A redundant subspace weighting procedure for clock ensemble

A redundant-subspace-weighting(RSW)-based approach is proposed to enhance the frequency stability on a time scale of a clock ensemble.In this method,multiple overlapping subspaces are constructed in the clock ensemble,and the weight of each clock in this ensemble is defined by using the spatial covariance matrix.The superimposition average of covariances in different subspaces reduces the correlations between clocks in the same laboratory to some extent.After optimizing the parameters of this weighting procedure,the frequency stabilities of virtual clock ensembles are significantly improved in most cases.

Preconditioned iterative methods for solving weighted linear least squares problems

A class of preconditioned iterative methods, i.e., preconditioned generalized accelerated overrelaxation （GAOR） methods, is proposed to solve linear systems based on a class of weighted linear least squares problems. The convergence and comparison results are obtained. The comparison results show that the convergence rate of the preconditioned iterative methods is better than that of the original methods. Furthermore, the effectiveness of the proposed methods is shown in the numerical experiment.

Engineering Geological Zoning of Soft-Soil Foundation Based on Combination Weighting and Extension Methods

Different criteria and factors are used in different methods of soft soil foundation settlement calculation and engineering geological zoning.The methods used are not universally suitable for complex geological environments.The post-construction settlement of soft soil foundations are especially large and difficult to calculate.In addition,there are many deficiencies in the current methods used for engineering geological zoning.Focusing on the need of establishing engineering geological zoning for areas with soft soil foundations in the Tianjin Marine Economic Area,combination weighting and extension methods were introduced.An evaluation model for the settlement of soft soil foundations was established using multiple factors and large amounts of data.This evaluation model is accurate and objective for delineating engineering geological zoning.These methods eliminate deficiencies by considering both objective and subjective factors,and help obtain an objective and accurate result.

Physics-Informed Neural Networks with Two Weighted Loss Function Methods for Interactions of Two-Dimensional Oceanic Internal Solitary Waves

The multiple patterns of internal solitary wave interactions(ISWI)are a complex oceanic phenomenon.Satellite remote sensing techniques indirectly detect these ISWI,but do not provide information on their detailed structure and dynamics.Recently,the authors considered a three-layer fluid with shear flow and developed a(2+1)Kadomtsev-Petviashvili(KP)model that is capable of describing five types of oceanic ISWI,including O-type,P-type,TO-type,TP-type,and Y-shaped.Deep learning models,particularly physics-informed neural networks(PINN),are widely used in the field of fluids and internal solitary waves.However,the authors find that the amplitude of internal solitary waves is much smaller than the wavelength and the ISWI occur at relatively large spatial scales,and these characteristics lead to an imbalance in the loss function of the PINN model.To solve this problem,the authors introduce two weighted loss function methods,the fixed weighing and the adaptive weighting methods,to improve the PINN model.This successfully simulated the detailed structure and dynamics of ISWI,with simulation results corresponding to the satellite images.In particular,the adaptive weighting method can automatically update the weights of different terms in the loss function and outperforms the fixed weighting method in terms of generalization ability.

Modelling of debris-flow susceptibility and propagation: a case study from Northwest Himalaya

The geological and geographical position of the Northwest Himalayas makes it a vulnerable area for mass movements particularly landslides and debris flows. Mass movements have had a substantial impact on the study area which is extending along Karakorum Highway(KKH) from Besham to Chilas. Intense seismicity, deep gorges, steep terrain and extreme climatic events trigger multiple mountain hazards along the KKH, among which debris flow is recognized as the most destructive geohazard. This study aims to prepare a field-based debris flow inventory map at a regional scale along a 200 km stretch from Besham to Chilas. A total of 117 debris flows were identified in the field, and subsequently, a point-based debris-flow inventory and catchment delineation were performed through Arc GIS analysis. Regional scale debris flow susceptibility and propagation maps were prepared using Weighted Overlay Method(WOM) and Flow-R technique sequentially. Predisposing factors include slope, slope aspect, elevation, Topographic Roughness Index(TRI), Topographic Wetness Index(TWI), stream buffer, distance to faults, lithology rainfall, curvature, and collapsed material layer. The dataset was randomly divided into training data(75%) and validation data(25%). Results were validated through the Receiver Operator Characteristics(ROC) curve. Results show that Area Under the Curve(AUC) using WOM model is 79.2%. Flow-R propagation of debris flow shows that the 13.15%, 22.94%, and 63.91% areas are very high, high, and low susceptible to debris flow respectively. The propagation predicated by Flow-R validates the naturally occurring debris flow propagation as observed in the field surveys. The output of this research will provide valuable input to the decision makers for the site selection, designing of the prevention system, and for the protection of current infrastructure.

