Node of network has lots of information, such as topology, text and label information. Therefore, node classification is an open issue. Recently, one vector of node is directly connected at the end of another vector. ...Node of network has lots of information, such as topology, text and label information. Therefore, node classification is an open issue. Recently, one vector of node is directly connected at the end of another vector. However, this method actually obtains the performance by extending dimensions and considering that the text and structural information are one-to-one, which is obviously unreasonable. Regarding this issue, a method by weighting vectors is proposed in this paper. Three methods, negative logarithm, modulus and sigmoid function are used to weight-trained vectors, then recombine the weighted vectors and put them into the SVM classifier for evaluation output. By comparing three different weighting methods, the results showed that using negative logarithm weighting achieved better results than the other two using modulus and sigmoid function weighting, and was superior to directly concatenating vectors in the same dimension.展开更多
Renewable energy sources are gaining popularity,particularly photovoltaic energy as a clean energy source.This is evident in the advancement of scientific research aimed at improving solar cell performance.Due to the ...Renewable energy sources are gaining popularity,particularly photovoltaic energy as a clean energy source.This is evident in the advancement of scientific research aimed at improving solar cell performance.Due to the non-linear nature of the photovoltaic cell,modeling solar cells and extracting their parameters is one of the most important challenges in this discipline.As a result,the use of optimization algorithms to solve this problem is expanding and evolving at a rapid rate.In this paper,a weIghted meaN oF vectOrs algorithm(INFO)that calculates the weighted mean for a set of vectors in the search space has been applied to estimate the parameters of solar cells in an efficient and precise way.In each generation,the INFO utilizes three operations to update the vectors’locations:updating rules,vector merging,and local search.The INFO is applied to estimate the parameters of static models such as single and double diodes,as well as dynamic models such as integral and fractional models.The outcomes of all applications are examined and compared to several recent algorithms.As well as the results are evaluated through statistical analysis.The results analyzed supported the proposed algorithm’s efficiency,accuracy,and durability when compared to recent optimization algorithms.展开更多
Risk management of projects is about the real time ev aluation and making of decisions proactively in order to maximize the probabilit y of achieving or surpassing the targets set for project objectives. Project objec...Risk management of projects is about the real time ev aluation and making of decisions proactively in order to maximize the probabilit y of achieving or surpassing the targets set for project objectives. Project objective generally includes three elements: time, cost, quality. Risk occurrin g in the projects will affect these three factors to some various degrees in the end. There are different emphases in each stage and integrated balanced goals b etween the three factors. A large complex engineering project generally consists of several stages each of which has variable objective combinations leading to variable important risks. In order to achieve strategic goals on the schedule under the restriction of lim ited resources, the paper gives the analysis of the so-called risk identificati on-assessment process on the basis of objective orientation. In this paper the set of involved mostly hazards is presented in terms of given objective weight v ector, and so is the model of risk ranking .By reducing the range of risk factor s step by step, risk manager could pay more attention to important ventures and effectively control of them. According to different objective combination at different stages, primary risk f actor sets at different stages are given. With the probability and their various effects to project objectives, evaluation of these sets is made aiming to r educing of the scope of risks and providing decision maker with a better decisio ns support. Successful projects are those, which focus on the relevant business objectives t hroughout the whole process and seek to information integration across project l ife cycle. This paper also introduces the idea of real time process of risk iden tification-assessment and presents a flow chart as a demonstration.展开更多
Van der Pauw's function is often used in the measurement of a semiconductor's resistivity. However, it is difficult to obtain its value from voltage measurements because it has an implicit form. If it can be express...Van der Pauw's function is often used in the measurement of a semiconductor's resistivity. However, it is difficult to obtain its value from voltage measurements because it has an implicit form. If it can be expressed as a polynomial, a semiconductor's resistivity can be obtained from such measurements. Normally, five orders of the abscissa can provide sufficient precision during the expression of any non-linear function. Therefore, the key is to determine the coefficients of the polynomial. By taking five coefficients as weights to construct a neuronetwork, neurocomputing has been used to solve this problem. Finally, the polynomial expression for van der Pauw's function is obtained.展开更多
