front of a vertical wave absorbing structure with rubble foundation as well as in the wave chamber of the structure are analysed using an approximative calculation method, and the dissipating effect of the structure is verified. On the basis of the results of regular waves, the relative wave heights of irregular waves in front of the wave absorbing structure as well as in the chamber have also been analysed.

S-wave velocity structure inferred from receiver function inversion in Tengchong volcanic area

Tengchong volcanic area is located near the impinging and underthrust margin of India and Eurasia plates. The volcanic activity is closely related to the tectonic environment. The deep structure characteristics are inferred from the receiver function inversion with the teleseismic records in the paper. The results show that the low velocity zone is influenced by the NE-trending Dayingjiang fault. The S-wave low velocity structure occurs obviously in the southern part of the fault, but unobviously in its northern part. There are low velocity zones in the shallow po-sition, which coincides with the seismicity. It also demonstrates that the low velocity zone is directly related to the thermal activity in the volcanic area. Therefore, we consider that the volcano may be alive again.

The Structure and Propagation of Stationary Planetary Wave Packet in the Barotropic Atmosphere

Monthly or seasonally mean anomalies of large-scale atmospheric circulation are better represented by wave packets or their combination. Both qualitative and quantitative analyses of equations of wave packet dynamics, which are obtained by the use of WKB approximation, are very helpful for the understanding of structure, formation and propagation of stationary and quasi-stationary planetary wave packet patterns in the atmosphere. Indeed, these equations of wave packet dynamics can be directly solved by the method of characteristic lines, and the results can be simply and clearly interpreted by physical laws. In this paper, a quasi-geostrophic barotropic model is taken for simplicity, and the wave packets superimposed on several ideal profiles of the basic current and excited by some ideal forcings are investigated in order to make comparison of the accuracy of calculation with the analytical solution. It is revealed that (a) the rays of stationary planetary wave packet do not coincide with but go away from the great circle with significant difference if the shear of the basic zonal flow is not too small; (b) being superimposed on a westerly jet flow with positive shear (Uλ/y>0), the stationary wave packets excited by low-latitudinal forcing are first intensified during their northeastward propagation in the Northern Hemisphere, then reach their maximum of amplitude at some critical latitude, and after that weaken again; (c) the connected line of extremes (the positive and negative centres) of wave packet does not coincide with but crosses the ray by an angle, the larger the scale of external forcing, the larger the angle; and (d) the whole pattern of a trapped stationary wave packet is complicated by the interference between the incident and reflected waves.

Manipulating Backward Propagation of Acoustic Waves by a Periodical Structure

In the backward propagation of acoustic waves, the direction of phase velocity is anti-parallel to that of group velocity. We propose a scheme to manipulate the backward propagation using a periodicM structure. The dynamic backward propagation process is further experimentally observed. It is demonstrated that the oblique incident plane wave moves backward when it travels through the periodical structure and the backward shift can be controlled within a certain range.

Upper mantle P wave velocity structure of the northern part of China and Mongolia

The average upper mantle P wave velocity structure and lateral heterogeneity in the northern part of China and Mongolia are investigated by waveform inversion of broadband body waveform data recorded by CDSN and digital stations around China. The average model has a low P wave velocity lid (about 7.8～8.0 km·s -1 ) with thickness about 60 km, and two discontinuities with velocity jumps of 0.29 km·s -1 and 0.55 km·s -1 at depth of 410 km and 665 km respectively. In the Jungger basin, the P wave velocity of uppermost mantle is about 7.7 km·s -1 . The lid thickness (90～100 km) and velocity gradient (average gradient is greater than 0.005 5/s) are large. At the depth of 140 km the P wave velocity reaches to 8.2 km·s -1 . Near in Baikal, the lid is about 30 km thick with average P wave velocity of 8.00～8.05 km·s -1 .

Propagation of liquid surface waves over finite graphene structured arrays of cylinders

Based on the multiple scattering method,this paper investigates a benchmark problem of the propagation of liquid surface waves over finite graphene (or honeycomb) structured arrays of cylinders.Comparing the graphene structured array with the square structured and with triangle structured arrays,it finds that the finite graphene structure can produce more complete band gaps than the other finite structures,and the finite graphene structure has less localized ability than the other finite structures.

