Nonreciprocal Single Photon Frequency Conversion via Chiral Coupling between a V-Type System and a Pair of Waveguides

The single photon frequency conversion is investigated theoretically in the system composed of a V-type system chiral coupling to a pair of waveguides. The single photon scattering amplitudes are obtained using the real-space Hamiltonian. The calculated results show that the probability of single photon frequency down-or up-conversion can reach a unit by choosing appropriate parameters in the non-dissipative system with perfect chiral coupling.We present a nonreciprocal single photon beam splitter whose frequency of the output photon is different from that of the input photon. The influences of dissipations and non-perfect chiral coupling on the single frequency conversion are also shown. Our results may be useful in designing quantum devices at the single-photon level.

Single Photon Scattering in a Pair of Waveguides Coupled by a Whispering-Gallery Resonator Interacting with a Semiconductor Quantum Dot

The single photon scattering properties in a pair of waveguides coupled by a whispering-gallery resonator in- teracting with a semiconductor quantum dot are investigated theoretically. The two waveguides support four possible ports for an incident single photon. The quantum dot is considered a V-type system. The incident direction-dependent single photon scattering properties are studied and equal-output probability from the four ports for a single photon incident is discussed. The influences of backscattering between the two modes of the whispering-gallery resonator for incident direction-dependent single photon scattering properties are also pre- sented.

Analysis and engineering of coupled cavity waveguides based on coupled-mode theory

The analytical expression for the transmission spectra of coupled cavity waveguides （CCWs） in photonic crystals （PCs） is derived based on the coupled-mode theory （CMT）. Parameters in the analytical expression can be extracted by simple numerical simulations. We reveal that it is the phase shift between the two adjacent PC defects that uniquely determines the flatness of the impurity bands of CCWs. In addition, it is found that the phase shift also greatly affects the bandwidth of CCWs. Thus, the engineering of the impurity bands of CCWs can be realized through the adjustment of the phase shift. Based on the theoretical results, an interesting phenomenon in which a CCW acts as a single PC defect and its impurity band possesses a Lorentz lineshape is predicted. Very good agreement between the analytical results and the numerical simulations based on transfer matrix method has been achieved.

Preparing quantum vortex states with odd Schrdinger cat states through a coupled waveguide system

A scheme is proposed for preparing a quantum vortex state with a coupled waveguide, in which a single-mode odd cat state with weak intensity and a single-mode coherent state are inserted in the input ports, respectively. The analytical wavefunction of the resulting state in the quadrature space is derived, and the vortex structure of the output state is analyzed. It is found that the obtained states, which may carry a vortex with topological charge index one, are entangled and nonclassical, depending only on the scaled propagation time and the weak intensity of the input odd cat state instead of the displacement parameter of the input coherent state. The phase distribution, however, in the quadrature space, depends on the displacement parameter of the input coherent state

A BIOSENSOR USING COUPLED PLASMON WAVEGUIDE RESONANCE COMBINED WITH HYPERSPECTRAL FLUORESCENCE ANALYSIS

We developed a biosensor that is capable for simultaneous surface plasmon resonance(SPR)sensing and hyperspectral fuores cence analysis in this paper.A symmetrical metal-dielectric slabscheme is employed for the excitation of coupled plasnon waveguide resonance(CPWR)in thepresent work.Resonance bet ween surface plasmon mode and the guided waveguide mode gen-erates narrower full width half-maximum of the refective curves which leads to increased pre.cision for the determination of refractive index over conventional SPR sensors.In addition,CPWR also fers longer surface propagation depths and higher surface electric field strengthsthat enable the excitation of fluorescence with hyperspectral technique to maintain an appreci-able signal-to-noise ratio.The refractive index information obtained from SPR sensing and thechemical properties obt ained through hyperspectral fluorescence analysis confirm each other toexclude false-positive or false-negative cases.The sensor provides a comprehensive understandingof the biological events on the sensor chips.

