Prediction of Coefficient of Restitution for Impact Elastoplastic Spheres Considering Finite Plate Thickness

Collisions between objects are a relatively common phenomenon in nature.Analyses of collision processes can greatly contribute to solving problems such as impact-rub faults and particle impacts.The coefficient of restitution is a critical parameter in the analysis of collision processes.Many experiments have shown that the coefficient of restitution is closely related to the plate thickness,and the smaller the plate thickness,the more inaccurate the coefficient of restitution predicted by the existing model,which seriously affects the process of collision analysis.To remedy this shortcoming,this paper proposes a plate thickness influence factor with the ratio of sphere diameter to plate thickness as the variable.The plate thickness influence factor can optimize the coefficient of restitution model to effectively predict the coefficient of restitution of impacting elastoplastic spheres with finite plate thickness.Finally,the validity of the new model is verified using a large amount of experimental data.

Core-shell mesoporous carbon hollow spheres as Se hosts for advanced Al-Se batteries

Incorporating a selenium(Se)positive electrode into aluminum(Al)-ion batteries is an effective strategy for improving the overall battery performance.However,the cycling stability of Se positive electrodes has challenges due to the dissolution of intermediate reaction products.In this work,we aim to harness the advantages of Se while reducing its limitations by preparing a core-shell mesoporous carbon hollow sphere with a titanium nitride(C@TiN)host to load 63.9wt%Se as the positive electrode material for Al-Se batteries.Using the physical and chemical confinement offered by the hollow mesoporous carbon and TiN,the obtained core-shell mesoporous carbon hollow spheres coated with Se(Se@C@TiN)display superior utilization of the active material and remarkable cycling stability.As a result,Al-Se batteries equipped with the as-prepared Se@C@TiN composite positive electrodes show an initial discharge specific capacity of 377 mAh·g^(-1)at a current density of 1000 mA·g^(-1)while maintaining a discharge specific capacity of 86.0 mAh·g^(-1)over 200 cycles.This improved cycling performance is ascribed to the high electrical conductivity of the core-shell mesoporous carbon hollow spheres and the unique three-dimensional hierarchical architecture of Se@C@TiN.

Poly(ethylenimine)-assisted synthesis of hollow carbon spheres comprising multi-sized Ni species for CO_(2) electroreduction

Electrochemical CO_(2) reduction to produce value-added chemicals and fuels is one of the research hotspots in the field of energy conversion.The development of efficient catalysts with high conductivity and readily accessible active sites for CO_(2) electroreduction remains challenging yet indispensable.In this work,a reliable poly(ethyleneimine)(PEI)-assisted strategy is developed to prepare a hollow carbon nanocomposite comprising a single-site Ni-modified carbon shell and confined Ni nanoparticles(NPs)(denoted as Ni@NHCS),where PEI not only functions as a mediator to induce the highly dispersed growth of Ni NPs within hollow carbon spheres,but also as a nitrogen precursor to construct highly active atomically-dispersed Ni-Nx sites.Benefiting from the unique structural properties of Ni@NHCS,the aggregation and exposure of Ni NPs can be effectively prevented,while the accessibility of abundant catalytically active Ni-Nx sites can be ensured.As a result,Ni@NHCS exhibits a high CO partial current density of 26.9 mA cm^(-2) and a Faradaic efficiency of 93.0% at-1.0 V vs.RHE,outperforming those of its PEI-free analog.Apart from the excellent activity and selectivity,the shell confinement effect of the hollow carbon sphere endows this catalyst with long-term stability.The findings here are anticipated to help understand the structure-activity relationship in Ni-based carbon catalyst systems for electrocatalytic CO_(2) reduction.Furthermore,the PEI-assisted synthetic concept is potentially applicable to the preparation of high-performance metal-based nanoconfined materials tailored for diverse energy conversion applications and beyond.

