Enhanced Fourier Transform Using Wavelet Packet Decomposition

Many domains, including communication, signal processing, and image processing, use the Fourier Transform as a mathematical tool for signal analysis. Although it can analyze signals with steady and transitory properties, it has limits. The Wavelet Packet Decomposition (WPD) is a novel technique that we suggest in this study as a way to improve the Fourier Transform and get beyond these drawbacks. In this experiment, we specifically considered the utilization of Daubechies level 4 for the wavelet transformation. The choice of Daubechies level 4 was motivated by several reasons. Daubechies wavelets are known for their compact support, orthogonality, and good time-frequency localization. By choosing Daubechies level 4, we aimed to strike a balance between preserving important transient information and avoiding excessive noise or oversmoothing in the transformed signal. Then we compared the outcomes of our suggested approach to the conventional Fourier Transform using a non-stationary signal. The findings demonstrated that the suggested method offered a more accurate representation of non-stationary and transient signals in the frequency domain. Our method precisely showed a 12% reduction in MSE and a 3% rise in PSNR for the standard Fourier transform, as well as a 35% decrease in MSE and an 8% increase in PSNR for voice signals when compared to the traditional wavelet packet decomposition method.

Theoretical research on structural damage alarming of long-span bridges using wavelet packet analysis

The state equation and observation equation of the structural dynamic systems under various analysis scales are derived based on wavelet packet analysis. The time-frequency properties of structural dynamic response under various scales are further formulated. The theoretical analysis results reveal that the wavelet packet energy spectrum （WPES） obtained from wavelet packet decomposition of structural dynamic response will detect the presence of structural damage. The sensitivity analysis of the WPES to structural damage and measurement noise is also performed. The transfer properties of the structural system matrix and the observation noise under various analysis scales are formulated, which verify the damage alarming reliability using the proposed WPES with preferable damage sensitivity and noise robusticity.

Structural health monitoring of long-span suspension bridges using wavelet packet analysis

During the service life of civil engineering structures such as long-span bridges, local damage at key positions may continually accumulate, and may finally result in their sudden failure. One core issue of global vibration-based health monitoring methods is to seek some damage indices that are sensitive to structural damage, This paper proposes an online structural health monitoring method for long-span suspension bridges using wavelet packet transform （WPT）. The WPT- based method is based on the energy variations of structural ambient vibration responses decomposed using wavelet packet analysis. The main feature of this method is that the proposed wavelet packet energy spectrum （WPES） has the ability to detect structural damage from ambient vibration tests of a long-span suspension bridge. As an example application, the WPES-based health monitoring system is used on the Runyang Suspension Bridge under daily environmental conditions. The analysis reveals that changes in environmental temperature have a long-term influence on the WPES, while the effect of traffic loadings on the measured WPES of the bridge presents instantaneous changes because of the nonstationary properties of the loadings. The condition indication indices VD reflect the influences of environmental temperature on the dynamic properties of the Runyang Suspension Bridge. The field tests demonstrate that the proposed WPES-based condition indication index VD is a good candidate index for health monitoring of long-span suspension bridges under ambient excitations.

Separation of closely spaced modes by combining complex envelope displacement analysis with method of generating intrinsic mode functions through filtering algorithm based on wavelet packet decomposition

One of the important issues in the system identification and the spectrum analysis is the frequency resolution, i.e., the capability of distinguishing between two or more closely spaced frequency components. In the modal identification by the empirical mode decomposition （EMD） method, because of the separating capability of the method, it is still a challenge to consistently and reliably identify the parameters of structures of which modes are not well separated. A new method is introduced to generate the intrin- sic mode functions （IMFs） through the filtering algorithm based on the wavelet packet decomposition （GIFWPD）. In this paper, it is demonstrated that the CIFWPD method alone has a good capability of separating close modes, even under the severe condition beyond the critical frequency ratio limit which makes it impossible to separate two closely spaced harmonics by the EMD method. However, the GIFWPD-only based method is impelled to use a very fine sampling frequency with consequent prohibitive computational costs. Therefore, in order to decrease the computational load by reducing the amount of samples and improve the effectiveness of separation by increasing the frequency ratio, the present paper uses a combination of the complex envelope displacement analysis （CEDA） and the GIFWPD method. For the validation, two examples from the previous works are taken to show the results obtained by the GIFWPD-only based method and by combining the CEDA with the GIFWPD method.