Exploring structural characteristics implied in initialdecision making information is an important issue in the process of aggregation. In this paper we provide a new family of aggregation operator called density weig...Exploring structural characteristics implied in initialdecision making information is an important issue in the process of aggregation. In this paper we provide a new family of aggregation operator called density weighted averaging operator(abbreviated as DWA operator), which carries out the aggregation by classification. In this case, not only the hidden structural characteristics can be identified, some commonly known aggregation operators can also be incorporated into the function of the DWA operator. We further discuss the basic properties of this new operator, such as commutativity, idempotency, boundedness and monotonicity withcertain condition. Afterwards, two important issues related to the DWA operator are investigated, including the arguments partition and the determination of density weights. At last a numerical example regarding performance evaluation of employees is developed to illustrate the using of this new operator.展开更多
The aim of this paper is to study the adjoint action for the quantum algebra Uq(f(K, H)), which is a natural generalization of quantum algebra Uq(sl2) and is regarded as a class of generalized Weyl algebra..The ...The aim of this paper is to study the adjoint action for the quantum algebra Uq(f(K, H)), which is a natural generalization of quantum algebra Uq(sl2) and is regarded as a class of generalized Weyl algebra..The structure theorem of its locally finite subalgebra F(Uq(f(K, H))) is given.展开更多
When there is substantial heterogeneity of treatment effectiveness for comparative treatmentselection, it is crucial to identify individualised treatment rules for patients who have heterogeneous responses to treatmen...When there is substantial heterogeneity of treatment effectiveness for comparative treatmentselection, it is crucial to identify individualised treatment rules for patients who have heterogeneous responses to treatment. Existing approaches include directly modelling clinical outcomeby defining the optimal treatment rule according to the interactions between treatment andcovariates and outcome weighted approach that uses clinical outcome as weights to maximise atarget function whose value directly reflects correct treatment assignment. All existing articles ofestimating individualised treatment rules are all assuming just two treatment assignments. Herewe propose an outcome weighted learning approach that uses a vector hinge loss to extend estimating individualised treatment rules in multi-category treatments case. The consistency of theresulting estimator is shown. We also demonstrate the performance of our approach in simulationstudies and a real data analysis.展开更多
In this paper,we discuss the existence of stationary oscillations of certain large-scale nonlinear time-delay systems by weighted vector Liapunov functions and obtain a simple sufficiency criterion,which is independen...In this paper,we discuss the existence of stationary oscillations of certain large-scale nonlinear time-delay systems by weighted vector Liapunov functions and obtain a simple sufficiency criterion,which is independent of delays.展开更多
文摘Node of network has lots of information, such as topology, text and label information. Therefore, node classification is an open issue. Recently, one vector of node is directly connected at the end of another vector. However, this method actually obtains the performance by extending dimensions and considering that the text and structural information are one-to-one, which is obviously unreasonable. Regarding this issue, a method by weighting vectors is proposed in this paper. Three methods, negative logarithm, modulus and sigmoid function are used to weight-trained vectors, then recombine the weighted vectors and put them into the SVM classifier for evaluation output. By comparing three different weighting methods, the results showed that using negative logarithm weighting achieved better results than the other two using modulus and sigmoid function weighting, and was superior to directly concatenating vectors in the same dimension.
基金This research is funded by Prince Sattam BinAbdulaziz University,Grant Number IF-PSAU-2021/01/18921.
文摘Renewable energy sources are gaining popularity,particularly photovoltaic energy as a clean energy source.This is evident in the advancement of scientific research aimed at improving solar cell performance.Due to the non-linear nature of the photovoltaic cell,modeling solar cells and extracting their parameters is one of the most important challenges in this discipline.As a result,the use of optimization algorithms to solve this problem is expanding and evolving at a rapid rate.In this paper,a weIghted meaN oF vectOrs algorithm(INFO)that calculates the weighted mean for a set of vectors in the search space has been applied to estimate the parameters of solar cells in an efficient and precise way.In each generation,the INFO utilizes three operations to update the vectors’locations:updating rules,vector merging,and local search.The INFO is applied to estimate the parameters of static models such as single and double diodes,as well as dynamic models such as integral and fractional models.The outcomes of all applications are examined and compared to several recent algorithms.As well as the results are evaluated through statistical analysis.The results analyzed supported the proposed algorithm’s efficiency,accuracy,and durability when compared to recent optimization algorithms.