Integrated Analysis of Water Quality in Artificial Fishponds Using WQI and GIS in South-East Sierra Leone

Artificial fishponds play a pivotal role in global aquaculture, serving as a source of livelihood and nourishment for many communities. Ensuring the sustained health and productivity of Fishes in these environments relies heavily on water quality management. This assessment was done to determine the water quality of ten artificial fishponds in the south-eastern part of Sierra Leone using twelve physicochemical factors (pH, BOD, EC, TDS, turbidity, COD, Fe2+, Mg2+, Ca2+, NH3, , and alkalinity) to find out the Water Quality Index (WQI) and spatial distribution of respective parameters. The assessment of artificial fishponds using WQI and Inverse Distant Weighting (IDW) integration represents a relatively underexplored area within the domain of environmental water resources. The WQI was determined using the “Weighted Arithmetic Water Quality Index’’ method. The results of WQI in the study area range from 65.05 to 147.26. Several locations have water quality deemed unsuitable for consumption, while others range from good to very poor. It is essential to address and improve water quality in locations categorized as unsuitable for consumption and very poor to ensure safe and healthy water sources. It was also clear from the calculation that the smaller the mean concentration value of the pH as compared to the ideal value (7), the smaller the WQI value and the better the water quality. To keep the artificial fishpond water in good condition, mass domestic use should be controlled, and draining of surrounding organic matter should be stopped in ponds Bo_001, Kenema_001, and Kenema_002.

Comprehensive evaluation of the transformer oil-paper insulation state based on RF-combination weighting and an improved TOPSIS method

The accurate identification of the oil-paper insulation state of a transformer is crucial for most maintenance strategies.This paper presents a multi-feature comprehensive evaluation model based on combination weighting and an improved technique for order of preference by similarity to ideal solution(TOPSIS)method to perform an objective and scientific evaluation of the transformer oil-paper insulation state.Firstly,multiple aging features are extracted from the recovery voltage polarization spectrum and the extended Debye equivalent circuit owing to the limitations of using a single feature for evaluation.A standard evaluation index system is then established by using the collected time-domain dielectric spectrum data.Secondly,this study implements the per-unit value concept to integrate the dimension of the index matrix and calculates the objective weight by using the random forest algorithm.Furthermore,it combines the weighting model to overcome the drawbacks of the single weighting method by using the indicators and considering the subjective experience of experts and the random forest algorithm.Lastly,the enhanced TOPSIS approach is used to determine the insulation quality of an oil-paper transformer.A verification example demonstrates that the evaluation model developed in this study can efficiently and accurately diagnose the insulation status of transformers.Essentially,this study presents a novel approach for the assessment of transformer oil-paper insulation.

Benefit allocation model of distributed photovoltaic power generation vehicle shed and energy storage charging pile based on integrated weighting-Shapley method

In this study,to develop a benefit-allocation model,in-depth analysis of a distributed photovoltaic-powergeneration carport and energy-storage charging-pile project was performed;the model was developed using Shapley integrated-empowerment benefit-distribution method.First,through literature survey and expert interview to identify the risk factors at various stages of the project,a dynamic risk-factor indicator system is developed.Second,to obtain a more meaningful risk-calculation result,the subjective and objective weights are combined,the weights of the risk factors at each stage are determined by the expert scoring method and entropy weight method,and the interest distribution model based on multi-dimensional risk factors is established.Finally,an example is used to verify the rationality of the method for the benefit distribution of the charging-pile project.The results of the example indicate that the limitations of the Shapley method can be reasonably avoided,and the applicability of the model for the benefit distribution of the charging-pile project is verified.

ADAPTIVE FUSION ALGORITHMS BASED ON WEIGHTED LEAST SQUARE METHOD

Weighted fusion algorithms, which can be applied in the area of multi-sensor data fusion, are advanced based on weighted least square method. A weighted fusion algorithm, in which the relationship between weight coefficients and measurement noise is established, is proposed by giving attention to the correlation of measurement noise. Then a simplified weighted fusion algorithm is deduced on the assumption that measurement noise is uncorrelated. In addition, an algorithm, which can adjust the weight coefficients in the simplified algorithm by making estimations of measurement noise from measurements, is presented. It is proved by emulation and experiment that the precision performance of the multi-sensor system based on these algorithms is better than that of the multi-sensor system based on other algorithms.

