期刊文献+
共找到2篇文章
< 1 >
每页显示 20 50 100
Self-powered broadband kesterite photodetector with ultrahigh specific detectivity for weak light applications
1
作者 Guang-Xing Liang Chuan-Hao Li +9 位作者 Jun Zhao Yi Fu Zi-Xuan Yu Zhuang-Hao Zheng Zheng-Hua Su Ping Fan Xiang-Hua Zhang Jing-Ting Luo Liming Ding Shuo Chen 《SusMat》 SCIE EI 2023年第5期682-696,共15页
Kesterite Cu_(2)ZnSn(S,Se)_(4)(CZTSSe)is a promising candidate for photodetector(PD)applications thanks to its excellent optoelectronic properties.In this work,a green solution-processed spin coating and selenization-... Kesterite Cu_(2)ZnSn(S,Se)_(4)(CZTSSe)is a promising candidate for photodetector(PD)applications thanks to its excellent optoelectronic properties.In this work,a green solution-processed spin coating and selenization-processed thermodynamic or kinetic growth of high-quality narrow bandgap kesterite CZTSSe thin film is developed.A self-powered CZTSSe/CdS thin-film PD is then successfully fabricated.Under optimization of light absorber and heterojunction interface,especially tailoring the defect and carrier kinetics,it can achieve broadband response from300 to 1300 nm,accompaniedwith a high responsivity of 1.37A/W,specific detectivity(D*)up to 4.0×10^(14)Jones under 5 nW/cm^(2),a linear dynamic range(LDR)of 126 dB,and a maximum Ilight/Idark ratio of 1.3×10^(8)within the LDR,and ultrafast response speed(rise/decay time of 16 ns/85 ns),representing the leading-level performance to date,which is superior to those of commercial andwell-researched photodiodes.Additionally,an imaging system with a 905nm laser is built for weak light response evaluation,and can respond to 718 pW weak light and infrared imaging at a wavelength as low as 5 nW/cm2.It has also been employed for photoplethysmography detection of pulsating signals at both the finger and wrist,presenting obvious arterial blood volume changes,demonstrating great application potential in broadband and weak light photodetection scenarios. 展开更多
关键词 DETECTIVITY KESTERITE PHOTODETECTOR thin film weak light detection
原文传递
基于氯化物处理的钙钛矿自供电无电荷传输层光电探测器用于弱光检测
2
作者 梁海霞 张钧尧 +5 位作者 高玉山 郭璞 李立 郭子亿 吴岳 黄佳 《Science China Materials》 SCIE EI CAS CSCD 2024年第7期2193-2200,共8页
有机-无机卤化物钙钛矿因其可溶液加工和优异的光电特性而在光电探测器(PD)中得到了广泛应用.然而,基于钙钛矿的PD一般需要电荷传输层提供足够的分离和传输驱动力,这会增加钙钛矿PD的材料成本.本研究通过溶液法制备了基于苯基三甲基氯化... 有机-无机卤化物钙钛矿因其可溶液加工和优异的光电特性而在光电探测器(PD)中得到了广泛应用.然而,基于钙钛矿的PD一般需要电荷传输层提供足够的分离和传输驱动力,这会增加钙钛矿PD的材料成本.本研究通过溶液法制备了基于苯基三甲基氯化铵(PTACl)处理的无电荷传输层钙钛矿自供电PD.以(CsFAMA)Pb(BrI)3作为光活性层,这种三元阳离子混合卤化物钙钛矿沉积后的垂直分布差异为电荷分离和传输提供了驱动力,PTACl处理能加强电荷分离和运输.这种PD在自供电模式下表现出优异的光电探测性能,其中光暗电流比为1.8×10^(5),响应度为198 mA W^(−1),探测率为1.48×10^(13)/1.24×10^(11) Jones(暗/噪声电流法计算).没有封装的PD在700 h的测试中也表现出良好的空气稳定性,且该PD对0.64 nW cm^(−2)的弱光仍有明显的响应,PD阵列也验证了这种弱光检测能力.本工作制备的钙钛矿自供电PD为弱光检测的发展提供了一种简单可行的途径. 展开更多
关键词 PHOTODETECTORS perovskites weak light detection charge transport layer free
原文传递
上一页 1 下一页 到第
使用帮助 返回顶部