An Array Consisting of 10 High-Speed Side-Illuminated Evanescently Coupled Waveguide Photodetectors Each with a Bandwidth of 20 GHz

We design and fabricate a parallel system with 10 high speed side-illuminated evanescently coupled waveguide photodetectors （ECPDs）. The 10 ECPDs exhibit a uniform 3dB bandwidth of 20 GHz and low dark current of about i nA at 2 V reverse bias. The 10 ECPDs also exhibit uniform photo-responsivity of about 0.23A/W with an active region of 5 × 25μmS. The photodetector array has a total bandwidth of more than 200 GHz and can be integrated with other optoelectronic devices.

A Perfect Graphene Absorber with Waveguide Coupled High-Contrast Gratings

To achieve the enhancement and manipulation of light absorption in graphene within the visible and near infrared regions, a design consists of high-contrast gratings and two evanescently coupled slabs with graphene monolayer is demonstrated. The operation principle and design process of the proposed structure are analyzed using the coupled mode theory, which is confirmed by the rigorous coupled wave analysis. It is proved that the absorptance of graphene monolayer can be greatly enhanced to unity. The thickness of grating and slab layers can significantly change the line width and resonant mode position in the absorption spectra. Furthermore, high tunability in amplitude and bandwidth of the absorption spectra can be achieved by controlling the structural parameters of the hybrid structure. The proposed devices could be efficiently exploited as tunable and selective absorbers, and could be allowed to realize other two-dimensional materials-based selective photo-detectors.

A High-Sensitivity Refractive-Index Sensor Based on Plasmonic Waveguides Asymmetrically Coupled with a Nanodisk Resonator

A high-sensitivity plasmonic refractive-index sensor based on the asymmetrical coupling of two metal-insulator- metal waveguides with a nanodisk resonator is proposed and simulated in the finite-difference time domain. Both analytic and simulated results show that the resonance wavelengths of the sensor have an approximate linear relationship with the refractive index of the materials which are filled into the slit waveguides and the disk- shaped resonator. The working mechanism of this sensor is exactly due to the linear relationship, based on which tile refractive index of the materials unknown can be obtained from the detection of the resonance wavelength. The measurement sensitivity can reach as high as 6.45 × 10-7, which is nearly five times higher than the results reported in the recent literature [Opt. Commun. 300 （2013） 265]. With an optimum design, the sensing value can be further improved, and it can be widely applied into the biological sensing. Tile sensor working for temperature sensing is also analyzed.

Electromagnetic coupling reduction in dual-band microstrip antenna array using ultra-compact single-negative electric metamaterials for MIMO application

In this paper, an ultra-compact single negative（SNG） electric waveguided metamaterial（WG-MTM） is first investigated and used to reduce the mutual coupling in E ＆ H planes of a dual-band microstrip antenna array. The proposed SNG electric WG-MTM unit cell is designed by etching two different symmetrical spiral lines on the ground, and has two stopbands operating at 1.86 GHz and 2.40 GHz. The circuit size is very compact, which is only λ_0/33.6 ×λ_0/15.1（where λ_0 is the wavelength at 1.86 GHz in free space）. Taking advantage of the dual-stopband property of the proposed SNG electric WG-MTM, a dual-band microstrip antenna array operating at 1.86 GHz and 2.40 GHz with very low mutual coupling is designed by embedding a cross shaped array of the proposed SNG electric WG-MTM. The measured and simulated results of the designed dual-band antenna array are in good agreement with each other, indicating that the mutual coupling of the fabricated dual-band antenna array realizes 9.8/11.1 d B reductions in the H plane, 8.5/7.9 d B reductions in the E plane at1.86 GHz and 2.40 GHz, respectively. Besides, the distance of the antenna elements in the array is only 0.35 λ_0（where λ_0 is the wavelength at 1.86 GHz in free space）. The proposed strategy is used for the first time to reduce the mutual coupling in E ＆ H planes of the dual-band microstrip antenna array by using ultra-compact SNG electric WG-MTM.

