High-speed and wide-band LiNbO3 waveguide electro-optic intensity modulator has drawn great attention in the field of optical fiber communication and sensor. This paper reports the research results on the measurement ...High-speed and wide-band LiNbO3 waveguide electro-optic intensity modulator has drawn great attention in the field of optical fiber communication and sensor. This paper reports the research results on the measurement of frequency shift characteristics of Mach-Zehnder electro-optic intensity modulator. Two measurement methods of frequency shift characteristics for high and low frequency modulations are studied in theory and experiment and demonstrate different results. The realization of a multi-wavelength optical source based on Mach-Zehnder electro-optic intensity modulator has been introduced. The technique to reach the maximum intensity for interesting shift frequency, particularly for heterodyne detection of Brillouin distributed optical fiber sensing, has been given.展开更多
The characteristics of a conventional LiNbO3 intensity modulator made up of a Mach-Zehnder(MZ) type annealed proton exchange(APE) waveguide and coplanar waveguide(CPW) modulation electrode are presented. The APE waveg...The characteristics of a conventional LiNbO3 intensity modulator made up of a Mach-Zehnder(MZ) type annealed proton exchange(APE) waveguide and coplanar waveguide(CPW) modulation electrode are presented. The APE waveguide characteristics and their relations with process parameters are analyzed. At the same time, the electrical characteristics of modulation electrode, such as modulation voltage, microwave effective index associated with modulation bandwidth, characteristics impedance, are also investigated in detail.展开更多
Electro-optic modulator is a key component for on-chip optical signal processing.An electro-optic phase modulator based on multilayer graphene embedded in silicon nitride waveguide is demonstrated to fulfill low-power...Electro-optic modulator is a key component for on-chip optical signal processing.An electro-optic phase modulator based on multilayer graphene embedded in silicon nitride waveguide is demonstrated to fulfill low-power operation.Finite element method is adopted to investigate the interaction enhancement between the graphene flake and the optical mode.The impact of multilayer graphene on the performance of phase modulator is studied comprehensively.Simulation results show that the modulation efficiency improves with the increment of graphene layer number,as well as the modulation length.The 3-dB bandwidth of around 48 GHz is independent of graphene layer number and length.Compared to modulator with two-or four-layer graphene,the six-layer graphene/silicon nitride waveguide modulator can realizeπphase shift at a low-power consumption of 14 fJ/bit when the modulation length is 240μm.展开更多
A bunch arrival-time monitor(BAM) based on an electro-optical intensity modulation scheme is currently under development at Shanghai Soft X-ray Free-Electron Laser to meet the high-resolution requirements for bunch st...A bunch arrival-time monitor(BAM) based on an electro-optical intensity modulation scheme is currently under development at Shanghai Soft X-ray Free-Electron Laser to meet the high-resolution requirements for bunch stability. The BAM uses a radio frequency signal generated by a pickup cavity to modulate the reference laser pulses in an electro-optical intensity modulator(EOM), and the bunch arrival-time information is derived from the amplitude change of the laser pulse after laser pulse modulation.EOM is a key optical component in the BAM system.Through the basic principle analysis of BAM, many parameters of the EOM are observed to affect the measurement resolution of the BAM system. Therefore, a systematic analysis of the EOM is crucial. In this paper, we present two schemes to compare and analyze an EOM and provide a reference for selecting a new version of the EOM.展开更多
We propose a novel light intensity modulator based on magnetic fluid and liquid crystal(LC) filled photonic crystal fibers(PCFs). The influences of electric and magnetic fields on the transmission intensity are th...We propose a novel light intensity modulator based on magnetic fluid and liquid crystal(LC) filled photonic crystal fibers(PCFs). The influences of electric and magnetic fields on the transmission intensity are theoretically and experimentally analyzed and investigated. Both the electric and magnetic fields can manipulate the molecular arrangement of LC to array a certain angle without changing the refractive index of the LC. Therefore, light loss in the PCF varies with the electric and magnetic fields whereas the peak wavelengths remain constant. The experimental results show that the transmission intensity decreases with the increase of the electric and magnetic fields. The cut-off electric field is 0.899 V/um at 20 Hz and the cut-off magnetic field is 195 m T. This simple and compacted optical modulator will have a great prospect in sensing applications.展开更多