基于Photo Sphere Viewer的轻量化可量测街景系统研究

随着新型基础测绘体系发展,测绘技术和装备不断升级,大量街景数据随着车载激光扫描工作一并被采集。针对该数据路线随机性大、密集程度高等特点,以及传统街景地图系统插件受限、扩展性不强、无法量测等局限,本文设计了基于Photo Sphere Viewer的轻量化可量测街景系统,在开源插件的基础上实现了对其组件的扩充、实现了行进方向、地图交互等系统功能的设计优化,进一步实现了基于深度图的街景地图量测功能。生产作业队伍对系统的使用结果表明,该系统可以辅助生产作业队伍进行属性采集、纹理更新、数据检查等多项工作,操作灵活便捷,且具有较强的可扩展性,便于基于生产需求进行改进调整,提高了生产效率,为新型基础测绘成果进一步深化应用提供了良好的借鉴作用。

Low-temperatures synthesis of CuS nanospheres as cathode material for magnesium second batteries

Rechargeable magnesium batteries(RMBs),as one of the most promising candidates for efficient energy storage devices with high energy,power density and high safety,have attracted increasing attention.However,searching for suitable cathode materials with fast diffusion kinetics and exploring their magnesium storage mechanisms remains a great challenge.Cu S submicron spheres,made by a facile low-temperature synthesis strategy,were applied as the high-performance cathode for RMBs in this work,which can deliver a high specific capacity of 396mAh g^(-1)at 20 mA g^(-1) and a remarkable rate capacity of 250 m Ah g^(-1)at 1000 mA g^(-1).The excellent rate performance can be assigned to the nano needle-like particles on the surface of Cu S submicron spheres,which can facilitate the diffusion kinetics of Mg^(2+).Further storage mechanism investigations illustrate that the Cu S cathodes experience a two-step conversion reaction controlled by diffusion during the electrochemical reaction process.This work could make a contribution to the study of the enhancement of diffusion kinetics of Mg2+and the reaction mechanism of RMBs.

Electrochemical hydrogen evolution efficiently boosted by interfacial charge redistribution in Ru/MoSe_(2) embedded mesoporous hollow carbon spheres

The strong metal-support interaction inducing combined effect plays a crucial role in the catalysis reaction. Herein, we revealed that the combined advantages of MoSe_(2), Ru, and hollow carbon spheres in the form of Ru nanoparticles(NPs) anchored on a two-dimensionally ordered MoSe_(2) nanosheet-embedded mesoporous hollow carbon spheres surface(Ru/MoSe_(2)@MHCS) for the largely boosted hydrogen evolution reaction(HER) performance. The combined advantages from the conductive support, oxyphilic MoSe_(2), and Ru active sites imparted a strong synergistic effect and charge redistribution in the Ru periphery which induced high catalytic activity, stability, and kinetics for HER. Specifically, the obtained Ru/MoSe_(2)@MHCS required a small overpotential of 25.5 and 38.4 mV to drive the kinetic current density of 10 mA cm^(-2)both in acid and alkaline media, respectively, which was comparable to that of the Pt/C catalyst. Experimental and theoretical results demonstrated that the charge transfer from MoSe_(2) to Ru NPs enriched the electronic density of Ru sites and thus facilitated hydrogen adsorption and water dissociation. The current work showed the significant interfacial engineering in Ru-based catalysts development and catalysis promotion effect understanding via the metal-support interaction.

Measurement and simulation of the leakage neutron spectra from Fe spheres bombarded with 14 MeV neutrons

Iron is commonly used as a structural and shielding material in nuclear devices. The accuracy of its nuclear data is critical for the design of nuclear devices. The evaluation data of ^(56)Fe isotopes in the latest version of the CENDL-3.2 library from China was significantly updated. This new data must be tested before it can be used. To test the reliability of this data and assess the shielding effect, a shielding benchmark experiment was conducted with natural Fe spherical samples using a pulsed deuterium–tritium neutron source at the China Institute of Atomic Energy(CIAE). The leakage neutron spectra from the natural spherical iron samples with different thicknesses(4.5, 7.5, and 12 cm) were measured between 0.8 and 16 MeV after interacting with 14 MeV neutrons using the time-of-flight method. The simulation results were obtained by Monte Carlo simulations by employing the Fe data from the CENDL-3.2, ENDF/B-VIII.0, and JEDNL-5.0 libraries. The measured and simulated leakage neutron spectra and penetration rates were compared, demonstrating that the CENDL-3.2 library performs sufficiently overall. The simulation results of the other two libraries were underestimated for scattering at the continuum energy level.