文摘Risk management of projects is about the real time ev aluation and making of decisions proactively in order to maximize the probabilit y of achieving or surpassing the targets set for project objectives. Project objective generally includes three elements: time, cost, quality. Risk occurrin g in the projects will affect these three factors to some various degrees in the end. There are different emphases in each stage and integrated balanced goals b etween the three factors. A large complex engineering project generally consists of several stages each of which has variable objective combinations leading to variable important risks. In order to achieve strategic goals on the schedule under the restriction of lim ited resources, the paper gives the analysis of the so-called risk identificati on-assessment process on the basis of objective orientation. In this paper the set of involved mostly hazards is presented in terms of given objective weight v ector, and so is the model of risk ranking .By reducing the range of risk factor s step by step, risk manager could pay more attention to important ventures and effectively control of them. According to different objective combination at different stages, primary risk f actor sets at different stages are given. With the probability and their various effects to project objectives, evaluation of these sets is made aiming to r educing of the scope of risks and providing decision maker with a better decisio ns support. Successful projects are those, which focus on the relevant business objectives t hroughout the whole process and seek to information integration across project l ife cycle. This paper also introduces the idea of real time process of risk iden tification-assessment and presents a flow chart as a demonstration.
文摘Van der Pauw's function is often used in the measurement of a semiconductor's resistivity. However, it is difficult to obtain its value from voltage measurements because it has an implicit form. If it can be expressed as a polynomial, a semiconductor's resistivity can be obtained from such measurements. Normally, five orders of the abscissa can provide sufficient precision during the expression of any non-linear function. Therefore, the key is to determine the coefficients of the polynomial. By taking five coefficients as weights to construct a neuronetwork, neurocomputing has been used to solve this problem. Finally, the polynomial expression for van der Pauw's function is obtained.
基金Supported by the National Natural Science Foundation of China(71671031,71701040)
文摘Exploring structural characteristics implied in initialdecision making information is an important issue in the process of aggregation. In this paper we provide a new family of aggregation operator called density weighted averaging operator(abbreviated as DWA operator), which carries out the aggregation by classification. In this case, not only the hidden structural characteristics can be identified, some commonly known aggregation operators can also be incorporated into the function of the DWA operator. We further discuss the basic properties of this new operator, such as commutativity, idempotency, boundedness and monotonicity withcertain condition. Afterwards, two important issues related to the DWA operator are investigated, including the arguments partition and the determination of density weights. At last a numerical example regarding performance evaluation of employees is developed to illustrate the using of this new operator.
基金Foundation item: the National Natural Science Foundation of China (No. 10871227) the Science Foundation of Hebei Province (No. 2008000135).
文摘The aim of this paper is to study the adjoint action for the quantum algebra Uq(f(K, H)), which is a natural generalization of quantum algebra Uq(sl2) and is regarded as a class of generalized Weyl algebra..The structure theorem of its locally finite subalgebra F(Uq(f(K, H))) is given.
基金The author would like to thank Jun Shao and Menggang Yu for their help with preparing the manuscript.This work was supported by the Chinese 111 Project[grant number B14019](for Lou and Shao).
文摘When there is substantial heterogeneity of treatment effectiveness for comparative treatmentselection, it is crucial to identify individualised treatment rules for patients who have heterogeneous responses to treatment. Existing approaches include directly modelling clinical outcomeby defining the optimal treatment rule according to the interactions between treatment andcovariates and outcome weighted approach that uses clinical outcome as weights to maximise atarget function whose value directly reflects correct treatment assignment. All existing articles ofestimating individualised treatment rules are all assuming just two treatment assignments. Herewe propose an outcome weighted learning approach that uses a vector hinge loss to extend estimating individualised treatment rules in multi-category treatments case. The consistency of theresulting estimator is shown. We also demonstrate the performance of our approach in simulationstudies and a real data analysis.
文摘In this paper,we discuss the existence of stationary oscillations of certain large-scale nonlinear time-delay systems by weighted vector Liapunov functions and obtain a simple sufficiency criterion,which is independent of delays.