Recursive weighted least squares estimation algorithm based on minimum model error principle

Kalman filter is commonly used in data filtering and parameters estimation of nonlinear system,such as projectile's trajectory estimation and control.While there is a drawback that the prior error covariance matrix and filter parameters are difficult to be determined,which may result in filtering divergence.As to the problem that the accuracy of state estimation for nonlinear ballistic model strongly depends on its mathematical model,we improve the weighted least squares method(WLSM)with minimum model error principle.Invariant embedding method is adopted to solve the cost function including the model error.With the knowledge of measurement data and measurement error covariance matrix,we use gradient descent algorithm to determine the weighting matrix of model error.The uncertainty and linearization error of model are recursively estimated by the proposed method,thus achieving an online filtering estimation of the observations.Simulation results indicate that the proposed recursive estimation algorithm is insensitive to initial conditions and of good robustness.

WEIGHT FUNCTION FOR STRESS INTENSITY FACTORS IN ROTATING THICK-WALLED CYLINDER

The equation of stress intensity factors（SIF） of internally pressurized thick-walled cylinder was used as the reference case. SIF equation of rotating thick-walled cylinder containing a radial crack along the internal bore was presented in weight function method. The weight function formulas were worked out and can be used for all kinds of depth of cracks, rotating speed, material, size of thick-walled cylinder to calculate the stress intensity factors. The results indicated the validity and effectiveness of these formulas. Meanwhile, the rules of the stress intensity factors in rotating thick-walled cylinder with the change of crack depths and the ratio of outer radius to inner radius were studied. The studies are valuable to engineering application.

Data point selection for weighted least square fitting of cavity decay time constant

For the accurate extraction of cavity decay time, a selection of data points is supplemented to the weighted least square method. We derive the expected precision, accuracy and computation cost of this improved method, and examine these performances by simulation. By comparing this method with the nonlinear least square fitting （NLSF） method and the linear regression of the sum （LRS） method in derivations and simulations, we find that this method can achieve the same or even better precision, comparable accuracy, and lower computation cost. We test this method by experimental decay signals. The results are in agreement with the ones obtained from the nonlinear least square fitting method.

Frequency Weighting Filter Design for Automotive Ride Comfort Evaluation

Few study gives guidance to design weighting filters according to the frequency weighting factors,and the additional evaluation method of automotive ride comfort is not made good use of in some countries.Based on the regularities of the weighting factors,a method is proposed and the vertical and horizontal weighting filters are developed.The whole frequency range is divided several times into two parts with respective regularity.For each division,a parallel filter constituted by a low-and a high-pass filter with the same cutoff frequency and the quality factor is utilized to achieve section factors.The cascading of these parallel filters obtains entire factors.These filters own a high order.But,low order filters are preferred in some applications.The bilinear transformation method and the least P-norm optimal infinite impulse response（IIR） filter design method are employed to develop low order filters to approximate the weightings in the standard.In addition,with the window method,the linear phase finite impulse response（FIR） filter is designed to keep the signal from distorting and to obtain the staircase weighting.For the same case,the traditional method produces 0.330 7 m · s^–2 weighted root mean square（r.m.s.） acceleration and the filtering method gives 0.311 9 m · s^–2 r.m.s.The fourth order filter for approximation of vertical weighting obtains 0.313 9 m · s^–2 r.m.s.Crest factors of the acceleration signal weighted by the weighting filter and the fourth order filter are 3.002 7 and 3.011 1,respectively.This paper proposes several methods to design frequency weighting filters for automotive ride comfort evaluation,and these developed weighting filters are effective.

Size effect of lattice material and minimum weight design

The size effects of microstructure of lattice materials on structural analysis and minimum weight design are studied with extented multiscale finite element method（EMsFEM） in the paper. With the same volume of base material and configuration, the structural displacement and maximum axial stress of micro-rod of lattice structures with different sizes of microstructure are analyzed and compared.It is pointed out that different from the traditional mathematical homogenization method, EMsFEM is suitable for analyzing the structures which is constituted with lattice materials and composed of quantities of finite-sized micro-rods.The minimum weight design of structures composed of lattice material is studied with downscaling calculation of EMsFEM under stress constraints of micro-rods. The optimal design results show that the weight of the structure increases with the decrease of the size of basic sub-unit cells. The paper presents a new approach for analysis and optimization of lattice materials in complex engineering constructions.