Time Domain Signal Analysis Using Wavelet Packet Decomposition Approach

This paper explains a study conducted based on wavelet packet transform techniques. In this paper the key idea underlying the construction of wavelet packet analysis (WPA) with various wavelet basis sets is elaborated. Since wavelet packet decomposition can provide more precise frequency resolution than wavelet decomposition the implementation of one dimensional wavelet packet transform and their usefulness in time signal analysis and synthesis is illustrated. A mother or basis wavelet is first chosen for five wavelet filter families such as Haar, Daubechies (Db4), Coiflet, Symlet and dmey. The signal is then decomposed to a set of scaled and translated versions of the mother wavelet also known as time and frequency parameters. Analysis and synthesis of the time signal is performed around 8 seconds to 25 seconds. This was conducted to determine the effect of the choice of mother wavelet on the time signals. Results are also prepared for the comparison of the signal at each decomposition level. The physical changes that are occurred during each decomposition level can be observed from the results. The results show that wavelet filter with WPA are useful for analysis and synthesis purpose. In terms of signal quality and the time required for the analysis and synthesis, the Haar wavelet has been seen to be the best mother wavelet. This is taken from the analysis of the signal to noise ratio (SNR) value which is around 300 dB to 315 dB for the four decomposition levels.

HYBRID WAVELET PACKET-TEAGER ENERGY OPERATOR ANALYSIS AND ITS APPLICATION FOR GEARBOX FAULT DIAGNOSIS

Based on wavelet packet decomposition （WPD） algorithm and Teager energy operator （TEO）, a novel gearbox fault detection and diagnosis method is proposed. Its process is expatiated after the principles of WPD and TEO modulation are introduced respectively. The preprocessed sigaaal is interpolated with the cubic spline function, then expanded over the selected basis wavelets. Grouping its wavelet packet components of the signal based on the minimum entropy criterion, the interpolated signal can be decomposed into its dominant components with nearly distinct fault frequency contents. To extract the demodulation information of each dominant component, TEO is used. The performance of the proposed method is assessed by means of several tests on vibration signals collected from the gearbox mounted on a heavy truck. It is proved that hybrid WPD-TEO method is effective and robust for detecting and diagnosing localized gearbox faults.

A NOVEL METHOD FOR NETWORK WORM DETECTION BASED ON WAVELET PACKET ANALYSIS

Objective To detect unknown network worm at its early propagation stage. Methods On the basis of characteristics of network worm attack, the concept of failed connection flow (FCT) was defined. Based on wavelet packet analysis of FCT time series, this method computed the energy associated with each wavelet packet of FCT time series, transformed the FCT time series into a series of energy distribution vector on frequency domain, then a trained K-nearest neighbor (KNN) classifier was applied to identify the worm. Results The experiment showed that the method could identify network worm when the worm started to scan. Compared to theoretic value, the identification error ratio was 5.69%. Conclusion The method can detect unknown network worm at its early propagation stage effectively.

Application of Wavelet Packet De-noising in Time-Frequency Analysis of the Local Wave Method

The local wave method is a very good time-frequency method for nonstationaryvibration signal analysis. But the interfering noise has a big influence on the accuracy oftime-frequency analysis. The wavelet packet de-noising method can eliminate the interference ofnoise and improve the signal-noise-ratio. This paper uses the local wave method to decompose thede-noising signal and perform a time-frequency analysis. We can get better characteristics. Finally,an example of wavelet packet de-noising and a local wave time-frequency spectrum application ofdiesel engine surface vibration signal is put forward.