An Improved Approach for Interaction of Wave with Floating Spheres and Its Applications

To develop and utilize marine resources in the deep sea, the higher requirements for floating structures, which are operated in marine environment for a long term, have been put forward. Reasonable structure type and accurate force analysis are favorable guarantees to improve the survival performance and working performance of the floating structures. Floating spheres fastened by mooring cable were widely used in floating structures. In this paper, the wave forces of the floating sphere are efficiently and accurately calculated by solving the geometric relationship between the non-submerged floating sphere and wave surface. Combined with the hydrodynamic calculation of mooring cables based on the lumped mass method, the coupled motion model of multi-floating spheres fastened by multi-mooring cable was established under wave action. Furthermore, according to the floating structures fastened by mooring cable in the actual ocean engineering, the topological method of multi-mooring cables fastening the multifloating spheres was expounded from simple to complex. Finally, the modeling method and preliminarily hydrodynamic characteristics of the fastened floating structures, including the mooring system of renewable energy devices, ocean buoy, and coral nursery, were presented and analyzed in detail. The obtained results showed that the method for calculating the wave force on the floating sphere developed in this paper can accurately describe the motion process of the floating mooring sphere and the force on the mooring cable. Also, the topological method of multiple buoys and multiple mooring cables could efficiently establish various numerical hydrodynamic models of fastened buoys in ocean engineering.

Strength and failure characteristics of marble spheres subjected to paired point loads

Failure of irregular rock samples may provide implications in the rapid estimation of rock strength,which is imperative in rock engineering practice.In this work,analytical,experimental and numerical investigations were carried out to study the mechanical properties and failure characteristics of rock spheres under paired point loads.Analytical solutions indicted that with the increase in sample size(contact angle)and decrease in Poisson’s ratio,the uneven tensile stress in theta direction decreased.Then laboratory experiments were carried out to investigate the load characteristics and failure mode of spherical marble samples with different sizes subjected to a pair of diametral point loads.The discrete element method(DEM)was adopted to study the failure process of rock spheres.The effect of the sphere diameter on the point load contact angle was examined in terms of peak load,crushed zone distribution and energy dissipation.Experimental and numerical results showed that the samples primarily fail in tension,with crushed zones formed at both loading points.With increase in the sample size,the contact angle,crushed area and total work increase.As the specimen diameter increases from 30 mm to 50 mm,the peak load on the specimen increases from 3.6 kN to 8.8 kN,and the percentage of crushed zone(ratio of crushing zone to sample radius,d/r)increased from 0.191 to 0.262.The results of the study have implications for understanding the failure of irregular rock specimens under point loading conditions and their size effects.

ON THE FIGIEL TYPE PROBLEM AND EXTENSION OFε-ISOMETRY BETWEEN UNIT SPHERES

This paper studies two isometric problems between unit spheres of Banach spaces.In the first part,we introduce and study the Figiel type problem of isometric embeddings between unit spheres.However,the classical Figiel theorem on the whole space cannot be trivially generalized to this case,and this is pointed out by a counterexample.After establishing this,we find a natural necessary condition required by the existence of the Figiel operator.Furthermore,we prove that when X is a space with the T-property,this condition is also sufficient for an isometric embedding T:S_(X)→S_(Y) to admit the Figiel operator.This answers the Figiel type problem on unit spheres for a large class of spaces.In the second part,we consider the extension of bijectiveε-isometries between unit spheres of two Banach spaces.It is shown that every bijectiveε-isometry between unit spheres of a local GL-space and another Banach space can be extended to be a bijective 5ε-isometry between the corresponding unit balls.In particular,whenε=0,this recovers the MUP for local GL-spaces obtained in[40].

CLASSIFICATIONS OF DUPIN HYPERSURFACES IN LIE SPHERE GEOMETRY

This is a survey of local and global classification results concerning Dupin hypersurfaces in S^(n)(or R^(n))that have been obtained in the context of Lie sphere geometry.The emphasis is on results that relate Dupin hypersurfaces to isoparametric hypersurfaces in spheres.Along with these classification results,many important concepts from Lie sphere geometry,such as curvature spheres,Lie curvatures,and Legendre lifts of submanifolds of S^(n)(or R^(n)),are described in detail.The paper also contains several important constructions of Dupin hypersurfaces with certain special properties.