SIMILARITY TRANSFORMATION, THE STRUCTURE OF THE TRAVELING WAVES SOLUTION AND THE EXISTENCE OF A GLOBAL SMOOTH SOLUTION TO GENERALIZED KURAMOTO SIVASHINSKY TYPE EQUATIONS

The existence of a global smooth solution for the initial value problem of generalized Kuramoto-Sivashinsky type equations have been obtained. Similarty siolutions and the structure of the traveling waves solution for the generalized KS equations are discussed and analysed by using the qualitative theory of ODE and Lie's infinitesimal transformation respectively.

Formation of Nonlinear Solitary Vortical Structures by Coupled Electrostatic Drift and Ion-Acoustic Waves

Propagation of coupled electrostatic drift and ion-acoustic waves（DIAWs） is presented. It is shown that nonlinear solitary vortical structures can be formed by low-frequency coupled electrostatic DIAWs. Primary waves of distinct（small, intermediate and large） scales are considered. Appropriate set of 3 D equations consisting of the generalized Hasegawa-Mima equation for the electrostatic potential（involving both vector and scalar nonlinearities） and the equation of motion of ions parallel to magnetic field are obtained. According to experiments of laboratory plasma mainly focused to large scale DIAWs, the possibility of self-organization of DIAWs into the nonlinear solitary vortical structures is shown analytically. Peculiarities of scalar nonlinearities in the formation of solitary vortical structures are widely discussed.

Numerical and Experimental Investigation of Interactions Between Free-Surface Waves and A Floating Breakwater with Cylindrical-Dual/Rectangular-Single Pontoon

This paper investigates the hydrodynamic performance of a cylindrical-dual or rectangular-single pontoon floating breakwater using the numerical method and experimental study. The numerical simulation work is based on the multi-physics computational fluid dynamics(CFD) code and an innovative full-structured dynamic grid method applied to update the three-degree-of-freedom(3-DOF) rigid structure motions. As a time-marching scheme, the trapezoid analogue integral method is used to update the time integration combined with remeshing at each time step.The application of full-structured mesh elements can prevent grids distortion or deformation caused by large-scale movement and improve the stability of calculation. In movable regions, each moving zone is specified with particular motion modes(sway, heave and roll). A series of experimental studies are carried out to validate the performance of the floating body and verify the accuracy of the proposed numerical model. The results are systematically assessed in terms of wave coefficients, mooring line forces, velocity streamlines and the 3-DOF motions of the floating breakwater. When compared with the wave coefficient solutions, excellent agreements are achieved between the computed and experimental data, except in the vicinity of resonant frequency. The velocity streamlines and wave profile movement in the fluid field can also be reproduced using this numerical model.

Three-dimensional simulation of a Ka-band relativistic Cherenkov source with metal photonic-band-gap structures

This paper presents a three-dimensional particle-in-cell （PIC） simulation of a Ka-band relativistic Cherenkov source with a slow wave structure （SWS） consisting of metal photonic band gap （PBG） structures. In the simulation, a perfect match layer boundary is employed to absorb passing band modes supported by the PBG lattice with an artificial metal boundary. The simulated axial field distributions in the cross section and surface of the SWS demonstrate that the device operates in the vicinity of the π point of a TM01-1ike mode. The Fourier transformation spectra of the axial fields as functions of time and space show that only a single frequency appears at 36.27 GHz, which is in good agreement with that of the intersection of the dispersion curve with the slow space charge wave generated on the beam. The simulation results demonstrate that the SWS has good mode selectivity.

A staggered double vane circuit for a W-band traveling-wave tube amplifier

Based on the combination of a staggered double vane slow wave structure （SWS） and round electron beam, a 200-W W-band traveling-wave tube （TWT） amplifier is studied in this paper. The main advantages of round beam operation over the sheet beam is that the round beam can be formed more easily and the focus requirement can be dramatically reduced. It operates in the fundamental mode at the first spatial harmonic. The geometric parameters are optimized and a transition structure for the slow wave circuit is designed which can well match the signal that enters into and goes out from the tube. Then a TWT model is established and the particle-in-cell （PIC） simulation results show that the tube can provide over 200-W output power in a frequency range of 88 GHz-103 GHz with a maximum power of 289 W at 95 GHz, on the assumption that the input power is 0.1 W and the beam power is 5.155 kW. The corresponding conversion efficiency and gain at 95 GHz are expected to be 5.6% and 34.6 dB, respectively. Such amplifiers can potentially be used in high power microwave-power-modules （MPM） and for other portable applications.