Electro-optic modulators,which convert electrical signals onto the transmission light,are key devices in electro-optic modulating systems.Modulation efficiency is one of the most important parameters of an electro-opt...Electro-optic modulators,which convert electrical signals onto the transmission light,are key devices in electro-optic modulating systems.Modulation efficiency is one of the most important parameters of an electro-optic modulator,which directly determines the footprint and power consumption of the device.Generally,modulation efficiency strongly depends on the electro-optic response of the crystal.The Pb(In_(1/2)Nb_(1/2))O_(3)-Pb(Mg_(1/3)Nb_(2/3))O_(3)-PbTiO_(3)(PIN-PMN-PT)single crystal with giant electro-optic coefficient(λ_(c))and high transparency indicates the potential to achieve greatly enhanced modulation efficiency.In this study,a prototype PIN-PMN-PT phase modulator was fabricated based on a titanium(Ti)in-diffusion waveguide,which is reported for the first time.The influences of titanium in-diffusion on the composition and domain structure of the PIN-PMN-PT single crystal were studied by transmission electron microscopy(TEM)and piezoelectric force microscopy(PFM),respectively.Finally,a half-wave voltage(V_(π))of 2.3 V was obtained using a device with 6-mm-long(L)electrodes.Furthermore,the electro-optic modulation efficiency(V_(π)L)was calculated as 1.38 V-cm,which was approximately one order of magnitude lower than that of commercial lithium niobate(LiNbO_(3),LN)phase modulators.Such enhanced modulation efficiency indicates more compact device and lower power consumption,which is of great significance for electro-optic modulation systems used in micro-fiber gyroscope,integrated photonic devices,etc.展开更多
This Letter introduces the design and simulation of a microstrip-line-based electro-optic (EO) polymer optical phase modulator (PM) that is further enhanced by the addition of photonic crystal (PhC) structures t...This Letter introduces the design and simulation of a microstrip-line-based electro-optic (EO) polymer optical phase modulator (PM) that is further enhanced by the addition of photonic crystal (PhC) structures that are in close proximity to the optical core. The slow-wave PhC structure is designed for two different material configurations and placed in the modulator as a superstrate to the optical core; simulation results are depicted for both 1D and 2D PhC structures. The PM characteristics are modeled using a combination of the finite element method and the optical beam propagation method in both the RF and optical domains, respectively. The phase-shift simulation results show a factor of 1.7 increase in an effective EO coefficient (120 pm/V) while maintaining a broadband bandwidth of 40 GHz.展开更多
To research the effect of a deposited SiO2 insulating layer on the resonance frequency modulation of an SOI nanowaveguide ring cavity during integration fabrication, a rib waveguide ring resonator was systemati- cally...To research the effect of a deposited SiO2 insulating layer on the resonance frequency modulation of an SOI nanowaveguide ring cavity during integration fabrication, a rib waveguide ring resonator was systemati- cally designed and fabricated. SiO2 insulating layers with different thicknesses were deposited for analysis of the frequency shift characteristics. By testing the resonance transmission spectrum power of this structure, it is found that there are blue shifts after SiO2 deposition, and the frequency shift value of a structure with a 500 nm SiO2 insulating layer deposited is 0.8 nm, that is 0.24 THz at the resonance point where wavelength is around 1550 nm. Taking advantage of this conclusion, efficient optical modulation is available by choosing different frequency band resonance wavelengths to narrow the frequency modulation range.展开更多
基金supported by Program for New Century Excellent Talents in University under Grand No. NCET-06-0925.
文摘High-speed and wide-band LiNbO3 waveguide electro-optic intensity modulator has drawn great attention in the field of optical fiber communication and sensor. This paper reports the research results on the measurement of frequency shift characteristics of Mach-Zehnder electro-optic intensity modulator. Two measurement methods of frequency shift characteristics for high and low frequency modulations are studied in theory and experiment and demonstrate different results. The realization of a multi-wavelength optical source based on Mach-Zehnder electro-optic intensity modulator has been introduced. The technique to reach the maximum intensity for interesting shift frequency, particularly for heterodyne detection of Brillouin distributed optical fiber sensing, has been given.
文摘The characteristics of a conventional LiNbO3 intensity modulator made up of a Mach-Zehnder(MZ) type annealed proton exchange(APE) waveguide and coplanar waveguide(CPW) modulation electrode are presented. The APE waveguide characteristics and their relations with process parameters are analyzed. At the same time, the electrical characteristics of modulation electrode, such as modulation voltage, microwave effective index associated with modulation bandwidth, characteristics impedance, are also investigated in detail.
基金the National Key Research and Development Program of China(Grant No.2019YFB2203001)the National Natural Science Foundation of China(Grant Nos.61675087,61875069,and 61605057)the Science and Technology Development Plan of Jilin Province,China(Grant No.JJKH20190118KJ).
文摘Electro-optic modulator is a key component for on-chip optical signal processing.An electro-optic phase modulator based on multilayer graphene embedded in silicon nitride waveguide is demonstrated to fulfill low-power operation.Finite element method is adopted to investigate the interaction enhancement between the graphene flake and the optical mode.The impact of multilayer graphene on the performance of phase modulator is studied comprehensively.Simulation results show that the modulation efficiency improves with the increment of graphene layer number,as well as the modulation length.The 3-dB bandwidth of around 48 GHz is independent of graphene layer number and length.Compared to modulator with two-or four-layer graphene,the six-layer graphene/silicon nitride waveguide modulator can realizeπphase shift at a low-power consumption of 14 fJ/bit when the modulation length is 240μm.