Design of a barcode-like waveguide nanostructure for efficient chip-fiber coupling

A barcode-like waveguide nanostructure with discretized multilevel pixel lines is designed and optimized by a nonlinear search algorithm. We obtain the design of a one-dimensional multilevel nanostructure with-1.04 d B efficiency for surface normal coupling to a standard single-mode fiber. Another design is achieved from the automatic optimization process, which enables polarization-independent coupling to a single-mode fiber. The optimum coupling efficiency is simulated to be-2.83 dB for TE and-3.49 for TM polarization centered near the 1550 nm wavelength. Polarization-dependent loss of less than 1 dB over 45.3 nm is achieved.

Coupling length variation and multi-wavelength demultiplexing in photonic crystal waveguides

In this Letter, the effects of material/structure parameters of photonic crystal（Ph C） parallel waveguides on the coupling length are investigated. The results show that, increasing the effective relative permittivity of the Ph C leads to a downward shift of the photonic bandgap and a variation of the coupling length. A compact Ph C 1.31/1.55 μm wavelength division multiplexer（WDM）/demultiplexer with simple structure is proposed,where the output power ratios are more than 24 d B. This WDM can multiplex/demultiplex other light waves efficiently.

Fluid Model of Waveguide Transverse Coupling

In this paper, optical fluid is firstly defined. By using the movement law of hydrodynamics, the transverse coupling of waveguides is discussed. The result fully coincides with the electromagnetic solution.

Numerical analysis of end-fire coupling of surface plasmon polaritons in a metal-insulator-metal waveguide using a simple photoplastic connector

We propose a design for efficient end-fire coupling of surface plasmon polaritons in a metal-insulator-metal(MIM) waveguide with an optical fiber as part of a simple photoplastic connector. The design was analyzed and optimized using the three-dimensional finite-difference time-domain method. The calculated excitation efficiency coefficient of the waveguide is 83.7%(-0.77 dB) at a wavelength of 405 nm. This design enables simple connection of an optical fiber to a MIM waveguide and highly efficient local excitation of the waveguide.Moreover, the length of the metallic elements of the waveguide, and thus the dissipative losses, can be reduced.The proposed design may be useful in plasmonic-type waveguide applications such as near-field investigation of live cells and other objects with super-resolution.

Fabrication of EAM-Integrated DFB Lasers With A Coupling Waveguide

EAM-DFB monolithic light sources with the coupling waveguide between laser and modulator have been developed. 10mw output light power at 90mA and 18dB extinction ratio at -2V has been achieved.

A New Method to Measure the Coupling Efficiency of Waveguide Photodetector

In this paper, a new method is outlined for the estimation of coupling efficiency between a source laser and a WGPD. Internal quantum efficiencies as high as 72% (for 0.15μm device) and 86.5% (for 0.5μm device) are achieved.

Ultraslow-light effects in symmetric and asymmetric waveguide structures with moon-like scatterers

Ultraslow-light effects in two-dimensional hexagonal-lattice coupled waveguide with moon-like scat- terers were theoretically studied using the plane-wave expansion method. For symmetric structures, simulations showed that slow light with high group index can be achieved by shifting the scatterers and adjusting the radius of moon-like scatterers. The maximum group index was over 8.0 × 10^4. For asymmetric structures, simulations showed that slow light with flat band and high group index can be obtained by shifting the scatterers, adjusting the radius of moon-like scatterers, and rotating the scatterers. The maximum group index was over 5.7 ×10^5 with a ＂saddle-like＂ relationship between the frequency and group index.

Controllable single-photon transport in an optical waveguide coupled to an optomechanical cavity with a V-type three-level atom

An optomechanical cavity embedded with a V-type three-level atom is exploited to control single-photon transport in a one-dimensional waveguide. The effects of the atom–cavity detuning, the optomechanical effect,the coupling strengths between the cavity and the atom or the waveguide, and the atomic dissipation on the single-photon transport properties are analyzed systematically. Interestingly, the single-photon transmission spectra show multiple double electromagnetically induced transparency. Moreover, the double electromagnetically induced transparency can be switched to a single one by tuning the atom–cavity detuning.