Spherically Symmetric Problem of General Relativity for a Fluid Sphere

The paper is devoted to a spherically symmetric problem of General Relativity (GR) for a fluid sphere. The problem is solved within the framework of a special geometry of the Riemannian space induced by gravitation. According to this geometry, the four-dimensional Riemannian space is assumed to be Euclidean with respect to the space coordinates and Riemannian with respect to the time coordinate. Such interpretation of the Riemannian space allows us to obtain complete set of GR equations for the external empty space and the internal spaces for incompressible and compressible perfect fluids. The obtained analytical solution for an incompressible fluid is compared with the Schwarzchild solution. For a sphere consisting of compressible fluid or gas, a numerical solution is presented and discussed.

Exactly Solvable Two-Parameter Models of Relativistic δ′s -Sphere Interactions in Quantum Mechanics

We make a systematic study of two-parameter models of δ ′ s -sphere interaction and δ ′ s -sphere plus a Coulomb interaction. Where δ ′ s interaction denotes the δ ′ -sphere interaction of the second kind. We provide the mathematical definitions of Hamiltonians and obtain new results for both models, in particular the resolvents equations, spectral properties and some scattering quantities.

Size-controlled preparation of hollow silica spheres and glyphosate release

Different-sized hollow SiO2 spheres of 249–1348 nm in diameter were successfully prepared by using Na2SiO3 as the precursor and using polystyrene and polystyrene-methyl acrylic acid latexes as the templates. The diameter and shell thickness of the hollow SiO2 spheres increase with increasing the latex template diameter at a given mass ratio of SiO2 to latex template. The diameter and shell thickness of the hollow SiO2 spheres also increase with increasing the mass ratios of SiO2 to latex template. The presence of carboxylic acid groups on the surfaces of polystyrene-methyl acrylic acid latex templates favors the formation of dense and uniform SiO2 shells. The hollow SiO2 sphere is constructed by mesoporous shell with large specific surface area. When glyphosate is used as a release model chemical, glyphosate release rate is tuned by varying the shell thickness.

Preparation and in vitro release studies of thymosin-loaded PLA microspheres

To obtain a kind of convenient oral dosage form of protein, which can be fully absorbed and is efficient and safe, the thymosin-loaded PLA（polylactic acid） microspheres are prepared by the emulsification- solvent evaporation method and the orthogonal design is used to optimize the technology of preparation. The form of the medicament microspheres of thymosin are proved by differential thermal analysis （DTA）. The drug content is determined by the Lowry method, and the package ratio of medicament microspheres of thymosin and drug release in vitro are calculated. The results show that the average diameter and encapsulation efficiency of the product prepared according to the optimized formulation are 13. 8 μm and 80. 7%, respectively. The in vitro release behavior within 12 h can be described by the Higuchi equation with T1/2 = 295 rain. There are no significant changes in size distribution and residual drug contents after being stored at 25℃ and 40 ℃ for 90 d, respectively. Due to the fact that its thymosin content and package ratio meet the requirement, and its releasing half life is long, the thymosin-loaded PLA microsohere has a favorable application future.

Preparation of BiVO4 Hollow Spheres and its Photocatalytic Degradation of Methylene Blue

Monoclinic BiVO4 hollow nanospheres were successfully prepared via template-free method using citric acid （C6H8O7） as chelating agent and characterized by X-ray diffraction patterns, transmission electron microscope, UV-Vis DRS, and TG-DTA technique. C6H8O7 played an important role in the formation of hollow spheres. Morphology observations revealed that when appropriate amount of C6H8O7 was introduced, the cavity with the diameter of 40 nm was obtained in BiVO4 nanospheres. UV-Vis diffuse reflectance spectra indicated that the samples had absorption in both UV and visible light region. The photocatalytic activities were evaluated by the degradation of methylene blue under Xe lamp irradiation. Hollow spheres endow BiVO4 samples with greatly improved photocatalytic activity. A possible formation mechanism of hollow spheres was proposed.