基金supported by the National Key R&D Plan(No.2016YFA0401900)
文摘A bunch arrival-time monitor(BAM) based on an electro-optical intensity modulation scheme is currently under development at Shanghai Soft X-ray Free-Electron Laser to meet the high-resolution requirements for bunch stability. The BAM uses a radio frequency signal generated by a pickup cavity to modulate the reference laser pulses in an electro-optical intensity modulator(EOM), and the bunch arrival-time information is derived from the amplitude change of the laser pulse after laser pulse modulation.EOM is a key optical component in the BAM system.Through the basic principle analysis of BAM, many parameters of the EOM are observed to affect the measurement resolution of the BAM system. Therefore, a systematic analysis of the EOM is crucial. In this paper, we present two schemes to compare and analyze an EOM and provide a reference for selecting a new version of the EOM.
基金Supported by the Joint Research Fund in Astronomy under Cooperative Agreement between the National Natural Science Foundation of China and Chinese Academy of Sciences under Grant No U1531102the Fundamental Research Funds for the Central Universities under Grant No HEUCF181116the National Natural Science Foundation of China under Grant Nos61107059,61077047 and 11264001
文摘We propose a novel light intensity modulator based on magnetic fluid and liquid crystal(LC) filled photonic crystal fibers(PCFs). The influences of electric and magnetic fields on the transmission intensity are theoretically and experimentally analyzed and investigated. Both the electric and magnetic fields can manipulate the molecular arrangement of LC to array a certain angle without changing the refractive index of the LC. Therefore, light loss in the PCF varies with the electric and magnetic fields whereas the peak wavelengths remain constant. The experimental results show that the transmission intensity decreases with the increase of the electric and magnetic fields. The cut-off electric field is 0.899 V/um at 20 Hz and the cut-off magnetic field is 195 m T. This simple and compacted optical modulator will have a great prospect in sensing applications.
基金supported by the National Natural Science Foundation of China(Grant Nos.52102143,51772239,62001369,62075088,and 51761145024)Shaanxi Province Project(Grant Nos.2017ktpt-21 and 2018TD-024)Jiangxi Technological Innovation Guidance Science and Technology Plan(Grant No.S20212BDH80017).
文摘Electro-optic modulators,which convert electrical signals onto the transmission light,are key devices in electro-optic modulating systems.Modulation efficiency is one of the most important parameters of an electro-optic modulator,which directly determines the footprint and power consumption of the device.Generally,modulation efficiency strongly depends on the electro-optic response of the crystal.The Pb(In_(1/2)Nb_(1/2))O_(3)-Pb(Mg_(1/3)Nb_(2/3))O_(3)-PbTiO_(3)(PIN-PMN-PT)single crystal with giant electro-optic coefficient(λ_(c))and high transparency indicates the potential to achieve greatly enhanced modulation efficiency.In this study,a prototype PIN-PMN-PT phase modulator was fabricated based on a titanium(Ti)in-diffusion waveguide,which is reported for the first time.The influences of titanium in-diffusion on the composition and domain structure of the PIN-PMN-PT single crystal were studied by transmission electron microscopy(TEM)and piezoelectric force microscopy(PFM),respectively.Finally,a half-wave voltage(V_(π))of 2.3 V was obtained using a device with 6-mm-long(L)electrodes.Furthermore,the electro-optic modulation efficiency(V_(π)L)was calculated as 1.38 V-cm,which was approximately one order of magnitude lower than that of commercial lithium niobate(LiNbO_(3),LN)phase modulators.Such enhanced modulation efficiency indicates more compact device and lower power consumption,which is of great significance for electro-optic modulation systems used in micro-fiber gyroscope,integrated photonic devices,etc.
文摘This Letter introduces the design and simulation of a microstrip-line-based electro-optic (EO) polymer optical phase modulator (PM) that is further enhanced by the addition of photonic crystal (PhC) structures that are in close proximity to the optical core. The slow-wave PhC structure is designed for two different material configurations and placed in the modulator as a superstrate to the optical core; simulation results are depicted for both 1D and 2D PhC structures. The PM characteristics are modeled using a combination of the finite element method and the optical beam propagation method in both the RF and optical domains, respectively. The phase-shift simulation results show a factor of 1.7 increase in an effective EO coefficient (120 pm/V) while maintaining a broadband bandwidth of 40 GHz.
基金Project supported by the National Natural Science Foundation of China(No.61076111)the National Scientific Instruments Basic Research Program of China(No.61127008)
文摘To research the effect of a deposited SiO2 insulating layer on the resonance frequency modulation of an SOI nanowaveguide ring cavity during integration fabrication, a rib waveguide ring resonator was systemati- cally designed and fabricated. SiO2 insulating layers with different thicknesses were deposited for analysis of the frequency shift characteristics. By testing the resonance transmission spectrum power of this structure, it is found that there are blue shifts after SiO2 deposition, and the frequency shift value of a structure with a 500 nm SiO2 insulating layer deposited is 0.8 nm, that is 0.24 THz at the resonance point where wavelength is around 1550 nm. Taking advantage of this conclusion, efficient optical modulation is available by choosing different frequency band resonance wavelengths to narrow the frequency modulation range.