For Al 6k21-T4 overlap weld joint,the shear-tensile strength by using the weaving laser was improved as compared to the case of linear laser.For the specimen of low strength,the porosity was distributed continuously a...For Al 6k21-T4 overlap weld joint,the shear-tensile strength by using the weaving laser was improved as compared to the case of linear laser.For the specimen of low strength,the porosity was distributed continuously along the intersection between the plates and fusion line.However,for the optimized welding condition,large oval-shaped porosities were located only in the advancing track of the concave part.Therefore,the continuity of cracks and porosities played a key role to determine the strength.And,the weaving width was also the important parameter to control the strength.Furthermore,the concave part had more significant hot and cold cracking in the weld and heat-affected zone（HAZ）,respectively,than the convex part.展开更多
基金supported by a grant from the Ministry of Knowledge Economy,Republic of Koreaby NCRC (National Core Research Center) Program through the National Research Foundation of Korea funded by the Ministry of Education,Science and Technology (2010-0001-222)
文摘For Al 6k21-T4 overlap weld joint,the shear-tensile strength by using the weaving laser was improved as compared to the case of linear laser.For the specimen of low strength,the porosity was distributed continuously along the intersection between the plates and fusion line.However,for the optimized welding condition,large oval-shaped porosities were located only in the advancing track of the concave part.Therefore,the continuity of cracks and porosities played a key role to determine the strength.And,the weaving width was also the important parameter to control the strength.Furthermore,the concave part had more significant hot and cold cracking in the weld and heat-affected zone（HAZ）,respectively,than the convex part.
