In order to analyze the effect of wavelength-dependent radiation-induced attenuation （RIA） on the mean trans- mission wavelength in optical fiber and the scale factor of interferometric fiber optic gyroscopes （IFOG...In order to analyze the effect of wavelength-dependent radiation-induced attenuation （RIA） on the mean trans- mission wavelength in optical fiber and the scale factor of interferometric fiber optic gyroscopes （IFOGs）, three types of polarization-maintaining （PM） fibers are tested by using a 60Co γ-radiation source. The observed different mean wave- length shift （MWS） behaviors for different fibers are interpreted by color-center theory involving dose rate-dependent absorption bands in ultraviolet and visible ranges and total dose-dependent near-infrared absorption bands. To evaluate the mean wavelength variation in a fiber coil and the induced scale factor change for space-borne IFOGs under low radiation doses in a space environment, the influence of dose rate on the mean wavelength is investigated by testing four germanium （Ge） doped fibers and two germanium-phosphorus （Ge-P） codoped fibers irradiated at different dose rates. Experimental results indicate that the Ge-doped fibers show the least mean wavelength shift during irradiation and their mean wavelength of optical signal transmission in fibers will shift to a shorter wavelength in a low-dose-rate radiation environment. Finally, the change in the scale factor of IFOG resulting from the mean wavelength shift is estimated and tested, and it is found that the significant radiation-induced scale factor variation must be considered during the design of space-borne IFOGs.展开更多
In this paper we investigate the effects of base width variation on performance of long wavelength transistor laser. In our structure with increasing the base width, the cut off frequency increases until 367 nm with 2...In this paper we investigate the effects of base width variation on performance of long wavelength transistor laser. In our structure with increasing the base width, the cut off frequency increases until 367 nm with 24.5 GHz and then abruptly fall. In 100 nm base width, we have 17.5 GHz cut off frequency, and overall ac performances become optimized, although, other parameters like optical losses and threshold current density are not optimized.展开更多
基金Project supported by the National Natural Science Foundation of China (Grant No. 61007040)
文摘In order to analyze the effect of wavelength-dependent radiation-induced attenuation （RIA） on the mean trans- mission wavelength in optical fiber and the scale factor of interferometric fiber optic gyroscopes （IFOGs）, three types of polarization-maintaining （PM） fibers are tested by using a 60Co γ-radiation source. The observed different mean wave- length shift （MWS） behaviors for different fibers are interpreted by color-center theory involving dose rate-dependent absorption bands in ultraviolet and visible ranges and total dose-dependent near-infrared absorption bands. To evaluate the mean wavelength variation in a fiber coil and the induced scale factor change for space-borne IFOGs under low radiation doses in a space environment, the influence of dose rate on the mean wavelength is investigated by testing four germanium （Ge） doped fibers and two germanium-phosphorus （Ge-P） codoped fibers irradiated at different dose rates. Experimental results indicate that the Ge-doped fibers show the least mean wavelength shift during irradiation and their mean wavelength of optical signal transmission in fibers will shift to a shorter wavelength in a low-dose-rate radiation environment. Finally, the change in the scale factor of IFOG resulting from the mean wavelength shift is estimated and tested, and it is found that the significant radiation-induced scale factor variation must be considered during the design of space-borne IFOGs.
文摘In this paper we investigate the effects of base width variation on performance of long wavelength transistor laser. In our structure with increasing the base width, the cut off frequency increases until 367 nm with 24.5 GHz and then abruptly fall. In 100 nm base width, we have 17.5 GHz cut off frequency, and overall ac performances become optimized, although, other parameters like optical losses and threshold current density are not optimized.