Influence of explosion parameters on wavelet packet frequency band energy distribution of blast vibration

Blast vibration analysis is one of the important foundations for studying the control technology of blast vibration damage. According to blast vibration live data that have been collected and the characteristics of short-time non-stationary random signals, the wavelet packet energy spectrum analysis for blast vibration signal has made by wavelet packet analysis technology and the signals were measured under different explosion parameters （the maximal section dose, the distance of blast source to measuring point and the section number of millisecond detonator）. The results show that more than 95% frequency band energy of the signals sl-s8 concentrates at 0-200 Hz and the main vibration frequency bands of the signals sl-s8 are 70.313-125, 46.875-93.75, 15.625-93.75, 0-62.5, 42.969-125, 15.625-82.031, 7.813-62.5 and 0-62.5 Hz. Energy distributions for different frequency bands of blast vibration signal are obtained and the characteristics of energy distributions for blast vibration signal measured under different explosion parameters are analyzed. From blast vibration signal energy, the decreasing law of blast seismic waves measured under different explosion parameters was studied and the wavelet packet analysis is an effective means for studying seismic effect induced by blast.

Study of the Functions of Wavelet Packet Transform （WPT） and Continues Wavelet Transform （CWT） in Recognizing the Damage Specification

Modem and efficient methods focus on signal analysis and have drawn researchers＇ attention to it in recent years. These methods mainly include Continuous Wavelet and Wavelet Packet transforms. The main advantage of the application of these Wavelets is their capacity to analyze the signal position in different occasions and places. However, in sites with high frequencies its resolution becomes much more difficult. Wavelet packet transform is a more advanced form of continuous wavelets and can make a perfect level by level resolution for each signal. Although very few studies have been done in the field. In order to do this, in the present study, f^st there was an attempt to do a modal analysis on the structure by the ANSYS finite elements software, then using MATLAB, the wavelet was investigated through a continuous wavelet analysis. Finally the results were displayed in 2-D location-coefficient figures. In the second form, transient-dynamic analysis was done on the structure to find out the characteristics of the damage and the wavelet packet energy rate index was suggested. The results indicate that suggested index in the second form is both practical and applicable, and also this index is sensitive to the intensity of the damage.

Construction of Orthogonal Vector-valued Wavelets and Characteristics of Vector-valued Wavelet Packets

The notion of vector-valued multiresolution analysis is introduced and the concept of orthogonal vector-valued wavelets with 3-scale is proposed. A necessary and sufficient condition on the existence of orthogonal vector-valued wavelets is given by means of paraunitary vector filter bank theory. An algorithm for constructing a class of compactly supported orthogonal vector-valued wavelets is presented. Their characteristics is discussed by virtue of operator theory, time-frequency method. Moreover, it is shown how to design various orthonormal bases of space L^2（R, C^n） from these wavelet packets.

The Biorthogonality of Multiple Vector-valued Bivariate Wavelet Packets

The notion of a sort of biorthogonal multiple vector-valued bivariate wavelet packets,which are associated with a quantity dilation matrix,is introduced.The biorthogonality property of the multiple vector-valued wavelet packets in higher dimensions is studied by means of Fourier transform and integral transform biorthogonality formulas concerning these wavelet packets are obtained.

Characterizations of Orthogonal Vector-valued Multivariate Wavelet Packets

In this paper, the notion of orthogonal vector-valued wavelet packets of space L2 （R^s, C^n） is introduced. A procedure for constructing the orthogonal vector-valued wavelet packets is presented. Their properties are characterized by virtue of time-frequency analysis method, matrix theory and finite group theory, and three orthogonality formulas are obtained. Finally, new orthonormal bases of space L2（R^s,C^n） are extracted from these wavelet packets.