A WEIGHTED RESIDUAL METHOD FOR ELASTIC-PLASTIC ANALYSIS NEAR A CRACK TIP AND THE CALCULATION OF THE PLASTIC STRESS INTENSITY FACTORS

In this paper, a weighted residual method for the elastic-plastic analysis near a crack tip is systematically given by taking the model of power-law hardening under plane strain condition as a sample. The elastic-plastic solutions of the crack lip field and an approach based on the superposition of the nonlinear finite element method on the complete solution in the whole crack body field, to calculate the plastic stress intensity factors, are also developed. Therefore, a complete analvsis based on the calculation both for the crack tip field and for the whole crack body field is provided.

Indoor air quality risk assessment on the Canadian campus by a multilevel integrated weighted average method

Increasing incidents of indoor air quality(IAQ) related complaints lead us to the fact that IAQ has become a significant occupational health and environmental issue. However, how to effectively evaluate IAQ under different scale of multiple indicators is still a challenge. The traditional single-indicator method is subjected to uncertainties in assessing IAQ due to different subjectivity on good or bad quality and scalar differences of data set. In this study, a multilevel integrated weighted average IAQ method including initial walking through assessment(IWA) and two-layers weighted average method are developed and applied to evaluate IAQ of the laboratory building at the University of Regina in Canada. Some important chemical parameters related to IAQ in terms of volatile organic compounds(VOCs), methanol(HCHO), carbon dioxide(CO2), and carbon monoxide(CO) are evaluated based on 5 months continuous monitoring data. The new integrated assessment result can not only indicates the risk of an individual parameter, but also able to quantify the overall IAQ risk on the sampling site. Finally, some recommendations based on the result are proposed to address sustainable IAQ practices in the sampling area.

Study on Entropy Weight Coefficient Method and Application for Water Quality Evaluation

In order to evaluate the quality of water environment, the conception of entropy is applied in information science, and the entropy weight model is built to evaluate comprehensively water quality. The indexes weights of water quality are determined by value of entropy. This kind of method is applied on evaluating water quality in the new water to be built. The result shows that the water quality in it which supply water is between grade Ⅲ and Ⅳ, and the result is similar to that of gray related method.

STUDY ON FREQUENCY ESTIMATION BASED ON WEIGHTED LEAST SQUARE METHOD WITH THREE FOURIER COEFFICIENTS

In this paper,a sinusoidal signal frequency estimation algorithm is proposed by weighted least square method.Based on the idea of Provencher,three biggest Fourier coefficients in the maximum periodogram are considered,the Fourier coefficients can be written as three equations about the amplitude,phase,and frequency,and the frequency is estimated by solving equations.Because of the error of measurement,weighted least square method is used to solve the frequency equation and get the signal frequency.It is shown that the proposed estimator can approach the Cramer-Rao Bound(CRB)with a low Signal-to-Noise Ratio(SNR)threshold and has a higher accuracy.

A weight's agglomerative method for detecting communities in weighted networks based on weight's similarity

This paper proposes the new definition of the community structure of the weighted networks that groups of nodes in which the edge＇s weights distribute uniformly but at random between them. It can describe the steady connections between nodes or some similarity between nodes＇ functions effectively. In order to detect the community structure efficiently, a threshold coefficient t~ to evaluate the equivalence of edges＇ weights and a new weighted modularity based on the weight＇s similarity are proposed. Then, constructing the weighted matrix and using the agglomerative mechanism, it presents a weight＇s agglomerative method based on optimizing the modularity to detect communities. For a network with n nodes, the algorithm can detect the community structure in time O（n2 log~）. Simulations on networks show that the algorithm has higher accuracy and precision than the existing techniques. Furthermore, with the change of t~ the algorithm discovers a special hierarchical organization which can describe the various steady connections between nodes in groups.

Evaluation Model of Rural Drinking Water Project Based on Entropy Weight and Fuzzy Comprehensive Evaluation Method

Based on Measures for Assessment of Rural Drinking Water Standard Raising Action in Zhejiang Province,this study established an evaluation system for rural drinking water project in Zhejiang Province,covering three primary indicators of project construction,project management and project performance,and 18 secondary indicators.It proposed an evaluation model based on entropy weight and fuzzy evaluation method.It solved the problems of the objectivity of the indicator weight and the quantification of the indicators,and can well achieve the coordination and unity of fuzziness and accuracy.Using this model,it evaluated a rural drinking water project in a county and concluded that both accuracy and feasibility of the model are high.