CalliSpheres载药微球在肝癌介入治疗中的临床疗效评价

对58例原发性肝癌和24例转移性肝癌患者采用载药微球经导管灌注化疗栓塞治疗,采用改良实体肿瘤疗效评价标准对2组患者进行疗效评价,比较2组患者治疗后肝功能变化及术后并发症发生率。原发组和转移组治疗后的1个月疾病缓解率分别为74.14%和50.00%,疾病控制率分别为100.00%和75.00%,差异有统计学意义(P<0.05)。转移组肝脏功能损害高于原发组(P<0.05)。2组患者术后均出现不同程度的并发症,但转移组发生概率高于对照组,部分差异有统计学意义。CalliSpheres载药微球经导管灌注化疗栓塞肝癌安全有效,在疗效方面原发性肝癌比转移性肝癌更为确切,安全性更高。

应用碘油和8Spheres聚乙烯醇栓塞微球联合明胶海绵行经导管动脉化疗栓塞术治疗大肝癌的临床效果观察

目的观察应用碘油和8Spheres聚乙烯醇栓塞微球联合明胶海绵行经导管动脉化疗栓塞术(TACE)治疗大肝癌的近期效果和安全性。方法将124例大肝癌(病灶直径≥5cm)患者随机分为两组,每组62例,观察组采用碘油+化疗药物+8Spheres聚乙烯醇栓塞微球+明胶海绵行TACE治疗,对照组采用化疗药物+8Spheres聚乙烯醇栓塞微球行TACE治疗。比较两组患者近期临床疗效及手术前后血清甲胎蛋白水平、不良反应发生率。结果两组患者均顺利完成手术,中位随访时间10个月。观察组患者术后3个月、6个月治疗总有效率分别为90.32%、77.42%,均高于对照组的70.97%、51.61%,观察组中位疾病进展时间为8.1个月,长于对照组的6.2个月(均P<0.05);两组的不良反应发生率差异无统计学意义(P>0.05)。结论采用碘油+化疗药物+8Spheres聚乙烯醇栓塞微球联合明胶海绵行TACE治疗大肝癌近期效果好,安全性高。

CalliSpheres微球联合空白微球TACE治疗中晚期肝癌的近期疗效及安全性研究

目的探讨CalliSpheres载药微球联合空白微球(8Spheres)TACE治疗中晚期肝癌近期临床疗效和安全性。方法回顾性分析2016年7月至2017年11月行CalliSpheres载药微球联合8Spheres栓塞微球(DEB-TACE组)TACE 50例,罂粟乙碘化油联合8Spheres栓塞微球(cTACE组)48例患者的临床资料,比较两组间疾病缓解率、控制率及并发症发生率,比较两组患者术前和术后3 d肝功能指标。结果基线数据在两组间差异无统计学意义(P>0.05)。DEB-TACE组3、6个月疾病缓解率均高于cTACE组(P<0.05),且DEB-TACE组6个月疾病进展发生率、血清AFP升高率较低,近期疗效优于cTACE组(P<0.05)。术后3 d cTACE组ALT、AST较DEB-TACE组升高明显(P<0.05)。两组患者术后均无严重不良反应发生。结论 CalliSpheres载药微球联合8Spheres栓塞微球TACE在中晚期肝癌中的近期临床疗效优于罂粟乙碘油联合8Spheres栓塞微球,且安全性较高。

Hydrothermal synthesis of monodisperse Zn_(x)Cd_(1-x)S spheres and their photocatalytic properties

Monodisperse ZnxCd1-xS spheres were successfully fabricated with a high yield by a facile hydrothermal route.The as-prepared samples were characterized by X-ray diffractometry,scanning electron microscopy and UV-vis diffusion reflectance spectroscopy.The results indicate that all the prepared samples have the same hexagonal wurtzite phase and exhibit good size uniformity and regularity.Degradation of rhodamine-B（RhB） was used to evaluate the photocatalytic activities of ZnxCd1-xS samples.Zn0.4Cd0.6S possessed the best photocatalytic activity and exhibited high stability during the reaction.