Novel Adaptive Beamforming Algorithm Based on Wavelet Packet Transform

An analysis of the received signal of array antennas shows that the received signal has multi-resolution characteristics, and hence the wavelet packet theory can be used to detect the signal. By emplying wavelet packet theory to adaptive beamforming, a wavelet packet transform-based adaptive beamforming algorithm (WP-ABF) is proposed . This WP-ABF algorithm uses wavelet packet transform as the preprocessing, and the wavelet packet transformed signal uses least mean square algorithm to implement the ~adaptive beamforming. White noise can be wiped off under wavelet packet transform according to the different characteristics of signal and white under the wavelet packet transform. Theoretical analysis and simulations demonstrate that the proposed WP-ABF algorithm converges faster than the conventional adaptive beamforming algorithm and the wavelet transform-based beamforming algorithm. Simulation results also reveal that the convergence of the algorithm relates closely to the wavelet base and series; that is, the algorithm convergence gets better with the increasing of series, and for the same series of wavelet base the convergence gets better with the increasing of regularity.

Application of wavelet packet in gravity anomaly processing

Based on the advantages of the wavelet to separate regional field and local anomalies in MATLAB environment,a high-precision regional-residual separation was finally realized. Analytical continuation and trend surface analysis are conventional methods for gravity anomaly separation. But the wavelet packet analysis in analyzing gravity data can make the gravity anomaly to be computed at a higher precision. In this paper,wavelet packet method is used to process gravity anomaly data obtained in Laos,and the separation result is good. Daubechies wavelet series has a higher precision in the wavelet packet.

Impulse Response Identification Based on Varying Scale Orthogonal Wavelet Packet Transform

In this paper, by applying a group of specific orthogonal wavelet packet to Eykho?algorithm, a new impulse response identification algorithm based on varying scale orthogonal WPTis provided. In comparison to Eykho? algorithm, the new algorithm has better practicability andwider application range. Simulation results show that the proposed impulse response identificationalgorithm can be applied to both deterministic and random systems, and is of higher identificationprecision, stronger anti-noise interference ability and better system dynamic tracking property.

Orthogonal Matrix-Valued Wavelet Packets

In this paper, we introduce matrix-valued multiresolution analysis and matrix- valued wavelet packets. A procedure for the construction of the orthogonal matrix-valued wavelet packets is presented. The properties of the matrix-valued wavelet packets are investigated. In particular, a new orthonormal basis of L2(R, Cs×s) is obtained from the matrix-valued wavelet packets.

NON-ORTHOGONAL P-WAVELET PACKETS ON THE HALF-LINE

In this paper, the notion of p-wavelet packets on the positive half-line P＋ is introduced. A new method for constructing non-orthogonal wavelet packets related to Walsh functions is developed by splitting the wavelet subspaces directly instead of using the lowpass and high-pass filters associated with the multiresolution analysis as used in the classical theory of wavelet packets. Further, the method overcomes the difficulty of constructing non-orthogonal wavelet packets of the dilation factor p 〉 2.

基于SVD-WPA的模拟电路故障特征提取方法

针对模拟电路中电路元件由于容差带来的故障诊断问题,提出了一种基于奇异值分解(SVD)结合小波包分析的模拟电路故障特征提取方法。首先对待测电路的输出信号进行奇异值分解重构,提高故障信号与无故障信号之间的区分度,然后利用小波包分析(WPA)对重构信号进行两层小波分解重构,得到故障特征。最后将故障特征采用网格搜索法改进的支持向量机中进行分类识别。仿真实验结果表明,奇异值分解结合小波包能量谱所提取的故障特征具有更好的区分度,验证了该方法的有效性和可行性。

基于小波包变换及互相关的古建木材声发射源定位研究

为研究古建筑木构件在承载过程中产生损伤定位问题,利用铅芯折断在木材表面模拟损伤源结合声发射技术对产生的损伤源进行检测。对采集的声发射信号首先采用小波包分解重构对信号进行去噪处理,利用互相关技术对重构信号进行互相关分析进而确定信号到达各传感器时差,最后结合时差定位法对声发射源进行定位。试验结果表明:该方法可以有效提高损伤源的定位精度,理论值与实际位置相差很小,从而为准确地反演出声发射源提供有效途径。